Dynamics of Change in Research Work: Constructing a New Research Area in a Research Group

2001 ◽  
Vol 26 (3) ◽  
pp. 300-321 ◽  
Author(s):  
Eveliina Saari ◽  
Reijo Miettinen
Keyword(s):  
Research Group ◽  
Research Work ◽  
Research Area ◽  
New Research

Piezoelectric β-polymorph formation of new textiles by surface modification with coating process based on interfacial interaction on the conformational variation of poly (vinylidene fluoride) (PVDF) chains

2020 ◽  
Vol 91 (3) ◽  
pp. 31301
Author(s):  
Nabil Chakhchaoui ◽  
Rida Farhan ◽  
Meriem Boutaldat ◽  
Marwane Rouway ◽  
Adil Eddiai ◽  
...  
Keyword(s):  
High Efficiency ◽  
Vinylidene Fluoride ◽  
Research Work ◽  
Research Area ◽  
Interfacial Interaction ◽  
Tetraethyl Orthosilicate ◽  
Poly Vinylidene Fluoride ◽  
Carbon Nanofillers ◽  
The Impact ◽  
Advanced Applications

Novel textiles have received a lot of attention from researchers in the last decade due to some of their unique features. The introduction of intelligent materials into textile structures offers an opportunity to develop multifunctional textiles, such as sensing, reacting, conducting electricity and performing energy conversion operations. In this research work nanocomposite-based highly piezoelectric and electroactive β-phase new textile has been developed using the pad-dry-cure method. The deposition of poly (vinylidene fluoride) (PVDF) − carbon nanofillers (CNF) − tetraethyl orthosilicate (TEOS), Si(OCH2CH3)4 was acquired on a treated textile substrate using coating technique followed by evaporation to transform the passive (non-functional) textile into a dynamic textile with an enhanced piezoelectric β-phase. The aim of the study is the investigation of the impact the coating of textile via piezoelectric nanocomposites based PVDF-CNF (by optimizing piezoelectric crystalline phase). The chemical composition of CT/PVDF-CNC-TEOS textile was detected by qualitative elemental analysis (SEM/EDX). The added of 0.5% of CNF during the process provides material textiles with a piezoelectric β-phase of up to 50% has been measured by FTIR experiments. These results indicated that CNF has high efficiency in transforming the phase α introduced in the unloaded PVDF, to the β-phase in the case of nanocomposites. Consequently, this fabricated new textile exhibits glorious piezoelectric β-phase even with relatively low coating content of PVDF-CNF-TEOS. The study demonstrates that the pad-dry-cure method can potentially be used for the development of piezoelectric nanocomposite-coated wearable new textiles for sensors and energy harvesting applications. We believe that our study may inspire the research area for future advanced applications.

scholarly journals A Bibliometric Analysis of the Global Trend of Using Alginate, Gelatine, and Hydroxyapatite for Bone Tissue Regeneration Applications

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 647
Author(s):  
Mohamed Saiful Firdaus Hussin ◽  
Aludin Mohd Serah ◽  
Khairul Azri Azlan ◽  
Hasan Zuhudi Abdullah ◽  
Maizlinda Izwana Idris ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Bibliometric Analysis ◽  
Research Work ◽  
The United States ◽  
Research Area ◽  
Bone Tissue Regeneration ◽  
Future Research ◽  
Starting Point

Collecting information from previous investigations and expressing it in a scientometrics study can be a priceless guide to getting a complete overview of a specific research area. The aim of this study is to explore the interrelated connection between alginate, gelatine, and hydroxyapatite within the scope of bone tissue and scaffold. A review of traditional literature with data mining procedures using bibliometric analyses was considered to identify the evolution of the selected research area between 2009 and 2019. Bibliometric methods and knowledge visualization technologies were implemented to investigate diverse publications based on the following indicators: year of publication, document type, language, country, institution, author, journal, keyword, and number of citations. An analysis using a bibliometric study found that 7446 papers were located with the keywords “bone tissue” and “scaffold”, and 1767 (alginate), 185 (gelatine), 5658 (hydroxyapatite) papers with those specific sub keywords. The number of publications that relate to “tissue engineering” and bone more than doubled between 2009 (1352) and 2019 (2839). China, the United States and India are the most productive countries, while Sichuan University and the Chinese Academy of Science from China are the most important institutions related to bone tissue scaffold. Materials Science and Engineering C is the most productive journal, followed by the Journal of Biomedical Materials Research Part A. This paper is a starting point, providing the first bibliometric analysis study of bone tissue and scaffold considering alginate, gelatine and hydroxyapatite. A bibliometric analysis would greatly assist in giving a scientific insight to support desired future research work, not only associated with bone tissue engineering applications. It is expected that the analysis of alginate, gelatine and hydroxyapatite in terms of 3D bioprinting, clinical outcomes, scaffold architecture, and the regenerative medicine approach will enhance the research into bone tissue engineering in the near future. Continued studies into these research fields are highly recommended.

Music Neurotechnology for Sound Synthesis: Sound Synthesis with Spiking Neuronal Networks

Leonardo ◽  
2009 ◽  
Vol 42 (5) ◽  
pp. 439-442 ◽  
Author(s):  
Eduardo R. Miranda ◽  
John Matthias
Keyword(s):  
Cortical Neurons ◽  
Neuronal Networks ◽  
Research Area ◽  
Sound Synthesis ◽  
Ongoing Research ◽  
Computer Interfaces ◽  
Engineering Sciences ◽  
New Research ◽  
Sound Files

Music neurotechnology is a new research area emerging at the crossroads of neurobiology, engineering sciences and music. Examples of ongoing research into this new area include the development of brain-computer interfaces to control music systems and systems for automatic classification of sounds informed by the neurobiology of the human auditory apparatus. The authors introduce neurogranular sampling, a new sound synthesis technique based on spiking neuronal networks (SNN). They have implemented a neurogranular sampler using the SNN model developed by Izhikevich, which reproduces the spiking and bursting behavior of known types of cortical neurons. The neurogranular sampler works by taking short segments (or sound grains) from sound files and triggering them when any of the neurons fire.

Application of eco-friendly natural dye obtained from Spathodea campanulata on silk using combination of mordants

2016 ◽  
Vol 27 (1) ◽  
pp. 15-21 ◽  
Author(s):  
M Kumaresan
Keyword(s):  
Large Scale ◽  
Potassium Dichromate ◽  
Ferrous Sulphate ◽  
Research Work ◽  
Natural Dye ◽  
Alkaline Media ◽  
Silk Fabric ◽  
Content Type ◽  
Wide Range ◽  
New Research

Purpose – The purpose of this paper is to extract the eco-friendly natural dye obtained from the flower of Spathodea campanulata and apply on silk fabric using combination of mordants. The fastness properties of the flower of Spathodea campanulata dyed silk fabric have been studied using different combination (1:3, 1:1 and 3:1) of various mordants, such as myrobolan: nickel sulphate, myrobolan: aluminium sulphate, myrobolan: potassium dichromate, myrobolan: ferrous sulphate and myrobolan: stannous chloride. The wash, rub, light and perspiration fastness of the dyed samples have been evaluated. Design/methodology/approach – For dyeing there are three methods are used. They are Pre mordanting, Simultaneous mordanting and Post mordanting methods. Dyed silk materials are tested by using wash fastness, rub fastness, light and perspiration fastness methods. Findings – It is found that Spathodea campanulata dye can be successfully used for the dyeing of silk to obtain a wide range colours by using various combinations of mordants. With regards to colour fastness, test samples exhibit excellent fastness to washing, rubbing, except for pre-mordanting using myrobolan: potassium dichromate combination; and good to excellent fastness to perspiration in both acidic and alkaline media. Originality/value – Availability of literature related to this work is not available. The study of combination of mordants of this natural dye on silk is a new research work and the large scale preparation is definitely very useful to the society.

Research on Signal Timing Method of Intersection Based on RFID

2011 ◽  
Vol 84-85 ◽  
pp. 410-414
Author(s):  
Wei He ◽  
Jie Xiong
Keyword(s):  
Comparative Analysis ◽  
Radio Frequency Identification ◽  
Main Parameter ◽  
Control Method ◽  
Research Work ◽  
Signal Timing ◽  
Key Points ◽  
Frequency Identification ◽  
New Research ◽  
Radio Frequency Identification Devices

Based on the RFID (Radio Frequency Identification Devices), this paper presents new research work of signal timing intersection in the aspects of the key points of design, the main parameter and timing methods. Finally, the intersection of signal timing of fuzzy control method based on RFID is proposed through comparative analysis of the intersection of several traditional signal timing methods.

A systematic review of e-tail product returns and an agenda for future research

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Kamrul Ahsan ◽  
Shams Rahman
Keyword(s):  
Literature Review ◽  
Systematic Literature Review ◽  
Research Area ◽  
Future Research ◽  
Product Returns ◽  
Content Type ◽  
People Skills ◽  
New Research ◽  
Returns Management ◽  
The Impact

PurposeThis study conducts a systematic literature review of e-tail product returns research. E-tail product returns are essentially acquisition of products that have been sold through purely online or brick-and-click channels and then returned by consumer to business.Design/methodology/approachUsing a systematic literature review protocol, we identified 75 peer-reviewed articles on e-tail product returns, conducted bibliometric analysis and content analysis of the articles and summarised our findings.FindingsThe findings reveal that the subject of e-tail returns is a new research area; academics have started to investigate several aspects of e-tail returns through different research methodologies and theoretical foundations. Further research is required in leading e-commerce countries and on key areas such as omni-channel returns management, customer satisfaction and service, the impact of resources such as people skills, the benefits of technology and IT systems in managing e-tail returns.Practical implicationsThe study offers a summative account of current e-tail knowledge areas, which can serve as a reference guide for e-tailers to develop strategies for more efficient and competitive product returns.Originality/valueThis study contributes theoretically by developing clusters of key themes or knowledge areas about e-tail returns. It also provides a conceptual framework for e-tail returns management, which can be used as a springboard for further empirical research.

Interoperability in Cloud Manufacturing and Practice on Private Cloud Structure for SMEs

2017 ◽  
Author(s):  
Xi Vincent Wang ◽  
Lihui Wang
Keyword(s):  
Manufacturing Systems ◽  
Manufacturing System ◽  
Research Work ◽  
Cloud Manufacturing ◽  
Cloud Services ◽  
Security Requirements ◽  
Research Trend ◽  
Safety Regulations ◽  
Multiple Challenges ◽  
New Research

In recent years, Cloud manufacturing has become a new research trend in manufacturing systems leading to the next generation of production paradigm. However, the interoperability issue still requires more research due to the heterogeneous environment caused by multiple Cloud services and applications developed in different platforms and languages. Therefore, this research aims to combat the interoperability issue in Cloud Manufacturing System. During implementation, the industrial users, especially Small- and Medium-sized Enterprises (SMEs), are normally short of budget for hardware and software investment due to financial stresses, but they are facing multiple challenges required by customers at the same time including security requirements, safety regulations. Therefore in this research work, the proposed Cloud manufacturing system is specifically tailored for SMEs.

scholarly journals Photobiomodulation of Human Fibroblasts and Keratinocytes with Blue Light: Implications in Wound Healing

2020 ◽  
Author(s):  
Francesca Rossi ◽  
Giada Magni ◽  
Francesca Tatini ◽  
Martina Banchelli ◽  
Federica Cherchi ◽  
...  
Keyword(s):  
Wound Healing ◽  
Blue Light ◽  
Chronic Wounds ◽  
Human Fibroblasts ◽  
Healing Process ◽  
Research Area ◽  
Wound Management ◽  
Blue Led ◽  
Led Light ◽  
New Research

In recent years, photobiomodulation (PBM) has been recognized as a physical therapy in wound management. Despite several published research papers, the mechanism underlying photobiomodulation is still not completely understood. The investigation about application of blue light to improve wound healing is a relatively new research area. Tests in selected patients evidenced a stimulation of the healing process in superficial and chronic wounds treated with a blue LED light emitting at 420 nm; a study in animal model pointed out a faster healing process in superficial wound, with an important role of fibroblasts and myofibroblasts. Here we present a study aiming at evidencing the effects of blue light on the proliferation and metabolism in fibroblasts and keratinocytes. Different light doses were used to treat the cells, evidencing inhibitory and stimulatory effects. Electrophysiology was used to investigate the effects on membrane currents, while Raman spectroscopy revealed the mitochondrial Cytochrome C (Cyt C) oxidase dependence on blue light irradiation. In conclusion, we observed that the blue LED light can be used to modulate the activity of human fibroblasts, and the effects in wound healing are particularly evident when studying the fibroblasts and keratinocytes co-cultures.

scholarly journals MIGRATION AS A SOCIAL RESOURCE OF TERRITORIAL COMMUNITY

PRIMO ASPECTU ◽  
2020 ◽  
pp. 56-64
Author(s):  
Julia DROZDOVA
Keyword(s):  
Human Resources ◽  
Social Transformation ◽  
Local Population ◽  
Research Area ◽  
Academic Community ◽  
Social Resource ◽  
Sociological Study ◽  
Volgograd Region ◽  
New Research ◽  
Combined Strategy

In the modern globalized world migration shows a stable progressing nature which explains the academic interest in this complex, controversial phenomenon. The complexity of migration processes gives rise to new discourses, and a new research area where migration is studied as a social resource, a channel to replenish human resources in the declining regions of the Russian Federation. Data obtained in a complex sociological study performed within the framework of RFFI grant #19-411-340002 “Territorial communities in social transformation: a sociological and managerial analysis” permitted considering migration as a social resource. The research team of the Volgograd Institute of management, a branch of RANEPA, used a combined strategy that includes both quantitative (mass survey of citizens and rural residents) and qualitative methods of empirical study. The former were mass surveys of urban and country residents, the latter - in-depth interviews of experts and representatives of territorial local governing bodies, the academic community, urban and country activists, architects, leaders of property owner associations, long term residents of territorial communities. The obtained data allowed revealing the potential of migration in terms of partial compensation for the declining population of the Volgograd region, replenishing human resources and labor force, preservation and development of regional territories, building solidary ties between the local population and migrants. Migration has both positive and negative implications; the objective, inevitable nature of migration brings to the fore a need for optimal, effective methods of management at all levels of the social system. Social and ethnic agreement between migrants and the receiving population in territorial communities can be only possible when life in a region is well regulated, its municipal structures and local communities function properly, and the traditions and culture of all people residing here are respected.

scholarly journals Design Techniques for Elliptical Micro-Strip Patch Antenna and Their Effects on Antenna Performance

2019 ◽  
Vol 8 (12) ◽  
pp. 2317-2326
Keyword(s):  
Patch Antenna ◽  
Degrees Of Freedom ◽  
Wide Band ◽  
Research Area ◽  
Patch Antennas ◽  
Bandwidth Enhancement ◽  
Antenna Performance ◽  
Elliptical Ring ◽  
New Research ◽  
Design Techniques

Elliptical Micro-strip Patch Antenna (EMPA) has been emerged as a peculiar and significant category among the different shaped micro-strip patch antennas because of its circular polarization and dual-resonant frequency features with a single feed. Elliptical and its derived shapes such as semielliptical, half-elliptical, slotted-elliptical and elliptical ring are found to be particularly instrumental for bandwidth enhancement and these antennas find great applications in Ultra Wide Band (UWB) and Super Wide Band (SWB) communications. Compared to antennas with circular or rectangular shapes, the design of EMPA is a research area of high potential as there is higher flexibility in its design due to more degrees of freedom. The reported literature in the field of EMPA is very less and there is ample scope for new researchers to work on. This review paper is an attempt to summarize and critically assess the-state-of-the-art design techniques as reported in literature and understand their effects on performance of elliptical patch antenna for suggesting new research fronts in the field of EMPA.

Sign in / Sign up

Export Citation Format

Share Document