scholarly journals Research on cutting performance and fatigue life of conical pick in cutting rock process

2021 ◽  
Vol 104 (4) ◽  
pp. 003685042110502
Author(s):  
Qingliang Zeng ◽  
Zhiwen Wang ◽  
Zhenguo Lu ◽  
Lirong Wan ◽  
Zhihai Liu ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Cutting Force ◽  
Cutting Speed ◽  
Simulation Models ◽  
Cutting Parameters ◽  
Rock Damage ◽  
Specific Cutting Energy ◽  
Conical Pick ◽  
Research Results ◽  
Cutting Energy

The conical pick is the most crucial tool of roadheader for breaking rock, establishing the conical pick cutting rock and conical pick fatigue life numerical simulation models to investigate the influence of cutting parameters on rock damage, average peak cutting force, specific cutting energy and the conical pick fatigue life. The research results indicate that the width and depth of rock damage increase with increasing cutting depth and cutting speed. The average peak cutting force and the specific cutting energy have the same changing tendency. The changing trend of conical pick fatigue life and conical pick stress is opposite relationship. The optimum cutting angle of the conical pick cutting rock is 45°. Applying the research results for guiding the optimization of the cutting parameters reduces the specific cutting energy and stress and improves the conical pick fatigue life.

Optimization of Cutting Parameters Based on Specific Cutting Energy Consumption for Aluminum 6010 by Using the Analysis of Variance (ANOVA)

2016 ◽  
Vol 842 ◽  
pp. 14-18
Author(s):  
Sri Raharno ◽  
Yatna Yuwana Martawirya ◽  
Heng Rath Visith ◽  
Jeffry Aditya Cipta Wijaya
Keyword(s):  
Energy Consumption ◽  
Analysis Of Variance ◽  
Minimum Energy ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Manufacturing Industries ◽  
Depth Of Cut ◽  
Specific Cutting Energy ◽  
Cutting Energy ◽  
Minimum Energy Consumption

Manufacturing industries have consumed 30% of the total world energy. The main energy source used in those manufacturing industries is the electricity generated from fossil fuels such as oil, gas, and coal as a result in causing the environmental and economic issues. This paper presents an experimental study in order to get the minimum energy consumption during turning of aluminum 6010 with the conventional machine tool under dry cutting condition by optimizing the cutting parameters to contribute to those issues. An analysis of variance (ANOVA) was employed to analyze the effects and contribution of depth of cut, feed, and cutting speed on the response variable, specific cutting energy. The result of this experiment showed that the feed was the most significant factor for minimizing energy consumption followed by the cutting speed and the depth of cut. The minimum energy consumption was obtained when the highest level of cutting parameters have been used.

scholarly journals Experimental Investigation on Dry Routing of CFRP Composite: Temperature, Forces, Tool Wear, and Fine Dust Emission

Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5697
Author(s):  
Tarek Elgnemi ◽  
Victor Songmene ◽  
Jules Kouam ◽  
Martin B.G. Jun ◽  
Agnes Marie Samuel
Keyword(s):  
Tool Wear ◽  
Cutting Force ◽  
Dust Emission ◽  
Cutting Temperature ◽  
Cutting Speed ◽  
Machining Process ◽  
Specific Cutting Energy ◽  
Fine Dust ◽  
Cutting Energy ◽  
Cutting Speeds

This article presents the influence of machining conditions on typical process performance indicators, namely cutting force, specific cutting energy, cutting temperature, tool wear, and fine dust emission during dry milling of CFRPs. The main goal is to determine the machining process window for obtaining quality parts with acceptable tool performance and limited dust emission. For achieving this, the cutting temperature was examined using analytical and empirical models, and systematic cutting experiments were conducted to assess the reliability of the theoretical predictions. A full factorial design was used for the experimental design. The experiments were conducted on a CNC milling machine with cutting speeds of 10,000, 15,000, and 20,000 rpm and feed rates of 2, 4, and 6 µm/tooth. Based on the results, it was ascertained that spindle speed significantly affects the cutting temperature and fine particle emission while cutting force, specific cutting energy, and tool wear are influenced by the feed rate. The optimal conditions for cutting force and tool wear were observed at a cutting speed of 10,000 rpm. The cutting temperature did not exceed the glass transition temperature for the cutting speeds tested and feed rates used. The fine particles emitted ranged from 0.5 to 10 µm aerodynamic diameters with a maximum concentration of 2776.6 particles for those of 0.5 µm diameters. Finally, results of the experimental optimization are presented, and the model is validated. The results obtained may be used to better understand specific phenomena associated with the milling of CFRPs and provide the means to select effective milling parameters to improve the technology and economics of the process.

scholarly journals Numerical Investigation of the Rock Cutting Performance of a Circular Sawblade

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Zhiwen Wang ◽  
Qingliang Zeng ◽  
Zhenguo Lu ◽  
Zhihai Liu ◽  
Xu Li
Keyword(s):  
Cutting Force ◽  
Great Influence ◽  
Cutting Parameters ◽  
Simulation Method ◽  
Rock Cutting ◽  
Rock Breaking ◽  
Feed Speed ◽  
Specific Cutting Energy ◽  
Cutting Depth ◽  
Cutting Energy

The rock cutting process with a circular sawblade and the rock breaking mechanism of rock are studied with a numerical simulation method in this paper. The influence of cutting parameters of the circular sawblade on cutting force, rock damage, and specific cutting energy in the process of circular sawblade cutting rock is researched. The cutting force increases with the feed speed and an increase in cutting depth and decline in rotation speed. Cutting rock with double circular sawblades can reduce cutting force. However, the specific cutting energy declines with the increase in cutting depth and the decline in the distance between the double circular sawblades. Cutting parameters have a great influence on the damage range of rock. The research results can be applied to rock processing with a circular sawblade.

scholarly journals Study of the behavior of sugarcane bagasse submitted to cutting

DYNA ◽  
2015 ◽  
Vol 82 (191) ◽  
pp. 171-175 ◽  
Author(s):  
Nelson Arzola ◽  
Joyner García
Keyword(s):  
Statistical Analysis ◽  
Moisture Content ◽  
Cutting Force ◽  
Sugarcane Bagasse ◽  
Cutting Speed ◽  
Response Surfaces ◽  
Specific Cutting Energy ◽  
Cutting Energy ◽  
Blade Edge ◽  
Pre Treatment

The aim of this work was to study the behavior of sugarcane bagasse submitted to cutting, as a function of its moisture content, angle of the blade edge and cutting speed. The specific cutting energy and peak cutting force were measured using an experimental facility developed for this series of experiments. An analysis of the results of the full factorial experimental design using a statistical analysis of variance (ANOVA) was performed. The response surfaces and empirical models for the specific cutting energy and peak cutting force were obtained using statistical analysis system software. Low angle of the blade edge and low moisture content are, in this order, the most important experimental factors in determining a low specific cutting energy and a low peak cutting force respectively. The best cutting conditions are achieved for an angle of blade edge of 20.8° and a moisture content of 10% w. b. The results of this work could contribute to the optimal design of sugarcane bagasse pre-treatment systems.

An Experimental Study of Cutting Force on Large Cutting Depth Turning Titanium Alloy with CBN Tool

2014 ◽  
Vol 800-801 ◽  
pp. 237-240
Author(s):  
Li Fu Xu ◽  
Ze Liang Wang ◽  
Shu Tao Huang ◽  
Bao Lin Dai
Keyword(s):  
Experimental Study ◽  
Titanium Alloy ◽  
Cutting Force ◽  
Feed Rate ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Cutting Depth ◽  
Cbn Tool ◽  
Cutting Experiment ◽  
Rough Turning

In this paper, the cutting experiment was used to study the influence of various cutting parameters on cutting force when rough turning titanium alloy (TC4) with the whole CBN tool. The results indicate that among the cutting speed, feed rate and cutting depth, the influence of the cutting depth is the most significant on cutting force; the next is the feed rate and the cutting speed is at least.

scholarly journals Numerical Simulation of Rock Plate Cutting with Three Sides Fixed and One Side Free

2018 ◽  
Vol 2018 ◽  
pp. 1-21 ◽  
Author(s):  
Zhenguo Lu ◽  
Lirong Wan ◽  
Qingliang Zeng ◽  
Xin Zhang ◽  
Kuidong Gao
Keyword(s):  
Numerical Simulation ◽  
Cutting Force ◽  
Cutting Speed ◽  
Rock Cutting ◽  
Numerical Results ◽  
Peak Force ◽  
Cutting Performance ◽  
Conical Pick ◽  
Cutting Method ◽  
Cutting Angle

In order to overcome conical pick wear in the traditional rock cutting method, a new cutting method was proposed on account of increasing free surface of the rock. The mechanical model of rock plate bending under concentrated force was established, and the first fracture position was given. The comparison between experimental and numerical results indicated that the numerical method is effective. A computer code LS-DYNA (3D) was employed to study the cutting performance of a conical pick. To study the rock size influenced on the cutting performance, the numerical simulations with different thickness, width, and height of a rock plate was carried out. The numerical simulation with the different cutting parameters of cutting speed, cutting angle, and cutting position influenced on cutting performance was also carried out. The numerical results indicated that the peak force increased with the increasing thickness of rock plate. With the increasing width and height of the rock plate, the peak force decreased and then became stable. Besides, the peak force decreased with the increasing of cutting position lxp/lx. Moreover, the peak force increased and then decreased with the increasing of cutting angle. The cutting speed has nonsignificant influence on the peak force. The strong exponential relationship was obtained between the peak force and cutting position, thickness, height, and width of the rock plate at a confidence level of 0.95. A binomial relationship was observed between the peak force and cutting angel. The cutting force comparison between traditional rock cutting and rock plate cutting indicated that the new cutting method can effectively reduce peak cutting force.

Comparison of Rotary and Linear Cutting Methodology in Determining Specific Cutting Energy of Granite

2021 ◽  
pp. 1-19
Author(s):  
Aamer Kazi ◽  
Yi-Tang Kao ◽  
Bruce Tai
Keyword(s):  
Linear Method ◽  
Cutting Speed ◽  
Polycrystalline Diamond ◽  
Specific Cutting Energy ◽  
Cnc Machine ◽  
Cutting Method ◽  
Cutting Energy ◽  
The Difference ◽  
Geothermal Drilling ◽  
Chip Load

Abstract Single polycrystalline diamond compact (PDC) cutting is a practical technique to understand the rock-tool interactions in drag-bit type geothermal drilling operations. This paper introduces a rotary cutting method to determine specific cutting energy (SCE) and compares it with the conventional linear cutting method. In this work, granite is selected to represent hard rock formations in geothermal drilling. Cutting tests are conducted on a CNC machine with a realistic cutting speed of 12.7 m/min and several chip loads ranging from 0.08 to 0.25 mm. The cutting force is measured using a dynamometer, and then converted to SCE. The results show that the rotary method produces an inverse relationship between SCE and chip load, whereas the linear method shows the opposite. As a result, the produced SCE by the rotary method tends to be lower than that of the linear method at a higher chip load at and over 0.16 mm. The difference may be attributed to the cutting configuration and associated force components.

Statistical Study and Multi-Response Optimization of Cutting Parameters for Dry Turning Stainless Steel AISI 316L Using Cermet Tool

2020 ◽  
Vol 36 ◽  
pp. 28-46
Author(s):  
Youssef Touggui ◽  
Salim Belhadi ◽  
Salah Eddine Mechraoui ◽  
Mohamed Athmane Yallese ◽  
Mustapha Temmar
Keyword(s):  
Surface Roughness ◽  
Cutting Force ◽  
Feed Rate ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Depth Of Cut ◽  
Aisi 316L ◽  
Cutting Power ◽  
Dry Turning ◽  
Optimization Of Cutting Parameters

Stainless steels have gained much attention to be an alternative solution for many manufacturing industries due to their high mechanical properties and corrosion resistance. However, owing to their high ductility, their low thermal conductivity and high tendency to work hardening, these materials are classed as materials difficult to machine. Therefore, the main aim of the study was to examine the effect of cutting parameters such as cutting speed, feed rate and depth of cut on the response parameters including surface roughness (Ra), tangential cutting force (Fz) and cutting power (Pc) during dry turning of AISI 316L using TiCN-TiN PVD cermet tool. As a methodology, the Taguchi L27 orthogonal array parameter design and response surface methodology (RSM)) have been used. Statistical analysis revealed feed rate affected for surface roughness (79.61%) and depth of cut impacted for tangential cutting force and cutting power (62.12% and 35.68%), respectively. According to optimization analysis based on desirability function (DF), cutting speed of 212.837 m/min, 0.08 mm/rev feed rate and 0.1 mm depth of cut were determined to acquire high machined part quality

Ultrasonic Cutting of Switchgrass and Miscanthus Stems

2018 ◽  
Vol 34 (2) ◽  
pp. 343-353
Author(s):  
A. Bulent Koc Koc ◽  
Bo Liu
Keyword(s):  
Cutting Force ◽  
Cutting Forces ◽  
High Frequency ◽  
Cutting Speed ◽  
Particle Size Reduction ◽  
Element Analysis ◽  
Cutting Energy ◽  
High Frequency Vibrations ◽  
Ultrasound Assisted ◽  
Ultrasonic Cutting

Abstract. Ultrasound-assisted cutting has been used to cut materials with high precision, improved quality and reduced cutting forces. The research objective was to investigate the effects of high-frequency vibrations on the cutting force and cutting energy of switchgrass and miscanthus stems. Laboratory experiments were conducted on individual biomass stems at cutting speeds between 3 and 400 mm/s. An experimental cutting system with an ultrasound generator, an ultrasonic blade, a load cell, and a data acquisition system was developed. The custom designed blade was 5-cm wide and vibrated at 19.551 kHz with 2.8 µm tip vibration amplitude. There were significant measured differences in the cutting forces and cutting energies between conventional cutting and ultrasonic cutting of switchgrass and miscanthus stems (p < 0.05). These results suggest that the use of high-frequency vibrations reduce cutting force and cutting energy of both switchgrass and miscanthus stems. Ultrasound-assisted cutting reduced the cutting energy of switchgrass by 66.85% at 100 mm/s and miscanthus by 80.58% at 30 mm/s. However, ultrasonic cutting did not have a significant effect on the cutting force and cutting energy when the cutting speed was equal to or greater than the blade tip vibration speed. The results of this research should be useful for adapting the ultrasonic technology in biomass harvesting, particle size reduction, and processing equipment. Keywords: Biomass, Blades, Energy, Finite element analysis, Miscanthus, Switchgrass, Ultrasonics.

Cutting Force Empirical Model of High-Speed Precision Hard Cutting GCr15

2009 ◽  
Vol 69-70 ◽  
pp. 301-305
Author(s):  
Jing Shu Hu ◽  
Yuan Sheng Zhai ◽  
Fu Gang Yan ◽  
Yu Fu Li ◽  
Xian Li Liu
Keyword(s):  
Cutting Force ◽  
Empirical Model ◽  
High Speed ◽  
Orthogonal Design ◽  
Cutting Speed ◽  
Least Square Method ◽  
Cutting Parameters ◽  
Least Square ◽  
Physical Parameters ◽  
Hard Cutting

In the cutting process, cutting force is one of the important physical parameters, which affects the generation of cutting heat, tool life and surface precision of workpiece directly. In this paper an orthogonal design of experiment and subsequent data is analyzed using high speed finish hard cutting GCr15 whose hardness is 65HRC. Cutting speed is 200-400m/min, to study the influence of cutting parameters on cutting force, cutting force empirical model has obtained from least square method.

Sign in / Sign up

Export Citation Format

Share Document