scholarly journals CHEMICAL COMPOSITION OF FEEDS DEPENDING ON BASIC SOIL TILLAGE METHODS AND NUTRITION BACKGROUND

2020 ◽  
Vol 15 (1) ◽  
pp. 32-37
Author(s):  
Vyacheslav Medvedev ◽  
Vladimir Fomin ◽  
Makarim Nafikov ◽  
Aydar Nigmatzyanov
Keyword(s):  
Chemical Composition ◽  
Nitrogen Content ◽  
Active Substance ◽  
Soil Tillage ◽  
Experimental Plot ◽  
Anhydrous Ammonia ◽  
Green Mass ◽  
Phosphorus Fertilizers ◽  
The Republic ◽  
Tillage Methods

In 2014–2016 in Zakame of the Republic of Tatarstan, a study was conducted to increase the productivity of corn (Mashuk 250 hybrid) for silage using various fertilizer systems (without fertilizers – control, NPK at 40 t/ha of green mass, PK - background, background + N40, background + N60 , background + N80, background + N100, background + N120) and tillage methods (plowing - control, tillage cultivation). The availability of phosphorus in the soil of the experimental plot was sufficient for the formation of the planned yield, therefore, phosphorus fertilizers were not added. The nitrogen content in the green mass of corn for plowing was 3.03 ... 3.85%, phosphorus - 0.45 ... 0.71%, potassium - 1.71 ... 1.98%, for non-dump processing, respectively - 3.01 ... 3, 83; 0.43 ... 0.69 and 1.69 ... 1.97%. Against an unfertilized background, the nitrogen content in the green mass of corn for plowing was equal to 3.03%, with the introduction of NK under the yield of 40 t/ha - 3.41%, K - 3.14%. In the variant with the use of anhydrous ammonia at a dose of 40 kg of active substance/ha against a background of potash fertilizers, the amount of nitrogen in the green mass was 3.34%, 60 kg - 3.41%, 80 kg - 3.43%, 100 kg - 3.76% and 120 kg - 3.85% (0.82% higher than unfertilized background). The maximum NPK removal in the experiment was observed by plowing in the background + N120 variant (1183; 218; 608 kg/ha, respectively), background + N100 (1114; 207; 584 kg/ha) and when fertilizing with a yield of 40 t/ha of green mass (1051; 206; 598 kg/ha). With subsurface processing, the take-off decreased, but the distribution of the first variants of this indi

scholarly journals Effect of different soil tillage methods on rhizobial nodulation, biyomas and nitrogen content of second crop soybean

2011 ◽  
Vol 5 (20) ◽  
pp. 3186-3194 ◽  
Author(s):  
Dogan Kemal ◽  
Celik Ismail ◽  
Gok Mustafa ◽  
Coskan Ali
Keyword(s):  
Nitrogen Content ◽  
Soil Tillage ◽  
Tillage Methods

scholarly journals INFLUENCE OF SOIL TILLAGE METHODS AND FERTILIZER ON CROP PRODUCTIVITY AND CORPORATION OF CORN SOWINGS

2018 ◽  
Vol 12 (4) ◽  
pp. 75-79
Author(s):  
Владимир Фомин ◽  
Vladimir Fomin ◽  
Макарим Нафиков ◽  
Makarim Nafikov ◽  
Вячеслав Медведев ◽  
...  
Keyword(s):  
Crop Productivity ◽  
Dry Mass ◽  
Nitrogen Fertilizers ◽  
Soil Tillage ◽  
Corn Yield ◽  
Mass Yield ◽  
Green Mass ◽  
Annual Grasses ◽  
The Republic ◽  
Green Mass Yield

The article presents the results of studies, conducted from 2014 to 2016 in the Western Kama region of the Republic of Tatarstan, for the purpose of comparative study the basic soil cultivation methods and the introduction of various types of nitrogen fertilizers for crop, cultivated for silage. Predecessor - annual grasses (vetch + oats). The dynamics of weediness of crops, its air-dry mass and green mass yield of corn in the phase of milk-wax ripeness were determined. For three years of research, the highest corn yield of green mass was obtained in the sixth variant (background + N120) - 406.6 centner per hectare. Economically advantageous was the dose of ammonia N120, where payment of one kilogram of active matter of fertilizers for the dumping of plowing amounted to 159 kg of green mass.

scholarly journals Characteristics of soil tillage for rice after alfalfa

2021 ◽  
Vol 843 (1) ◽  
pp. 012030
Author(s):  
D S Magomedova ◽  
N R Magomedov ◽  
S A Kurbanov
Keyword(s):  
Soil Fertility ◽  
Quality Indicators ◽  
Field Experiments ◽  
Rice Yield ◽  
Soil Tillage ◽  
Rice Grain ◽  
Harvesting Time ◽  
Green Mass ◽  
The Republic

Abstract The purpose of the research was to study the effect of harvesting time and methods of using alfalfa biomass on soil fertility and rice yield at different times of the main tillage. Field experiments were conducted in the Kizlyar district of the Republic of Dagestan according to the scheme: 1. autumn plowing after harvesting the 3rd mowing of alfalfa 3 years of use, control; 2. the overlapping of chopped green mass of alfalfa-3rd cut alfalfa 3 years of use; 3. spring plowing after harvesting the 1st cut alfalfa 4 years of use; 4. the overlapping of chopped green mass of alfalfa 1st cut alfalfa 4 years of use. The results shown that the best time for cutting the layer of perennial alfalfa is spring plowing of the green mass of alfalfa 1 mowing, which allows you to get a yield of 6 t/ha without reducing the quality indicators of rice grain. The data on the rice yield shows that in the spring tillage the yield was 5.41 t/ha, and in the autumn tillage only 4.91 t/ha. Carrying out sideration at both terms of the main tillage contributed to an increase in yield by 0.81-1.11 t/ha.

The Research of Iron Containing Wastes Modification Process of Leninabad Rare Metals Plant

2021 ◽  
Vol 410 ◽  
pp. 778-783
Author(s):  
Pavel V. Matyukhin ◽  
Daler I. Mirzoev
Keyword(s):  
Chemical Composition ◽  
Building Materials ◽  
Raw Material ◽  
Filling Material ◽  
Rare Metals ◽  
X Ray ◽  
Modification Process ◽  
Before And After ◽  
The Republic ◽  
Enrichment Process

The paper presents the results of ferriferous wastes modification process research carried on the basis of JCS “Leninobad rare metals Plant” located in the Republic of Tajikistan. The wastes for the study were taken from the western tailing. The article presents the justification of the chosen wastes as a filling material in the development of new radiation protective composite building materials. The data on the initial ferriferous chemical composition of the tailing wastes and the chemical composition of the material that passed the enrichment process is presented. The study contains microphotos of ferriferous haematite raw material particles surface before and after completing the modifying process. The paper presents and describes the study of X-ray phase analysis diffractograms of enriched iron-containing wastes before and after the modification process. The current research proves that the enrichment ferriferous wastes particles modification process is possible and as a result it can be used as a filling for the development of new kinds of radioprotective composite materials.

scholarly journals Long Term Effects of Ploughing and Conservation Tillage Methods on Earthworm Abundance and Crumb Ratio

Agronomy ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1552 ◽  
Author(s):  
Igor Dekemati ◽  
Barbara Simon ◽  
Igor Bogunovic ◽  
Ivica Kisic ◽  
Katalin Kassai ◽  
...  
Keyword(s):  
Water Content ◽  
Water Conservation ◽  
Conservation Tillage ◽  
Soil Tillage ◽  
Long Term Effects ◽  
No Till ◽  
Cover Ratio ◽  
One Year ◽  
Tillage Methods

In addition to the dry (D) and rainy (R) seasons, a combination of the two i.e., rainy-dry (RD) and dry-rainy (DR), can also be observed in one year. The effects of the dry (D) and rainy (R) on soil are known, hence we hypothesized that the effects of the rainy-dry (RD) and dry-rainy (DR) periods on soil may differ from the former assessments. The aim of the study is to investigate the effect of six tillage treatments (ploughing—P, disk tillage—DT, loosening—L, tine tillage (a deeper—T and a shallower—ST) and no-till—NT) on earthworm abundance and crumb ratio during a long-term research (16 years) on Chernozems. The results related to the four year-groups (D, R, RD, and DR) with different residue cover. Seven degrees of cover ratio (between 12.5% and 62.5%) were selected on stubbles. Higher cover ratio (≥52.5%) improved water conservation, increased earthworm abundance (31 and 41 ind m–2) and crumb (78 and 82%) ratio (p < 0.01). R year came first in the rank of water content and earthworm abundance and DR proved to be more favorable for crumb formation. Considering the rank of soil tillage treatments, ST takes first place in evaluation of soil water content (SWC) and crumb ratio, and NT for earthworm abundance.

scholarly journals Chemical composition and insecticidal activity of Aeollanthus pubescens Benth leaf essential oil on the malaria vector Anopheles gambiae (Diptera: Culicidae)

2020 ◽  
Author(s):  
Roméo Barnabé Bohounton ◽  
Luc Salako Djogbénou ◽  
Oswald Yédjinnavênan Djihinto ◽  
Oronce Sedjro-Ludolphe Dedome ◽  
Pierre Marie Sovegnon ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Essential Oil ◽  
Anopheles Gambiae ◽  
Malaria Vector ◽  
Larval Mortality ◽  
Alternative Approach ◽  
Leaf Essential Oil ◽  
Republic Of Benin ◽  
The Republic ◽  
Major Malaria Vector

AbstractThe use of synthetic insecticides is responsible for many cases of resistance in insects. Therefore, the use of natural molecules of ecological interest with insecticidal properties turns out to be an alternative approach to the use of synthetic insecticides. This study aims at investigating the larvicidal, adulticidal activity and the composition of the essential oil of Aeollanthus pubescens Benth on the major malaria vector Anopheles gambiae.The leaves of Aeollanthus pubescens were collected in the South of the Republic of Benin. Three reference strains of Anopheles gambiae s.s. such as Kisumu, Kiskdr and Acerkis were used. The chemical composition of the essential oil was analysed by gas chromatography coupled to mass spectrometry. Larvae were exposed to the essential oil extract for 24 h. Adult mosquitoes were exposed to the fragment nets coated with the essential oil for 3 min. Larval mortality and adult survivorship were monitored.Fourteen components were identified representing 98.31% of the total of oil. The major components were carvacrol (51.06 %), thymyle acetate (14.01 %) and γ-terpinene (10.60 %). The essential oil has remarkable larvicidal properties with LC50 of 29.26, 22.65, and 28.37 ppm respectively on Kisumu, Acerkis and Kiskdr strains. With the fragment net treated at 165 µg/cm2, the KDT50 of both Acerkis (1.71 s, p < 0.001) and Kiskdr (2.67 s, p < 0.001) individuals were significantly lower than that of Kisumu (3.77 s). The lifespan of the three mosquito strains decreased respectively to one day for Kisumu (p < 0.001), two days for Acerkis (p < 0.001) and three days for Kiskdr (p < 0.001) compared to their control.Our findings show that the Aeollanthus pubescens essential oil is an efficient larvicide and adulticide against malaria vector Anopheles gambiae. This bioinsecticidal activity is a promising discovery for the control of the resistant malaria-transmitting vectors.

scholarly journals Influence of basic soil tillage methods on fresh yield and quality of winter rape cultivars

2020 ◽  
Vol 15 (4) ◽  
pp. 335-342
Author(s):  
Anvar Sh. Gadzhikurbanov
Keyword(s):  
Crop Yields ◽  
Maximum Yield ◽  
Soil Tillage ◽  
Flowering Stage ◽  
Winter Rape ◽  
Yield And Quality ◽  
Significant Difference ◽  
Weed Infestation ◽  
The Republic

The development of rational system of basic soil tillage results in formation of sufficiently high crop yields. A two-factor field experiment was carried out to address these issues when cultivating winter rape cultivars on light chestnut soils of the Primorsko-Caspian sub-province of the Republic of Dagestan. VEM (standard), Elvis and Meteor winter rape cultivars were studied in the experiment. The following methods of soil tillage were studied: real tillage (control), subsoil tillage. The research revealed that there was no significant difference in agrophysical indicators between the soil cultivation variants. Data on weed infestation of winter rape fields showed that the number of weeds and their weight increased significantly after subsoil tillage. At the budding stage, the number of weeds increased 2.1-fold compared to the control (real tillage), and the weight of weeds increased 1.88-fold. During flowering stage, these indicators were 2.2 times higher. The maximum yield in all variants of the experiment was formed by Elvis cultivar - 44.9 and 41.4 t/ha, respectively, which is more than VEM (standard) and Meteor cultivars by 20.4 t/ha (7.9 %) and 20.0 t/ha (8.7 %), respectively. The yield of Meteor cultivar in these variants was also high and amounted to 41.6 and 38.1 t/ha, respectively, which was higher by 11.5 and 10.4 % compared with the standard. The greatest increase in the fresh yield was provided by real tillage. On average, the yield increased by 8.7 % for varieties in comparison with subsoil cultivation. Elvis cultivar formed the best quality indicators, followed by Meteor cultivar.

scholarly journals Analysis of the treatment of plastic from electrical and electronic waste in the Republic of Serbia and the testing of the recycling potential of non-metallic fractions of printed circuit boards

2017 ◽  
Vol 71 (3) ◽  
pp. 271-279
Author(s):  
Aleksandra Vucinic ◽  
Zeljko Kamberovic ◽  
Milisav Ranitovic ◽  
Tihomir Kovacevic ◽  
Irena Najcevic
Keyword(s):  
Chemical Composition ◽  
Printed Circuit Boards ◽  
Electronic Waste ◽  
Circuit Boards ◽  
Printed Circuit ◽  
Waste Printed Circuit Boards ◽  
Mechanical Methods ◽  
The Republic ◽  
Electrical And Electronic Waste ◽  
Metallic Fractions

This paper presents the analysis of the quantity of plastic and waste printed circuit boards obtained after the mechanical treatment of electrical and electronic waste (E-waste) in the Republic of Serbia, as well as the recycling of non-metallic fractions of waste printed circuit boards. The aim is to analyze the obtained recycled material and recommendation for possible application of recyclables. The data on the quantities and treatment of plastics and printed circuit boards obtained after the mechanical treatment of WEEE, were gained through questionnaires sent to the operators who treat this type of waste. The results of the questionnaire analysis showed that in 2014 the dismantling of E-waste isolated 1,870.95 t of plastic and 499.85 t of printed circuit boards. In the Republic of Serbia, E-waste recycling is performed exclusively by using mechanical methods. Mechanical methods consist of primary crushing and separation of the materials which have a utility value as secondary raw materials, from the components and materials that have hazardous properties. Respect to that, the recycling of printed circuit boards using some of the metallurgical processes with the aim of extracting copper, precious metals and non-metallic fraction is completely absent, and the circuit boards are exported as a whole. Given the number of printed circuit boards obtained by E-waste dismantling, and the fact that from an economic point of view, hydrometallurgical methods are very suitable technological solutions in the case of a smaller capacity, there is a possibility for establishing the facilities in the Republic of Serbia for the hydrometallurgical treatment that could be used for metals extraction, and non-metallic fractions, which also have their own value. Printed circuit boards granulate obtained after the mechanical pretreatment and the selective removal of metals by hydrometallurgical processes was used for the testing of the recycling potential. Granulometric analysis as well analysis of chemical composition of obtained fractions was performed. Subsequently, the manual classification of different types of polymeric material contained in the granulate was made, and both the apparent specific gravity and the chemical composition of the classified types of polymeric materials were determined. Chemical composition of granulate was determined by X-Ray Fluorescence (XRF) using Thermo Scientific Niton XL 3t, while the identification of residual polymers was determined by the FTIR (Fourier Transform Infrared Spectroscopy) method on the Bomen MB 100 device in range 4000 to 400 cm?1. Based on the results of this study, it can be concluded that after the hydrometallurgical treatment of printed circuit boards, and the separation of metals that have the highest value, the residual non-metallic fraction have the utility value and can be used for various purposes, such as developing new polymer materials for technical purposes that have been investigated by many researchers and mentioned in this article.

scholarly journals Effect of Vineyard Floor Management on Seasonal Changes of Cultivable Fungal Diversity in the Rhizosphere

Agriculture ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 534
Author(s):  
Barnabás Kovács ◽  
Csaba Dobolyi ◽  
Flóra Sebők ◽  
László Kocsis ◽  
Zoltán Tóth
Keyword(s):  
Fungal Diversity ◽  
Plant Protection ◽  
Fungal Communities ◽  
Soil Tillage ◽  
Fungal Colonization ◽  
Lower Intensity ◽  
Fungal Community Structure ◽  
Vineyard Floor Management ◽  
Lower Ratio ◽  
Tillage Methods

Vineyard floor management has been widely discussed for many decades, but it is still unclear how its intensity levels change the fungal community structure of grape rhizosphere. Our objective was to examine the density and rate of the habitats of fungi in three vineyards that differ only in the methods of tillage procedure applied, namely intensive, extensive and none (abandoned). The hypothesis was that in the cases of lower intensity or no soil tillage, there would be a higher level of fungal diversity with a lower ratio of pathogen strains in grape rhizosphere. In the course of this research, it has been determined that the level of fungal colonization of roots is the highest in the extensively managed vineyard, unrelated to season (spring and summer). Four of the five fungal genera detectable in all of the three sampled vineyards are registered as opportunist grape pathogens, however the fifth one, Trichoderma, is commonly used in biological plant protection. The diversity of fungal communities in grape rhizosphere, in accordance with the expectations, was the lowest in the intensively cultivated and highest in the abandoned vineyard, and it was not affected by seasons. The proportion of opportunist plant pathogen groups was higher in the intensive variant than in the other two (less-intensive variants); therefore, it is possible to conclude that soil under similar conditions but disturbed by intensive tillage methods tends to exhibit lower suppressivity.

Sign in / Sign up

Export Citation Format

Share Document