scholarly journals Embedded three spinel ferrite nanoparticles in PES-based nano filtration membranes with enhanced separation properties

2021 ◽  
Vol 45 (1) ◽  
pp. 1-10
Author(s):  
Davood Ghanbari ◽  
Samaneh BandehAli ◽  
Abdolreza Moghadassi
Keyword(s):  
Metal Removal ◽  
Membrane Surface ◽  
Pure Water ◽  
Spinel Ferrite ◽  
Heavy Metal Removal ◽  
Water Flux ◽  
Ferrite Nanoparticles ◽  
X Ray Diffraction ◽  
Filtration Membranes ◽  
Pes Membrane

Abstract In this study, three types of ferrites nanoparticles including CoFe2O4, NiFe2O4, and ZnFe2O4 were synthesized by microwave-assisted hydrothermal method. The X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), and field emission scanning electron microscopy (FESEM) were employed to analyze synthesized nanoparticles and fabricated membranes. The morphology of membrane surface was investigated by surface images. The ability of ferrite nanoparticles was evaluated to the separation of sodium salt and heavy metals such as Cr2+, Pb2+, and Cu2+ from aqueous solutions. The modified membrane showed the enhancement of membrane surface hydrophilicity, porosity, and mean pore size. The results revealed a significant increase in pure water flux: 152.27, 178, and 172.68 L·m−2·h−1 for PES/0.001 wt% of CoFe2O4, PES/0.001 wt% NiFe2O4, and PES/0.001 wt% ZnFe2O4 NPs, respectively. Moreover, Na2SO4 rejection was reached 78% at 0.1 wt% of CoFe2O4 NPs. The highest Cr (II) rejection obtained 72% for PES/0.001 wt% of NiFe2O4 NPs while it was 46% for the neat PES membrane. The Pb(II) rejection reached above 75% at 0.1 wt% of CoFe2O4 NPs. The Cu(II) rejection was obtained 75% at 0.1 wt% of CoFe2O4 NPs. The ferrite NPs revealed the high potential of heavy metal removal in the filtration membranes.

scholarly journals Synthesizing Ag/PDA/PES Antibacterial Membrane for Natural Organic Molecules Removal

2018 ◽  
Vol 65 ◽  
pp. 05023 ◽  
Author(s):  
Kok Poh Wai ◽  
Chai Hoon Koo ◽  
Yean Ling Pang ◽  
Woon Chan Chong ◽  
Woei Jye Lau
Keyword(s):  
Membrane Surface ◽  
Pure Water ◽  
Water Flux ◽  
X Ray Diffraction ◽  
X Ray ◽  
Membrane Performance ◽  
Dope Solution ◽  
And Performance ◽  
Pes Membrane ◽  
Contact Angle Analysis

Silver nanoparticles (NP) was successfully immobilized on polydopamine (PDA) supported polyethersulfone (PES) membrane via a redox reaction. Polyvinylpyrrolidone (PVP) was added into membrane dope solution as a pore-forming agent. Four pieces of membranes (M1, M2, M3 and M4) were fabricated with different active layer coatings to compare their morphological and performance properties. The differences between each sample were highlighted as follow: M1 (pristine PES), M2 (PES+PVP), M3 (PDA/PES+PVP) and M4 (Ag/PDA/PES+PVP). All membranes were characterized using scanning electron microscopy, energy dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, X-ray diffraction and contact angle analysis. The membrane performance was examined using pure water permeability (PWP) test, antibacterial test and humic acid (HA) rejection test. Pristine M1 membrane showed that PWP of 27.16 LMH/bar and HA rejection of 84 %. In this study, it was found that the addition of PVP as a pore agent into the membrane M2 increased water flux but slightly deteriorated HA rejection. Coating of PDA on M3 and immobilizing silver NP on M4 membrane surface have improved HA rejection but compromised PWP. The results showed that membrane M4 carried excellent antibacterial property and highest HA rejection among all fabricated membranes.

Preparation of Polyethersulfone Ultrafiltration Membrane Surface Coated with TiO2 Nanoparticles and Irradiated under UV Light

2013 ◽  
Vol 594-595 ◽  
pp. 877-881 ◽  
Author(s):  
Siti Hawa Mohamad ◽  
M.I. Idris ◽  
Hasan Zuhudi Abdullah
Keyword(s):  
Humic Acid ◽  
Uv Light ◽  
Membrane Surface ◽  
Pure Water ◽  
Water Flux ◽  
Dip Coating ◽  
Ultrafiltration Membrane ◽  
Inversion Method ◽  
Pes Membrane ◽  
Coated Membrane

This paper focuses on performance of polyethersulfone (PES) ultrafiltration membrane coated with titanium dioxide (TiO2) nanoparticles and irradiated with UV light. The flat sheet membrane was prepared via phase inversion method, with two types of membrane; TiO2 coated PES membrane and UV irradiated TiO2 coated PES membrane. TiO2 suspension with concentration of 0.01, 0.03 and 0.05 wt.% were prepared and coated on the PES surface via dip coating. Membrane was immersed in all suspension for 15 minutes and 30 minutes. Then, prepared coated membranes were irradiated by 184 Watts UV lamp for 15 minutes. The performance of membranes was examined by permeation of humic acid. The morphology of membranes was analyzed by scanning electron microscopy (SEM). It was revealed that the pure water flux and humic acid permeation of UV irradiated TiO2 coated membrane was higher than TiO2 coated membrane. It can be concluded that TiO2 coated with 0.03 wt.% of suspension, 30 minutes and 15 minutes UV irradiation with 184 Watt light were determined as the optimum conditions for preparation ultrafiltration PES membrane.

scholarly journals Synthesis, characterization and heavy metal removal efficiency of nickel ferrite nanoparticles (NFN’s)

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Waheed Ali Khoso ◽  
Noor Haleem ◽  
Muhammad Anwar Baig ◽  
Yousuf Jamal
Keyword(s):  
Heavy Metals ◽  
Nickel Ferrite ◽  
Contact Time ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Ferrite Nanoparticles ◽  
Batch Adsorption ◽  
Aqueous Environment ◽  
Human Beings ◽  
Nickel Ferrite Nanoparticles

AbstractThe heavy metals, such as Cr(VI), Pb(II) and Cd(II), in aqueous solutions are toxic even at trace levels and have caused adverse health impacts on human beings. Hence the removal of these heavy metals from the aqueous environment is important to protect biodiversity, hydrosphere ecosystems, and human beings. In this study, magnetic Nickel-Ferrite Nanoparticles (NFNs) were synthesized by co-precipitation method and characterized using X-Ray Diffraction (XRD), Energy Dispersive Spectroscopy (EDS) and Field Emission Scanning Electronic Microscopy (FE-SEM) techniques in order to confirm the crystalline structure, composition and morphology of the NFN’s, these were then used as adsorbent for the removal of Cr(VI), Pb(II) and Cd(II) from wastewater. The adsorption parameters under study were pH, dose and contact time. The values for optimum removal through batch-adsorption were investigated at different parameters (pH 3–7, dose: 10, 20, 30, 40 and 50 mg and contact time: 30, 60, 90, and 120 min). Removal efficiencies of Cr(VI), Pb(II) and Cd(II) were obtained 89%, 79% and 87% respectively under optimal conditions. It was found that the kinetics followed the pseudo second order model for the removal of heavy metals using Nickel ferrite nanoparticles.

scholarly journals Treatment of Synthetic Produced Water using Hybrid Membrane Processes

2018 ◽  
Vol 22 (2) ◽  
Author(s):  
N. Chin ◽  
S. O. Lai ◽  
K. C. Chong ◽  
S. S. Lee ◽  
C. H. Koo ◽  
...  
Keyword(s):  
Tio2 Nanoparticles ◽  
Produced Water ◽  
Removal Rate ◽  
Pure Water ◽  
Water Flux ◽  
Transmembrane Pressure ◽  
Oil Removal ◽  
Permeate Flux ◽  
Uf Membranes ◽  
Pes Membrane

The study was concerned with the treatment of tank dewatering produced water using hybrid microfiltration (MF) and ultrafiltration (UF) processes. The pre-treatment MF membrane was fabricated with polyethersulfone (PES), n-methyl-2-pyrrolidone (NMP) and polyvinylpyrrolidone (PVP). The UF membranes meanwhile contained additional component, i.e., titanium dioxide (TiO2) nanoparticles in the range of zero to 1.0 wt.%. The membrane performances were analysed with respect to permeate flux, oil removal and flux recovery ratio. An increase in TiO2 nanoparticles enhanced the pore formation, porosity and pure water permeability due to improved hydrophilicity. The permeate flux of UF membranes increased with the increase of TiO2 nanoparticles and pressure. The oil removal rate by MF process was only 52.35%, whereas the oil rejection efficiency was between 82.34% and 95.71% for UF process. It should be highlighted that the overall oil removal rate could achieve as high as 97.96%. Based on the results, the PES membrane incorporated with 1.0 wt.% TiO2 was proved to be the most promising membrane at a transmembrane pressure of 3 bar. Although 1.0 M NaOH solution could be used as cleaning agent to recover membrane water flux, it is not capable of achieving good results as only 52.18% recovery rate was obtained.

scholarly journals The Modification of PVDF Membrane via Crosslinking with Chitosan and Glutaraldehyde as the Crosslinking Agent

2018 ◽  
Vol 18 (1) ◽  
pp. 1
Author(s):  
Romaya Sitha Silitonga ◽  
Nurul Widiastuti ◽  
Juhana Jaafar ◽  
Ahmad Fauzi Ismail ◽  
Muhammad Nidzhom Zainol Abidin ◽  
...  
Keyword(s):  
Contact Angle ◽  
Vinylidene Fluoride ◽  
Membrane Surface ◽  
Pure Water ◽  
Water Flux ◽  
Crosslinking Agent ◽  
Hydrophobic Properties ◽  
Pvdf Membrane ◽  
Pure Water Flux ◽  
Modified Membrane

Poly(vinylidene fluoride) (PVDF) has outstanding properties such as high thermal stability, resistance to acid solvents and good mechanical strength. Due to its properties, PVDF is widely used as a membrane matrix. However, PVDF membrane is hydrophobic properties, so as for specific applications, the surface of membrane needs to be modified to become hydrophilic. This research aims to modify PVDF membrane surface with chitosan and glutaraldehyde as a crosslinker agent. The FTIR spectra showed that the modified membrane has a peak at 1655 cm-1, indicating the imine group (–N=C)- that was formed due to the crosslink between amine group from chitosan and aldehyde group from glutaraldehyde. Results showed that the contact angle of the modified membrane decreases to 77.22° indicated that the membrane hydrophilic properties (< 90°) were enhanced. Prior to the modification, the contact angle of the PVDF membrane was 90.24°, which shows hydrophobic properties (> 90°). The results of porosity, Ɛ (%) for unmodified PVDF membrane was 55.39%, while the modified PVDF membrane has a porosity of 81.99%. Similarly, by modifying the PVDF membrane, pure water flux increased from 0.9867 L/m2h to 1.1253 L/m2h. The enhancement of porosity and pure water flux for the modified PVDF membrane was due to the improved surface hydrophilicity of PVDF membrane.

Preparation and Characterization of Poly(vinylidene) Fluoride Membranes Reinforced by Modified Nano-SiO2 Particles

2014 ◽  
Vol 789 ◽  
pp. 201-204
Author(s):  
Ai Wen Qin ◽  
Xiang Li ◽  
Bo Mou Ma ◽  
Xin Zhen Zhao ◽  
Chun Yi Liu ◽  
...  
Keyword(s):  
Pore Size ◽  
Vinylidene Fluoride ◽  
Cell Structure ◽  
Membrane Surface ◽  
Pure Water ◽  
Water Flux ◽  
Cross Sectional ◽  
Antifouling Property ◽  
Poly Vinylidene Fluoride ◽  
Mechanical Performances

Poly (vinylidene fluoride) (PVDF) hybrid membranes reinforced by hydrophilic nanoSiO2 particles were fabricated from PVDF/N-dimethylacetamide (DMAc)/γ-butyrolactone (γ-BL) system via thermally induced phase separation (TIPS) process. Surface and cross-sectional morphology of membranes were characterized by scanning electron microscope (SEM). The properties such as permeability, mechanical performances and antifouling property were also determined. The results showed that the pore size of membrane surface became smaller, while cross-sectional morphology was changed from bicontinuous structure to cell structure, the pore size became larger and majorities of closed pores became open with the addition of hydrophilic nanoSiO2 particles in the system. Compared with pure membrane, pure water flux of hybrid membrane increased by 30.3%, i.e. from 290 to 378 L/(m2·h·0.1MPa), antifouling property increased from 63.1% to 80.2%. Meanwhile, tensile strength and elongation at break increased by 70.6% and124%, respectively.

scholarly journals Effect of Polyvinyl Pyrolidone on Morphology and Performance of Cellulose Acetate Based Dialysis Membrane

2019 ◽  
Vol 9 (1) ◽  
pp. 3744-3749
Author(s):  
H. Waheed ◽  
A. Hussain
Keyword(s):  
Contact Angle ◽  
Cellulose Acetate ◽  
Membrane Surface ◽  
Pure Water ◽  
Water Flux ◽  
Mixed Matrix Membrane ◽  
Mixed Matrix ◽  
Urea Clearance ◽  
And Performance ◽  
Operation Phase

Polyvinyl pyrolidone (PVP) was added as filler in cellulose acetate (CA) to produce mixed matrix membrane (MMM) for hemodialysis operation. Phase separation induced by diffusion (DIPS) was used for fabrication of mixed matrix CA/PVP flat sheet membranes. The effect of adding PVP was investigated on the morphology and permeation efficiencies of CA membranes. The surface arrangement of polymer and additives in pure and blended membrane was studied by FTIR, contact angle and SEM. Results revealed homogenous and significant mixing of PVP content into pure CA matrix. Performance efficiency of blended membranes was investigated by means of pure water flux (PWF), urea clearance and % rejection of bovine serum albumin (BSA). The observable decrease of contact angle from 83° to 69° in CA/PVP MMM membranes of varying composition effectively revealed enhancement in hydrophilicity of MMM membrane surface. For protein rejection, all CA/PVP membranes rejected>90% of BSA relative to 25% for pure CA membrane. Furthermore, urea clearance behavior for CA/PVP membranes was 62.4% in comparison to 52% for pure CA membrane. The incorporation PVP i.e 1% by weight (Mpvp1) significantly improved the hydrophilicity, PWF, BSA rejection and urea clearance percentages of modified CA membrane for dialysis application.

scholarly journals Ultrafiltration of α-Lactalbumin Protein: Acquaintance of the Filtration Performance by Membrane Structure and Surface Alteration

Polymers ◽  
2021 ◽  
Vol 13 (21) ◽  
pp. 3632
Author(s):  
Nasrul Arahman ◽  
Cut Meurah Rosnelly ◽  
Yusni Yusni ◽  
Afrillia Fahrina ◽  
Silmina Silmina ◽  
...  
Keyword(s):  
Membrane Surface ◽  
Pure Water ◽  
Multiple Roles ◽  
Pluronic F127 ◽  
Water Contact ◽  
Surface Alteration ◽  
Pressure Stabilization ◽  
Pes Membrane ◽  
Cell Inhibition ◽  
Better Than

α-Lactalbumin is an essential protein with multiple roles in physiological and the nutritional functionalities, such as diabetic prevention, blood pressure stabilization, and cancer cell inhibition. In the present work, polyethersulfone (PES)-based membranes were developed by incorporating Pluronic F127 and carbon nanotubes with single- and multi-walled dimensions (Sw-Cnts and Mw-Cnts) as additives. The resulting membranes were evaluated for use in the filtration of α-lactalbumin protein solution. Four series of membranes, including PES pristine membrane, were fabricated via the phase inversion process. The characteristics of the membrane samples were analyzed in terms of morphology, membrane surface hydrophilicity and roughness, and surface chemistry. The characterization results show that the incorporation of additive increased the surface wettability by reducing the surface water contact angle from 80.4° to 64.1° by adding F127 and Mw-Cnt additives. The highest pure water permeability of 135 L/(m2·h·bar) was also exhibited by the PES/F127/Mw-Cnt membrane. The performance of the modified membranes was clearly better than the pristine PSF for α-lactalbumin solution filtration. The permeability of α-lactalbumin solution increased from 9.0 L/(m2·h·bar) for the pristine PES membrane to 10.5, 11.0 and 11.5 L/(m2·h·bar) for membranes loaded with Pluronic F127, Sw-Cnts, and Mw-Cnts, respectively. Those increments corresponded to 17, 22, and 28%. Such increments could be achieved without altering the α-lactalbumin rejections of 80%. Remarkably, the rejection for the membrane loaded with Sw-Cnts even increased to 89%.

PREPARATION AND CHARACTERIZATION OF SUPERHYDROPHILIC NANOCOMPOSITE ULTRAFILTRATION MEMBRANES FOR TREATMENT OF HIGHLY CONCENTRATED OIL-IN-WATER EMULSION

2017 ◽  
Vol 79 (1-2) ◽  
Author(s):  
G. S. Lai ◽  
W. J. Lau ◽  
P. S. Goh ◽  
Y. H. Tan ◽  
A. F. Ismail ◽  
...  
Keyword(s):  
Removal Rate ◽  
Pure Water ◽  
Water Flux ◽  
Industrial Applications ◽  
Polymeric Membrane ◽  
Oil Removal ◽  
Water Emulsion ◽  
Pes Membrane ◽  
Oil In Water Emulsion ◽  
Oily Solution

In oily wastewater treatment using membrane technology, surface fouling is the major issue that could deteriorate membrane flux and shorten its lifespan. Therefore, nanocomposite membranes were developed in this study by incorporating titanium dioxide (TiO2) and hydrous manganese oxide (HMO) nanoparticles into polymeric membrane matrix. Three different types of membranes were fabricated. They were pristine PES and membrane incorporated with TiO2 or HMO. With respect to pure water flux, TiO2- and HMO-incorporated membranes showed value of 57 and 40 L/m2.h, respectively. These values were 33-90% higher than that of control PES membrane. In treating 500 ppm oily solution, TiO2 membrane exhibited the highest water flux. However, the membrane’s oil removal rate was slightly compromised. When tested with higher concentration of oily solution (5,000 or 10,000 ppm), TiO2- and HMO-incorporated membranes still showed promising water flux with 94.5-99.6% oil removal rate. This proved that ultrafiltration membrane incorporated with suitable nanomaterials could improve the water flux of pristine PES membrane and is of more practical for industrial applications.

Sign in / Sign up

Export Citation Format

Share Document