scholarly journals Reproductive incompatibility and fitness components in Neoleucinodes elegantalis races (Lepidoptera, Crambidae) from three Solanaceae hosts

Caldasia ◽  
2018 ◽  
Vol 40 (2) ◽  
pp. 199-215
Author(s):  
Ana Elizabeth Díaz-Montilla ◽  
Nathalie Baena-Bejarano ◽  
Clara Ines Saldamando ◽  
James Montoya-Lerma
Keyword(s):  
Reproductive Isolation ◽  
Survival Rates ◽  
Medium Size ◽  
Postzygotic Isolation ◽  
Fitness Components ◽  
Large Size ◽  
Reproductive Incompatibility ◽  
Pheromone Composition ◽  
F1 Progeny ◽  
Race Differentiation

Neoleucinodes elegantalis (Lepidoptera, Crambidae) is a Neotropical Solanaceae pest that has evolved into four host races due to host plant association. In this study, prezygotic and postzygotic isolation were evaluated in parental and F1 generations collected from Solanum lycopersicum (S. l), S. quitoense (S. q) and S. betaceum (S. b), representing medium size (S. l, S. q) and large size genitalia races (S. b). 617 adults were obtained in the laboratory and 106 copulated. One spermatophore per female was found in the bursa copulatrix, suggesting monoandry. Crosses between adults mostly occurred assortatively. A third of the female’s eggs laid occurred, but females from ♀S. b x ♂ S. l, ♀S. l x ♂S. b and S. l x S. l did not. In the cross, ♀S. l x ♂ S. q and its reciprocal F1 progeny developed into larvae. Reproductive success only occurred in three crosses: S. q x S. q, ♀ S. q x ♂ S. b and its reciprocal progeny. All the progeny from these crosses reached adulthood. The parental population showed differences in pupae and adult measurements according to host. The results on reproductive isolation obtained here suggest speciation in N. elegantalis due to host race differentiation which is relevant for the improvement of the management of this species, especially when the species has evolved reproductive isolation among races. We suggest that the use of their host plants in sympatry might reduce N. elegantalis densities in the field since hybrids between its races have low survival rates and to evaluate the possibility of pheromone composition differentiation among races given the results on assortative mating obtained here.

AISI TYPE S2

Alloy Digest ◽  
1982 ◽  
Vol 31 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Shock Loading ◽  
Heat Treating ◽  
Medium Size ◽  
Hard Case ◽  
Large Size ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI Type S2 is a water-hardening tool steel with extreme toughness and resistance to shock loading. Even at a hardness of Rockwell C 59-60, it will bend before it breaks. When hardened in medium-size and large-size pieces, it acquires a hard case and a tough core. Sizes under 3/4-inch (19mm) diameter will water harden to the center. The extreme toughness of Type S2 makes it suitable for use in many applications where no other tool steel will hold up. Its many uses include chisels, rivet busters, spike mauls, screw drivers, punches and sledges. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-408. Producer or source: Tool steel mills.

scholarly journals Exercise Intensity and Technical Involvement in U9 Team Handball: Effect of Game Format

2021 ◽  
Vol 18 (11) ◽  
pp. 5663
Author(s):  
Georgios Ermidis ◽  
Rasmus C. Ellegard ◽  
Vincenzo Rago ◽  
Morten B. Randers ◽  
Peter Krustrup ◽  
...  
Keyword(s):  
Heart Rate ◽  
Locomotor Activity ◽  
Exercise Intensity ◽  
High Intensity ◽  
High Speed ◽  
Medium Size ◽  
Total Distance ◽  
Team Handball ◽  
Large Size ◽  
Game Format

The purpose of this study was to quantify the exercise intensity and technical involvement of U9 boys’ and girls’ team handball during different game formats, and the differences between genders. Locomotor activity (total distance, distance in speed zones, accelerations, and decelerations), heart rate (HR), and technical involvement (shots, goals, and duels) metrics were collected during various 15 min game formats from a total of 57 Danish U9 players (37 boys and 20 girls). Game formats were a small size pitch (20 × 13 m) with 3 vs 3 players and offensive goalkeepers (S3 + 1) and 4 vs 4 players (S4), a medium size pitch (25.8 × 20 m) with 4 vs 4 (M4) and 5 vs 5 (M5) players, and a large size pitch (40 × 20 m) with 5 vs 5 (L5) players. Boys and girls covered a higher total distance (TD) of high-speed running (HSR) and sprinting during L5 games compared to all other game formats (p < 0.05; ES = (−0.9 to −2.1), (−1.4 to −2.8), and (−0.9 to −1.3) respectively). Players covered the highest amount of sprinting distance in L5 games compared to all other game formats (p < 0.01; ES = 0.8 to 1.4). In all the game formats, players spent from 3.04 to 5.96 min in 180–200 bpm and 0.03 min to 0.85 min in >200 bpm of the total 15 min. In addition, both genders had more shots in S3 + 1 than M5 (p < 0.01; ES = 1.0 (0.4;1.7)) and L5 (p < 0.01; ES = 1.1 (0.6;2.2)). Team handball matches have high heart rates, total distances covered, and high-intensity running distances for U9 boys and girls irrespective of the game format. Locomotor demands appeared to be even higher when playing on larger pitches, whereas the smaller pitch size and fewer players led to elevated technical involvement.

scholarly journals Morphologically cryptic Amazonian bird species pairs exhibit strong postzygotic reproductive isolation

2018 ◽  
Vol 285 (1874) ◽  
pp. 20172081 ◽  
Author(s):  
Paola Pulido-Santacruz ◽  
Alexandre Aleixo ◽  
Jason T. Weir
Keyword(s):  
Reproductive Isolation ◽  
Amazon Basin ◽  
Species Recognition ◽  
Bird Species ◽  
Hybrid Zones ◽  
Hybrid Index ◽  
Postzygotic Isolation ◽  
Genome Wide ◽  
Species Pairs ◽  
Hybrid Classes

We possess limited understanding of how speciation unfolds in the most species-rich region of the planet—the Amazon basin. Hybrid zones provide valuable information on the evolution of reproductive isolation, but few studies of Amazonian vertebrate hybrid zones have rigorously examined the genome-wide underpinnings of reproductive isolation. We used genome-wide genetic datasets to show that two deeply diverged, but morphologically cryptic sister species of forest understorey birds show little evidence for prezygotic reproductive isolation, but substantial postzygotic isolation. Patterns of heterozygosity and hybrid index revealed that hybrid classes with heavily recombined genomes are rare and closely match simulations with high levels of selection against hybrids. Genomic and geographical clines exhibit a remarkable similarity across loci in cline centres, and have exceptionally narrow cline widths, suggesting that postzygotic isolation is driven by genetic incompatibilities at many loci, rather than a few loci of strong effect. We propose Amazonian understorey forest birds speciate slowly via gradual accumulation of postzygotic genetic incompatibilities, with prezygotic barriers playing a less important role. Our results suggest old, cryptic Amazonian taxa classified as subspecies could have substantial postzygotic isolation deserving species recognition and that species richness is likely to be substantially underestimated in Amazonia.

scholarly journals Survival Rate of Cells Sent by a Low Mechanical Load Tube Pump: The “Ring Pump”

Micromachines ◽  
2020 ◽  
Vol 11 (4) ◽  
pp. 447 ◽  
Author(s):  
Kaoru Uesugi ◽  
Keizo Nishiyama ◽  
Koki Hirai ◽  
Hiroaki Inoue ◽  
Yoichi Sakurai ◽  
...  
Keyword(s):  
Survival Rate ◽  
Cell Survival ◽  
Saline Solution ◽  
Mechanical Load ◽  
Survival Rates ◽  
Cell Culture System ◽  
Large Size ◽  
Cell Survival Rate ◽  
Peristaltic Pumps ◽  
Phosphate Buffered Saline

A ring pump (RP) is a useful tool for microchannels and automated cell culturing. We have been developing RPs (a full-press ring pump, FRP; and a mid-press ring pump, MRP). However, damage to cells which were sent by the RP and the MRP was not investigated, and no other studies have compared the damage to cells between RPs and peristaltic pumps (PPs). Therefore, first, we evaluated the damage to cells that were sent by a small size FRP (s-FRP) and small size MRPs (s-MRPs; gap = 25 or 50 μm, respectively). “Small size” means that the s-FRP and the s-MRPs are suitable for microchannel-scale applications. The survival rate of cells sent by the s-MRPs was higher than those sent by the s-FRP, and less damage caused by the former. Second, we compared the survival rate of cells that were sent by a large size FRP (l-FRP), a large size MRP (l-MRP) (gap = 50 μm) and a PP. “Large size” means that the l-FRP and the l-MRP are suitable for automated cell culture system applications. We could not confirm any differences among the cell survival rates. On the other hand, when cells suspended in Dulbecco’s phosphate-buffered saline solution were circulated with the l-MRP (gap = 50 μm) and the PP, we confirmed a difference in cell survival rate, and less damage caused by the former.

scholarly journals Hearing gain after myringoplasty in relation to the size of tympanic membrane perforation

2020 ◽  
Vol 25 (1) ◽  
pp. 54-59
Author(s):  
Sutanu Kumar Mondal ◽  
Ashim Kumar Biswas ◽  
Md Mahmudul Huq ◽  
Md Hasan Ali ◽  
Md Kamruzzaman ◽  
...  
Keyword(s):  
Hearing Loss ◽  
Tympanic Membrane ◽  
Bone Conduction ◽  
Tympanic Membrane Perforation ◽  
Medium Size ◽  
Hearing Gain ◽  
Bone Conduction Threshold ◽  
Large Size ◽  
Membrane Perforation ◽  
Air Conduction

Objectives: To assess hearing gain after successful myringoplasty in relation to the size of tympanic membrane perforation. Methods: This cross-sectional study was done in the department of otolaryngology and head neck surgery, BSMMU, Sahbag, Dhaka during the period of January 2009 to December 2010.A total of 60 patients were under went myringoplasty operation after taking detailed history, clinical examination and investigation. Preoperative and postoperative hearing assessment was done. Analysed data presented by various tables, graphics and figures. Results: In case of small size perforation preoperative mean bone conduction threshold was 7.66 dB, mean air conduction threshold was 34.14 dB and mean air bone gap was 26.48 dB. In case of medium size perforation preoperative mean bone conduction threshold was 9.61 dB, mean air conduction threshold was 44.48 dB. Mean air bone gap was 34.87 dB. In case of large size perforation preoperative mean bone conduction threshold was 13.12 dB, mean air conduction threshold was 59 dB, and mean air bone gap was 45.88 dB. Hearing loss increases with increasing size of perforation. Ahmed and Rahim (1979) showed in the study that hearing loss increases with increasing the size of the perforation which was relevant in the study. After myringoplasty post-operative mean air bone gap was 21.24 dB in small size, 21.74 dB in medium sized and 24 dB in large size. From the record improvement of mean air bone gap or hearing gain was 5.24 dB in small size perforation respectively. The different of air bone gap closure between small and medium size perforation was statistically significant by unpaired’ test. Conclusion: Hearing gain after myringoplasty is better in large size perforation. Bangladesh J Otorhinolaryngol; April 2019; 25(1): 54-59

Vibration Transmissibility on Foot during Controlling and Operating Car Accelerator Pedal

2013 ◽  
Vol 471 ◽  
pp. 151-155
Author(s):  
A.R. Yusoff ◽  
Baba M. Deros ◽  
D.D.I Daruis
Keyword(s):  
Lower Extremity ◽  
Medium Size ◽  
Accelerator Pedal ◽  
Vehicle Engine ◽  
Large Size ◽  
Honestly Significant Difference ◽  
Significant Difference ◽  
Vibration Transmissibility ◽  
Post Hoc ◽  
The Relationship

The purpose of this paper is to discuss the vibration transmissibility from a cars body to pedal-pad, and the lower extremity, especially on the foot. The vibration transmissibility will occur when the foot interacts with the pedal-pad once the vehicle engine is turned on. The vibrations transmissibility will cause drivers discomfort, especially on the lower extremity due to fatigue and tiredness of the foot. The relationship between vibration transmissibility with the different sizes pedal-pad to the foot, and whether it can contribute to the foot discomfort during handling and controlling pedal-pad while driving is investigated. The variables are the different sizes of pedal-pad. Data was recorded from foot on three different sizes of pedal-pads. The data was measured in root mean square (r.m.s) unit, of the frequency weighted acceleration (m/s2) for every minute. The result for the foot-transmitted-vibration shows the ratio value of medium sized pedal-pad is greater than 1; compared to small sized and large sized pedal-pads which is less than 1. Analysis of One-way Anova shows that the mean of different sizes of pedal-pad is significant. Tukeyspost-hocwith HSD (Honestly Significant Difference) test on the foot transmitted-vibration proves that the means for medium size pedal-pad is the highest compared with the small and large size pedal-pads.

Diet, feeding behaviour and habitat utilisation of the blue stingray Dasyatis chrysonota (Smith, 1828) in South African waters

2003 ◽  
Vol 54 (8) ◽  
pp. 957 ◽  
Author(s):  
David A. Ebert ◽  
Paul D. Cowley
Keyword(s):  
Surf Zone ◽  
Stomach Contents ◽  
Size Class ◽  
Behaviour Pattern ◽  
Medium Size ◽  
Secondary Importance ◽  
Size Classes ◽  
Important Prey ◽  
Large Size ◽  
Large Size Class

Analysis of stomach contents for Dasyatis chrysonota revealed that diet varied with size and habitat. The diet of all size classes in the surf zone was comprised primarily of Callianassa spp., Donax spp. and unidentified polychaete species. The medium and large size classes fed primarily on Donax spp., whereas the very large size class fed mainly on Callianassa spp. Polychaetes were of secondary importance as prey for the medium size class. The diet of D. chrysonota in the nearshore zone consisted mainly of Balanoglossus capensis and Callianassa spp. Balanoglossus capensis decreased from an index of relative importance (IRI) of 75.3% for the medium size class to 59.9% for the very large size class, whereas Callianassa spp. increased from 22.8% to 39.4% between the medium and the very large size classes. The offshore zone was the only area in which small size class D. chrysonota were caught. The diet of these small D. chrysonota was primarily polychaetes and amphipods. Polychaetes increased in importance in the medium size class, but declined in each successively larger size class. Conversely, Pterygosquilla armata capensis became the single most important prey item for the very large size class, comprising an IRI of 50.9%. The behaviour pattern used by D. chrysonota to locate and extract prey is described.

scholarly journals Implementation of Lean Manufacturing in Saudi Manufacturing Organisations: An Empirical Study

2011 ◽  
Vol 339 ◽  
pp. 250-253 ◽  
Author(s):  
M. Azharul Karim ◽  
Mubarak Aljuhani ◽  
Ray Duplock ◽  
Prasad Yarlagadda
Keyword(s):  
Saudi Arabia ◽  
Lean Manufacturing ◽  
Organization Culture ◽  
Medium Size ◽  
Maintenance Optimization ◽  
Manufacturing Companies ◽  
Skilled Workers ◽  
Planning Systems ◽  
Large Size ◽  
Management Commitment

Abstract: In this paper, the level of lean manufacturing implementation by Saudi manufacturing companies is investigated, the extent of application of lean manufacturing practice is identified and the benefits and barriers of Lean implementation are evaluated. The results reported in this paper are based on data collected from a survey using a standard questionnaire administered to 120 manufacturers in Saudi Arabia. Evidence indicates that large size companies are more likely to implement and gain the advantages of lean manufacturing than small and medium size companies. The most implemented lean manufacturing tools are Computerized Planning Systems, TQM, Maintenance Optimization and CIP. Main barriers against lean manufacturing implementation include the organization culture, lack of management commitment and lack of skilled workers. Results also show that benefits gained from lean manufacturing implementation are significant and are correlated with the level of implementation of lean strategies.

scholarly journals Statistical Analyses of Satellite Cloud Object Data from CERES. Part III: Comparison with Cloud-Resolving Model Simulations of Tropical Convective Clouds

2007 ◽  
Vol 64 (3) ◽  
pp. 762-785 ◽  
Author(s):  
Yali Luo ◽  
Kuan-Man Xu ◽  
Bruce A. Wielicki ◽  
Takmeng Wong ◽  
Zachary A. Eitzen
Keyword(s):  
Physical Properties ◽  
Optical Depth ◽  
Weather Prediction ◽  
Cloud Microphysics ◽  
Retrieval Algorithm ◽  
Medium Size ◽  
Size Category ◽  
Cloud Optical Depth ◽  
Large Size ◽  
Cloud Resolving Model

Abstract The present study evaluates the ability of a cloud-resolving model (CRM) to simulate the physical properties of tropical deep convective cloud objects identified from a Clouds and the Earth’s Radiant Energy System (CERES) data product. The emphasis of this study is the comparisons among the small-, medium-, and large-size categories of cloud objects observed during March 1998 and between the large-size categories of cloud objects observed during March 1998 (strong El Niño) and March 2000 (weak La Niña). Results from the CRM simulations are analyzed in a way that is consistent with the CERES retrieval algorithm and they are averaged to match the scale of the CERES satellite footprints. Cloud physical properties are analyzed in terms of their summary histograms for each category. It is found that there is a general agreement in the overall shapes of all cloud physical properties between the simulated and observed distributions. Each cloud physical property produced by the CRM also exhibits different degrees of disagreement with observations over different ranges of the property. The simulated cloud tops are generally too high and cloud-top temperatures are too low except for the large-size category of March 1998. The probability densities of the simulated top-of-the-atmosphere (TOA) albedos for all four categories are underestimated for high albedos, while those of cloud optical depth are overestimated at its lowest bin. These disagreements are mainly related to uncertainties in the cloud microphysics parameterization and inputs such as cloud ice effective size to the radiation calculation. Summary histograms of cloud optical depth and TOA albedo from the CRM simulations of the large-size category of cloud objects do not differ significantly between the March 1998 and 2000 periods, consistent with the CERES observations. However, the CRM is unable to reproduce the significant differences in the observed cloud-top height while it overestimates the differences in the observed outgoing longwave radiation and cloud-top temperature between the two periods. Comparisons between the CRM results and the observations for most parameters in March 1998 consistently show that both the simulations and observations have larger differences between the large- and small-size categories than between the large- and medium-size, or between the medium- and small-size categories. However, the simulated cloud properties do not change as much with size as observed. These disagreements are likely related to the spatial averaging of the forcing data and the mismatch in time and space between the numerical weather prediction model from which the forcing data are produced and the CERES observed cloud systems.

scholarly journals The genetics of postzygotic isolation in the Drosophila virilis group.

Genetics ◽  
1989 ◽  
Vol 121 (3) ◽  
pp. 527-537 ◽  
Author(s):  
H A Orr ◽  
J A Coyne
Keyword(s):  
Reproductive Isolation ◽  
X Chromosome ◽  
Related Species ◽  
Hybrid Sterility ◽  
Drosophila Virilis ◽  
Female Sterility ◽  
Postzygotic Isolation ◽  
Male And Female ◽  
Virilis Group ◽  
Drosophila Virilis Group

Abstract In a genetic study of postzygotic reproductive isolation among species of the Drosophila virilis group, we find that the X chromosome has the largest effect on male and female hybrid sterility and inviability. The X alone has a discernible effect on postzygotic isolation between closely related species. Hybridizations involving more distantly related species also show large X-effects, although the autosomes may also play a role. In the only hybridization yet subjected to such analysis, we show that hybrid male and female sterility result from the action of different X-linked loci. Our results accord with genetic studies of other taxa, and support the view that both Haldane's rule (heterogametic F1 sterility or inviability) and the large effect of the X chromosome on reproductive isolation result from the accumulation by natural selection of partially recessive or underdominant mutations. We also describe a method that allows genetic analysis of reproductive isolation between species that produce completely sterile or inviable hybrids. Such species pairs, which represent the final stage of speciation, cannot be analyzed by traditional methods. The X chromosome also plays an important role in postzygotic isolation between these species.

Sign in / Sign up

Export Citation Format

Share Document