Subgrid-Scale Variability for Thermodynamic Variables in an Offline Land Surface Prediction System

2015 ◽  
Vol 17 (1) ◽  
pp. 171-193 ◽  
Author(s):  
Mélanie C. Rochoux ◽  
Stéphane Bélair ◽  
Maria Abrahamowicz ◽  
Pierre Pellerin
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
Horizontal Resolution ◽  
Prediction System ◽  
Subgrid Scale ◽  
Grid Spacing ◽  
Model Bias ◽  
Near Surface ◽  
Surface Prediction ◽  
The Impact

Abstract This study presents a numerical analysis of the impact of the horizontal resolution on the forecast capability of the Canadian offline land surface prediction system (SPS; formerly known as GEM-Surf) forced by the 15-km Global Environmental Multiscale (GEM) atmospheric model. This system is used to quantify on a statistical basis the subgrid-scale variability of (near-)surface variables for 25-km grid spacing based on the 2.5- or 10-km SPS run at regional scale over the 2012 summer season. The model bias and the distributions characterizing the subgrid-scale variability drastically depend on the geographic areas as well as on the diurnal cycle. These results show the benefits of high-resolution land surface simulations to account for length scales that are more consistent with the scales at which the actual land surface balance is affected by the heterogeneous geophysical fields (i.e., roughness length, land–water mask, glacier mask, and soil texture). The model bias results highlight the potential of an SPS–GEM two-way coupling strategy for refining predictions near the surface through the upscaling of high-resolution surface heat fluxes to the coarser atmospheric grid spacing, with these fluxes being significantly different from those explicitly resolved at 25 km and featuring nonlinear behavior with respect to the horizontal resolution. Since the computational power of meteorological operational centers progressively increases, making it possible to run high-resolution limited-area models, solving the surface at high resolution in a surface–atmosphere fully coupled system becomes a key aspect for improving numerical weather and environmental forecast performance.

Evaluating the role of soil physical properties on simulated land-atmosphere interactions over South Africa using coupled atmosphere-hydrological modeling

2021 ◽  
Author(s):  
Zhenyu Zhang ◽  
Patrick Laux ◽  
Joël Arnault ◽  
Jianhui Wei ◽  
Jussi Baade ◽  
...  
Keyword(s):  
South Africa ◽  
Physical Properties ◽  
Land Degradation ◽  
Land Surface ◽  
Soil Physical Properties ◽  
Near Surface ◽  
Soil Database ◽  
Global Soil ◽  
The Impact

<p>Land degradation with its direct impact on vegetation, surface soil layers and land surface albedo, has great relevance with the climate system. Assessing the climatic and ecological effects induced by land degradation requires a precise understanding of the interaction between the land surface and atmosphere. In coupled land-atmosphere modeling, the low boundary conditions impact the thermal and hydraulic exchanges at the land surface, therefore regulates the overlying atmosphere by land-atmosphere feedback processes. However, those land-atmosphere interactions are not convincingly represented in coupled land-atmosphere modeling applications. It is partly due to an approximate representation of hydrological processes in land surface modeling. Another source of uncertainties relates to the generalization of soil physical properties in the modeling system. This study focuses on the role of the prescribed physical properties of soil in high-resolution land surface-atmosphere simulations over South Africa. The model used here is the hydrologically-enhanced Weather Research and Forecasting (WRF-Hydro) model. Four commonly used global soil datasets obtained from UN Food and Agriculture Organization (FAO) soil database, Harmonized World Soil Database (HWSD), Global Soil Dataset for Earth System Model (GSDE), and SoilGrids dataset, are incorporated within the WRF-Hydro experiments for investigating the impact of soil information on land-atmosphere interactions. The simulation results of near-surface temperature, skin temperature, and surface energy fluxes are presented and compared to observational-based reference dataset. It is found that simulated soil moisture is largely influenced by soil texture features, which affects its feedback to the atmosphere.</p>

scholarly journals Dome effect of black carbon and its key influencing factors: A one-dimensional modelling study

2017 ◽  
Author(s):  
Zilin Wang ◽  
Xin Huang ◽  
Aijun Ding
Keyword(s):  
Boundary Layer ◽  
Air Pollution ◽  
Black Carbon ◽  
Rural Areas ◽  
Land Surface ◽  
Critical Role ◽  
Aerosol Layer ◽  
Near Surface ◽  
Haze Pollution ◽  
The Impact

Abstract. Black carbon (BC) has been identified to play a critical role in aerosol-planet boundary layer (PBL) interaction and further deterioration of near-surface air pollution in megacities, which has been named as its dome effect. However, the impacts of key factors that influence this effect, such as the vertical distribution and aging processes of BC, and also the underlying land surface, have not been quantitatively explored yet. Here, based on available in-situ measurements of meteorology and atmospheric aerosols together with the meteorology-chemistry online coupled model, WRF-Chem, we conduct a set of parallel simulations to quantify the roles of these factors in influencing the BC's dome effect and surface haze pollution, and discuss the main implications of the results to air pollution mitigation in China. We found that the impact of BC on PBL is very sensitive to the altitude of aerosol layer. The upper level BC, especially those near the capping inversion, is more essential in suppressing the PBL height and weakening the turbulence mixing. The dome effect of BC tends to be significantly intensified as BC aerosol mixed with scattering aerosols during winter haze events, resulting in a decrease of PBL height by more than 25 %. In addition, the dome effect is more substantial (up to 15 %) in rural areas than that in the urban areas with the same BC loading, indicating an unexpected regional impact of such kind of effect to air quality in countryside. This study suggests that China's regional air pollution would greatly benefit from BC emission reductions, especially those from the elevated sources from the chimneys and also the domestic combustions in rural areas, through weakening the aerosol-boundary layer interactions that triggered by BC.

scholarly journals Continuous high-resolution midlatitude-belt simulations for July–August 2013 with WRF

2017 ◽  
Vol 10 (5) ◽  
pp. 2031-2055 ◽  
Author(s):  
Thomas Schwitalla ◽  
Hans-Stefan Bauer ◽  
Volker Wulfmeyer ◽  
Kirsten Warrach-Sagi
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
Large Scale ◽  
Temperature Fields ◽  
Surface Model ◽  
Limited Area ◽  
Data Set ◽  
Latitude Belt ◽  
Simulated Precipitation ◽  
The Impact

Abstract. Increasing computational resources and the demands of impact modelers, stake holders, and society envision seasonal and climate simulations with the convection-permitting resolution. So far such a resolution is only achieved with a limited-area model whose results are impacted by zonal and meridional boundaries. Here, we present the setup of a latitude-belt domain that reduces disturbances originating from the western and eastern boundaries and therefore allows for studying the impact of model resolution and physical parameterization. The Weather Research and Forecasting (WRF) model coupled to the NOAH land–surface model was operated during July and August 2013 at two different horizontal resolutions, namely 0.03 (HIRES) and 0.12° (LOWRES). Both simulations were forced by the European Centre for Medium-Range Weather Forecasts (ECMWF) operational analysis data at the northern and southern domain boundaries, and the high-resolution Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) data at the sea surface.The simulations are compared to the operational ECMWF analysis for the representation of large-scale features. To analyze the simulated precipitation, the operational ECMWF forecast, the CPC MORPHing (CMORPH), and the ENSEMBLES gridded observation precipitation data set (E-OBS) were used as references.Analyzing pressure, geopotential height, wind, and temperature fields as well as precipitation revealed (1) a benefit from the higher resolution concerning the reduction of monthly biases, root mean square error, and an improved Pearson skill score, and (2) deficiencies in the physical parameterizations leading to notable biases in distinct regions like the polar Atlantic for the LOWRES simulation, the North Pacific, and Inner Mongolia for both resolutions.In summary, the application of a latitude belt on a convection-permitting resolution shows promising results that are beneficial for future seasonal forecasting.

scholarly journals Sensitivity of biogenic volatile organic compounds to land surface parameterizations and vegetation distributions in California

2016 ◽  
Vol 9 (5) ◽  
pp. 1959-1976 ◽  
Author(s):  
Chun Zhao ◽  
Maoyi Huang ◽  
Jerome D. Fast ◽  
Larry K. Berg ◽  
Yun Qian ◽  
...  
Keyword(s):  
Air Quality ◽  
Volatile Organic Compounds ◽  
Organic Compounds ◽  
Land Surface ◽  
Aerosol Formation ◽  
Biogenic Volatile Organic Compounds ◽  
Vegetation Map ◽  
Near Surface ◽  
Volatile Organic ◽  
The Impact

Abstract. Current climate models still have large uncertainties in estimating biogenic trace gases, which can significantly affect atmospheric chemistry and secondary aerosol formation that ultimately influences air quality and aerosol radiative forcing. These uncertainties result from many factors, including uncertainties in land surface processes and specification of vegetation types, both of which can affect the simulated near-surface fluxes of biogenic volatile organic compounds (BVOCs). In this study, the latest version of Model of Emissions of Gases and Aerosols from Nature (MEGAN v2.1) is coupled within the land surface scheme CLM4 (Community Land Model version 4.0) in the Weather Research and Forecasting model with chemistry (WRF-Chem). In this implementation, MEGAN v2.1 shares a consistent vegetation map with CLM4 for estimating BVOC emissions. This is unlike MEGAN v2.0 in the public version of WRF-Chem that uses a stand-alone vegetation map that differs from what is used by land surface schemes. This improved modeling framework is used to investigate the impact of two land surface schemes, CLM4 and Noah, on BVOCs and examine the sensitivity of BVOCs to vegetation distributions in California. The measurements collected during the Carbonaceous Aerosol and Radiative Effects Study (CARES) and the California Nexus of Air Quality and Climate Experiment (CalNex) conducted in June of 2010 provided an opportunity to evaluate the simulated BVOCs. Sensitivity experiments show that land surface schemes do influence the simulated BVOCs, but the impact is much smaller than that of vegetation distributions. This study indicates that more effort is needed to obtain the most appropriate and accurate land cover data sets for climate and air quality models in terms of simulating BVOCs, oxidant chemistry and, consequently, secondary organic aerosol formation.

scholarly journals Impact of ASAR soil moisture data on the MM5 precipitation forecast for the Tanaro flood event of April 2009

2011 ◽  
Vol 11 (12) ◽  
pp. 3135-3149 ◽  
Author(s):  
G. Panegrossi ◽  
R. Ferretti ◽  
L. Pulvirenti ◽  
N. Pierdicca
Keyword(s):  
Soil Moisture ◽  
High Resolution ◽  
Land Surface ◽  
Ground Truth ◽  
Rain Gauge ◽  
Precipitation Forecast ◽  
Flood Event ◽  
Strong Impact ◽  
Moisture Field ◽  
The Impact

Abstract. The representation of land-atmosphere interactions in weather forecast models has a strong impact on the Planetary Boundary Layer (PBL) and, in turn, on the forecast. Soil moisture is one of the key variables in land surface modelling, and an inadequate initial soil moisture field can introduce major biases in the surface heat and moisture fluxes and have a long-lasting effect on the model behaviour. Detecting the variability of soil characteristics at small scales is particularly important in mesoscale models because of the continued increase of their spatial resolution. In this paper, the high resolution soil moisture field derived from ENVISAT/ASAR observations is used to derive the soil moisture initial condition for the MM5 simulation of the Tanaro flood event of April 2009. The ASAR-derived soil moisture field shows significantly drier conditions compared to the ECMWF analysis. The impact of soil moisture on the forecast has been evaluated in terms of predicted precipitation and rain gauge data available for this event have been used as ground truth. The use of the drier, highly resolved soil moisture content (SMC) shows a significant impact on the precipitation forecast, particularly evident during the early phase of the event. The timing of the onset of the precipitation, as well as the intensity of rainfall and the location of rain/no rain areas, are better predicted. The overall accuracy of the forecast using ASAR SMC data is significantly increased during the first 30 h of simulation. The impact of initial SMC on the precipitation has been related to the change in the water vapour field in the PBL prior to the onset of the precipitation, due to surface evaporation. This study represents a first attempt to establish whether high resolution SAR-based SMC data might be useful for operational use, in anticipation of the launch of the Sentinel-1 satellite.

scholarly journals High-resolution fully-coupled atmospheric–hydrological modeling: a cross-compartment regional water and energy cycle evaluation

2020 ◽  
Author(s):  
Benjamin Fersch ◽  
Alfonso Senatore ◽  
Bianca Adler ◽  
Joël Arnault ◽  
Matthias Mauder ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Land Surface ◽  
Hydrological Modeling ◽  
Weather Prediction ◽  
Surface Model ◽  
Near Surface ◽  
Ground Heat Flux ◽  
The Impact ◽  
Fully Coupled ◽  
Regional Water

<p>The land surface and the atmospheric boundary layer are closely intertwined with respect to the exchange of water, trace gases and energy. Nonlinear feedback and scale dependent mechanisms are obvious by observations and theories. Modeling instead is often narrowed to single compartments of the terrestrial system or bound to traditional viewpoints of definite scientific disciplines. Coupled terrestrial hydrometeorological modeling systems attempt to overcome these limitations to achieve a better integration of the processes relevant for regional climate studies and local area weather prediction. We examine the ability of the hydrologically enhanced version of the Weather Research and Forecasting Model (WRF-Hydro) to reproduce the regional water cycle by means of a two-way coupled approach and assess the impact of hydrological coupling with respect to a traditional regional atmospheric model setting. It includes the observation-based calibration of the hydrological model component (offline WRF-Hydro) and a comparison of the classic WRF and the fully coupled WRF-Hydro models both with identical calibrated parameter settings for the land surface model (Noah-MP). The simulations are evaluated based on extensive observations at the pre-Alpine Terrestrial Environmental Observatory (TERENO Pre-Alpine) for the Ammer (600 km²) and Rott (55 km²) river catchments in southern Germany, covering a five month period (Jun–Oct 2016).</p><p>The sensitivity of 7 land surface parameters is tested using the <em>Latin-Hypercube One-factor-At-a-Time</em> (LH-OAT) method and 6 sensitive parameters are subsequently optimized for 6 different subcatchments, using the Model-Independent <em>Parameter Estimation and Uncertainty Analysis software</em> (PEST).</p><p>The calibration of the offline WRF-Hydro leads to Nash-Sutcliffe efficiencies between 0.56 and 0.64 and volumetric efficiencies between 0.46 and 0.81 for the six subcatchments. The comparison of classic WRF and fully coupled WRF-Hydro shows only tiny alterations for radiation and precipitation but considerable changes for moisture- and energy fluxes. By comparison with TERENO Pre-Alpine observations, the fully coupled model slightly outperforms the classic WRF with respect to evapotranspiration, sensible and ground heat flux, near surface mixing ratio, temperature, and boundary layer profiles of air temperature. The subcatchment-based water budgets show uniformly directed variations for evapotranspiration, infiltration excess and percolation whereas soil moisture and precipitation change randomly.</p>

scholarly journals The Impact of Initial Snow Conditions on the Numerical Weather Simulation of a Northern Rockies Atmospheric River

2021 ◽  
Vol 22 (1) ◽  
pp. 155-167
Author(s):  
William Rudisill ◽  
Alejandro Flores ◽  
James McNamara
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
Weather Prediction ◽  
Hydrologic Model ◽  
Radiative Properties ◽  
Numerical Weather ◽  
Atmospheric River ◽  
Surface Snow ◽  
Snow Conditions ◽  
The Impact

AbstractSnow’s thermal and radiative properties strongly impact the land surface energy balance and thus the atmosphere above it. Land surface snow information is poorly known in mountainous regions. Few studies have examined the impact of initial land surface snow conditions in high-resolution, convection-permitting numerical weather prediction models during the midlatitude cool season. The extent to which land surface snow influences atmospheric energy transport and subsequent surface meteorological states is tested using a high-resolution (1 km) configuration of the Weather Research and Forecasting (WRF) Model, for both calm conditions and weather characteristic of a warm late March atmospheric river. A set of synthetic but realistic snow states are used as initial conditions for the model runs and the resulting differences are compared. We find that the presence (absence) of snow decreases (increases) 2-m air temperatures by as much as 4 K during both periods, and that the atmosphere responds to snow perturbations through advection of moist static energy from neighboring regions. Snow mass and snow-covered area are both important variables that influence 2-m air temperature. Finally, the meteorological states produced from the WRF experiments are used to force an offline hydrologic model, demonstrating that snowmelt rates can increase/decrease by factor of 2 depending on the initial snow conditions used in the parent weather model. We propose that more realistic representations of land surface snow properties in mesoscale models may be a source of hydrometeorological predictability

scholarly journals Assessing the Impact of Changes in Land Surface Conditions on WRF Predictions in Arid Regions

2020 ◽  
Vol 21 (12) ◽  
pp. 2829-2853 ◽  
Author(s):  
Marouane Temimi ◽  
Ricardo Fonseca ◽  
Narendra Nelli ◽  
Michael Weston ◽  
Mohan Thota ◽  
...  
Keyword(s):  
Eddy Covariance ◽  
Soil Texture ◽  
Land Surface ◽  
Surface Wind ◽  
Surface Fluxes ◽  
Abu Dhabi ◽  
Horizontal Wind ◽  
Cold Bias ◽  
Near Surface ◽  
The Impact

AbstractA thorough evaluation of the Weather Research and Forecasting (WRF) Model is conducted over the United Arab Emirates, for the period September 2017–August 2018. Two simulations are performed: one with the default model settings (control run), and another one (experiment) with an improved representation of soil texture and land use land cover (LULC). The model predictions are evaluated against observations at 35 weather stations, radiosonde profiles at the coastal Abu Dhabi International Airport, and surface fluxes from eddy-covariance measurements at the inland city of Al Ain. It is found that WRF’s cold temperature bias, also present in the forcing data and seen almost exclusively at night, is reduced when the surface and soil properties are updated, by as much as 3.5 K. This arises from the expansion of the urban areas, and the replacement of loamy regions with sand, which has a higher thermal inertia. However, the model continues to overestimate the strength of the near-surface wind at all stations and seasons, typically by 0.5–1.5 m s−1. It is concluded that the albedo of barren/sparsely vegetated regions in WRF (0.380) is higher than that inferred from eddy-covariance observations (0.340), which can also explain the referred cold bias. At the Abu Dhabi site, even though soil texture and LULC are not changed, there is a small but positive effect on the predicted vertical profiles of temperature, humidity, and horizontal wind speed, mostly between 950 and 750 hPa, possibly because of differences in vertical mixing.

scholarly journals Effect of the uncertainty in meteorology on air quality model predictions

Időjárás ◽  
2021 ◽  
Vol 125 (4) ◽  
pp. 625-646
Author(s):  
Zita Ferenczi ◽  
Emese Homolya ◽  
Krisztina Lázár ◽  
Anita Tóth
Keyword(s):  
Air Pollution ◽  
Particulate Matter ◽  
Air Quality ◽  
Weather Prediction ◽  
Horizontal Resolution ◽  
Model System ◽  
Air Quality Model ◽  
Quality Model ◽  
Near Surface ◽  
The Impact

An operational air quality forecasting model system has been developed and provides daily forecasts of ozone, nitrogen oxides, and particulate matter for the area of Hungary and three big cites of the country (Budapest, Miskolc, and Pécs). The core of the model system is the CHIMERE off-line chemical transport model. The AROME numerical weather prediction model provides the gridded meteorological inputs for the chemical model calculations. The horizontal resolution of the AROME meteorological fields is consistent with the CHIMERE horizontal resolution. The individual forecasted concentrations for the following 2 days are displayed on a public website of the Hungarian Meteorological Service. It is essential to have a quantitative understanding of the uncertainty in model output arising from uncertainties in the input meteorological fields. The main aim of this research is to probe the response of an air quality model to its uncertain meteorological inputs. Ensembles are one method to explore how uncertainty in meteorology affects air pollution concentrations. During the past decades, meteorological ensemble modeling has received extensive research and operational interest because of its ability to better characterize forecast uncertainty. One such ensemble forecast system is the one of the AROME model, which has an 11-member ensemble where each member is perturbed by initial and lateral boundary conditions. In this work we focus on wintertime particulate matter concentrations, since this pollutant is extremely sensitive to near-surface mixing processes. Selecting a number of extreme air pollution situations we will show what the impact of the meteorological uncertainty is on the simulated concentration fields using AROME ensemble members.

scholarly journals High Resolution Model Intercomparison Project (HighResMIP)

2016 ◽  
Author(s):  
R. J. Haarsma ◽  
M. Roberts ◽  
P. L. Vidale ◽  
C. A. Senior ◽  
A. Bellucci ◽  
...  
Keyword(s):  
High Resolution ◽  
Large Scale ◽  
Computational Cost ◽  
Horizontal Resolution ◽  
Small Scale ◽  
Model Intercomparison ◽  
Resolution Model ◽  
Intercomparison Project ◽  
High Resolution Model ◽  
The Impact

Abstract. Robust projections and predictions of climate variability and change, particularly at regional scales, rely on the driving processes being represented with fidelity in model simulations. The role of enhanced horizontal resolution in improved process representation in all components of the climate system is of growing interest, particularly as some recent simulations suggest the possibility for significant changes in both large-scale aspects of circulation, as well as improvements in small-scale processes and extremes. However, such high resolution global simulations at climate time scales, with resolutions of at least 50 km in the atmosphere and 0.25° in the ocean, have been performed at relatively few research centers and generally without overall coordination, primarily due to their computational cost. Assessing the robustness of the response of simulated climate to model resolution requires a large multi-model ensemble using a coordinated set of experiments. The Coupled Model Intercomparison Project 6 (CMIP6) is the ideal framework within which to conduct such a study, due to the strong link to models being developed for the CMIP DECK experiments and other MIPs. Increases in High Performance Computing (HPC) resources, as well as the revised experimental design for CMIP6, now enables a detailed investigation of the impact of increased resolution up to synoptic weather scales on the simulated mean climate and its variability. The High Resolution Model Intercomparison Project (HighResMIP) presented in this paper applies, for the first time, a multi-model approach to the systematic investigation of the impact of horizontal resolution. A coordinated set of experiments has been designed to assess both a standard and an enhanced horizontal resolution simulation in the atmosphere and ocean. The set of HighResMIP experiments is divided into three tiers consisting of atmosphere-only and coupled runs and spanning the period 1950-2050, with the possibility to extend to 2100, together with some additional targeted experiments. This paper describes the experimental set-up of HighResMIP, the analysis plan, the connection with the other CMIP6 endorsed MIPs, as well as the DECK and CMIP6 historical simulation. HighResMIP thereby focuses on one of the CMIP6 broad questions: “what are the origins and consequences of systematic model biases?”, but we also discuss how it addresses the World Climate Research Program (WCRP) grand challenges.

Sign in / Sign up

Export Citation Format

Share Document