scholarly journals Influence of electrolytes and hydroxypropylsulfonation on paste stability of cassava starch/polyvinyl alcohol blend sizes for warp sizing

2020 ◽  
Vol 15 ◽  
pp. 155892501990066
Author(s):  
Wei Li ◽  
Lanjuan Wu ◽  
Zhengqiao Zhang ◽  
Yuhao Lu
Keyword(s):  
Polyvinyl Alcohol ◽  
Aqueous Medium ◽  
Sulfonic Acid ◽  
Cassava Starch ◽  
Degree Of Polymerization ◽  
Lower Degree ◽  
Weight Percentage ◽  
Separation Rate ◽  
Before And After ◽  
The Stability

The aim of this research was to ascertain the influences of electrolytes and hydroxypropylsulfonation on paste stabilities of cassava starch/polyvinyl alcohol blend sizes. The hydroxypropylsulfonated cassava starch was prepared via hydroxypropylsulfonation of hydrolyzed cassava starch with 3-chloro-2-hydroxypropyl sulfonic acid sodium in an aqueous medium. The stability was evaluated by measuring the initial demixing time. Before and after the addition of the electrolytes such as NaH2PO4, Na2SO4, and NaCl, the initial demixing time was 24, 20, 18, and 15 min for hydroxypropylsulfonated cassava starch/PVA1799 paste and 21, 17, 15, and 14 min for hydrolyzed cassava starch/PVA1799 one. This showed that the electrolytes accelerated the separation rates of hydroxypropylsulfonated cassava starch/polyvinyl alcohol blend pastes and hydrolyzed cassava starch/polyvinyl alcohol ones, thereby reducing the stability, and the acceleration followed the order: NaH2PO4 > Na2SO4 > NaCl. Increasing the concentration of electrolyte accelerated the separation rate and lowered the stability. The hydroxypropylsulfonation was able to reduce the separation rate and enhance paste stability. When the weight percentage of starch was fixed, with the rise in the degree of substitution from 0.011 to 0.029, the initial demixing time gradually increased, indicating the gradual decreases in the separation rates, thereby promoting the enhancement in the stability. Moreover, PVA0588 was lower than PVA1799 and PVA1788 in affecting the separation rate, which implied that polyvinyl alcohol with a lower degree of polymerization favored to promote the stability.

A comparison between the mode of sction of organic matter and synthetic polymers in stabilizing soil crumbs

1956 ◽  
Vol 47 (3) ◽  
pp. 350-353 ◽  
Author(s):  
W. W. Emerson
Keyword(s):  
Organic Matter ◽  
Polyvinyl Alcohol ◽  
Natural Soil ◽  
Amino Groups ◽  
Ionic Polymer ◽  
Phosphate Ions ◽  
Before And After ◽  
The Stability ◽  
Method Of Extraction ◽  
Neutral Sodium

Synthetic soil crumbs stabilized by the addition of small quantities of a polymer, and natural soil crumbs from old grassland, have been extracted with neutral sodium pyrophosphate and alkali and the strengths of the crumbs compared before and after extraction, using the sodium saturation technique. Three polymers were used: polyvinyl alcohol (a non-ionic polymer), sodium alginate, and a vinyl acetate-maleic anhydride co-polymer (Vama), the latter both carboxylated polymers. Pyrophosphate was able to displace the carboxylated polymers from the synthetic crumbs, but not the stabilizing fraction of the organic matter from the grassland crumbs. 0·5N-NaOH produced a much greater reduction on the strength of the alginate treated crumbs compared with Vama crumbs, which is attributed to the weaker hydrogen bonds formed by the former. Prolonged leaching with alkali removed a considerable part of the stabilizing organic matter in the grassland crumbs. Neither method of extraction affected the stability of the polyvinyl alcohol crumbs.It is concluded that the grassland crumbs are stabilized by the formation of inter-lamellar complexes with the clay in the crumbs, and probably that the substance forming the complexes is a polymer and contains amino-groups.Evidence is also given that phosphate ions and the carboxylated polymers are attached in the same manner to the edges of the clay crystals.

The Effect of VikaneTm on the Stability of Cellulosic and Ligneous Materials -- Measurement of Deterioration by Chemical and Physical Methods

1990 ◽  
Vol 185 ◽  
Author(s):  
Helen D. Burgess ◽  
Nancy E. Binnie
Keyword(s):  
Hydrolytic Degradation ◽  
Degree Of Polymerization ◽  
Accelerated Ageing ◽  
Total Acid ◽  
Long Term Stability ◽  
Before And After ◽  
Pulp Fibres ◽  
General Scientific ◽  
The Stability

AbstractVikaneTM (sulphuryl fluoride) is a commercial fumigant[1] which is used for the control of pests in museum collections. This paper summarizes the results obtained through an investigation of the effect of VikaneTM on twenty-five paper and textile samples. Samples chosen were representative of artifacts present in North American collections (cotton, linen, jute, and wood pulp fibres, from 1622 to present).The effect of the fumigation treatment has been evaluated by chemical and physical analyses: (1) Acidity -- surface pH, cold extracted pH, total acid (iodometric titration), (2) Oxidative and Hydrolytic Degradation - viscometric average degree of polymerization, carbonyl content (hydrazone derivatization), (3) and Fumigant Residues (specific ion electrode). Analysis of unfumigated and fumigated samples was carried out before and after accelerated ageing (70°C and 50% relative humidity) in order to estimate the long term stability of fumigated samples.The data obtained show that commercial grade VikaneTM degrades cellulosic and ligneous fibres. A second set of experiments on two fibre types using a new experimental grade of VikaneTM gave significantly less degradation. The presentation of this work will concentrate upon a general scientific interpretation of results.It is anticipated that the conclusions will be applicable to a broad range of artifacts.

The stability of dislocation networks under various oxygen-doping conditions in superconducting Bi2Sr2CaCu2Oy single crystals and their influence on the flux pinning properties

1994 ◽  
Vol 52 ◽  
pp. 802-803
Author(s):  
Y. Feng ◽  
X. Y. Cai ◽  
R. J. Kelley ◽  
D. C. Larbalestier
Keyword(s):  
Single Crystals ◽  
Oxygen Content ◽  
Basal Plane ◽  
Flux Pinning ◽  
Pinning Centers ◽  
Before And After ◽  
Anomalous Peak ◽  
Basal Plane Dislocation ◽  
The Stability ◽  
Further Development

The issue of strong flux pinning is crucial to the further development of high critical current density Bi-Sr-Ca-Cu-O (BSCCO) superconductors in conductor-like applications, yet the pinning mechanisms are still much debated. Anomalous peaks in the M-H (magnetization vs. magnetic field) loops are commonly observed in Bi2Sr2CaCu2Oy (Bi-2212) single crystals. Oxygen vacancies may be effective flux pinning centers in BSCCO, as has been found in YBCO. However, it has also been proposed that basal-plane dislocation networks also act as effective pinning centers. Yang et al. proposed that the characteristic scale of the basal-plane dislocation networksmay strongly depend on oxygen content and the anomalous peak in the M-H loop at ˜20-30K may be due tothe flux pinning of decoupled two-dimensional pancake vortices by the dislocation networks. In light of this, we have performed an insitu observation on the dislocation networks precisely at the same region before and after annealing in air, vacuumand oxygen, in order to verify whether the dislocation networks change with varying oxygen content Inall cases, we have not found any noticeable changes in dislocation structure, regardless of the drastic changes in Tc and the anomalous magnetization. Therefore, it does not appear that the anomalous peak in the M-H loops is controlled by the basal-plane dislocation networks.

Sorbitol enhances the physicochemical stability of B12 vitamers

2020 ◽  
Vol 90 (5-6) ◽  
pp. 439-447 ◽  
Author(s):  
Andrew Hadinata Lie ◽  
Maria V Chandra-Hioe ◽  
Jayashree Arcot
Keyword(s):  
Ascorbic Acid ◽  
Uv Light ◽  
Heat Exposure ◽  
Water Soluble ◽  
Uv Exposure ◽  
Physicochemical Stability ◽  
Before And After ◽  
The Stability

Abstract. The stability of B12 vitamers is affected by interaction with other water-soluble vitamins, UV light, heat, and pH. This study compared the degradation losses in cyanocobalamin, hydroxocobalamin and methylcobalamin due to the physicochemical exposure before and after the addition of sorbitol. The degradation losses of cyanocobalamin in the presence of increasing concentrations of thiamin and niacin ranged between 6%-13% and added sorbitol significantly prevented the loss of cyanocobalamin (p<0.05). Hydroxocobalamin and methylcobalamin exhibited degradation losses ranging from 24%–26% and 48%–76%, respectively; added sorbitol significantly minimised the loss to 10% and 20%, respectively (p < 0.05). Methylcobalamin was the most susceptible to degradation when co-existing with ascorbic acid, followed by hydroxocobalamin and cyanocobalamin. The presence of ascorbic acid caused the greatest degradation loss in methylcobalamin (70%-76%), which was minimised to 16% with added sorbitol (p < 0.05). Heat exposure (100 °C, 60 minutes) caused a greater loss of cyanocobalamin (38%) than UV exposure (4%). However, degradation losses in hydroxocobalamin and methylcobalamin due to UV and heat exposures were comparable (>30%). At pH 3, methylcobalamin was the most unstable showing 79% degradation loss, which was down to 12% after sorbitol was added (p < 0.05). The losses of cyanocobalamin at pH 3 and pH 9 (~15%) were prevented by adding sorbitol. Addition of sorbitol to hydroxocobalamin at pH 3 and pH 9 reduced the loss by only 6%. The results showed that cyanocobalamin was the most stable, followed by hydroxocobalamin and methylcobalamin. Added sorbitol was sufficient to significantly enhance the stability of cobalamins against degradative agents and conditions.

Evaluation of Dexmedetomidine Dosing in Obese Critically Ill Patients

2021 ◽  
pp. 089719002110215
Author(s):  
Sara A. Atyia ◽  
Keaton S. Smetana ◽  
Minh C. Tong ◽  
Molly J. Thompson ◽  
Kari M. Cape ◽  
...  
Keyword(s):  
Body Weight ◽  
Critically Ill ◽  
Critically Ill Patients ◽  
Statistical Difference ◽  
Ideal Body Weight ◽  
Weight Percentage ◽  
Before And After ◽  
Light Sedation ◽  
Icu Sedation ◽  
Dose Dependent

Background: Dexmedetomidine is a highly selective α2-adrenoreceptor agonist that produces dose-dependent sedation, anxiolysis, and analgesia without respiratory depression. Due to these ideal sedative properties, there has been increased interest in utilizing dexmedetomidine as a first-line sedative for critically ill patients requiring light sedation. Objective: To evaluate the ability to achieve goal intensive care unit (ICU) sedation before and after an institutional change of dosing from actual (ABW) to adjusted (AdjBW) body weight in obese patients on dexmedetomidine. Methods: This study included patients ≥ 18 years old, admitted to a surgical or medical ICU, required dexmedetomidine for at least 8 hours as a single continuous infusion sedative, and weighed ≥ 120% of ideal body weight. Percentage of RASS measurements within goal range (−1 to +1) during the first 48 hours after initiation of dexmedetomidine as the sole sedative agent or until discontinuation dosed on ABW compared to AdjBW was evaluated. Results: 100 patients were included in the ABW cohort and 100 in the AdjBW cohort. The median dosing weight was significantly higher in the ABW group (95.9 [78.9-119.5] vs 82.2 [72.1-89.8] kg; p = 0.001). There was no statistical difference in percent of RASS measurements in goal range (61.5% vs 69.6%, p = 0.267) in patients that received dexmedetomidine dosed based on ABW versus AdjBW. Conclusion: Dosing dexmedetomidine using AdjBW in obese critically ill patients for ongoing ICU sedation resulted in no statistical difference in the percent of RASS measurements within goal when compared to ABW dosing. Further studies are warranted.

scholarly journals Investigation of Hydrothermally Stressed Silicone Rubber/Silica Micro and Nanocomposite for the Coating High Voltage Insulation Applications

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3567
Author(s):  
Faiza Faiza ◽  
Abraiz Khattak ◽  
Safi Ullah Butt ◽  
Kashif Imran ◽  
Abasin Ulasyar ◽  
...  
Keyword(s):  
Silicone Rubber ◽  
Structural Changes ◽  
Polymer Chains ◽  
Hydrothermal Conditions ◽  
Silica Filler ◽  
Before And After ◽  
Aging Conditions ◽  
The Stability ◽  
Micro Silica ◽  
Applied Stresses

Silicone rubber is a promising insulating material that has been performing well for different insulating and dielectric applications. However, in outdoor applications, environmental stresses cause structural and surface degradations that diminish its insulating properties. This effect of degradation can be reduced with the addition of a suitable filler to the polymer chains. For the investigation of structural changes and hydrophobicity four different systems were fabricated, including neat silicone rubber, a micro composite (with 15% micro-silica filler), and nanocomposites (with 2.5% and 5% nanosilica filler) by subjecting them to various hydrothermal conditions. In general, remarkable results were obtained by the addition of fillers. However, nanocomposites showed the best resistance against the applied stresses. In comparison to neat silicone rubber, the stability of the structure and hydrophobic behavior was better for micro-silica, which was further enhanced in the case of nanocomposites. The inclusion of 5% nanosilica showed the best results before and after applying aging conditions.

Regulation of Laijiapu Waterway in Jingjiang Reach

2014 ◽  
Vol 501-504 ◽  
pp. 2001-2006
Author(s):  
Ya Liu ◽  
Li Zheng ◽  
Cheng Tao Huang ◽  
Zhao Biao Huang ◽  
Lin Liu
Keyword(s):  
Yangtze River ◽  
Three Gorges Reservoir ◽  
Three Gorges ◽  
The Yangtze River ◽  
Point Bar ◽  
The Three Gorges Reservoir ◽  
The Three Gorges ◽  
Before And After ◽  
The Stability ◽  
Channel Bar

After impoundment of the Three Gorges Reservoir, Jingjiang reach, in the middle of the Yangtze River, has gradually shown a series of atypical fluvial features, adversely affecting the maintenance of waterways. Citing the Laijiapu Waterway, a meandering segment in the lower Jingjiang for example, this paper compared the fluvial features of the channel before and after the impoundment, summed up its navigation-obstructing features, and proposed guarding the point bar on the convex bank and channel bar in the widening section as a key to maintaining the stability of the navigation channels.

Study on Influence of Silicate Morphology Based on pH Value

2012 ◽  
Vol 454 ◽  
pp. 324-328
Author(s):  
Yan He ◽  
Ya Jing Liu ◽  
Yong Lin Cao ◽  
Li Xia Zhou
Keyword(s):  
Silicic Acid ◽  
Ph Value ◽  
Colorimetric Method ◽  
Absorption Spectrometry ◽  
Degree Of Polymerization ◽  
Raw Material ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ph Values ◽  
The Stability

Infra-red absorption spectrometry, X-ray diffraction observations and characterization tests based on silicon molybdenum colorimetric method were used to investigate the optimal pH value controlling the stability of the silicic acid form. The experiment process was done by using sodium silicate as raw material. The results showed that the solution of silicate influenced the polymerization. The active silicic acid solution with a certain degree of polymerization was obtained by controlling the pH values.

scholarly journals Efficacy of Selective Grinding Guided by an Occlusal Splint in Management of Myofascial Pain: A Prospective Clinical Trial

2017 ◽  
Vol 11 (1) ◽  
pp. 301-311
Author(s):  
Felipe J. Fernández-González ◽  
Jorge Cabero-López ◽  
Aritza Brizuela ◽  
Ivan Suazo ◽  
Esteban Pérez-Pevida ◽  
...  
Keyword(s):  
Temporomandibular Joint ◽  
Myofascial Pain ◽  
Vertical Displacement ◽  
Occlusal Splint ◽  
Significant Difference ◽  
Before And After ◽  
Skeletal Pattern ◽  
Condylar Position ◽  
The Stability ◽  
Facial Types

Background:For patients whose centric relation (CR) has not been considered at the start and during treatment, the task of achieving an occlusal scheme that works together with the temporomandibular joint, the muscles, and the structures of the stomatognathic apparatus becomes a major concern.Objective:This study aims to describe a reproducible, predictable and to date unreported procedure of selective grinding guided by an occlusal splint and to analyze condylar position (CP) based on the skeletal pattern.Methods:A total of 72 symptomatic patients (38 females and 34 males) were classified into three groups: hyperdivergent, intermediate and hypodivergent. CP was quantified by mounted casts on a measures condyle displacement (MCD) device. Helkimo index was also performed in order to assess the severity of the temporomandibular joint (TMJ) disorders attending to clinical dysfunction, occlusal state and anamnestic dysfunction. Once the stability had been obtained, the splint was progressively reduced until the maximum intercuspation (MIC) was achieved.Results:The vertical displacement was found to be significantly different between the hyperdivergent and other two groups (p<0.01). Comparisons of MCD analysis before and after the selective grinding procedure identified a statistically significant difference in the horizontal and vertical CP (p<0.01) between the different groups whereas the Helkimo Index showed a clear improvement of TMJ disorders.Conclusion:All facial types, specially the hyperdivergent face type, showed a reduction in condylar displacement (CD) and less craniomandibular symptoms using this procedure, making it an excellent technique for clinicians.

Physicochemical investigation on thiomalate complexes of nickel

1968 ◽  
Vol 21 (3) ◽  
pp. 641 ◽  
Author(s):  
RS Saxena ◽  
KC Gupta ◽  
ML Mittal
Keyword(s):  
Aqueous Medium ◽  
Stability Constants ◽  
Alternative Methods ◽  
Acid System ◽  
Kcal Mole ◽  
Physicochemical Investigation ◽  
Different Temperatures ◽  
The Stability ◽  
Ph Range ◽  
Deep Violet

Potentiometric and conductometric studies of the nickel-thiomalic acid system, in aqueous medium of 0. lM KNO3, reveal the formation of two complexes; one light violet 1 : 1 predominating at pH 6.5-7.5 and another deep violet 1 : 2 in the pH range 8.5-10.0. The stability constants of the complexes formed have been determined by applying Calvin and Melchior's extension of Bjerrum's method at three different temperatures and were further refined by using alternative methods. The logK values (final) for 1 : 1 and 1 : 2 complexes at 20, 25, and 30� have been found to be 7.86, 7.87, 7.96, and 6.24, 6.31, 6.39 respectively. The values of the overall changes in ΔG, ΔH, and ΔS accompanying the reaction have also been evaluated at 25� and found to be -19.31 kcal/mole, -8.77 kcal/mole, and +35.36 cal/deg respectively.

Sign in / Sign up

Export Citation Format

Share Document