scholarly journals Extraction, chemical composition, and characterization of potential lignocellulosic biomasses and polymers from corn plant parts

BioResources ◽  
2019 ◽  
Vol 14 (3) ◽  
pp. 6485-6500 ◽  
Author(s):  
M. I. J. Ibrahim ◽  
S. M. Sapuan ◽  
E. S. Zainudin ◽  
M. Y. M. Zuhri
Keyword(s):  
Thermal Stability ◽  
Chemical Composition ◽  
Surface Morphology ◽  
Corn Starch ◽  
Amylose Content ◽  
Crystallinity Index ◽  
Cellulose Content ◽  
Corn Plant ◽  
Plant Parts ◽  
Corn Husk

Corn is a plant that can be used as a potential source of biomass for various biomaterial applications. Thermoplastic corn starch and corn hull, husk, and stalk fibers were extracted from different corn plant parts. The chemical composition, physical properties, thermal stability, crystallinity index, and surface morphology of the extracted samples were characterized on a powder basis. The corn husk and corn starch revealed an excellent combination of properties. Corn husk provided the highest cellulose content as well as the most favorable surface morphology. Corn starch revealed acceptable amylose content and tolerable thermal stability. The cellulose and starch demonstrated an excellent correlation between the function and structure of biomolecules. Hence, both corn starch and husk have potential for use in many applications of the biomaterial.

scholarly journals Effect of Chemical Treatment Sequence on Pineapple Peel Fiber: Chemical Composition, Thermal Stability and Thermal Degradation Kinetics

2022 ◽  
Author(s):  
Paulo Henrique Fernandes Pereira ◽  
Heitor Luiz Ornaghi ◽  
Daniel Magalhães de Oliveira ◽  
Barbara Pereira ◽  
Valdeir Arantes ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Chemical Composition ◽  
Thermal Degradation ◽  
Degradation Kinetics ◽  
Crystallinity Index ◽  
Thermal Degradation Kinetics ◽  
Environmental Damage ◽  
Cellulose Content ◽  
Pineapple Peel ◽  
The Impact

Abstract Millions of tons of fruit wastes are generated globally every year from residual agriculture, which makes essential to find alternative uses to increase their aggregate value and reduce the impact of environmental damage. The present study aimed to explore pineapple peel as an alternative source of cellulose by evaluating its composition and physical properties, which are essential to provide a clue to its application function diverse. Cellulose was extracted by a sequence of chlorine-free treatments to delignify the fresh pineapple peels, followed by characterization using chemical composition, XRD, FTIR, SEM and TGA to determine its crystallinity, structural properties, morphology thermal characteristics, and thermal degradation kinetic study. The result revealed that the pineapple peel amorphous segments containing hemicelluloses and lignin were extensively removed with increasing chemical treatments, leading to increased purity, crystallinity index and thermal stability of the extracted materials. The maximum degradation, and crystallinity index of the 2B isolated from the PPF are 150 °C and 80.91% respectively. The cellulose content increased from 24.05% (pineapple peel) to 80.91% (bleached cellulose). These results indicated that pretreatment via bleaching has suitable potential applications in nanocrystal production and suggests possible uses in the development of cellulose nanocrystal and application for packaging films.

Optimization of Treatment Parameters for Extracting Canola Fiber

2021 ◽  
Vol 64 (5) ◽  
pp. 1425-1433
Author(s):  
Vahid Sadrmanesh ◽  
Ying Chen ◽  
Hamid Reza Fazeli ◽  
Mashiur Rahman ◽  
Simon Potter
Keyword(s):  
Thermal Stability ◽  
Reaction Time ◽  
Chemical Composition ◽  
Crystallinity Index ◽  
Optimal Treatment ◽  
List Type ◽  
Fiber Properties ◽  
Degradation Temperature ◽  
Fiber Yield ◽  
Treatment Conditions

HighlightsCanola fibers were treated at different levels of time, temperature, and NaHCO3 concentration.Fiber yield, chemical composition, crystallinity index, and thermal stability were measured.A model was developed to predict the optimal treatment parameters.The optimal treatment parameters were 38 h time, 58°C temperature, and 5.6% NaHCO3 concentration.Abstract. Optimal treatment conditions for high quantity and quality fibers for composite applications have not been well documented for canola fibers. In this study, experiments were conducted to treat canola stalks in chemical solutions under the following treatment conditions: 12 to 72 h reaction time, 24°C to 90°C temperature, and 0% to 10% NaHCO3 concentration (% w/w). Fiber yield, chemical composition, crystallinity index, thermal stability, and maximum degradation temperature of the fibers were measured. With the experimental data, a multi-objective optimization model that was a combination of a genetic algorithm (GA) with consecutive sequential quadratic programming (SQP) was developed to predict the optimal treatment parameters. Results showed that reaction time was the most important parameter, followed by reaction temperature and NaHCO3 concentration. These treatment parameters affected the fiber yield and thermal properties in different ways. The treatments also changed the chemical composition of the fibers. The optimal treatment parameters for time, temperature, and NaHCO3 concentration to achieve the highest quantity and quality fibers were 38 h, 58°C, and 5.6%, respectively. The results from this study will enhance understanding of the relationships between canola fiber properties and treatment conditions and help in selecting the best possible treatment for extracting fibers from canola stalks. Keywords: Canola fiber, Fiber yield, Optimization, Property, Treatment.

scholarly journals Characterization of microcrystalline cellulose extracted from walnut and apricots shells by alkaline treatment

2021 ◽  
pp. 11-11
Author(s):  
Yasmine Mahmoud ◽  
Zitouni Safidine ◽  
Naima Belhaneche-Bensemra
Keyword(s):  
Chemical Composition ◽  
Microcrystalline Cellulose ◽  
Paper Industry ◽  
Crystallinity Index ◽  
Alkaline Treatment ◽  
Agricultural Wastes ◽  
Morphological Properties ◽  
Cellulose Content ◽  
X Ray Diffraction ◽  
X Ray

In this study, microcrystalline cellulose (MCC) was isolated from walnut and apricot shells (WS and AS) as agricultural wastes in order to use it as reinforcement in polymer composites. The microcrystalline cellulose was extracted by alkaline treatment and bleached by peroxide as an environmentally friendly treatment, called walnut cellulose (WC) and apricot cellulose (AC). The chemical composition of the samples was set according to the Technical Association of Pulp and Paper Industry (TAPP). After treatments, the alpha-cellulose content increased by about 23 % for the two used cellulose sources. The structural and morphological properties of the samples were investigated by Fourier transform infrared spectroscopy in the attenuated total reflectance mode (ATR-FTIR), optical microscopy (OM), X-ray diffraction and scanning electron microscopy (SEM). The crystallinity index values evaluated for WC and AC via X-ray diffraction were respectively 86.4 and 80.3 %. The alkaline soluble fractions of walnut (ASW) and apricot (ASA) shells were recovered and characterized by OM and ATR-FTIR spectroscopy. Furthermore, their chemical composition was analyzed. The characterization and the properties of the WC and AC were similar to those of commercial MCC and MCC prepared in literature from wood and some agricultural wastes.

scholarly journals Cellulose Nanocrystals from Fibers of Macauba (Acrocomia Aculeata) and Gravata (Bromelia Balansae) from Brazilian Pantanal

Polymers ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 1785 ◽  
Author(s):  
Ana Carolina Corrêa ◽  
Vitor Brait Carmona ◽  
José Alexandre Simão ◽  
Fabio Galvani ◽  
José Manoel Marconcini ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Acid Hydrolysis ◽  
Cellulose Nanocrystals ◽  
Cellulose Degradation ◽  
Crystallinity Index ◽  
Palm Tree ◽  
Cellulose Content ◽  
Hydrolysis Time ◽  
Brazilian Pantanal

Cellulose nanocrystals (CNC) were obtained from macauba and gravata fibers. Macauba (or Bocaiuva) is a palm tree found throughout most of Brazil and Gravata is an abundant kind of bromelia with 1–2m long leaves, found in Brazilian Pantanal and Cerrado. The raw fibers of both fibers were mercerized with NaOH solutions and bleached; they were then submitted to acid hydrolysis using H2SO4 at 45 °C, varying the hydrolysis time from 15 up to 75 min. The fibers were analyzed by X-ray diffraction (XRD), FTIR Spectroscopy, scanning electron microscopy (SEM) and thermal stability by thermogravimetric analysis (TG). XRD patterns did not present changes in the crystal structure of cellulose after mercerization, but it was observed a decrease of hemicellulose and lignin contents, and consequently an increase of cellulose content with the increase of NaOH solution concentration in the mercerization. After acid hydrolysis, the cellulose nanocrystals (CNC) were also analyzed by transmission electron microscopy (TEM) which showed an acicular or rod-like aspect and nanometric dimensions of CNC from both fibers, but the higher values of aspect ratio (L/D) were found on CNC obtained from gravata after 45 min of acid hydrolysis. The mercerization and subsequent bleaching of fibers influenced the crystallinity index and thermal stability of the resulting CNC, but their properties are mainly influenced by the hydrolysis time, i. e., there is an increase in crystallinity and thermal stability up to 45 min of hydrolysis, after this time, both properties decrease, probably due to the cellulose degradation by the sulfuric acid.

scholarly journals The Distribution of Minerals in Crucial Plant Parts of Various Elderberry (Sambucus spp.) Interspecific Hybrids

Plants ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 653
Author(s):  
Nataša Imenšek ◽  
Vilma Sem ◽  
Mitja Kolar ◽  
Anton Ivančič ◽  
Janja Kristl
Keyword(s):  
Chemical Composition ◽  
Mineral Composition ◽  
Plant Development ◽  
Interspecific Hybrids ◽  
Food Industry ◽  
Mineral Content ◽  
Genetic Breeding ◽  
Plant Parts ◽  
Early Stages ◽  
Superior Genotypes

In view of growing requirements of the food industry regarding elderberries (genus Sambucus), a need to increase their productivity and improve their chemical composition has emerged. With this purpose in mind, numerous elderberry interspecific hybrids have been created. In the present work, the content of minerals in their crucial plant parts was studied. It was also investigated whether superior genotypes regarding the mineral composition of berries and inflorescences could be predicted at early stages of plant development. The results showed that elderberry leaves contained the highest amounts of Ca, Mg, Mn, Zn, and Sr, while K and P were predominant in fruit stalks. Fe and Al prevailed in roots and Cu in bark. Although berries showed lower mineral content compared to other plant parts, their mineral content is not negligible and could be comparable to other commonly consumed berries. Genotypes with a favorable mineral content of inflorescences and berries could be predicted on the basis of known mineral composition of their shoots and leaves. The study also indicates that S. nigra genotypes and the majority of interspecific hybrids analyzed are suitable for further genetic breeding or cultivation.

scholarly journals Recycling Waste Cotton Cloths for the Isolation of Cellulose Nanocrystals: A Sustainable Approach

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 626
Author(s):  
Siti Hajar Mohamed ◽  
Md. Sohrab Hossain ◽  
Mohamad Haafiz Mohamad Kassim ◽  
Mardiana Idayu Ahmad ◽  
Fatehah Mohd Omar ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Cellulose Nanocrystals ◽  
Value Added ◽  
Crystallinity Index ◽  
Attenuated Total Reflection ◽  
Cellulose Content ◽  
Scanning Calorimetry ◽  
Good Thermal Stability ◽  
Alkaline Pulping ◽  
Hydrolysis Of Cellulose

There is an interest in the sustainable utilization of waste cotton cloths because of their enormous volume of generation and high cellulose content. Waste cotton cloths generated are disposed of in a landfill, which causes environmental pollution and leads to the waste of useful resources. In the present study, cellulose nanocrystals (CNCs) were isolated from waste cotton cloths collected from a landfill. The waste cotton cloths collected from the landfill were sterilized and cleaned using supercritical CO2 (scCO2) technology. The cellulose was extracted from scCO2-treated waste cotton cloths using alkaline pulping and bleaching processes. Subsequently, the CNCs were isolated using the H2SO4 hydrolysis of cellulose. The isolated CNCs were analyzed to determine the morphological, chemical, thermal, and physical properties with various analytical methods, including attenuated total reflection-Fourier transform-infrared spectroscopy (ATR-FTIR), field-emission scanning electron microscopy (FE-SEM), energy-filtered transmission electron microscopy (EF-TEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The results showed that the isolated CNCs had a needle-like structure with a length and diameter of 10–30 and 2–6 nm, respectively, and an aspect ratio of 5–15, respectively. Additionally, the isolated CNCs had a high crystallinity index with a good thermal stability. The findings of the present study revealed the potential of recycling waste cotton cloths to produce a value-added product.

scholarly journals Chemical and Structural Characterization of Maize Stover Fractions in Aspect of Its Possible Applications

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1527
Author(s):  
Magdalena Woźniak ◽  
Izabela Ratajczak ◽  
Dawid Wojcieszak ◽  
Agnieszka Waśkiewicz ◽  
Kinga Szentner ◽  
...  
Keyword(s):  
Structural Characterization ◽  
Biogas Production ◽  
Structural Parameters ◽  
C:N Ratio ◽  
Crystallinity Index ◽  
Degree Of Crystallinity ◽  
Cellulose Content ◽  
X Ray Diffraction ◽  
Maize Stover

In the last decade, an increasingly common method of maize stover management is to use it for energy generation, including anaerobic digestion for biogas production. Therefore, the aim of this study was to provide a chemical and structural characterization of maize stover fractions and, based on these parameters, to evaluate the potential application of these fractions, including forbiogas production. In the study, maize stover fractions, including cobs, husks, leaves and stalks, were used. The biomass samples were characterized by infrared spectroscopy (FTIR), X-ray diffraction and analysis of elemental composition. Among all maize stover fractions, stalks showed the highest C:N ratio, degree of crystallinity and cellulose and lignin contents. The high crystallinity index of stalks (38%) is associated with their high cellulose content (44.87%). FTIR analysis showed that the spectrum of maize stalks is characterized by the highest intensity of bands at 1512 cm−1 and 1384 cm−1, which are the characteristic bands of lignin and cellulose. Obtained results indicate that the maize stover fraction has an influence on the chemical and structural parameters. Moreover, presented results indicate that stalks are characterized by the most favorable chemical parameters for biogas production.

scholarly journals A Characterization Study of Morphology and Properties of Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH)/Aloe Vera Fibers Biocomposites: Effect of Fiber Surface Treatments

Proceedings ◽  
2020 ◽  
Vol 69 (1) ◽  
pp. 38
Author(s):  
Celia Idres ◽  
Mustapha Kaci ◽  
Nadjet Dehouche ◽  
Idris Zembouai ◽  
Stéphane Bruzaud
Keyword(s):  
Thermal Stability ◽  
Surface Morphology ◽  
Water Absorption ◽  
Loss Modulus ◽  
Aloe Vera ◽  
Fiber Surface ◽  
Complex Viscosity ◽  
Absorption Capacity ◽  
Characterization Study ◽  
Efficient Route

This paper aims to investigate the effect of different chemical modifications of biocomposites based on poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) and aloe vera bio-fibers incorporated at 20 wt%. The fiber surface was modified with alkaline, organosilanes, and combined alkaline/organosilanes. Surface morphology, thermal stability, water absorption capacity, and rheological behavior of the modified biocomposite materials were studied, and the results compared to both unmodified biocomposites and neat PHBH. The study showed that the modified biocomposites with both alkaline and organosilanes exhibited an improved surface morphology, resulting in a good fiber/matrix interfacial adhesion. As a result, increases in complex viscosity, storage modulus, and loss modulus were observed, whereas water absorption was reduced. Thermal stability remained almost unchanged, with the exception of the biocomposite treated with alkaline, where this property decreased significantly. Finally, the coupling of alkaline and organosilane modification is an efficient route to enhance the properties of PHBH biocomposites.

Research on Damping Properties of TiN Coating Prepared with Arc Ion Plating

2012 ◽  
Vol 184-185 ◽  
pp. 1167-1170
Author(s):  
Guang Yu Du ◽  
Zhen Tan ◽  
Kun Liu ◽  
Hao Chai ◽  
De Chun Ba
Keyword(s):  
Chemical Composition ◽  
Surface Morphology ◽  
Loss Factor ◽  
Steel Substrate ◽  
Damping Ratio ◽  
Energy Dispersive Spectrometer ◽  
Tin Coating ◽  
Arc Ion Plating ◽  
Ion Plating ◽  
Half Power

In this paper TiN coating was prepared on stainless steel substrate using arc ion plating technique. The coating samples’ phases, surface morphology, micro-determination chemical composition, loss factor and damping ratio were tested. The phases of TiN coating were determined by X-ray diffraction (XRD) technique. The surface morphology and chemical composition of the TiN coating were analyzed by scanning electron microscope (SEM) and Energy Dispersive Spectrometer (EDS), respectively. The damping performance of the samples was measured by hammering activation according half power bandwidth method. The loss factor or damping ratio of samples were obtained according frequency response curve. The results showed that damping performance of samples was considerably improved by TiN coatings.

Sign in / Sign up

Export Citation Format

Share Document