scholarly journals Study on Numerical Simulation of Fire Danger Area Division in Mine Roadway

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Hu Wen ◽  
Yin Liu ◽  
Jun Guo ◽  
Ze Zhang ◽  
Mingyang Liu ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
High Temperature ◽  
Gas Flow ◽  
Concentration Field ◽  
Environmental Parameters ◽  
Simulation Method ◽  
Development Stage ◽  
Calculation Model ◽  
Mine Fire ◽  
Mine Roadway

High-temperature poisonous smoke produced by coal mine roadway fire seriously affects miners' lives and safety. Studying the development law of high-temperature smoke in the process of mine roadway fire and then exploring the danger of roadway are of great significance to personnel safety and post-disaster rescue. In order to study this problem, the CFD numerical simulation method is used to establish a fire calculation model based on ANSYS Fluent software in the development stage of mine fire. The high-temperature flue gas flow in the roadway during the development stage of mine fire is simulated, and the variation law of temperature field and gas concentration field with time and space position under different levels of roadway in the development stage of fire is revealed. The variation rules of environmental parameters, such as temperature, CO, and CO2, are obtained by numerical calculation. Based on these, the danger zones of smoke spread in fire development stage are divided by the critical values of high-temperature smoke and toxicity evaluation index, and the mathematical fitting analysis of the evolution of the dangerous area with time is carried out. The research results have certain theoretical guiding significance for reducing underground environmental pollution and ensuring the personal safety of workers and rescuers.

Heat Exchange Calculation of a Regenerative Air Heater with Numerical Simulation Method

2013 ◽  
Vol 860-863 ◽  
pp. 1416-1419
Author(s):  
Ri Guang Wei ◽  
Zhen Xiao Qu ◽  
Jian Qiang Gao
Keyword(s):  
Numerical Simulation ◽  
Simulation Method ◽  
Calculation Model ◽  
Design Parameters ◽  
Practical Calculation ◽  
Air Preheater ◽  
Air Heater ◽  
Pulverized Coal Boiler ◽  
Set Up ◽  
Coal Boiler

According to the structure and working principle of rotary air preheater,the heat transfer calculation model is set up with reasonable simplification. Combining with the design parameters of the rotary air preheater of a 400 t/h pulverized coal boiler unit ,the results of practical calculation show that the said thermodynamic calculation method not only has higher precision of calculation,but also can get the temperature distributions of the gas, air and heat surface in each cross-section of the rotary air preheater. The result of numerical simulation calculation tallies well with the original designed data. It can be used for the heat calculation both two-sectorial and three-sectorial air heater; it can be used for performance analysis of the regenerative air heater.

Numerical Simulation of High-Temperature Air Direct-Ignition of Pulverized Coal

2005 ◽  
Author(s):  
Z. Z. Kang ◽  
B. M. Sun ◽  
Y. H. Guo ◽  
W. Zhang ◽  
H. Q. Wei
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
High Temperature ◽  
Simulation Method ◽  
Pulverized Coal ◽  
Inlet Velocity ◽  
Operation Optimization ◽  
Structure Improvement ◽  
Simulation Results ◽  
Direct Ignition

Numerical simulation method is employed in this article to investigate various high-temperature air direct-ignition processes of pulverized coal (PC). Several important factors are analyzed, which are the inlet velocity of primary air flow, PC concentration and the velocity and temperature of high temperature air. The flow, combustion and heat transfer in high temperature air oil-free ignition burner can also be obtained from the simulation results, which are in accordance with the experimental data. The research provides guidance for structure improvement and operation optimization of burner.

Numerical Research on the Floor Heave Control of Deep Roadway in Coal Mining

2012 ◽  
Vol 524-527 ◽  
pp. 446-449 ◽  
Author(s):  
Fu Kun Xiao ◽  
Chun Jie Zhang ◽  
Li Wei Gao ◽  
Yang Yang Yue
Keyword(s):  
Numerical Simulation ◽  
Simulation Method ◽  
Good Effect ◽  
Optimal Program ◽  
Anchor Cable ◽  
Geological Conditions ◽  
Floor Heave ◽  
Mine Roadway ◽  
Numerical Research ◽  
Main Factors

On the engineering background of coal mine roadway orbit, according to the destruction of its original roadway, the paper have analyzed the situation of the deformation in the roadway , using the method of numerical simulation. Besides, it also determined the stress distribution and the forces supporting of roadway in the deformation process. Geological conditions, support patterns and bad construction are considered as the main factors of roadway damage and new support method is given. Numerical simulation method is used to study mechanism about anchor rod, anchor cable and anchor mesh coupled with the surrounding, bottom corner anchor rod and grouting to determine the optimal program. The new program is applied to the practice field and monitored, indicating that the application has a very good effect.

scholarly journals Numerical Simulation of the Effect of Dynamic Stress on the Rock Surrounding a Mine Roadway

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Jun-hua Xue ◽  
Ke-liang Zhan ◽  
Xuan-hong Du ◽  
Qian Ma
Keyword(s):  
Numerical Simulation ◽  
Rock Mass ◽  
Rock Burst ◽  
Dynamic Stress ◽  
Simulation Method ◽  
Mining Areas ◽  
Geological Conditions ◽  
Mine Roadway ◽  
The Stability ◽  
Two Sides

In view of the damage of dynamic stress to the rock surrounding a mine roadway during coal mining, based on the actual geological conditions of Zhuji mine in Huainan, China, a UDEC model was established to study the influences of the thickness and strength of the direct roof above the coal seam and the anchorage effect on the stability of the roadway. The failure mechanism and effect of the dynamic stress on the rock surrounding a mine roadway were revealed. Under dynamic stress, cracks appear near the side of the roadway where the stress is concentrated. These cracks rapidly expand to the two sides of coal and rock mass. At the same time, the coal and rock mass at the top of the roadway fall, and finally, the two sides of coal and rock mass were broken and ejected into the roadway, causing a rock burst. However, when the same dynamic stress is applied to the roadway after supports are installed, there is no large-deformation failure in the roadway, which shows that, under certain conditions, rock bolting can improve the stability and seismic resistance of the surrounding coal and rock mass. Furthermore, by simulating the failure of surrounding rock with different strengths and thicknesses in the immediate roof, it is found that the thinner the roof, the greater the influence of the dynamic stress on the roadway; the stronger the roof is, the more likely the rock burst will occur with greater intensity under the same dynamic stress. A numerical simulation method was used to analyze the factors influencing rock bursting. The results provide a theoretical basis for research into the causes and prevention of rock bursts in deep mining areas.

Research on Residual Oil Distribution Regular with the Application of Facies Controlled Modeling and Reservoir Numerical Simulation

2012 ◽  
Vol 616-618 ◽  
pp. 126-132 ◽  
Author(s):  
Hua Bin Wei ◽  
Shang Ming Shi ◽  
Pan Zhao ◽  
Dong Kai Huo ◽  
Wan Zhen Zhu
Keyword(s):  
Numerical Simulation ◽  
Three Dimensional ◽  
Simulation Method ◽  
Structural Features ◽  
Development Stage ◽  
Water Flooding ◽  
Residual Oil ◽  
Distribution Law ◽  
North West ◽  
Oil Distribution

The high water cut stage on the residual oil distribution regularity in late development stage of oilfield is difficult in Daqing oilfield, North West Water Flooding fine demonstration zone development time is long, well under the complicated characteristic, adopts phase control of three-dimensional geological modeling and the method of reservoir numerical simulation in the demonstration zone, structural features and sedimentary characteristics of based on the establishment of demonstration zone, three-dimensional geological model. Through the application of fine reservoir numerical simulation method for the numerical simulation of remaining oil, and a summary of the demonstration zone of residual oil distribution law and cause of formation, provides reliable basis for the next step of oilfield development adjustment.

Research on Numerical Simulation Method for 3D Complex Flow in Rotating Machinery

2012 ◽  
Vol 226-228 ◽  
pp. 52-55
Author(s):  
Guang Yu Du ◽  
Zhen Tan ◽  
Wei An ◽  
De Сhun Ba
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Gas Flow ◽  
Turbulence Models ◽  
Simulation Method ◽  
Rotating Machinery ◽  
Field Analysis ◽  
Complex Flow ◽  
Structure Interaction ◽  
Numerical Simulation Method

A numerical simulation method with gas-structure interaction to analyze 3D complex flow in rotating machinery was presented and the effects with different aerodynamic turbulence model for gas-structure interaction was also presented. The blades are an important component in rotating machinery. Gas flow is unsteady three-dimensional turbulence motion with transient and anisotropic. Then the gas flow and the vibration of rotating blades interfere with each other, resulting in a complex coupling effect. It affects the machine efficiency directly. For discussing the effects on flow field of the coupling field, the blade model was built. And flow around the blades was simulated by gas-structure interaction with three turbulence models respectively. The turbulence models were standard κ-ε, renormalization group κ-ε and Smagorinsky LES. A feasible method was provided for flow field analysis in rotating machinery.

Development of Numerical Simulation Method for Melt Relocation Behavior in Nuclear Reactors: Validation of Applicability for Actual Core Support Structures

2016 ◽  
Author(s):  
Susumu Yamashita ◽  
Kazuyuki Tokushima ◽  
Masaki Kurata ◽  
Kazuyuki Takase ◽  
Hiroyuki Yoshida
Keyword(s):  
Numerical Simulation ◽  
High Temperature ◽  
Computer Aided Design ◽  
Nuclear Power ◽  
Radiation Heat Transfer ◽  
Three Dimensional ◽  
Simulation Models ◽  
Simulation Method ◽  
Transfer Model ◽  
Simulation Code

In order to precisely investigate molten core relocation behavior in the Fukushima Daiichi nuclear power station, we have developed the detailed and phenomenological numerical simulation code named JUPITER for predicting the molten core behavior including solidification and relocation based on the three-dimensional multiphase thermal-hydraulic simulation models. At the moment, multicomponent analysis method which can be treated any number of component as a fluid or solid body, Zr-water reaction model and simple radiation heat transfer model were implemented and showed that multicomponent melt flow and its solidification were confirmed in the simplified core structure system. However, the validation of the JUPITER using high temperature molten material has not been performed yet. In this paper, in order to evaluate the validity of the JUPITER, especially, for high temperature melt relocation experiment, we compared between numerical and experimental results for that system. As a result, qualitatively reasonable result was obtained. And also we performed melt relocation simulation on actual core structures designed by three dimensional CAD (Computer-Aided Design) and then we estimated phenomena which might be actually occurred in SAs.

The Simulation and Experiment Study on the Gas Flow in the No-Loaded and Cold Vacuum High-Pressure Gas Quenching Furnace

2011 ◽  
Vol 48-49 ◽  
pp. 1310-1314
Author(s):  
Zhi Jian Wang ◽  
Xiao Feng Shang
Keyword(s):  
Numerical Simulation ◽  
High Pressure ◽  
Gas Flow ◽  
Flow Distribution ◽  
Simulation Method ◽  
Flow State ◽  
Gas Quenching ◽  
Simulation And Experiment ◽  
Simulation Results ◽  
The One

In order to learn gas flow state in the vacuum high pressure gas quenching furnace, this paper simulates and tests the gas flow under the no-loaded and cold state. Hot wire anemometer is used to measure the speeds of some feature points, on the one hand to provide boundary conditions for the numerical simulation, and on the other hand to compare with the numerical simulation results. FLUENT software is used to simulate the gas flow of nozzle-type vacuum high-pressure gas quenching furnace. The results show that at the center of the furnace appears high-pressure low-speed zone in which is resulted by the gas collision there, and the vortex also appears in the area around the furnace. The results mean that the cooling rate of works will be slow there. Different exit velocities of five nozzles cause the uneven flow distribution, which will affect the cooling uniformity of works. The comparison between the simulation results and the measured results shows that the error is within 10%. It means that numerical simulation method to predict gas flow is feasible and the results are reliable in high pressure gas quenching furnace.

scholarly journals Study on the Vortex in a Pump Sump and Its Influence on the Pump Unit

2022 ◽  
Vol 10 (1) ◽  
pp. 103
Author(s):  
Xijie Song ◽  
Chao Liu ◽  
Zhengwei Wang
Keyword(s):  
Numerical Simulation ◽  
Negative Pressure ◽  
Vortex Core ◽  
Vortex Tube ◽  
Simulation Method ◽  
Development Stage ◽  
Pump Unit ◽  
Pump Performance ◽  
Pump Sump ◽  
Attached Vortex

The vortex in a pump sump is a negative problem for the pump unit, which can lead to the decline of pump performance. Focusing on the internal pressure characteristics of the floor-attached vortex (FAV) and its influence on the pump unit, the FAV was analyzed adopting the previously verified numerical simulation method and experiment. The results show that the pressure in the vortex core gradually decreases with time, drops to a negative pressure at the development stage, and then reaches the lowest pressure during the continuance stage. When the negative pressure of the vortex tube is around the vaporization pressure of the continuance stage, it can cause a local cavitation at the impeller inlet. The evolution of the FAV is accompanied by a change of pressure gradient in the vortex core which is discussed in detail. This research provides theoretical guidance for a better understanding of the vortex characteristics and the optimal design for the pump.

Sign in / Sign up

Export Citation Format

Share Document