scholarly journals Modeling analysis and lightweight design for an axle hub considering stress and fatigue life

2020 ◽  
Vol 103 (3) ◽  
pp. 003685042092993
Author(s):  
Cuixia Zhang ◽  
Quande Dong ◽  
Liangxi Zhang ◽  
Qiang Li ◽  
Jianqing Chen ◽  
...  
Keyword(s):  
Design Method ◽  
Structural Parameters ◽  
Lightweight Design ◽  
Point Of View ◽  
Production Costs ◽  
Practical Significance ◽  
Modeling Analysis ◽  
Design Cycle ◽  
Stress And Deformation ◽  
Hub Model

The lightweight of axle hub has been recognized as a typical representative of reducing the quality of vehicles for energy saving and emission reduction. Therefore, a modeling analysis and lightweight design based on ANSYS for axle hub is proposed. Firstly, design dimensions and structural parameters of axle hub are modeled. The hub model is imported into workbench software to simulate the static analysis. The stress and deformation of the axle hub are obtained by mesh element division, boundary condition constraints and loading conditions, and the modal and fatigue strength of the hub are simulated to obtain the modal natural frequency and life data. Then, from the point of view of reducing the quality and safety of the hub, the structure of the hub is changed, the model is compared again, and the lightweight design scheme can be obtained. The results show that the weight of a hub decreases by 5.537% after lightening. This method can improve the structure, save materials, reduce production costs, and shorten the design cycle. This lightweight design method has important reference and practical significance for the lightweight design of axle wheels and similar products.

scholarly journals Stamp-Charged Coke-Making Technology—The Effect of Charge Density and the Addition of Semi-Soft Coals on the Structural, Textural and Quality Parameters of Coke

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3401
Author(s):  
Michał Rejdak ◽  
Andrzej Strugała ◽  
Aleksander Sobolewski
Keyword(s):  
Coke Quality ◽  
Structural Parameters ◽  
World Market ◽  
Coke Production ◽  
Quality Parameters ◽  
Point Of View ◽  
Production Costs ◽  
Blast Furnace Charge ◽  
Large Fluctuations ◽  
The Cost

Coke is an integral component of the blast furnace charge; therefore, it plays an important role in the integrated steelmaking process. Achieving the required coke quality parameters by producers requires the use of a high proportion of the highest quality coking coals (hard coking coals) in the coking blends, which significantly increases the unit production costs. Approximately 75% of these costs are constituted by the cost of the coal blend’s preparation. There is a deficit in the best quality coking coals on the world market and their supply are characterized by large fluctuations in quality parameters. Therefore, from the point of view of the economics of coke production, it is advantageous to produce high-quality coke from a coke blend with the highest possible content of cheaper coals. The paper presents the results of the influence of coal charge bulk density and semi-soft coking coal content in the coking blend on the textural and structural parameters of coke, which determine its quality. Research has shown that the application of increased density influences the parameters of the texture and structure of the coke, which shape its quality parameters. The use of stamp-charging technology contributes to the improvement of the coke quality or enables the production of coke of a predetermined quality from blends containing cheaper semi-soft coals.

Lightweight Study on Gear Reducer Box Structure Based on Finite Element Analysis

2013 ◽  
Vol 823 ◽  
pp. 20-23 ◽  
Author(s):  
Yi Bin He ◽  
Bing Kuan Yang ◽  
Yu Zhang ◽  
Shi Wen Liu ◽  
Ding Fang Chen
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Lightweight Design ◽  
Plate Thickness ◽  
Comprehensive Analysis ◽  
Practical Significance ◽  
Bottom Plate ◽  
Element Analysis ◽  
Box Structure ◽  
Stress And Deformation

On the basis of the analysis of the problems existing in the current research on gear reducer structure, using Solidworks to reducer box structure finite element analysis, by changing the angle of the rib plate and rib plate thickness, the size of the box thickness and the thickness of the bottom plate, based on a comparative study on the experimental data, the comprehensive analysis of the change of the stress and displacement, enclosure structure stress and deformation with the change of size of box body, and eventually make the reducer box to achieve optimization of the structure, lightweight design for the reducer box to explore effective ways and means, has a certain practical significance. Keywords: Solidworks;Finite Element Analysis;Gear Reducer Box;Lightweight;

Specimen Preparation for Clinical Applications of X-Ray Microanalysis

1990 ◽  
Vol 48 (2) ◽  
pp. 328-329
Author(s):  
J.D. Shelburne ◽  
G.M. Roomans
Keyword(s):  
Carbon Coating ◽  
Clinical Applications ◽  
Point Of View ◽  
Practical Significance ◽  
Sweat Test ◽  
Specimen Preparation ◽  
Tissue Preparation ◽  
X Ray ◽  
Gallbladder Stones ◽  
Clinical Problems

Proper preparative procedures are a prerequisite for the validity of the results of x-ray microanalysis of biological tissue. Clinical applications of x-ray microanalysis are often concerned with diagnostic problems and the results may have profound practical significance for the patient. From this point of view it is especially important that specimen preparation for clinical applications is carried out correctly.Some clinical problems require very little tissue preparation. Hair, nails, and kidney and gallbladder stones may be examined and analyzed after carbon coating. High levels of zinc or copper in hair may be indicative of dermatological or systemic diseases. Nail clippings may be analyzed (as an alternative to the more conventional sweat test) to confirm a diagnosis of cystic fibrosis. X-ray microanalysis in combination with scanning electron microscopy has been shown to be the most reliable method for the identification of the components of kidney or gallbladder stones.A quantitatively very important clinical application of x-ray microanalysis is the identification and quantification of asbestos and other exogenous particles in lung.

scholarly journals Erosion Transportation Processes as Influenced by Gully Land Consolidation Projects in Highly Managed Small Watersheds in the Loess Hilly–Gully Region, China

Water ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1540
Author(s):  
Qianqian Ji ◽  
Zhe Gao ◽  
Xingyao Li ◽  
Jian’en Gao ◽  
Gen’guang Zhang ◽  
...  
Keyword(s):  
Similarity Theory ◽  
Design Method ◽  
Simulation Method ◽  
Practical Significance ◽  
Land Consolidation ◽  
Small Watershed ◽  
Flood Peak ◽  
Erosion Area ◽  
The Impact ◽  
Erosion Environment

The Loess Hilly–Gully region (LHGR) is the most serious soil erosion area in the world. For the small watershed with high management in this area, the scientific problem that has been paid attention to in recent years is the impact of the land consolidation project on the erosion environment in the gully region. In this study, the 3D simulation method of vegetation, eroded sediment and pollutant transport was innovated based on the principles of erosion sediment dynamics and similarity theory, and the impacts of GLCP were analyzed on the erosion environment at different scales. The verification results show that the design method and the scale conversion relationship (geometric scale: λl = 100) were reasonable and could simulate the transport process on the complex underlying surface of a small watershed. Compared with untreated watersheds, a significant change was the current flood peak lagging behind the sediment peak. There were two important critical values of GLCP impact on the erosion environment. The erosion transport in HMSW had no change when the proportion was less than 0.85%, and increased obviously when it was greater than 3.3%. The above results have important theoretical and practical significance for watershed simulation and land-use management in HMSW.

scholarly journals Cycle-oriented approach to building a model of production costs

2020 ◽  
Vol 17 ◽  
pp. 00124
Author(s):  
Elena P. Polikarpova ◽  
Igor E. Mizikovskiy
Keyword(s):  
Cost Management ◽  
Modern Science ◽  
Management Control ◽  
Point Of View ◽  
Production Costs ◽  
Production Cycle ◽  
Agricultural Activity ◽  
Management Tools ◽  
Agricultural Enterprises ◽  
Oriented Approach

Modern science and practice does not have a sufficient set of cost management tools, taking into account the duration of the production cycle, characteristic of agricultural activity. The implementation of a cycle-oriented approach to building a model of production costs was based on studying the existing options for classifying production costs, which were supplemented with features from the perspective of managing long production cycles. As a result of the study, a model of production costs was built from the point of view of a cycle-oriented approach, as well as a model of production costs from the standpoint of features of a long production cycle. The model can serve as the basis for the formation of the information space of cost management, control and cost analysis in the economy of agricultural enterprises.

scholarly journals Suboptimal Disturbance Observer Design Using All Stabilizing Q Filter for Precise Tracking Control

Mathematics ◽  
2020 ◽  
Vol 8 (9) ◽  
pp. 1434 ◽  
Author(s):  
Wonhee Kim ◽  
Sangmin Suh
Keyword(s):  
Design Method ◽  
Industrial Applications ◽  
Point Of View ◽  
Observer Design ◽  
Linear Matrix ◽  
External Disturbances ◽  
Closed Loop Systems ◽  
Control Target ◽  
The Stability ◽  
Unified Index

For several decades, disturbance observers (DOs) have been widely utilized to enhance tracking performance by reducing external disturbances in different industrial applications. However, although a DO is a verified control structure, a conventional DO does not guarantee stability. This paper proposes a stability-guaranteed design method, while maintaining the DO structure. The proposed design method uses a linear matrix inequality (LMI)-based H∞ control because the LMI-based control guarantees the stability of closed loop systems. However, applying the DO design to the LMI framework is not trivial because there are two control targets, whereas the standard LMI stabilizes a single control target. In this study, the problem is first resolved by building a single fictitious model because the two models are serial and can be considered as a single model from the Q-filter point of view. Using the proposed design framework, all-stabilizing Q filters are calculated. In addition, for the stability and robustness of the DO, two metrics are proposed to quantify the stability and robustness and combined into a single unified index to satisfy both metrics. Based on an application example, it is verified that the proposed method is effective, with a performance improvement of 10.8%.

scholarly journals Crystallographic and structural characterization of heterometallic platinum compounds Part VII. Heterohepta- and heterooctanuclear clusters

2014 ◽  
Vol 13 (1) ◽  
Author(s):  
Milan Melnik ◽  
Peter Mikuš ◽  
Clive E. Holloway
Keyword(s):  
Structural Characterization ◽  
Structural Parameters ◽  
Bond Distance ◽  
Point Of View ◽  
Platinum Compounds ◽  
Metal Atoms ◽  
Platinum Clusters ◽  
Structural Point

AbstractThis review classifies and analyzes over fifty heterohepta- and heterooctanuclear platinum clusters. There are eight types of metal combinations in heteroheptanuclear: Pt6M, Pt5M2, Pt4M3, Pt3M4, Pt2M5, PtM6, Pt3Hg2Ru2 and Pt2Os3Fe2. The seven metal atoms are in a wide variety of arrangements, with the most common being one in which the central M atom (mostly M(I)) is sandwiched by two M3 triangles. Another arrangement often found is an octahedron of M6 atoms asymmetrically capped by an M atom. The shortest Pt-M bond distances (non-transition and transition) are 2.326(1) Å (M = Ga) and 2.537(6) Å (M = Fe). The shortest Pt-Pt bond distance is 2.576(2) Å.In heterooctanuclear platinum clusters there are eight types of metal combinations: Pt6M2, Pt4M4, Pt3Ru5, Pt2M6, PtM7, Pt2W4Ni2, PtAu6Hg and PtAu5Hg2. From a structural point of view, the clusters are complex with bicapped octahedrons of eight metal atoms prevailing. The shortest Pt-M bond distances (non-transition and transition) are 2.651(3) Å (M = Hg) and 2.624(1) Å (M = Os). The shortest Pt-Pt bond distance is 2.622(1) Å. These values are somewhat longer than those in the heteroheptanuclear clusters. Several relationships between the structural parameters were found, and are discussed and compared with the smaller heterometallic platinum clusters

Structural Analysis and Optimization Design of Motor Hanging Seat Structural Based on Pro/ENGINEER

2013 ◽  
Vol 380-384 ◽  
pp. 39-42
Author(s):  
Shun Xi Gao ◽  
Shu Guo Zhao ◽  
Li Fang Zhao
Keyword(s):  
Structural Analysis ◽  
Objective Function ◽  
Economic Efficiency ◽  
Mass Production ◽  
Optimization Design ◽  
Raw Materials ◽  
Parametric Model ◽  
Production Costs ◽  
Practical Significance ◽  
Displacement Constraints

This paper establishes a parametric model on the motor hanging seat structure by pro / ENGINEER software, and then optimizes the structure of the hanging seat by the weight of the hanging seat as the objective function. Taking into account the stress and displacement constraints in the optimization process, the weight of the hanging seat is greatly reduced after being optimized. It is practical significance to save a large amount of raw materials for the mass production and to reduce production costs and create higher economic efficiency.

scholarly journals Novel Robust Design Method of Multilayer Optical Coatings

ISRN Optics ◽  
2012 ◽  
Vol 2012 ◽  
pp. 1-6 ◽  
Author(s):  
Suyong Wu ◽  
Xingwu Long ◽  
Kaiyong Yang
Keyword(s):  
Robust Design ◽  
Optimization Design ◽  
Design Method ◽  
Analytical Calculation ◽  
Design Procedure ◽  
Deposition Process ◽  
Practical Significance ◽  
Optical Coatings ◽  
Optical Films ◽  
Robust Design Method

We present a novel fast robust design method of multilayer optical coatings. The sensitivity of optical films to production errors is controlled in the whole optimization design procedure. We derive an analytical calculation model for fast robust design of multilayer optical coatings. We demonstrate its effectiveness by successful application of the robust design method to a neutral beam splitter. It is showed that the novel robust design method owns an inherent fast computation characteristic and the designed film is insensitive to the monitoring thickness errors in deposition process. This method is especially of practical significance to improve the mass production yields and repetitive production of high-quality optical coatings.

Famous teachers and educators of the first half of the XX century about the problems of the North Caucasian muslim education.

2021 ◽  
Vol 13 (2) ◽  
pp. 208-222
Author(s):  
Nadezhda O. Bleich ◽  
Keyword(s):  
Educational Process ◽  
Point Of View ◽  
Practical Significance ◽  
Past Century ◽  
North Caucasus ◽  
Caucasus Region ◽  
The Past ◽  
The North ◽  
New Type ◽  
Historical Heritage

The article is devoted to the consideration of the worldview positions of famous educators of the past century regarding the state of school education among Muslims of the North Caucasus region. It is proved that the enlighteners advocated the creation of a new type of national non-class school and the construction of the didactic foundations of the educational process in it. The novelty of the work is that, based on the analysis of the views of the advanced intelligentsia of the region, aimed at understanding the current socio-cultural situation, an attempt was made to scientifically understand the problems and prospects for the development of the Muslim educational system of the past from the point of view of the modern scientific paradigm. The practical significance of the publication lies in expanding the understanding of the system of Mohammedan education in the context of its historical heritage, which will help to comprehend modern problems associated with the reform of general and vocational education in the national Muslim republics.

Sign in / Sign up

Export Citation Format

Share Document