Finite Element Model to Predict the Bioconversion Rate of Glucose to Fructose using Escherichia coli K12 for Sugar Production from Date

2015 ◽  
Vol 11 (1) ◽  
pp. 105-113 ◽  
Author(s):  
Maher Trigui ◽  
Karim Gabsi ◽  
Walid Zneti ◽  
Suzelle Barrington ◽  
Ahmed Noureddine Helal
Keyword(s):  
Escherichia Coli ◽  
Induction Time ◽  
Volume Fraction ◽  
Element Model ◽  
Initial Concentration ◽  
Computational Fluids Dynamics ◽  
Date Syrup ◽  
Computational Fluids ◽  
Two Phases ◽  
Inoculum Volume

Abstract In this study, Bioconversion process of glucose to fructose from date syrup using Escherichia coli K12 is modeled using a commercial computational fluids dynamics (CFD) code fluent FLUENT 6.3.23 [8] which we implemented a user-defined functions (UDF) to simulate the interrelationships at play between various phases. A two phases CFD model was developed using an Eulerian – Eulerian approach to calculate the fructose volume fraction produced during time. The bioconversion process was studied as function of three initial concentration of glucose (0.14, 0.242 and 0.463gL–1), three induction time (60, 120 and 180 mn) and three inoculum volume (100, 120 and 150mL). The numerical results are compared with experimental data for bioconversion rate and show good agreement (R2= 0.894). The optimal condition of diffusion was obtained by applying an initial concentration of glucose less than 0.2gL–1 and induction time great than 100 minutes.

The stabilization of B.C.C. Cu in Cu/Nb nanolayered composites

1996 ◽  
Vol 54 ◽  
pp. 228-229
Author(s):  
H. Kung ◽  
A.J. Griffin ◽  
Y.C. Lu ◽  
K.E. Sickafus ◽  
T.E. Mitchell ◽  
...  
Keyword(s):  
Electrical Resistivity ◽  
Layer Thickness ◽  
Volume Fraction ◽  
Ion Beam ◽  
High Strength ◽  
Cross Sectional ◽  
Metastable Structure ◽  
High Resolution Tem ◽  
Potential Improvement ◽  
Two Phases

Materials with compositionally modulated structures have gained much attention recently due to potential improvement in electrical, magnetic and mechanical properties. Specifically, Cu-Nb laminate systems have been extensively studied mainly due to the combination of high strength, and superior thermal and electrical conductivity that can be obtained and optimized for the different applications. The effect of layer thickness on the hardness, residual stress and electrical resistivity has been investigated. In general, increases in hardness and electrical resistivity have been observed with decreasing layer thickness. In addition, reduction in structural scale has caused the formation of a metastable structure which exhibits uniquely different properties. In this study, we report the formation of b.c.c. Cu in highly textured Cu/Nb nanolayers. A series of Cu/Nb nanolayered films, with alternating Cu and Nb layers, were prepared by dc magnetron sputtering onto Si {100} wafers. The nominal total thickness of each layered film was 1 μm. The layer thickness was varied between 1 nm and 500 nm with the volume fraction of the two phases kept constant at 50%. The deposition rates and film densities were determined through a combination of profilometry and ion beam analysis techniques. Cross-sectional transmission electron microscopy (XTEM) was used to examine the structure, phase and grain size distribution of the as-sputtered films. A JEOL 3000F high resolution TEM was used to characterize the microstructure.

Direct imaging of order-disorder and antiphase domain structures in Ti3Al intermetallic compound

1990 ◽  
Vol 48 (4) ◽  
pp. 480-481
Author(s):  
H. Q. Ye ◽  
T.S. Xie ◽  
D. Li
Keyword(s):  
Intermetallic Compound ◽  
Volume Fraction ◽  
Fundamental Problem ◽  
Antiphase Domain ◽  
Atomic Scale ◽  
Orientation Relationships ◽  
Domain Structures ◽  
Α Phase ◽  
Diffraction Patterns ◽  
Two Phases

The Ti3Al intermetallic compound has long been recognized as potentially useful structural materials. It offers attractive strength to weight and elastic modulus to weight ratios. Recent work has established that the addition of Nb to Ti3Al ductilized this compound. In this work the fundamental problem of this alloy, i.e. order-disorder and antiphase domain structures was investigated at the atomic scale.The Ti3Al+10at%Nb alloys used in this study were treated at 1060°C and then aged at 700°C for 2 hours. The specimens suitable for TEM were prepared by standard jet electrolytic-polishing technique. A JEM-200CX electron microscope with an interpretable resolution of about 0.25 nm was used for HREM.The [100] and [001] projections of the α2 phase were shown in Fig.l.The alloy obtained consist of at least two phases-α2(Ti3Al) and β0 structures. Moreover, a disorder α phase with small volume fraction was also observed. Fig.2 gives [100] and [001] diffraction patterns of the α2 phase. Since lattice parameters of the ordered α2 (a=0.579, c=0.466 nm) and disorder α phase (a0=0.294≈a/2, c0=0.468 nm) are almost the same, their diffraction patterns are difficult to be distinguished when they are overlapped with epitaxial orientation relationships.

Effect of Ferrite Volume Fraction on Mechanical Properties of X80 Pipeline Steel

2014 ◽  
Vol 989-994 ◽  
pp. 212-215
Author(s):  
J. Liu ◽  
G. Zhu ◽  
W. Mao
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Work Hardening ◽  
Single Phase ◽  
Volume Fraction ◽  
Pipeline Steel ◽  
X80 Pipeline Steel ◽  
Hardening Behavior ◽  
Two Phases ◽  
Better Than

The effect of volume fraction of ferrite on the mechanical properties including strength, plasticity and wok hardening was systematically investigated in X80 pipeline steel in order to improve the plasticity. The microstructures with different volume fraction of ferrite and bainite were obtained by heat-treatment processing and the mechanical properties were tested. The work hardening behavior was analyzed by C-J method. The results show that the small amount of ferrite could effectively improve the plasticity. The work hardening ability and the ratio of yield/tensile strength with two phases of ferrite/bainite would be obviously better than that with single phase of bainite. The improvement of plasticity could be attributed to the ferrite in which more plastic deformation was afforded.

Micromechanical analysis of effective mechanical properties of graphene/ZrO2-hybrid poly (methyl methacrylate) nanocomposites

2021 ◽  
pp. 251659842110388
Author(s):  
Ankit Rathi ◽  
S. I. Kundalwal
Keyword(s):  
Methyl Methacrylate ◽  
Elastic Properties ◽  
Mechanical Performance ◽  
Volume Fraction ◽  
Element Model ◽  
Two Phase ◽  
Effective Elastic Properties ◽  
Poly Methyl Methacrylate ◽  
Three Phase ◽  
Effective Mechanical Properties

In this study, the tensile properties of two-phase and three-phase graphene/ZrO2-hybrid poly (methyl methacrylate) (PMMA) nanocomposites are investigated by developing finite element model using ANSYS. Primarily, the effective elastic properties of two- and three-phase graphene/ZrO2-hybrid PMMA nanocomposites (GRPCs) are estimated by developing mechanics of material (MOM) model. Results indicated that the effective elastic properties of GRPCs increase with an increase in the volume fraction of graphene. Also, the stiffness of GRPCs is increased by 78.12% with increasing in the volume fraction of graphene from 0.1 to 0.5 Vf. The incorporation of an additional ZrO2 interphase significantly improved the mechanical performance of resulting GRPCs.

Transformation Textures in Unstable Austenitic Steel

2002 ◽  
Vol 125 (1) ◽  
pp. 12-17 ◽  
Author(s):  
R. Kubler ◽  
M. Berveiller ◽  
M. Cherkaoui ◽  
K. Inal
Keyword(s):  
Martensitic Transformation ◽  
Volume Fraction ◽  
Micromechanical Model ◽  
Slip Rate ◽  
Transformation Strain ◽  
Dislocation Motion ◽  
Lattice Spin ◽  
Two Phases ◽  
The One ◽  
Elastic Plastic Materials

During the martensitic transformation in elastic-plastic materials, the local transformation strain as well as the plastic flow inside austenite are strongly related with the crystallographic orientation of the austenitic lattice. Two mechanisms involved in these materials, i.e., plasticity by dislocation motion and martensitic phase formation are coupled through kinematical constraints so that the lattice spin of the austenitic grains is different from the one due to classical slip. In this work, the lattice spin ω˙eA of the austenitic grains is related with the slip rate on the slip systems of the two phases, γ˙A and γ˙M, the evolution of the martensite volume fraction f˙ and the overall rotation rate Ω˙ of the grains. This new relation is integrated in a micromechanical model developed for unstable austenite in order to predict the evolution of the austenite texture during TRansformation Induced Plasticity (TRIP). Results for the evolution of the lattice orientation during martensitic transformation are compared with experimental data obtained by X-ray diffraction on a 304 AISI steel.

Design and Testing of Innovative Rotational Mould Heated by Thermal Fluid

2010 ◽  
Author(s):  
M. D. Monzo´n ◽  
A. N. Beni´tez ◽  
P. Bordo´n ◽  
P. M. Herna´ndez ◽  
M. D. Marrero ◽  
...  
Keyword(s):  
Cycle Time ◽  
Energetic Efficiency ◽  
Internal Stresses ◽  
Cycle Times ◽  
Transfer Processes ◽  
Computational Fluids Dynamics ◽  
Heating And Cooling ◽  
Computational Fluids ◽  
Plastic Parts ◽  
Design And Testing

Rotomoulded plastic parts have no internal stresses, as it is a process carried out at lower temperatures than injection moulding and no pressure is applied. The main disadvantage is the high cycle times needed. This paper focuses on reducing this cycle time and in producing a mould using standardized parts. For cycle time reducing, it is proposed to heat the mould by thermal fluid in continuous circulation; heat transfer processes have been studied for over 20 different configurations of the oil’s inlet – outlet, obtaining acceptable results with a manifold with 25 perforations in the front and rear faces. This configuration has been optimized by computational fluids dynamics, allowing reducing heating and cooling time and improving the energetic efficiency and the uniformity of heating. Design, simulations and testing of a 100 mm3 cube have been carried out in order to produce a standardized mould; this mould consists in some standardized parts and a nickel shell, obtained by rapid prototyping and electroforming process. This shell can be removed from the rest of elements in the mould, allowing thus to obtain parts with any other geometry just by changing the nickel shell. An experimental machine for testing has been developed as well.

The Relationship of Normal and Abnormal Microstructural Proliferation to the Mitral Valve Closure Sound

2005 ◽  
Vol 127 (1) ◽  
pp. 134-147 ◽  
Author(s):  
Daniel R. Einstein ◽  
Karyn S. Kunzelman ◽  
Per G. Reinhall ◽  
Mark A. Nicosia ◽  
Richard P. Cochran
Keyword(s):  
Mitral Valve ◽  
Volume Fraction ◽  
Contrast Material ◽  
Element Model ◽  
Peak Frequency ◽  
Material Behavior ◽  
Small Scale ◽  
Valve Closure ◽  
Valvular Function ◽  
The Relationship

Background : Many diseases that affect the mitral valve are accompanied by the proliferation or degradation of tissue microstructure. The early acoustic detection of these changes may lead to the better management of mitral valve disease. In this study, we examine the nonstationary acoustic effects of perturbing material parameters that characterize mitral valve tissue in terms of its microstructural components. Specifically, we examine the influence of the volume fraction, stiffness and splay of collagen fibers as well as the stiffness of the nonlinear matrix in which they are embedded. Methods and Results: To model the transient vibrations of the mitral valve apparatus bathed in a blood medium, we have constructed a dynamic nonlinear fluid-coupled finite element model of the valve leaflets and chordae tendinae. The material behavior for the leaflets is based on an experimentally derived structural constitutive equation. The gross movement and small-scale acoustic vibrations of the valvular structures result from the application of physiologic pressure loads. Material changes that preserved the anisotropy of the valve leaflets were found to preserve valvular function. By contrast, material changes that altered the anisotropy of the valve were found to profoundly alter valvular function. These changes were manifest in the acoustic signatures of the valve closure sounds. Abnormally, stiffened valves closed more slowly and were accompanied by lower peak frequencies. Conclusion: The relationship between stiffness and frequency, though never documented in a native mitral valve, has been an axiom of heart sounds research. We find that the relationship is more subtle and that increases in stiffness may lead to either increases or decreases in peak frequency depending on their relationship to valvular function.

Resin Infusion of Triaxially Braided Preforms With Through-the-Thickness Reinforcement

2001 ◽  
Author(s):  
Jay R. Sayre ◽  
Alfred C. Loos
Keyword(s):  
Composite Structures ◽  
High Performance ◽  
Volume Fraction ◽  
Three Dimensional ◽  
Element Model ◽  
Manufacturing Cost ◽  
Fiber Volume ◽  
Resin Infusion ◽  
Infiltration Process ◽  
High Fiber

Abstract Vacuum assisted resin transfer molding (VARTM) has shown potential to significantly reduce the manufacturing cost of high-performance aerospace composite structures. In this investigation, high fiber volume fraction, triaxially braided preforms with through-the-thickness stitching were successfully resin infiltrated by the VARTM process. The preforms, resin infiltrated with three different resin systems, produced cured composites that were fully wet-out and void free. A three-dimensional finite element model was used to simulation resin infusion into the preforms. The predicted flow patterns agreed well with the flow pattern observed during the infiltration process. The total infiltration times calculated using the model compared well with the measured times.

scholarly journals SIMULASI DISTRIBUSI TEMPERATUR DAN KELEMBABAN RELATIF RUANGAN DARI SISTEM DEHUMIDIFIKASI MENGGUNAKAN COMPUTATIONAL FLUIDS DYNAMICS (CFD)

ROTASI ◽  
2017 ◽  
Vol 19 (1) ◽  
pp. 1
Author(s):  
Eflita Yohana ◽  
Bambang Yunianto ◽  
Ade Eva Diana
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flow Simulation ◽  
Liquid Desiccant ◽  
Humidity Ratio ◽  
Computational Fluids Dynamics ◽  
Computational Fluids ◽  
Computational Fluid Dynamics Cfd

Dehumidifikasi merupakan proses pengurangan kadar uap air  yang berpengaruh terhadap besar nilai kelembaban relatif dan temperatur suatu ruangan. Dalam mengkondisikan kadar uap air dalam suatu ruangan tersebut agar dapat sesuai dengan kebutuhan, maka perlu diketahui distribusi kelembaban relatif dan temperatur dalam ruangan menggunakan Computational Fluid Dynamics (CFD). Pada penelitian ini, pengambilan data dilakukan selama 20 menit dan dilakukan pada pukul 08.00 WIB.  Liquid desiccant yang digunakan dijaga pada temperatur 10°C dengan variasi konsentrasi 40% dan 50%. Sensor DHT 11 dipasang pada lima sisi, atap, dinding, lantai, inlet, outlet, yang berfungsi untuk mencatat perubahan kelembaban dan temperatur selama pengujian berlangsung. Pada kondisi normal tanpa menyalakan alat dehumidifier, sensor mencatat temperatur rata-rata di dalam ruangan sebesar 29,9°C dan RH 58,9%. Simulasi dilakukan menggunakan software CFD Solidworks Flow Simulation 2014. Validasi hasil eksperimen dengan hasil simulasi dengan membandingan bahwa liquid desiccant 40% dan 50%, nozzle sprayer 0.2 mm dengan temperatur yang dijaga pada 10°C mempunyai distribusi yang cukup merata dengan konsentrasi 40% memiliki nilai RH terendah sebesar 65,21%, nilai RH tertinggi sebesar 68,99%, nilai ω = 18 gr/kg, serta mempunyai temperatur tertinggi 31,11°C dan temperatur terendah 30,05°C. Sedangkan dengan konsentrasi 50% distribusi dalam ruangan juga cukup merata karena memiliki nilai RH terendah sebesar 59,21%., nilai RH tertinggi sebesar 62,80%, nilai ω = 17 gr/kg, serta mempunyai temperatur tertinggi 31,71°C dan temperatur terendah 30,93°C. Sehingga liquid desiccant dengan konsentrasi 50% mempunyai nilai Humidity Ratio (ω) lebih rendah dibandingkan dengan yang memiliki konsentrasi 40%.

scholarly journals Microstructural Modeling and Strengthening Mechanism of TiB/Ti-6Al-4V Discontinuously-Reinforced Titanium Matrix Composite

Materials ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 827 ◽  
Author(s):  
Shuai Zhao ◽  
Yangjian Xu ◽  
Changliang Pan ◽  
Lihua Liang ◽  
Xiaogui Wang
Keyword(s):  
Finite Element ◽  
Matrix Composite ◽  
Distribution Density ◽  
Volume Fraction ◽  
Element Model ◽  
Titanium Matrix ◽  
Titanium Matrix Composite ◽  
Finite Element Software ◽  
Multiple User ◽  
Thiessen Polygon

A novel modeling method was proposed to provide an improved representation of the actual microstructure of TiB/Ti-6Al-4V discontinuously-reinforced titanium matrix composite (DRTMC). Based on the Thiessen polygon structure, the representative volume element (RVE) containing the complex microstructures of the DRTMC was first generated. Thereafter, by using multiple user-defined subroutines in the commercial finite element software ABAQUS, the application of asymmetric mesh periodic boundary conditions on the RVE was realized, and the equivalent elastic modulus of the DRTMC was determined according to the homogenization method. Through error analyses on the experimental and calculated results regarding the equivalent elastic parameters of the DRTMC, the rationality of generating the DRTMC finite element model by using the present method was validated. Finally, simulations based on four types of network-like models revealed that the present simplifications to the particle shape of the reinforcement phase had less of an influence on the overall composite strength. Moreover, the present study demonstrates that the DRTMC enhancement is mainly attributed to the matrix strengthening, rather than the load-transferring mechanism. The strengthening influences of the distribution forms of the reinforcement phases, including their distribution density and orientation, were studied further. It was found that both the higher distribution density and limited distribution orientation of the particles would increase the probability of overlapping and merging between particles, and; therefore, higher strength could be yielded when the volume fraction of the reinforcement phase reached a certain threshold. Owing to the versatility of the developed methods and programs, this work can provide a useful reference for the characterization of the mechanical properties of other composites types.

Sign in / Sign up

Export Citation Format

Share Document