scholarly journals Correlation coefficients, path analysis and disease reaction between yield and yield components in Potato (Solanum tuberosum L.) genotypes in Bale, South Eastern Ethiopia

2016 ◽  
Vol 3 (3) ◽  
pp. 293
Author(s):  
Getachew Workalemahu ◽  
Wassu Mohammed

Study on the relationships between yield and its components will improve the efficiency of breeding programmes by determining appropriate selection criteria. An investigation was carried out on 24 potato genotypes to find out the association among yield, yield components and their direct and indirect effects on tuber yield of potato. The experiment was laid out in randomized complete block design with three replications at Sinana Agricultural Research Center. The association was analyzed by correlation coefficient, and further subjected to path analysis to estimate direct and indirect effects of each character on tuber yield. Positive and significant genotypic and phenotypic correlation were found between total tuber yield and marketable tuber yield (rg=0.99), leaf area index (rg=0.82), plant height(rg=0.56), stem number per plant(rg=0.56), average tuber weight (rg=0.74)  and biomass yield (rg=0.69). Path analysis of tuber yield and its components shows that marketable tuber yield and average tuber weight had maximum positive direct genotypic and phenotypic effect on total tuber yield indicating their importance in selection for tuber yield improvement.

2014 ◽  
Vol 60 (No. 8) ◽  
pp. 379-386 ◽  
Author(s):  
M. Kołodziejczyk

The effect of nitrogen fertilization and microbial preparations on yielding and development of potato tuber yield components were assessed in field experiments conducted under soil conditions of Luvic Chernozem. The factors of the experiment were nitrogen fertilization levels: 0, 60, 120 and 180 kg N/ha and the following preparations: BactoFil B10, effective microorganisms and UG<sub>max</sub> soil fertilizer. Nitrogen fertilization caused a significant increase in marketable yield of potato tubers. Yield increments on individual fertilizer treatments ranged from 66% to 140%. An evident effect of this factor was also visible regarding the yield components values. Increase in the number of main stems per 1 m<sup>2</sup> under the influence of growing nitrogen doses occurred from the fertilization level 120 kg N/ha, whereas the number of tubers per 1 stem increased only to the level of 60 kg N/ha. Each nitrogen dose applied within the range to 180 kg N/ha caused a marked increase in an average tuber weight. Conducted investigations demonstrated an unfavourable effect of microbial preparations on the marketable crop yield of tubers and formation of yield components. On the objects where microbial preparations were applied, the marketable yield was lower by 1.5 to 2.3 t/ha than in the control. Analysis of linear regression revealed occurrence of significant dependencies between the total tuber yield and the values of individual yield components. The relationships were the most visible for an average tuber weight formation as evidenced by the value of coefficient of determination&nbsp;(R<sup>2</sup> = 0.983).


2012 ◽  
Vol 12 (4) ◽  
pp. 245-252 ◽  
Author(s):  
Jeane de Oliveira Moura ◽  
Maurisrael de Moura Rocha ◽  
Regina Lúcia Ferreira Gomes ◽  
Francisco Rodrigues Freire Filho ◽  
Kaesel Jackson Damasceno e Silva ◽  
...  

The objective of this study was to estimate the direct and indirect effects of agronomic and culinary traits on iron and zinc contents in 11 cowpea populations. Correlations between traits were estimated and decomposed into direct and indirect effects using path analysis. For the study populations, breeding for larger grain size, higher number of grains per pod, grain yield, reduced cooking time, and number of days to flowering can lead to decreases in the levels of iron and zinc in the grain. Genetic gains for the iron content can be obtained by direct selection for protein content by indirect effects on the number of grains per pod, 100-grain weight and grain yield. The positive direct effect of grain size and protein content on the zinc content indicates the possibility of simultaneous gain by combined selection of these traits.


Author(s):  
Rhitisha Sood ◽  
R.K. Mittal ◽  
V.K. Sood ◽  
Shailja Sharma

Background: Blackgram despite of being a highly nutritious and short duration legume crop, it is not cultivated on large scales due to many constraints. Considering this, the research was aimed to develop blackgram genotypes with wider adaptability, genetic variability and high yielding potential by studying nature and magnitude of association among yield and related traits for effective production. Methods: The present investigation was carried out at Experimental Farm of the Department of Genetics and Plant Breeding, College of Agriculture, CSK HPKV, Palampur (H.P.) to assess the character association and direct and indirect effects among yield and related traits in 14 crosses and ten parents for 11 quantitative characters during Kharif 2018 and 2019 in randomized complete block design with three replications. Result: Correlation studies highlighted that seed yield per plant had significant and positive association with pods per plant, biological yield per plant, pod length, plant height and 100 seed-weight at genotypic and phenotypic levels in both generations. Study of path analysis revealed that biological yield per plant and pods per plant exhibited maximum positive direct and indirect effects to the total association between yield and other component traits in both the generations. These traits could be suggested as best selection indices on priority basis which would be commendable to improve the performance of genotypes during breeding programme.


2016 ◽  
Vol 8 (1) ◽  
pp. 35-39
Author(s):  
G. Girish ◽  
S. B. Kiran ◽  
R. Lokesh ◽  
Vikas Vikas ◽  
V. Kulkarni ◽  
...  

The field experiment was carried out using advanced breeding lines of rabi sorghum to study association among the yield and its component traits, direct and indirect effects of traits on the yield. Association studies indicated that seed yield per plot showed significant positive correlation with traits viz., plant height (rp=+0.7243, rg=+0.7409), ear head length (rp=+0.6002, rg=+0.6021), 100 seed weight (rp=+0.1593, rg=+0.1880), fodder yield (rp=+0.9434, rg=+0.9476) and lodging percentage (rp=+0.5263, rg=+0.5646) at both phenotypic and genotypic level.Genotypic correlation was higher magnitude than phenotypic correlation. Revealed increase in ear head length will increase the seed yield. Partitioning of yield and yield components both at phenotypic and genotypic levels into direct and indirect effects revealed that positive direct effects of ear head length (Ppi=+0.2533, Pgi=+0.5241), ear head diameter (Ppi=+0.0669, Pgi=+0.2580), days to maturity (Ppi=+0.0338, Pgi=+0.1193), fodder yield (Ppi=+0.6484, Pgi=+0.7461) were relatively high and followed by less lodging percentage (Ppi=+0.1751, Pgi=+0.2263). Residual effects were Pr=0.1303 and Gr=0.0624 at phenotypic and genotypic levels. Indicating importance of these characters and can be strategically used to improve the seed yield of sorghum.


1978 ◽  
Vol 90 (1) ◽  
pp. 215-219 ◽  
Author(s):  
P. C. Gaur ◽  
H. Kishore ◽  
P. K. Gupta

SUMMARYThe phenotypic, genotypic and environmental correlation coefficients were calculated for 13 morphological and tuber quality characters, 17 of 78 possible combinations were found to be significant. Tuber yield was positively associated with average tuber weight and with total tuber dry matter per plant. Average tuber weight was negatively associated with number of tubers per plant and with most of the quality characters. The indices for selection for tuber yield were computed using the yield components and yield only. It was observed that the selections based on tuber yield itself are likely to be superior to those based on yield components. However, an index involving the yield components and the yield was found to be most efficient.Among the tuber quality characters, percentage tuber dry matter showed significant positive association with the percentage alcohol-insoluble solids (AIS) and with the percentage of starch in fresh tubers, and a negative association with the percentage of protein in tuber dry matter. The associations between percentage of starch in fresh tubers and the percentage of starch in tuber dry matter, between percentage of starch in AIS and the percentage of starch in tuber dry matter and between percentage of protein in fresh tubers and the percentage of protein in tuber dry matter were also found to be significant and positive.To increase tuber yield it is necessary to break the negative linkage between its two components. High total tuber dry matter per plant can be brought about by selecting for high tuber yield. For the improvement of tuber quality together with tuber yield, the selection for yield based on a large number of tubers is likely to be useful.


2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Lakew Getaneh ◽  
Fanuel Laekemariam

Fertilizer requirement and spacing vary across locations due to differences in soil types, nutrient and moisture availability, economic factors, and other environmental conditions. Therefore, a field experiment was carried out to investigate the effect of different rates of NPS fertilizers and inter-row spacing on growth, yield, yield components, and economic performance of potato in Kechi research farm, Dawro zone of south-western Ethiopia. The experiment was arranged in factorial combination of six NPS (19N–38P2O5–7S) fertilizer rates (0 kg/ha, 50 kg/ha, 100 kg/ha, 150 kg/ha, 200 kg/ha, and 250 kg/ha) and five inter-row spacings (45, 55, 65, 75, and 85 cm) which were laid out in RCBD with three replications using the Gudene variety. Growth, yield component, and yield data were collected and analyzed. In addition, a partial budget analysis was performed. The results showed that the main effect of NPS fertilizer and inter-row spacing had significantly ( P < 0.05 ) affected plant height, tuber number, tuber yield, and tuber size and average tuber weight. Maximum marketable tuber number per plant (11.627), total tuber number per plant (13.020), average tuber weight per plant (83.493 g), the proportion of large-sized tuber number per plant (41.893%), marketable tuber yield (48.056 t/ha), and total tuber yield (51.145 t/ha) were obtained from 200 kg/ha of NPS fertilizer which was statistically at par with 150 kg/ha and 250 kg/ha NPS, while the lowest result for those parameters was recorded from unfertilized plots. Results regarding inter-row spacing revealed that the highest marketable tuber number per plant (11.744), total tuber number per plant (13.144), and average tuber weight per plant (85.559 g) were recorded at 75 cm, while the lowest result for these parameters was recorded at 45 cm. Moreover, the highest marketable tuber yield (45.084 t/ha) and total tuber yield (48.462 t/ha) were obtained from the inter-row spacing of 65 cm which was statistically at par with 55 cm inter-row spacing, while the lowest result for these parameters was recorded at 85 cm. The partial budget analysis further revealed that 200 kg/ha NPS fertilizer gave the maximum net benefit. However, 150 kg/ha NPS resulted in the highest marginal rate of return (4303.91%). Thus, 150 kg/ha NPS fertilizer and inter-row spacing of 55 cm or 65 cm are suggested for attaining higher potato yield.


2017 ◽  
Vol 9 (1) ◽  
pp. 206-210 ◽  
Author(s):  
Santosh Khadakabhavi ◽  
G. Girish ◽  
Yashoda Yashoda

The field experiment was carried out using 121 germplasm lines of rabi sorghum to study association among the yield and its component traits, direct and indirect effects of traits on the yield. Association studies indicat-ed that at both genotypic and phenotypic levels, panicle width (rg=0.190; rp=0.204) and 1000 grain weight (rg=0.450; rp=0.520) showed significantly positive correlation with grain yield per plant. Genotypic correlation magnitude was higher than phenotypic correlation. Partitioning of yield and yield components both at phenotypic and genotypic levels into direct and indirect effects revealed that the characters that had positive direct effects on grain yield were 1000 grain weight (Ppi=+0.3085, Pgi=+0.4621), panicle length (Ppi=+0.1516, Pgi=+0.2843), days to maturity (Ppi=+0.1539, Pgi=+0.1391) at both genotypic and phenotypic level. On grain yield indicating importance of these characters hence, due consideration should be given to these characters while planning a breeding strategy by utilizing rabisorghum.


2021 ◽  
Vol 50 (3) ◽  
pp. 699-709
Author(s):  
AYE MYINT KHIN ◽  
MOHD DIN AMIRUDDIN ◽  
MOHD Y. RAFII ◽  
MOHD YUSOFF ABD SAMAD ◽  
SHAIRUL IZAN RAMLEE ◽  
...  

Phenotypic associations among yield-related traits and the pattern of influence in crops are useful in evaluating, planning and selection criteria for the desirable traits. This research aimed to evaluate linear correlations and estimate the direct and indirect effects among morphological traits on oil yield of MPOB-Senegal germplasm. Data were collected annually for successive eight years (2000 to 2007) and was estimated for the phenotypic correlations, and decomposition into direct and indirect effects using path coefficient analysis. The result of the correlation and path coefficient analysis showed significant highly positive relations between some yield components and oil yield. Oil to wet mesocarp (OTWM) and bunch number (BNO) had high positive direct effect on oil yield while fresh fruit bunch (FFB), oil to fiber (OTF), fruit to bunch (FTB), and average bunch weight (ABWT) showed indirect effect on oil yield. In improvement of palm oil yield, traits that show high direct and/or indirect effect on oil yield should be considered. Hence, FFB, OTF, FTB, OTWM, and ABWT have maximum direct and indirect effect can be used effectively for the improvement of the palm oil yield of the MPOB-Senegal oil palm germplasm.


2014 ◽  
Vol 36 (4) ◽  
pp. 971-979
Author(s):  
Rosana Gonçalves Pires Matias ◽  
Claudio Horst Bruckner ◽  
Pedro Crescêncio Souza Carneiro ◽  
Danielle Fabíola Pereira Silva ◽  
José Osmar da Costa e Silva

This study aimed to determine the number of measurements necessary to evaluate physical and chemical characteristics of peach fruits, study the relationships between them and their direct and indirect effects on the content of ascorbic acid and total carotenoids. The characteristics skin and pulp color, fruit weight, suture, equatorial and polar diameters, firmness, soluble solids (SS), titratable acidity (TA), SS/TA ratio, ascorbic acid and total carotenoids were evaluated in 39 cultivars of peach and 3 cultivars of nectarine from the orchard of the Universidade Federal de Viçosa. The repeatability coefficient was estimated by ANOVA and CPCOR. Phenotypic correlation coefficients (rf) were estimated and, after the multicollinearity diagnostics, they were unfolded to direct and indirect effects of the explanatory variables on the response variable using path analysis. There was agreement on the magnitude of repeatability coefficients obtained by the two methods; however, they varied among the 14 characteristics. The highest correlations were found between FW, SD, ED and PD. Seven fruits are sufficient to evaluate the physical and chemical characteristics of peach with a correlation coefficient of 90%. The characteristics considered in the path diagrams (b* skin, hº skin, b* pulp, hº pulp, ED, PD, FIR, SS, SS/AT and TC) are not the main determinants of the ascorbic acid. The yellow hue of the pulp (hº pulp) has the potential to be used in indirect selection for total carotenoids.


2018 ◽  
Vol 36 (2) ◽  
pp. 265-270
Author(s):  
Giovani O Silva ◽  
Arione S Pereira ◽  
Fernanda Q Azevedo ◽  
Agnaldo DF Carvalho

ABSTRACT Potato genotypes were evaluated in their performance, according to the genotype values for tuber yield traits. The experiments were carried out in Canoinhas and Pelotas, Brazil, in spring 2014. Eleven advanced clones and two commercial cultivars (Agata and Asterix) (check cultivars) were evaluated. A randomized complete block design with four replicates was used. Plots were harvested 110 days after planting, and evaluated for tuber yield components. The data were submitted to joint deviance analyzes using the REML/BLUP method. Clones F102-22-07 and F32-02-06 stood out positively for tuber yield. F102-22-07 showed high marketable tuber yield and average tuber weight, while clone F32-02-06 exhibited high marketable and total tuber yield. The superiority of these advanced clones in relation to the check cultivars, suggests their potential to be evaluated in other environments, aiming their release as new cultivars.


Sign in / Sign up

Export Citation Format

Share Document