Determining the reliability of suppliers on the basis of input control

10.12737/2203 ◽  
2014 ◽  
Vol 3 (4) ◽  
pp. 185-192
Author(s):  
Лазарев ◽  
Ilya Lazarev
Keyword(s):  
Raw Materials ◽  
Meat Processing ◽  
High Quality ◽  
Processing Industry ◽  
Russian Market ◽  
Industrial Processing ◽  
Input Control ◽  
Incoming Inspection

The article deals with problems of adaptation of meat processing industry to the conditions of WTO, which involve increased competition in the Russian market, and the need to produce high-quality finished products. And this is possible only if the quality of raw materials is good. Meat processing companies currently depend on import supplies. Urgency of the problem, which is devoted to the article, is proved by the need for incoming inspection procedures by which you plan to prevent counterfeit and unsafe meat to industrial processing.

Impact of Raw Material Quality on Performance of Mixing and Charging Machines in Drilling and Blasting Operations

2021 ◽  
pp. 69-73
Author(s):  
T.S. Morozova
Keyword(s):  
Diesel Fuel ◽  
Raw Materials ◽  
Raw Material ◽  
Production Facility ◽  
High Quality ◽  
Equipment Failures ◽  
Hazardous Production ◽  
Materials Used ◽  
Incoming Inspection

A study into the failure causes of mixing and charging equipment confirms that the main impact on the probability of accidents is the use of raw materials that do not meet the specifications and have unstable properties. The raw materials used for explosives preparation in mechanized charging of boreholes include such components as ammonium nitrate, emulsion phase, diesel fuel, emulsifier and others. The paper describes the application of various formulations with these components in specific types of mixing and charging machines manufactured by AZOTTECH LLC. The main properties that affect the quality of raw materials are summarised, and the incoming inspection of explosive components is described as part of the acceptance procedure at temporary storage sites at a hazardous production facility. The paper describes common types of equipment failures and maintenance procedures when using substandard raw materials. The conclusion highlights the key practices to improve the equipment uptime as well as recommendations for incoming inspection and the use of high-quality explosive components.

TECHNOLOGICAL ASPECTS OF HIGH QUALITY RAW MATERIAL OBTAINING FOR PECTIN PRODUCTION

1970 ◽  
pp. 47-50
Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun
Keyword(s):  
Raw Materials ◽  
Thermal Characteristics ◽  
Environmental Safety ◽  
Raw Material ◽  
High Quality ◽  
Temperature Conductivity ◽  
Drying Temperature ◽  
Plant Raw Materials ◽  
Gel Forming Ability

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.

Synthesis of Low Viscosity Polydimethylsiloxane Using Low Grade of Octamethylcyclotetrasiloxane

2021 ◽  
Vol 1028 ◽  
pp. 365-370
Author(s):  
Diba G Auliya ◽  
Soni Setiadji ◽  
Zulfi Mofa Agasa ◽  
Fitrilawati ◽  
Norman Syakir ◽  
...  
Keyword(s):  
Ring Opening ◽  
Raw Materials ◽  
Vitreoretinal Surgery ◽  
Production Costs ◽  
Low Grade ◽  
High Grade ◽  
High Quality ◽  
Low Viscosity ◽  
Polymerization Method

Polydimethylsiloxane (PDMS) has been widely used as a vitreous humour substitution in vitreoretinal surgery. Due to its limited availability and increasing domestic needs, the price of PDMS in Indonesia became very expensive. Previously, we reported the synthesized of PDMS from a high grade of monomer of 98% of Octamethylcyclotetrasiloxane (D4) and found that all PDMS samples produced high quality samples similar to that of commercial one. However, by considering the ease of obtaining raw materials and also the production costs, the synthesis of PDMS using monomer which easy to be found in Indonesia and low production costs is needed to be developed. Here, we reported the synthesis of PDMS using low grade of 96% of D4 in order to produce high quality of PDMS with low viscosity that can be used for vitreous humous substitution in vitreoretinal surgery. PDMS samples with low viscosity value of 0.94-1.35 Pa.s have been successfully synthesized from low grade of D4 and MM using ring-opening polymerization method. The yields of PDMS resulted in this research were in the range between 67.27% and 76.26%. From FTIR spectroscopy, it is found that all synthesized samples have structure and functional groups similar to PDMS using high grade of monomer of 98% Octamethylcyclotetrasiloxane (D4). From refractometer and surfgauge measurements, all samples have refractive index in the range of 1,4034-1,4040 and the value surface tension was 21 m.N/m.

scholarly journals DIFFERENTIATION OF DEVELOPMENT OF SUB-SECTOR OF PROCESSING INDUSTRY OF AGRICULTURAL SECTOR OF VINNITSA REGION

2020 ◽  
pp. 7-23
Author(s):  
Grygorii KALETNIK ◽  
HONTARUK Yaroslav
Keyword(s):  
Agricultural Sector ◽  
Raw Materials ◽  
Industrial Complex ◽  
State Budget ◽  
Processing Industry ◽  
Industrial Processing ◽  
Promising Area ◽  
Energy Independence ◽  
Labor Resources ◽  
Regional Product

The article analyzes the approaches to the interpretation of the concept of differentiation. The own interpretation of the concept of differentiation of development of branches as process of development of the enterprises on indicators of efficiency of use of actives, own capital, labor resources, efficiency of manufacture and possibility of creation of new kinds of production is offered. The components of the processing industry of the agro-industrial complex of Vinnytsia region are studied and the main ones are determined. The main factors influencing the development of differentiation of enterprises of the processing industry of the agricultural sector are analyzed. The analysis on the basic financial indicators of activity of the processing enterprises of agrarian sector of Vinnytsia region depending on the size of the organizations is carried out. Prospects for the privatization of distilleries in Ukraine are highlighted. The possibility of product differentiation at the enterprises of agro-industrial complex processing with orientation on creation of new productions is substantiated. The low level of management of distilleries was confirmed and the prospects of privatization of these organizations in accordance with the current legislation were outlined. It is determined that the main promising area of sectoral differentiation of the processing industry of the agro-industrial complex is the formation of sugar, meat processing, agricultural and alcohol industries on the basis of raw materials - production of biofuels (biogas, bioethanol). These studies show that the developed areas of differentiation of processing enterprises will avoid the practice of concealing profits at enterprises, increase revenues to the state budget from the alcohol industry; achieve growth in foreign investment. Improving the management of enterprises in the agro-industrial processing industry will contribute to the growth of the gross regional product and the profitability of production in the processing sectors of the agricultural sector. This will increase the energy independence of the region, reduce energy costs of distilleries, improve the environmental condition of water resources in the region, reduce greenhouse gas emissions and provide the livestock industry with protein feed.

scholarly journals PENGEMBANGAN PRODUKSI MINUMAN RUMPUT LAUT EUCHEMA COOTONII DI DESA TATELI TIGA KECAMATAN MANDOLANG, KABUPATEN MINAHASA

2019 ◽  
Vol 6 (12) ◽  
Author(s):  
Lexy Karel Rarung ◽  
Berty E. Kaseger
Keyword(s):  
Raw Materials ◽  
Processing Industry ◽  
Industrial Processing ◽  
Counseling Training ◽  
Specific Target ◽  
Economic Class ◽  
North Sulawesi ◽  
Beverage Industry ◽  
Food And Beverage ◽  
New Business

AbstractThe target of this program is located in Tateli Tiga Village, Mandolang District, Minahasa Regency, which is geographically very strategic for developing seaweed beverage processing industries. This village is a culinary tourism area, where there are many food and beverage entrepreneurs. North Sulawesi, is a large producer of seaweed, thus the availability of raw materials is easy to obtain and adequate for industrial processing. Processing of seaweed drinks consisting of syrup, juice and instant powder, is very easy and the marketing is not difficult, can be reached by the upper and lower economic class communities. The aim of this program is to develop new business fields to improve the economy of the community and increase the selling value and economy of seaweed. The specific target of this PKM program is 1. producing seaweed drinks to meet sanitary and hygienic requirements, packaged and labeled well / attractively 2. Developing seaweed syrup beverage industry business. The implementation methods agreed with partners are: 1. Problems in the production of seaweed syrup drinks, product marketing and finance 2. Methods for solving problems with counseling, training, mentoring and evaluation. 3 Work procedures for solving problems through surveys, counseling, training, mentoring, evaluation, reporting and journals.Keywords: Euchema cootonii, syrup, processing industry Abstrak        Sasaran program ini berlokasi di Desa Tateli Tiga Kecamatan Mandolang Kabupaten Minahasa, yang secara geografi sangat strategis untuk dikembangkan industri pengolahan  minuman rumput laut. Desa ini merupakan daerah wisata kuliner, dimana terdapat banyak pengusaha makanan dan minuman. Sulawesi utara, merupakan penghasil rumput laut yang besar, dengan demikian ketersediaan bahan baku mudah diperoleh dan memadai untuk pengolahan secara industri.  Pengolahan minuman rumput laut yang terdiri dari sirup, sari dan serbuk instant, sangat mudah serta pemasarannya  tidak sukar, dapat dijangkau oleh masyarakat kelas ekonomi  atas maupun bawah. Tujuan program ini yaitu pengembangan lapangan usaha baru untuk meningkatkatkan ekonomi masyarakat serta meningkatkan nilai jual dan ekonomi rumput laut. Target khusus program PKM ini  yaitu 1. memproduksi minuman  rumput laut memenuhi syarat sanitasi dan higienis, dikemas dan dilabel dengan baik/menarik  2.  Mengembangkan usaha  industri minuman sirup rumput laut . Adapun metoda pelaksanaan yang disepakati dengan mitra yaitu: 1. Masalah produksi minuman sirup rumput laut, pemasaran produk dan keuangan 2. Metoda untuk menyelesaikan masalah dengan penyuluhan, pelatihan, pendampingan dan evaluasi. 3 Prosedur kerja untuk menyelesaikan masalah melalui survey, penyuluhan, pelatihan, pendampingan, evalusi, pelaporan dan jurnal.Kata kunci: Euchema cootonii, sirup, industri pengolahan

scholarly journals Reforestation of ‘Village Forest’ to Improve Sustaiability Creative Industries in Desa Siponjot

2021 ◽  
Vol 5 (2) ◽  
pp. 714-722
Author(s):  
Noverita Sprinse Vinolina ◽  
Antonio Marro Sipayung ◽  
Dardanila ◽  
Sondang Pintauli
Keyword(s):  
Forest Restoration ◽  
Raw Materials ◽  
Economic Value ◽  
Economic Benefits ◽  
Musical Instruments ◽  
Creative Industries ◽  
Raw Material ◽  
High Quality ◽  
The Village

This program is conducted to assist Siponjot Village while empowering the people of Siponjot Village to be able to utilize and maximize the benefit of the village forest. Village forest might support the availability of raw materials required for making musical instruments, such as high quality of wood, including how to process wood waste from making musical instruments to be used as creative souvenirs and improve the economic value. The raw material for production determined its results of the production of wood-based musical instruments. Thus, in order to produce a high quality tanginang, hasapi, and gondang, which previously began to be produced by arts crafts in the Sitangkubang area of ​​Siponjot Village, a high quality of raw materials is needed. The community service team surveyed the location of planting seeds for village forest restoration, provided socialization related to the importance of village forest cultivation and the suitability of the Siponjot Village area for the cultivation of these plants. Village forest restoration aims to maintain the beauty and beauty of the village. Implementation of village reforestation activities starting from socializing forest tourism and the strength of village forests to the community, followed by a discussion about village forest management and its economic benefits. Handover of a thousand units of forest plant seedlings given to the villagers of Siponjot as part of the forest restoration program in the area.

Development and production of large blast furnaces from 2015 to 2016 in China

2020 ◽  
Vol 117 (1) ◽  
pp. 108 ◽  
Author(s):  
Bing Dai ◽  
Hong-ming Long ◽  
Yong-cai Wen ◽  
Yi-long Ji ◽  
Yun-cai Liu
Keyword(s):  
Raw Materials ◽  
Blast Furnaces ◽  
Security Risk ◽  
Hot Metal ◽  
High Quality ◽  
Large Blast ◽  
Existing Problems ◽  
Cost Cutting ◽  
The Future

This article has reviewed the production status, total reductant consumption, raw materials and operation principle indexes of large blast furnaces in China from 2015 to 2016. The developing actuality of Chinese large BFs has been quantitatively analyzed and the existing problems have been proposed clearly. Based on that, maintaining production stable, enhancing the quality of raw materials and improving the operation principles are suggested. Large BFs take advantages of high-quality hot metal, energy saving, cost-cutting, high mechanization and automation levels and are sufficient to meet the challenges of economic crisis, environmental pressure and security risk form the future. Thus, the number of large BFs in China will continue to increase in the future.

scholarly journals New technological and technical solutions in dietary pear compote production

2020 ◽  
Vol 161 ◽  
pp. 01056
Author(s):  
Magomed Akhmetov ◽  
Amiiat Demirova ◽  
Vladimir Piniaskin ◽  
R.A. Rakhmanova
Keyword(s):  
Water Vapor ◽  
Traditional Method ◽  
Raw Materials ◽  
Hot Water ◽  
Saturated Water Vapor ◽  
High Quality ◽  
Saturated Water ◽  
Preliminary Preparation ◽  
Physical And Chemical

Perfection of technological processes, both in preliminary preparation of raw materials and during the final mandatory step of pasteurization, plays a key role in ensuring the quality of finished products, which is important in the production of canned dietary products. The aim of the research was to develop a more efficient way of blanching raw materials with its hardware and soft pasteurization modes, which will allow the production of high quality and competitive compotes for functional nutrition. We have developed and proposed a method of pulse-steam blanching of raw materials directly in glass jars with saturated water vapor, instead of the traditional method using hot water. The essence of the method is as follows. Fruits stacked in jars are pulse heated for 100–160 seconds (depending on the volume of the container) with saturated water vapor with temperature of 105–110 °C, and then fed into jars with cycles of 10 and 10 seconds respectively. The use of pulsed supply of saturated water vapor contributes to achieving more even heating of the fruit, which are characterized by a relatively large internal thermal resistance, causing overheating of the surface layers, and also provides an increase in the temperature of the product, which allows to pour into the jars syrup at relatively high temperature (97–98 °C), while the traditional technology accounts for the temperature of only 80–85 °C. Implementation of this method ensures the temperature level of the product entering the pasteurization stage being 78–80 °C, as opposed to the traditional method, where the temperature of the product is 45–48 °C. After that, the jars will be filled with syrup with a temperature of 97–98 °C, sealed and sent for pasteurization on accelerated modes. To implement the new method of blanching, the design of the device for pulse-steam blanching of fruits in glass jars has been developed. New thermal sterilization regimes have been developed, taking into account the increased temperature of the product after sealing and improved technology for the production of pear compote. The results of physical and chemical testing confirm the high quality of the finished product.

Approximating Ukraine’s Laws to Those of the European Union Concerning Meat and Meat Products Cold Chain

2020 ◽  
Vol 9 (3) ◽  
pp. 978
Author(s):  
Kateryna O. RODIONOVA ◽  
Volodymyr M. STESHENKO ◽  
Ivan V. YATSENKO
Keyword(s):  
European Union ◽  
Meat Products ◽  
Legal Regulation ◽  
Cold Chain ◽  
The European Union ◽  
Meat Processing ◽  
Processing Industry ◽  
Eu Legislation ◽  
The Eu

The main objectives of the research were such: to define the concept of cold chain as an object of legal regulation; to find out the content and features of the EU legislation on the safety and quality of meat and meat products during cold chain and its use in Ukraine; to characterize the legal bases of the current legislation of Ukraine on ensuring the safety and quality of meat and meat products during cold chain, to formulate proposals and recommendations aimed at improving the national legislation of Ukraine by approximating it to the EU legislation, which sets requirements for the safety and quality of meat and meat products throughout cold chain. To achieve the abovementioned objectives, the following methods were used: comparative legal, analytical, systemic, dialectical, generalizing, specific-search, structural-functional, semantic, methods of deduction and induction, etc. The content and features of the legal regulation of the safety and quality of meat and meat products in the current legislation of the European Union and Ukraine have been clarified. For the first time, the definition of the term 'cold chain' has been proposed by reference to it in author's editorial, which should influence its clearer scientific and practical understanding. It is determined that the temperature regimes of cold processing, storage and transportation of meat and meat products in Ukraine are regulated by a large number of legal acts, in particular: national standards of Ukraine (DSTU), technical regulations, technological instructions, rules of transportation, etc. It is found that national legal acts do not provide a systematic understanding of the particularities of cold chain legal regulation in the meat processing industry in order to ensure the safety and quality of meat and meat products. As a result of departmental inconsistency, the existing storage temperature parameters for the same product type in different legal acts differ from each other, which does not allow to determine the actual storage periods at different stages of the cold chain. In addition, current legal acts in Ukraine do not provide for constant monitoring of the temperature of cold-processed meat and meat products throughout all cold chain units and the hygienic condition of refrigerators throughout the shelf life. As a result, the cold chain is very difficult to be controlled and requires a large number of factors to be taken into account in order to bring safe and high-quality meat and meat products to the end consumer. According to the results of the research, proposals and recommendations are formulated to improve the national legislation of Ukraine governing the cold chain in the meat processing industry.

scholarly journals ANTHOCYANINS PROFILES OF SOME AUTOCHTONOUS GRAPEVINE CULTIVARS FOR RED WINES, CULTIVATED AT DRĂGĂȘANI, ROMÂNIA

2020 ◽  
Vol 1 (1) ◽  
pp. 95-102
Author(s):  
Felicia Tutulescu ◽  
Aurel Popa
Keyword(s):  
Raw Materials ◽  
Cabernet Sauvignon ◽  
Red Wines ◽  
High Quality ◽  
White Wines ◽  
Red Pigments ◽  
Grapevine Cultivar ◽  
Visual Attraction ◽  
Anthocyanin Pigments

The Dragasani vineyard is one of the most ancient existing in Romania being famous for obtaining red and white wines of the highest quality. The present study has performed during five years (2005-2009), focusing on the anthocyanin profiles of the autochthonous Novac grapevine cultivar, in comparison with Cabernet Sauvignon cultivar which, also provides wines of high quality. The obtained results put into evidence, a special potential and chromatic structure in case of the grapes and wines characteristics for these autochthonous cultivars, which are very closed to those shown by the Cabernet Sauvignon. For all the cultivars studied, the amounts of cationical flavidium within the anthocyanin matter do keep continuously was growing, while acidity decreased and glucides was accumulated. However, at some moment, these synthesis indices of the cromatical structure’s quality begin to decline. Depending of the viticultural year it is the genetical nature of the respective anthocyanin pigments to differentiate through the involvements of each of the 3 categories of pigments (yellow, red or blue). During the wine’s evolution (maturation and aging), due to the modification of its cromatical structure, the ratio between the yellow and red pigments does confer to the wine a colour nuance which continues to increase, significantly improving the wine’s visual attraction. For the autochthonous grapevine cultivars for red wines, their antocyanins potential their respective qualities do enable us to state that on the basis of the quality of the raw materials, wine types of high qualities could be created, being so endowed that they could bear as well an origin denomination.

Sign in / Sign up

Export Citation Format

Share Document