Kinetics and Microstructure of Transiently Annealed Implanted Polycrystalline Silicon Layers

1989 ◽  
Vol 157 ◽  
Author(s):  
J.M.C. England ◽  
P.J. Timans ◽  
R.A. Mcmahon ◽  
H. Ahmed ◽  
C. Hill ◽  
...  
Keyword(s):  
Grain Size ◽  
Polycrystalline Silicon ◽  
Annealing Temperature ◽  
Solid Phase ◽  
Interface Roughness ◽  
Cross Sectional ◽  
Time Resolved ◽  
Microstructural Changes ◽  
Transmission Electron

ABSTRACTMicrostructural changes occurring during the early stages of rapid thermal annealing of polycrystalline silicon bipolar emitters crucially affect the final dopant distribution and hence the performance of these devices. The first stage of annealing is epitaxial regrowth in the solid phase of the layer amorphised by the implantation. In-situ studies using time-resolved reflectivity measurements, combined with cross-sectional transmission electron microscopy of partly annealed structures, have determined the effects of initial grain size, annealing temperature and amorphising species (Si or As) on the rate of regrowth and the microstructural changes which occur during annealing. As the grain size is reduced, the regrowth rate decreases and the interface roughness increases. Arsenic implantation alters the rate of regrowth in such a manner as to produce a smoother interface than that in silicon implanted material.

In Situ Analysis of magnetic and Structural Properties of Epitaxial and Polycrystalline Ni80Fe20 Thin Films

1993 ◽  
Vol 313 ◽  
Author(s):  
I. Hashim ◽  
H.A. Atwater ◽  
Thomas J. Watson
Keyword(s):  
Magnetic Properties ◽  
Kerr Effect ◽  
High Energy ◽  
Epitaxial Films ◽  
Interface Roughness ◽  
Ex Situ ◽  
X Ray Diffraction ◽  
Cross Sectional ◽  
Transmission Electron

ABSTRACTWe have investigated structural and magnetic properties of epitaxial Ni80Fe20 films grown on relaxed epitaxial Cu/Si (001) films. The crystallographic texture of these films was analyzed in situ by reflection high energy electron diffraction (RHEED), and ex situ by x-ray diffraction and cross-sectional transmission electron Microscopy (XTEM). In particular, RHEED intensities were recorded during epitaxial growth, and intensity profiles across Bragg rods were used to calculate the surface lattice constant, and hence, find the critical epitaxial thickness for which Ni80Fe20 grows pseudomorphically on Cu (100). XTEM analysis indicated that the epitaxial films had atomically-abrupt interfaces which was not the case for polycrystalline Cu and Ni80Fe20 film interfaces. The Magnetic properties of these epitaxial films were Measured in situ using Magneto-optic Kerr effect magnetometry and were compared with those of polycrystalline films grown on SiO2/Si. Large Hc (∼ 35 Oe) was observed for epitaxial Ni80Fe20 films less than 3.0 nm thick whereas for increasing thickness, Hc decreased approximately monotonically to a few Oersteds. Correlations were made between magnetic properties of these epitaxial films, the strain in the film and the interface roughness obtained from XTEM analysis.

scholarly journals Effect of Non-Hydrostatic Stress on Kinetics and Interfacial Roughness During Solid Phase Epitaxial Growth in Si

1996 ◽  
Vol 441 ◽  
Author(s):  
William Barvosa-Carter ◽  
Michael J. Aziz
Keyword(s):  
Growth Rate ◽  
Epitaxial Growth ◽  
Uniaxial Compression ◽  
Solid Phase ◽  
Hydrostatic Stress ◽  
Uniaxial Stress ◽  
Cross Sectional ◽  
Time Resolved ◽  
Crystal Interface

AbstractWe report preliminary in-situ time-resolved measurements of the effect of uniaxial stress on solid phase epitaxial growth in pure Si (001) for the case of stress applied parallel to the amorphous-crystal interface. The growth rate is reduced by the application of uniaxial compression, in agreement with previous results. Additionally, the velocity continues to decrease with time. This is consistent with interfacial roughening during growth under stress, and is supported by both reflectivity measurements and cross-sectional TEM observations. We present a new kinetically-driven interfacial roughening mechanism which is consistent with our observations.

Crystallization Kinetics of Fe-DOPED A1203

1994 ◽  
Vol 357 ◽  
Author(s):  
Todd W. Simpson ◽  
Ian V. Mitchell ◽  
Ning Yu ◽  
Michael Nastasi ◽  
Paul C. Mcintyre
Keyword(s):  
Crystallization Kinetics ◽  
Annealing Temperature ◽  
Rutherford Backscattering Spectrometry ◽  
Solid Phase ◽  
Solid Phase Epitaxy ◽  
Time Resolved ◽  
Α Phase ◽  
Kinetics Of ◽  
Beam Deposition

AbstractTime resolved optical reflectivity (TRR) and Rutherford backscattering spectrometry (RBS) and ion channelling methods have been applied to determine the crystallization kinetics of Fe-doped A1203 in the temperature range of 900-1050°C. Amorphous A1203 films, approximately 250 nm thick and with Fe cation concentrations of 0, 1.85, 2.2 and 4.5%, were formed by e-beam deposition on single crystal, [0001] oriented, A1203 substrates. Annealing was performed under an oxygen ambient in a conventional tube furnace, and the optical changes which accompany crystallization were monitored, in situ, by TRR with a 633nm wavelength laser.Crystallization is observed to proceed via solid phase epitaxy. An intermediate, epitaxial phase of -γ-Al203 is formed before the samples reach the ultimate annealing temperature. The 5% Fe-doped film transforms from γ to α-A1203 at a rate approximately 10 times that of the pure A1203 film and the 1.85% and 2.2% Fe-doped films transform at rates between these two extremes. The Fe-dopants occupy substitional lattice sites in the epilayer. Each of the four sets of specimens displays an activation energy in the range 5.0±0.2eV for the γ,α phase transition.

dLow Temperature of formation of Nickel Germanide by reaction of Nickel and Crystalline Germanium

2014 ◽  
Vol 1655 ◽  
Author(s):  
Fahid Algahtani ◽  
Patrick W Leech ◽  
Geoffrey K Reeves ◽  
Anthony S Holland ◽  
Mark Blackford ◽  
...  
Keyword(s):  
Low Temperatures ◽  
Annealing Temperature ◽  
X Ray Diffraction ◽  
Cross Sectional ◽  
Thermal Budget ◽  
X Ray ◽  
Transmission Electron ◽  
Van Der Pauw ◽  
Heated Stage

ABSTRACTThe formation of nickel germanide has been examined over a range of low temperatures (200-400 °C) in an attempt to minimize the thermal budget for the process. Cross-sectional Transmission Electron Microscopy (TEM) was used to determine the texture of the germanide layer and the morphology and constituent composition of the Ge/NiGe interface. The onset and completion of reaction between Ni and Ge were identified by means of a heated stage in combination with in-situ x-ray diffraction (XRD) measurements. The stages of reaction were also monitored using measurements of sheet resistance of the germanides by the Van der Pauw technique. The results have shown that the minimum temperature for the initiation of reaction of Ni and Ge to form NiGe was 225 °C. However, an annealing temperature > 275 °C was necessary for the extensive (and practical) formation of NiGe. Between 200 and 300 °C, the duration of annealing required for the formation of NiGe was significantly longer than at higher temperatures. The stoichiometry of the germanide was very close to NiGe (1:1) as determined using energy dispersive spectroscopy (EDS).

In Situ Tem Study of Reactions in Iron/amorphous Carbon Layered Thin Films

1995 ◽  
Vol 382 ◽  
Author(s):  
Toshio Itoh ◽  
Robert Sinclair
Keyword(s):  
Grain Size ◽  
Amorphous Carbon ◽  
Layered Structure ◽  
Annealing Temperature ◽  
In Situ Tem ◽  
Dc Sputtering ◽  
Transmission Electron ◽  
Average Grain Size ◽  
Deposited Films

ABSTRACTReactions between Fe and amorphous carbon (a-C) below 600ºC have been investigated. In situ annealing in a transmission electron microscopy (TEM) was performed on a-C/Fe/a-C trilayer films deposited by DC sputtering. As-deposited films showed a well defined tri-layered structure and an average Fe grain size of about 50Å. Cementite (Fe3C) grains appeared in the Fe layer by annealing around 300ºC. As the annealing temperature was raised, the number and size of the cementite grains increased. When the annealing temperature reached 500ºC, the Fe layer completely turned into cementite with an average grain size of 1000Å. At this point the film still kept a well defined tri-layered structure even though some parts of the cementitelayer agglomerated. Above 500ºC, the cementite layer started to “move” into the a-C leaving graphite behind. Graphite formed in this process is strongly textured with the (0002) graphite basal planes parallel to the surface of the moving cementite. This process is concluded to be carbide mediated crystallization of a-C, similar to silicide mediated crystallization of silicon in Ni-Si and Pd-Si systems.

Interface Stability During Solid Phase Epitaxy Of Strained GexS1-x Films on Si (100)

1993 ◽  
Vol 321 ◽  
Author(s):  
Xiaobiao Zeng ◽  
Tan-Chen Lee ◽  
John Silcox ◽  
Michael O. Thompson
Keyword(s):  
Ion Implantation ◽  
Solid Phase ◽  
Interface Roughness ◽  
Final Thickness ◽  
Time Resolved ◽  
Transmission Electron ◽  
Interface Roughening ◽  
20 Nm ◽  
Anneal Temperature ◽  
Si Ion Implantation

ABSTRACTStrained solid phase epitaxial (SPE) regrowth of amorphous GexSi1-x on Si (100) substrates was studied using time-resolved reflectivity (TRR). Films of CVD-grown Ge0.13Si0.87 on Si were amorphized by Si ion implantation, and subsequently regrown at temperatures between 550°C and 610°. Information on regrowth dynamics and interface roughness evolution was obtained by accurately modeling the complicated TRR data for GexSi1-x regrowth using a Moving, statistically roughening interface. The SPE regrowth rate slowed as the interface crossed into the GexSi1-x layer and the originally planar interface roughened, as confirmed by transmission electron Microscopy. A Minimum in the regrowth velocity was observed after regrowing approximately 60 nm into the GexSi1-x layer; the SPE rate subsequently increased to a final, thickness-dependent velocity that was still below that for pure Si. Upon entering the GexSi1-x layer, the interface roughened quickly to a 15–20 nm amplitude, increasing only slightly more during the remainder of regrowth. The degree of roughening and velocity reduction was found to be dependent on the anneal temperature. In contrast, samples with low Ge concentrations (< 3 at.%) prepared by ion implantation exhibited minimal interface roughening and essentially identical SPE velocities as pure Si.

FORMATION OF SILICON NANOCRYSTALS AND INTERFACE ISLANDS IN SYNCHROTRON-RADIATION-IRRADIATED SiO2 FILMS ON Si(100)

2001 ◽  
Vol 15 (28n30) ◽  
pp. 3749-3752 ◽  
Author(s):  
H. AKAZAWA
Keyword(s):  
Vacuum Ultraviolet ◽  
Solid Phase ◽  
Average Diameter ◽  
High Energy ◽  
Cross Sectional ◽  
Reflectivity Measurement ◽  
Transmission Electron ◽  
Atomically Flat ◽  
Nanocrystalline Si

Nucleation of nanocrystalline Si (nc-Si) in SiO 2 films irradiated with vacuum ultraviolet and soft x-ray radiation has been investigated by using in-situ spectroscopic ellipsometry, cross-sectional transmission electron microscopy, reflectivity measurement, and reflection high-energy electron diffraction. The formation of nc-Si proceeds in the repetition of two steps: (i) conversion of SiO 2 to SiO x through the creation of Frenkel pairs and the subsequent desorption of O 2, and (ii) separation of SiO x into Si and SiO 2 domains. The average diameter of nc-Si increases from 2 to 10 nm as the irradiation temperature increases from 470°C to 610°C. Above 700°C, oxide domains are gone and solid-phase recrystallization produces Si islands terminated by the Si(100) substrate interface. At temperatures higher than 800°C, these islands collapse and an atomically flat Si(100) interface appears.

Dynamic studies of silicide-mediated crystallization of amorphous silicon

1992 ◽  
Vol 50 (2) ◽  
pp. 1352-1353
Author(s):  
C. Hayzelden ◽  
J. L. Batstone
Keyword(s):  
Ion Implantation ◽  
Solid Phase ◽  
Metallic Phase ◽  
Single Crystal Substrate ◽  
Free Electrons ◽  
Melt Temperature ◽  
Transmission Electron ◽  
Crystal Substrate ◽  
High Resolution Tem

Epitaxial reordering of amorphous Si(a-Si) on an underlying single-crystal substrate occurs well below the melt temperature by the process of solid phase epitaxial growth (SPEG). Growth of crystalline Si(c-Si) is known to be enhanced by the presence of small amounts of a metallic phase, presumably due to an interaction of the free electrons of the metal with the covalent Si bonds near the growing interface. Ion implantation of Ni was shown to lower the crystallization temperature of an a-Si thin film by approximately 200°C. Using in situ transmission electron microscopy (TEM), precipitates of NiSi2 formed within the a-Si film during annealing, were observed to migrate, leaving a trail of epitaxial c-Si. High resolution TEM revealed an epitaxial NiSi2/Si(l11) interface which was Type A. We discuss here the enhanced nucleation of c-Si and subsequent silicide-mediated SPEG of Ni-implanted a-Si.Thin films of a-Si, 950 Å thick, were deposited onto Si(100) wafers capped with 1000Å of a-SiO2. Ion implantation produced sharply peaked Ni concentrations of 4×l020 and 2×l021 ions cm−3, in the center of the films.

A New Method of Wafer Level Plan View TEM Sample Preparation by DualBeam

2008 ◽  
Author(s):  
Hyoung H. Kang ◽  
Michael A. Gribelyuk ◽  
Oliver D. Patterson ◽  
Steven B. Herschbein ◽  
Corey Senowitz
Keyword(s):  
Sample Preparation ◽  
Ex Situ ◽  
Wafer Level ◽  
Cross Sectional ◽  
Plan View ◽  
Manufacturing Line ◽  
Transmission Electron ◽  
Thin Lamella ◽  
Preparation Techniques

Abstract Cross-sectional style transmission electron microscopy (TEM) sample preparation techniques by DualBeam (SEM/FIB) systems are widely used in both laboratory and manufacturing lines with either in-situ or ex-situ lift out methods. By contrast, however, the plan view TEM sample has only been prepared in the laboratory environment, and only after breaking the wafer. This paper introduces a novel methodology for in-line, plan view TEM sample preparation at the 300mm wafer level that does not require breaking the wafer. It also presents the benefit of the technique on electrically short defects. The methodology of thin lamella TEM sample preparation for plan view work in two different tool configurations is also presented. The detailed procedure of thin lamella sample preparation is also described. In-line, full wafer plan view (S)TEM provides a quick turn around solution for defect analysis in the manufacturing line.

Growth of Epitaxial IrSi3 Layers on Si(111)

1989 ◽  
Vol 160 ◽  
Author(s):  
T. L. Lin ◽  
C. W. Nieh
Keyword(s):  
Surface Morphology ◽  
Molecular Beam ◽  
Solid Phase ◽  
Single Mode ◽  
Growth Conditions ◽  
Tem Analysis ◽  
Mbe Growth ◽  
Good Surface ◽  
Transmission Electron

AbstractEpitaxial IrSi3 films have been grown on Si (111) by molecular beam epitaxy (MBE) at temperatures ranging from 630 to 800 °C and by solid phase epitaxy (SPE) at 500 °C. Good surface morphology was observed for IrSi3 layers grown by MBE at temperatures below 680 °C, and an increasing tendency to form islands is noted in samples grown at higher temperatures. Transmission electron microscopy (TEM) analysis reveals that the IrSi3 layers grow epitaxially on Si(111) with three epitaxial modes depending on the growth conditions. For IrSi3 layers grown by MBE at 630 °C, two epitaxial modes were observed with ~ 50% area coverage for each mode. Single mode epitaxial growth was achieved at a higher MBE growth temperature, but with island formation in the IrSi3 layer. A template technique was used with MBE to improve the IrSi3 surface morphology at higher growth temperatures. Furthermore, single-crystal IrSi3 was grown on Si(111) at 500 °C by SPE, with annealing performed in-situ in a TEM chamber.

Sign in / Sign up

Export Citation Format

Share Document