Fabrication of Periodic Arrays of Nanoscale Square Helices

2002 ◽  
Vol 728 ◽  
Author(s):  
Martin O. Jensen ◽  
Scott R. Kennedy ◽  
Michael J. Brett
Keyword(s):  
Photonic Band Gap ◽  
Substrate Surface ◽  
Three Dimensional ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Inorganic Materials ◽  
Periodic Arrays ◽  
Wide Range ◽  
Potential Applications ◽  
Third Dimension

AbstractWe demonstrate fabrication of periodic arrays of nanometre scale square helices, with potential applications in three-dimensional photonic bandgap (PBG) materials. Processing is performed using a thin film deposition method known as Glancing Angle Deposition (GLAD). Through advanced substrate motion, this technique allows for controlled growth of square helices in a variety of inorganic materials. Organization of the helices into periodic twodimensional geometries is achieved by prepatterning the substrate surface using electron beam lithography. The regular turns of the helices yield periodicity in the third dimension, perpendicular to the substrate. We present studies of tetragonal and trigonal arrays of silicon helices, with lattice constants as low as 300 nm. By deliberately adding or leaving out seeds in the substrate pattern, we have succeeded in engineering line defects. Our periodic nanoscale structure closely matches an ideal photonic band gap architecture, as recently proposed by Toader and John. While our fabrication technique is simpler than most suggested PBG schemes, it is highly versatile. A wide range of materials can be used for GLAD, manipulation of lattice constant and helix pitch ensures optical tunability, and the GLAD films are robust to micromachining.

scholarly journals Electroplated Functional Materials with 3D Nanostructures Defined by Advanced Optical Lithography and Their Emerging Applications

2020 ◽  
Vol 10 (24) ◽  
pp. 8780
Author(s):  
Jinseong Ahn ◽  
Seokkyoon Hong ◽  
Young-Seok Shim ◽  
Junyong Park
Keyword(s):  
Structural Damage ◽  
Low Cost ◽  
Three Dimensional ◽  
Functional Materials ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Inorganic Materials ◽  
Energy Storage Devices ◽  
Treatment Technology ◽  
Periodic Nanostructures

Electroplating has been favored to date as a surface treatment technology in various industries in the development of semiconductors, automobiles, ships, and steel due to its advantages of being a simple, solution-based process, with low cost and high throughput. Recently, classical electroplating has been reborn as an advanced manufacturing process for functional materials by combining it with unconventional optical three-dimensional (3D) nanofabrication techniques capable of generating polymer templates with high-resolution 3D periodic nanostructures. The bottom-up filling behavior of electroplating rising from a seed layer makes it possible to densely fill the nanoporous network of the template with heterogeneous inorganic materials. At this time, understanding and optimizing the process parameters (e.g., additive, current density, type of current waveform, etc.) of electroplating is critical for defect control. In addition, since electroplating is generally performed near room temperature, unlike other thin film deposition techniques, structural damage to the polymer template by heat during electroplating is almost negligible. Based on the excellent compatibility of electroplating and optical 3D nanofabrication, innovative functional materials with 3D periodic nanostructures targeting electrochemical or energy-related applications have been created. In this mini review, a strategy for producing functional materials with 3D periodic nanostructures through a templating process will be covered, and the recent cases of successful applications to electrodes for energy storage devices, electrocatalysts, and thermoelectric materials will be summarized. We will also discuss technical issues that need to be considered in the process to improve the quality of the resulting functional materials with 3D nanoarchitectures.

Observations on the growth of YBa2Cu3O7-δ thin films on MgO by pulsed-laser ablation

1991 ◽  
Vol 49 ◽  
pp. 1068-1069
Author(s):  
M. Grant Norton ◽  
C. Barry Carter
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Laser Ablation ◽  
Substrate Surface ◽  
Pulsed Laser ◽  
Pulsed Laser Ablation ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Laser Ablation Process ◽  
Deposition Parameters

Pulsed-laser ablation has been widely used to produce high-quality thin films of YBa2Cu3O7-δ on a range of substrate materials. The nonequilibrium nature of the process allows congruent deposition of oxides with complex stoichiometrics. In the high power density regime produced by the UV excimer lasers the ablated species includes a mixture of neutral atoms, molecules and ions. All these species play an important role in thin-film deposition. However, changes in the deposition parameters have been shown to affect the microstructure of thin YBa2Cu3O7-δ films. The formation of metastable configurations is possible because at the low substrate temperatures used, only shortrange rearrangement on the substrate surface can occur. The parameters associated directly with the laser ablation process, those determining the nature of the process, e g. thermal or nonthermal volatilization, have been classified as ‘primary parameters'. Other parameters may also affect the microstructure of the thin film. In this paper, the effects of these ‘secondary parameters' on the microstructure of YBa2Cu3O7-δ films will be discussed. Examples of 'secondary parameters' include the substrate temperature and the oxygen partial pressure during deposition.

scholarly journals Progresses on the Use of Two-Photon Absorption Laser Induced Fluorescence (TALIF) Diagnostics for Measuring Absolute Atomic Densities in Plasmas and Flames

Plasma ◽  
2021 ◽  
Vol 4 (1) ◽  
pp. 145-171
Author(s):  
Kristaq Gazeli ◽  
Guillaume Lombardi ◽  
Xavier Aubert ◽  
Corinne Y. Duluard ◽  
Swaminathan Prasanna ◽  
...  
Keyword(s):  
Optical Transition ◽  
Thin Film Deposition ◽  
Laser Induced Fluorescence ◽  
Film Deposition ◽  
Stimulated Emission ◽  
Photon Absorption ◽  
Collisional Quenching ◽  
Two Photon Absorption ◽  
Two Photon ◽  
Wide Range

Recent developments in plasma science and technology have opened new areas of research both for fundamental purposes (e.g., description of key physical phenomena involved in laboratory plasmas) and novel applications (material synthesis, microelectronics, thin film deposition, biomedicine, environment, flow control, to name a few). With the increasing availability of advanced optical diagnostics (fast framing imaging, gas flow visualization, emission/absorption spectroscopy, etc.), a better understanding of the physicochemical processes taking place in different electrical discharges has been achieved. In this direction, the implementation of fast (ns) and ultrafast (ps and fs) lasers has been essential for the precise determination of the electron density and temperature, the axial and radial gradients of electric fields, the gas temperature, and the absolute density of ground-state reactive atoms and molecules in non-equilibrium plasmas. For those species, the use of laser-based spectroscopy has led to their in situ quantification with high temporal and spatial resolution, with excellent sensitivity. The present review is dedicated to the advances of two-photon absorption laser induced fluorescence (TALIF) techniques for the measurement of reactive species densities (particularly atoms such as N, H and O) in a wide range of pressures in plasmas and flames. The requirements for the appropriate implementation of TALIF techniques as well as their fundamental principles are presented based on representative published works. The limitations on the density determination imposed by different factors are also discussed. These may refer to the increasing pressure of the probed medium (leading to a significant collisional quenching of excited states), and other issues originating in the high instantaneous power density of the lasers used (such as photodissociation, amplified stimulated emission, and photoionization, resulting to the saturation of the optical transition of interest).

scholarly journals Laser-Induced Deposition of Plasmonic Ag and Pt Nanoparticles, and Periodic Arrays

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 10
Author(s):  
Daria V. Mamonova ◽  
Anna A. Vasileva ◽  
Yuri V. Petrov ◽  
Denis V. Danilov ◽  
Ilya E. Kolesnikov ◽  
...  
Keyword(s):  
Substrate Surface ◽  
Pt Nanoparticles ◽  
Single Step ◽  
X Ray Diffraction ◽  
Ag Nps ◽  
X Ray ◽  
Periodic Arrays ◽  
Potential Applications ◽  
Surface Decoration ◽  
Wide Potential

Surfaces functionalized with metal nanoparticles (NPs) are of great interest due to their wide potential applications in sensing, biomedicine, nanophotonics, etc. However, the precisely controllable decoration with plasmonic nanoparticles requires sophisticated techniques that are often multistep and complex. Here, we present a laser-induced deposition (LID) approach allowing for single-step surface decoration with NPs of controllable composition, morphology, and spatial distribution. The formation of Ag, Pt, and mixed Ag-Pt nanoparticles on a substrate surface was successfully demonstrated as a result of the LID process from commercially available precursors. The deposited nanoparticles were characterized with SEM, TEM, EDX, X-ray diffraction, and UV-VIS absorption spectroscopy, which confirmed the formation of crystalline nanoparticles of Pt (3–5 nm) and Ag (ca. 100 nm) with plasmonic properties. The advantageous features of the LID process allow us to demonstrate the spatially selective deposition of plasmonic NPs in a laser interference pattern, and thereby, the formation of periodic arrays of Ag NPs forming diffraction grating

scholarly journals Additive Manufacturing of Biopolymers for Tissue Engineering and Regenerative Medicine: An Overview, Potential Applications, Advancements, and Trends

2021 ◽  
Vol 2021 ◽  
pp. 1-20 ◽  
Author(s):  
Dhinakaran Veeman ◽  
M. Swapna Sai ◽  
P. Sureshkumar ◽  
T. Jagadeesha ◽  
L. Natrayan ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Regenerative Medicine ◽  
Tissue Regeneration ◽  
Three Dimensional ◽  
Porous Scaffolds ◽  
Wide Range ◽  
Potential Applications ◽  
Pharmaceutical Industries

As a technique of producing fabric engineering scaffolds, three-dimensional (3D) printing has tremendous possibilities. 3D printing applications are restricted to a wide range of biomaterials in the field of regenerative medicine and tissue engineering. Due to their biocompatibility, bioactiveness, and biodegradability, biopolymers such as collagen, alginate, silk fibroin, chitosan, alginate, cellulose, and starch are used in a variety of fields, including the food, biomedical, regeneration, agriculture, packaging, and pharmaceutical industries. The benefits of producing 3D-printed scaffolds are many, including the capacity to produce complicated geometries, porosity, and multicell coculture and to take growth factors into account. In particular, the additional production of biopolymers offers new options to produce 3D structures and materials with specialised patterns and properties. In the realm of tissue engineering and regenerative medicine (TERM), important progress has been accomplished; now, several state-of-the-art techniques are used to produce porous scaffolds for organ or tissue regeneration to be suited for tissue technology. Natural biopolymeric materials are often better suited for designing and manufacturing healing equipment than temporary implants and tissue regeneration materials owing to its appropriate properties and biocompatibility. The review focuses on the additive manufacturing of biopolymers with significant changes, advancements, trends, and developments in regenerative medicine and tissue engineering with potential applications.

scholarly journals Prediction and Measurement of Thermal Transport Across Interfaces Between Isotropic Solids and Graphitic Materials

2010 ◽  
Author(s):  
Pamela M. Norris ◽  
Justin L. Smoyer ◽  
John C. Duda ◽  
Patrick E. Hopkins
Keyword(s):  
Thermal Transport ◽  
Substrate Surface ◽  
Unit Length ◽  
Thermal Conductance ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Transport Models ◽  
Composite Systems ◽  
Graphene Flakes ◽  
Isotropic Solids

Due to the high intrinsic thermal conductivity of carbon allotropes, there have been many attempts to incorporate such structures into existing thermal abatement technologies. In particular, carbon nanotubes (CNTs) and graphitic materials (i.e., graphite and graphene flakes or stacks) have garnered much interest due to the combination of both their thermal and mechanical properties. However, the introduction of these carbon-based nanostructures into thermal abatement technologies greatly increases the number of interfaces per unit length within the resulting composite systems. Consequently, thermal transport in these systems is governed as much by the interfaces between the constituent materials as it is by the materials themselves. This paper reports the behavior of phononic thermal transport across interfaces between isotropic thin films and graphite substrates. Elastic and inelastic diffusive transport models are formulated to aid in the prediction of conductance at a metal-graphite interface. The temperature dependence of the thermal conductance at Au-graphite interfaces is measured via transient thermoreflectance from 78 to 400 K. It is found that different substrate surface preparations prior to thin film deposition have a significant effect on the conductance of the interface between film and substrate.

scholarly journals Biomimicry in Bio-Manufacturing: Developments in Melt Electrospinning Writing Technology Towards Hybrid Biomanufacturing

2019 ◽  
Vol 9 (17) ◽  
pp. 3540 ◽  
Author(s):  
Ferdows Afghah ◽  
Caner Dikyol ◽  
Mine Altunbek ◽  
Bahattin Koc
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Cell Attachment ◽  
Three Dimensional ◽  
Future Perspective ◽  
Melt Electrospinning ◽  
Wide Range ◽  
Challenges And Opportunities ◽  
Potential Applications ◽  
Homogeneous Cell

Melt electrospinning writing has been emerged as a promising technique in the field of tissue engineering, with the capability of fabricating controllable and highly ordered complex three-dimensional geometries from a wide range of polymers. This three-dimensional (3D) printing method can be used to fabricate scaffolds biomimicking extracellular matrix of replaced tissue with the required mechanical properties. However, controlled and homogeneous cell attachment on melt electrospun fibers is a challenge. The combination of melt electrospinning writing with other tissue engineering approaches, called hybrid biomanufacturing, has introduced new perspectives and increased its potential applications in tissue engineering. In this review, principles and key parameters, challenges, and opportunities of melt electrospinning writing, and particularly, recent approaches and materials in this field are introduced. Subsequently, hybrid biomanufacturing strategies are presented for improved biological and mechanical properties of the manufactured porous structures. An overview of the possible hybrid setups and applications, future perspective of hybrid processes, guidelines, and opportunities in different areas of tissue/organ engineering are also highlighted.

Radio frequency expanding plasmas at low, intermediate, and atmospheric pressure and their applications

2008 ◽  
Vol 80 (9) ◽  
pp. 1919-1930 ◽  
Author(s):  
Gheorghe Dinescu ◽  
Eusebiu R. Ionita
Keyword(s):  
Radio Frequency ◽  
Atmospheric Pressure ◽  
Thin Film Deposition ◽  
Plasma Jets ◽  
Film Deposition ◽  
High Mass ◽  
Rf Plasma ◽  
Temperature Sensitive ◽  
Large Size ◽  
Wide Range

We report on the operation and characteristics of radio frequency (RF) plasma beam sources based on the expansion of the discharge outside of limited spaces with small interelectrode gaps. The appropriate electrode configuration, combined with high mass flow values and appropriate power levels, leads to small- or large-size plasma jets, working stably at low, intermediate, and atmospheric pressures. The sources are promising tools for a wide range of applications in thin film deposition, surface modification, and cleaning, including the case of temperature-sensitive substrates.

Simulation of 3D Films Deposited by Glancing Angle Deposition Using 3D-Films

2000 ◽  
Vol 616 ◽  
Author(s):  
T. Smy ◽  
D. Vick ◽  
M. J. Brett ◽  
S. K. Dew ◽  
A. T. Wu ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Three Dimensional ◽  
Thin Film Deposition ◽  
Glancing Angle Deposition ◽  
Film Deposition ◽  
Porous Thin Films ◽  
Glancing Angle ◽  
Memory Resources ◽  
Angle Deposition

AbstractA new fully three dimensional (3D) ballistic deposition simulator 3D-FILMS has been developed for the modeling of thin film deposition and structure. The simulator may be implemented using the memory resources available to workstations. In order to illustrate the capabilities of 3D-FILMS, we apply it to the growth of engineered porous thin films produced by the technique of GLancing Angle Deposition (GLAD).

Simulators of Thin Film Deposition for Silicon Device Processing

1998 ◽  
Vol 514 ◽  
Author(s):  
G. H. Gilmer ◽  
F. H. Baumann ◽  
T. Diaz de la Rubia
Keyword(s):  
First Principles ◽  
Film Formation ◽  
Level Set Methods ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Tin Films ◽  
Grain Structures ◽  
Device Processing ◽  
Wide Range ◽  
Silicon Device

ABSTRACTWe discuss simulators of the deposition of metal films onto substrates containing vias and trenches. Our Monte Carlo simulations of Al are based on extensive first-principles and molecular dynamics (MD) data for atomic-level energetics and transport rates. We find that surface mobilities are highly anisotropic, and that this has a pronounced influence on film morphology. We have investigated the effects of faceting and grain boundary grooving on step coverage, together with the variation of morphology with deposition rate, temperature, and length scale. Mass transport across low index facets is extremely slow near equilibrium, and this can inhibit the smoothening of surfaces and the elimination of depressions during annealing. The MC model also predicts grain structures during polycrystalline film formation, and the generation of preferred crystallographic orientations (texture). We present MC simulations for a range of conditions, and provide comparisons with experiments on the sputter deposition of Al and TiN films. Results from the MC model are being incorporated into a continuum model based on level-set methods, and we expect that this will form the basis for a simulator that can efficiently explore a wide range of conditions.

Sign in / Sign up

Export Citation Format

Share Document