Numerical Simulation for Radiated Flow in Rotating Channel with Homogeneous-Heterogeneous Reactions

2019 ◽  
Vol 44 (4) ◽  
pp. 355-362 ◽  
Author(s):  
Tasawar Hayat ◽  
Ikram Ullah ◽  
Ahmed Alsaedi ◽  
Hamed Alsulami

Abstract The present work models MHD three-dimensional flow in a rotating channel. The energy expression is characterized by heat generation/absorption and radiation effects. Homogeneous-heterogeneous features are also accounted for. The obtained non-dimensional systems are numerically computed via the NDSolve based Shooting technique. Graphs are plotted to visualize the impact of various influential variables on velocity, temperature and concentration. In addition, skin friction and the Nusselt number are numerically estimated. Here temperature increases for increasing estimations of heat generation/absorption and radiation parameters. Furthermore, skin friction is reduced in the case of large Reynold number and rotation parameter.

2017 ◽  
Author(s):  
Daniel R. Moon ◽  
Giorgio S. Taverna ◽  
Clara Anduix-Canto ◽  
Trevor Ingham ◽  
Martyn P. Chipperfield ◽  
...  

Abstract. One geoengineering mitigation strategy for global temperature rises resulting from the increased concentrations of greenhouse gases is to inject particles into the stratosphere to scatter solar radiation back to space, with TiO2 particles emerging as a possible candidate. Uptake coefficients of HO2, γ(HO2), onto sub-micrometre TiO2 particles were measured at room temperature and different relative humidities (RH) using an atmospheric pressure aerosol flow tube coupled to a sensitive HO2 detector. Values of γ(HO2) increased from 0.021 ± 0.001 to 0.036 ± 0.007 as the RH was increased from 11 % to 66 %, and the increase in γ(HO2) correlated with the number of monolayers of water surrounding the TiO2 particles. The impact of the uptake of HO2 onto TiO2 particles on stratospheric concentrations of HO2 and O3 was simulated using the TOMCAT three-dimensional chemical transport model. The model showed that by injecting the amount of TiO2 required to achieve the same cooling effect as the Mt. Pinatubo eruption, heterogeneous reactions between HO2 and TiO2 would have a negligible effect on stratospheric concentrations of HO2 and O3.


2019 ◽  
Vol 97 (12) ◽  
pp. 1262-1269 ◽  
Author(s):  
Azad Hussain ◽  
Fouzia Javed ◽  
M.Y. Malik ◽  
Sumaira Ameer

In the present article, the influence of heat generation on the magnetohydrodynamic (MHD) flow of an Eyring–Powell fluid along a permeable plate has been explored. The influence of heat generation or absorption on a steady flow of non-Newtonian fluid over a surface is investigated. The governing equations obtained from Eyring–Powell fluid model are transubstantiated into ordinary differential equations using suitable transformations. Along with the Runge–Kutta method, we attained a numerical solution of the present problem by explicating the shooting technique. Influences of distinct parameters on temperature and the velocity field profiles are highlighted in graphs and tables. The acceleration in the value of γ, velocity profile shows decreasing behavior, but recovery occurs with an increase in M. The streamlines and three-dimensional results have been shown graphically for a selection of different parameters. Numerical results of the present work have been discussed with the support of tables.


2013 ◽  
Vol 457-458 ◽  
pp. 350-353
Author(s):  
Fofana Gaoussou Hadia ◽  
You Tong Zhang

In this paper, we propose a three-dimensional analytical model based on Greens Function to investigate the Impact of temperature rising on simple lithium-ion batteries and control the heat generation during charge/discharge of battery operation. The modeling is based on heat-transform mechanism analysis method that gives a closed-form solution for the fundamental problem of heat conduction in battery cores with orthotropic thermal conductivities. The method uses a simple lithium-ion battery examined, considered the ambient temperature and initial temperature as 25°C, subjected to transient heat generation in various convective cooling boundary conditions at its surfaces.


2018 ◽  
Vol 18 (1) ◽  
pp. 327-338 ◽  
Author(s):  
Daniel R. Moon ◽  
Giorgio S. Taverna ◽  
Clara Anduix-Canto ◽  
Trevor Ingham ◽  
Martyn P. Chipperfield ◽  
...  

Abstract. One geoengineering mitigation strategy for global temperature rises resulting from the increased concentrations of greenhouse gases is to inject particles into the stratosphere to scatter solar radiation back to space, with TiO2 particles emerging as a possible candidate. Uptake coefficients of HO2, γ(HO2), onto sub-micrometre TiO2 particles were measured at room temperature and different relative humidities (RHs) using an atmospheric pressure aerosol flow tube coupled to a sensitive HO2 detector. Values of γ(HO2) increased from 0.021 ± 0.001 to 0.036 ± 0.007 as the RH was increased from 11 to 66 %, and the increase in γ(HO2) correlated with the number of monolayers of water surrounding the TiO2 particles. The impact of the uptake of HO2 onto TiO2 particles on stratospheric concentrations of HO2 and O3 was simulated using the TOMCAT three-dimensional chemical transport model. The model showed that, when injecting the amount of TiO2 required to achieve the same cooling effect as the Mt Pinatubo eruption, heterogeneous reactions between HO2 and TiO2 would have a negligible effect on stratospheric concentrations of HO2 and O3.


2002 ◽  
Vol 20 (6) ◽  
pp. 847-862
Author(s):  
B. Grassi ◽  
G. Redaelli ◽  
G. Visconti

Abstract. A three-dimensional (3-D) Chemical Transport Model (CTM) of the stratosphere has been developed and used for a test study of the evolution of chemical species in the arctic lower stratosphere during winter 1996/97. This particular winter has been chosen for testing the model’s capabilities for its remarkable dynamical situation (very cold and strong polar vortex) along with the availability of sparse chlorine, HNO3 and O3 data, showing also very low O3 values in late March/April. Due to those unusual features, the winter 1996/97 can be considered an excellent example of the impact of both dynamics and heterogeneous reactions on the chemistry of the stratosphere. Model integration has been performed from January to March 1997 and the resulting long-lived and short-lived tracer fields compared with available measurements. The model includes a detailed gas phase chemical scheme and a parameterization of the heterogeneous reactions occurring on liquid aerosol and polar stratospheric cloud (PSC) surfaces. The transport is calculated using a semi-lagrangian flux scheme, forced by meteorological analyses. In such form, the STRATAQ CTM model is suitable for short-term integrations to study transport and chemical evolution related to "real" meteorological situations. Model simulation during the chosen winter shows intense PSC formation, with noticeable local HNO3 capture by PSCs, and the activation of vortex air leading to chlorine production and subsequent O3 destruction. The resulting model fields show generally good agreement with satellite data (MLS and TOMS), although the available observations, due to their limited number and time/space sparse nature, are not enough to effectively constraint the model. In particular, the model seems to perform well in reproducing the rapid processing of air inside the polar vortex on PSC converting reservoir species in active chlorine. In addition, it satisfactorily reproduces the morphology of the continuous O3 decline as shown by the satellite during the investigated period, with a tendency, however, to underestimate the total column values inside the polar vortex during late winter. As possible causes of this model/observation difference we suggest an incorrect estimation of the vertical transport and of the tropospheric contribution.Key words. Atmospheric composition and structure (Middle atmosphere-composition and chemistry) Meterology and atmospheric dynamics (middle atmosphere dynamics)


Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 5133
Author(s):  
Azad Hussain ◽  
Mubashar Arshad ◽  
Aysha Rehman ◽  
Ali Hassan ◽  
S. K. Elagan ◽  
...  

This comparative study inspects the heat transfer characteristics of magnetohydrodynamic (MHD) nanofluid flow. The model employed is a two-phase fluid flow model. Water is utilized as the base fluid, and zinc and titanium oxide (Zn and TiO2) are used as two different types of nanoparticles. The rotation of nanofluid is considered along the z-axis, with velocity ω*. A similarity transformation is used to transform the leading structure of partial differential equations to ordinary differential equations. By using a powerful mathematical BVP-4C technique, numerical results are obtained. This study aims to describe the possessions of different constraints on temperature and velocity for rotating nanofluid with a magnetic effect. The outcomes for the rotating nanofluid flow and heat transference properties for both types of nanoparticles are highlighted with the help of graphs and tables. The impact of physical concentrations such as heat transference rates and coefficients of skin friction are examined. It is noted that rotation increases the heat flux and decreases skin friction. In this comparative study, Zn-water nanofluid was demonstrated to be a worthy heat transporter as compared to TiO2-water nanofluid.


2020 ◽  
Vol 20 (15) ◽  
pp. 9311-9329
Author(s):  
Wei Sun ◽  
Zhiquan Liu ◽  
Dan Chen ◽  
Pusheng Zhao ◽  
Min Chen

Abstract. To improve the operational air quality forecasting over China, a new aerosol or gas-phase pollutants assimilation capability is developed within the WRFDA system using the three-dimensional variational (3DVAR) algorithm. In this first application, the interface for the MOSAIC (Model for Simulating Aerosol Interactions and Chemistry) aerosol scheme is built with the potential for flexible extension. Based on the new WRFDA-Chem system, five experiments assimilating different surface observations, including PM2.5, PM10, SO2, NO2, O3, and CO, are conducted for January 2017 along with a control experiment without data assimilation (DA). Results show that the WRFDA-Chem system evidently improves the air quality forecasting. From the analysis aspect, the assimilation of surface observations reduces the bias and RMSE in the initial condition (IC) remarkably; from the forecast aspect, better forecast performances are acquired up to 24 h, in which the experiment assimilating the six pollutants simultaneously displays the best forecast skill overall. With respect to the impact of the DA cycling frequency, the responses toward IC updating are found to be different among the pollutants. For PM2.5, PM10, SO2, and CO, the forecast skills increase with the DA frequency. For O3, although improvements are acquired at the 6 h cycling frequency, the advantage of more frequent DA could be consumed by the disadvantages of the unbalanced photochemistry (due to inaccurate precursor NOx ∕ VOC (volatile organic compound) ratios) or the changed titration process (due to changed NO2 concentrations but not NO) from assimilating the existing observations (only O3 and NO2, but no VOC and NO). As yet the finding is based on the 00:00 UTC forecast for this winter season only, and O3 has strong diurnal and seasonal variations. More experiments should be conducted to draw further conclusions. In addition, considering one aspect (IC) in the model is corrected by DA, the deficiencies of other aspects (e.g., chemical reactions) could be more evident. This study explores the model deficiencies by investigating the effects of assimilating gaseous precursors on the forecast of related aerosols. Results show that the parameterization (uptake coefficients) in the newly added sulfate–nitrate–ammonium (SNA)-relevant heterogeneous reactions in the model is not fully appropriate although it best simulates observed SNA aerosols without DA; since the uptake coefficients were originally tuned under the inaccurate gaseous precursor scenarios without DA, the biases from the two aspects (SNA reactions and IC DA) were just compensated. In future chemistry development, parameterizations (such as uptake coefficients) for different gaseous precursor scenarios should be adjusted and verified with the help of the DA technique. According to these results, DA ameliorates certain aspects by using observations as constraints and thus provides an opportunity to identify and diagnose the model deficiencies; it is useful especially when the uncertainties of various aspects are mixed up and the reaction paths are not clearly revealed. In the future, besides being used to improve the forecast through updating IC, DA could be treated as another approach to explore necessary developments in the model.


Author(s):  
Halit Dogan ◽  
Md Mahbub Alam ◽  
Navid Asadizanjani ◽  
Sina Shahbazmohamadi ◽  
Domenic Forte ◽  
...  

Abstract X-ray tomography is a promising technique that can provide micron level, internal structure, and three dimensional (3D) information of an integrated circuit (IC) component without the need for serial sectioning or decapsulation. This is especially useful for counterfeit IC detection as demonstrated by recent work. Although the components remain physically intact during tomography, the effect of radiation on the electrical functionality is not yet fully investigated. In this paper we analyze the impact of X-ray tomography on the reliability of ICs with different fabrication technologies. We perform a 3D imaging using an advanced X-ray machine on Intel flash memories, Macronix flash memories, Xilinx Spartan 3 and Spartan 6 FPGAs. Electrical functionalities are then tested in a systematic procedure after each round of tomography to estimate the impact of X-ray on Flash erase time, read margin, and program operation, and the frequencies of ring oscillators in the FPGAs. A major finding is that erase times for flash memories of older technology are significantly degraded when exposed to tomography, eventually resulting in failure. However, the flash and Xilinx FPGAs of newer technologies seem less sensitive to tomography, as only minor degradations are observed. Further, we did not identify permanent failures for any chips in the time needed to perform tomography for counterfeit detection (approximately 2 hours).


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Cui Wang ◽  
Ling Cai ◽  
Yaojian Wu ◽  
Yurong Ouyang

AbstractIntegrated renovation projects are important for marine ecological environment protection. Three-dimensional hydrodynamics and water quality models are developed for the Maowei Sea to assess the hydrodynamic environment base on the MIKE3 software with high resolution meshes. The results showed that the flow velocity changed minimally after the project, decreasing by approximately 0.12 m/s in the east of the Maowei Sea area and increasing by approximately 0.01 m/s in the northeast of the Shajing Port. The decrease in tidal prism (~ 2.66 × 106 m3) was attributed to land reclamation, and accounted for just 0.86% of the pre-project level. The water exchange half-life increased by approximately 1 day, implying a slightly reduced water exchange capacity. Siltation occurred mainly in the reclamation and dredging areas, amounting to back-silting of approximately 2 cm/year. Reclamation project is the main factor causing the decrease of tidal volume and weakening the hydrodynamics in Maowei Sea. Adaptive management is necessary for such a comprehensive regulation project. According to the result, we suggest that reclamation works should strictly prohibit and dredging schemes should optimize in the subsequent regulation works.


Minerals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 213
Author(s):  
Hamid Ait Said ◽  
Hassan Noukrati ◽  
Hicham Ben Youcef ◽  
Ayoub Bayoussef ◽  
Hassane Oudadesse ◽  
...  

Three-dimensional hydroxyapatite-chitosan (HA-CS) composites were formulated via solid-liquid technic and freeze-drying. The prepared composites had an apatitic nature, which was demonstrated by X-ray diffraction and Infrared spectroscopy analyses. The impact of the solid/liquid (S/L) ratio and the content and the molecular weight of the polymer on the composite mechanical strength was investigated. An increase in the S/L ratio from 0.5 to 1 resulted in an increase in the compressive strength for HA-CSL (CS low molecular weight: CSL) from 0.08 ± 0.02 to 1.95 ± 0.39 MPa and from 0.3 ± 0.06 to 2.40 ± 0.51 MPa for the HA-CSM (CS medium molecular weight: CSM). Moreover, the increase in the amount (1 to 5 wt%) and the molecular weight of the polymer increased the mechanical strength of the composite. The highest compressive strength value (up to 2.40 ± 0.51 MPa) was obtained for HA-CSM (5 wt% of CS) formulated at an S/L of 1. The dissolution tests of the HA-CS composites confirmed their cohesion and mechanical stability in an aqueous solution. Both polymer and apatite are assumed to work together, giving the synergism needed to make effective cylindrical composites, and could serve as a promising candidate for bone repair in the orthopedic field.


Sign in / Sign up

Export Citation Format

Share Document