scholarly journals Analysis of PTA hardfacing with CoCrWC and CoCrMoSi alloys

2013 ◽  
Vol 18 (4) ◽  
pp. 322-328 ◽  
Author(s):  
Adriano Scheid ◽  
Ana Sofia Clímaco Monteiro de Oliveira
Keyword(s):  
Solid Solution ◽  
Alloy System ◽  
Laves Phase ◽  
X Ray Diffraction ◽  
Dendritic Microstructure ◽  
Eutectic Region ◽  
X Ray ◽  
Eutectic Carbides ◽  
Temperature Exposure ◽  
Response To Temperature

CoCrWC alloys are widely used to protect components that operate under wear and high temperature environments. Enhanced performance has been achieved with the CoCrMoSi alloys but processing this alloy system is still a challenge due to the presence of the brittle Laves phase, particularly when welding is involved. This work evaluated Plasma Transferred Arc coatings processed with the Co-based alloy CoMoCrSi - Tribaloy T400, reinforced with Laves phase, comparing its weldability to the CoCrWC - Stellite 6, reinforced with carbides. Coatings were also analyzed regarding the response to temperature exposure at 600°C for 7 days and subsequent effect on microstructure and sliding abrasive wear. Coatings characterization was carried out by light and scanning electron microscopy, X-ray diffraction and Vickers hardness. CoCrWC coatings exhibited a Cobalt solid solution dendritic microstructure and a thin interdendritic region with eutectic carbides, while CoCrMoSi deposits exhibit a large lamellar eutectic region of Laves phase and Cobalt solid solution and a small fraction of primary Laves phase. Although phase stability was observed by X-ray diffraction, coarsening of the microstructure occurred for both alloys. CoCrMoSi showed thicker lamellar Laves phase and CoCrWC coarser eutectic carbides. Coatings stability assessed by wear tests revealed that although the wear rate of the as-deposited CoCrMoSi alloy was lower than that of CoCrWC alloy its increase after temperature exposure was more significant, 22% against 15%. Results were discussed regarding the protection of industrial components in particular, bearings in 55AlZn hot dip galvanizing components.

Phase Relation and Microstructure of NbCr2 Laves Intermetallics in Ternary Nb-Cr-X Alloy Systems

1996 ◽  
Vol 460 ◽  
Author(s):  
M. Yoshida ◽  
T. Takasugi
Keyword(s):  
Solid Solution ◽  
Alloy System ◽  
X Ray Diffraction ◽  
Laves Phases ◽  
Characteristic Structure ◽  
X Ray ◽  
Intermediate Phases ◽  
Transmission Electron ◽  
Solid Solution Range ◽  
Alloy Systems

ABSTRACTThe isothermal phase diagrams of ternary alloy systems Nb-Cr-V and Nb-Cr-Mo are determined by metallography, X-ray diffraction (XRD) and transmission electron microscopy (TEM) equipped with energy dispersive X-ray (EDX). In two alloy systems, the C15 NbCr2 Laves phases are equilibrated directly with bcc solid solution without forming any intermediate phases. Relatively large amount of ternary elements V and Mo are soluble in the C15 NbCr2 Laves phases. It is shown that the C15 Laves phases extend along directions so that V occupies Cr site while Mo occupies Nb site. Also, characteristic structure containing micro twins and stacking faults is observed in the C15 Laves phase alloyed with Mo. Bcc phase has a wider solid solution range in the X(=V and Mo)-rich side than the Nb-rich and Cr-rich sides. A variety of duplex microstructures are observed depending on alloy system and alloy composition.

scholarly journals Irregular Electrodeposition of Cu-Sn Alloy Coatings in [EMIM]Cl Outside the Glove Box with Large Layer Thickness

Coatings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 310
Author(s):  
Lars Lehmann ◽  
Dominik Höhlich ◽  
Thomas Mehner ◽  
Thomas Lampke
Keyword(s):  
Layer Thickness ◽  
Alloy System ◽  
Liquid Solution ◽  
Complexing Agents ◽  
X Ray Diffraction ◽  
X Ray ◽  
Argon Stream ◽  
Ionic Liquid Solution ◽  
The Relationship ◽  
Layer Composition

Thick Cu−Sn alloy layers were produced in an [EMIM]Cl ionic-liquid solution from CuCl2 and SnCl2 in different ratios. All work, including the electrodeposition, took place outside the glovebox with a continuous argon stream over the electrolyte at 95 °C. The layer composition and layer thickness can be adjusted by the variation of the metal-salts content in the electrolyte. A layer with a thickness of up to 15 µm and a copper content of up to ωCu = 0.86 was obtained. The phase composition was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray fluorescence (XRF). Furthermore, it was found that the relationship between the alloy composition and the concentration of the ions in the electrolyte is described as an irregular alloy system as according to Brenner. Brenner described such systems only for aqueous electrolytes containing complexing agents such as cyanide. In this work, it was confirmed that irregular alloy depositions also occur in [EMIM]Cl.

scholarly journals Synthesis of Ce1−xPdxO2−δ Solid Solution in Molten Nitrate

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 640
Author(s):  
Hideaki Sasaki ◽  
Keisuke Sakamoto ◽  
Masami Mori ◽  
Tatsuaki Sakamoto
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Solid Solutions ◽  
Photoelectron Spectroscopy ◽  
Synthesis Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Co Precipitation ◽  
Ionic States

CeO2-based solid solutions in which Pd partially substitutes for Ce attract considerable attention, owing to their high catalytic performances. In this study, the solid solution (Ce1−xPdxO2−δ) with a high Pd content (x ~ 0.2) was synthesized through co-precipitation under oxidative conditions using molten nitrate, and its structure and thermal decomposition were examined. The characteristics of the solid solution, such as the change in a lattice constant, inhibition of sintering, and ionic states, were examined using X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM−EDS), transmission electron microscopy (TEM)−EDS, and X-ray photoelectron spectroscopy (XPS). The synthesis method proposed in this study appears suitable for the easy preparation of CeO2 solid solutions with a high Pd content.

scholarly journals Structural and Raman Vibrational Studies ofCeO2-Bi2O3Oxide System

2009 ◽  
Vol 2009 ◽  
pp. 1-4 ◽  
Author(s):  
L. Bourja ◽  
B. Bakiz ◽  
A. Benlhachemi ◽  
M. Ezahri ◽  
J. C. Valmalette ◽  
...  
Keyword(s):  
Solid Solution ◽  
Raman Spectroscopy ◽  
Phase Changes ◽  
Phase System ◽  
X Ray Diffraction ◽  
X Ray ◽  
Vibrational Studies ◽  
Coprecipitation Route

A series of ceramics samples belonging to theCeO2-Bi2O3phase system have been prepared via a coprecipitation route. The crystallized phases were obtained by heating the solid precursors at600∘Cfor 6 hours, then quenching the samples. X-ray diffraction analyses show that forx<0.20a solid solutionCe1−xBixO2−x/2with fluorine structure is formed. For x ranging between 0.25 and 0.7, a tetragonalβ′phase coexisting with the FCC solid solution is observed. For x ranging between 0.8 and 0.9, a new tetragonalβphase appears. Theβ′phase is postulated to be a superstructure of theβphase. Finally, close tox=1, the classical monoclinicα Bi2O3structure is observed. Raman spectroscopy confirms the existence of the phase changes as x varies between 0 and 1.

Microstructure and wear resistance of Cuss-toughened Cr5Si3/CrSi metal silicide alloys

2005 ◽  
Vol 20 (5) ◽  
pp. 1122-1130 ◽  
Author(s):  
Y.X. Yin ◽  
H.M. Wang
Keyword(s):  
Solid Solution ◽  
Wear Resistance ◽  
Sliding Wear ◽  
Room Temperature ◽  
Wear Test ◽  
Melting Process ◽  
Dry Sliding Wear ◽  
Metal Silicide ◽  
X Ray Diffraction ◽  
X Ray

Wear-resistant Cu-based solid-solution-toughened Cr5Si3/CrSi metal silicide alloy with a microstructure consisting of predominantly the dual-phase primary dendrites with a Cr5Si3 core encapsulated by CrSi phase and a small amount of interdendritic Cu-based solid solution (Cuss) was designed and fabricated by the laser melting process using Cr–Si–Cu elemental powder blends as the precursor materials. The microstructure of the Cuss-toughened Cr5Si3/CrSi metal silicide alloy was characterized by optical microscopy, powder x-ray diffraction, and energy dispersive spectroscopy. The Cuss-toughened silicide alloys have excellent wear resistance and low coefficient of friction under room temperature dry sliding wear test conditions with hardened 0.45% C carbon steel as the sliding–mating counterpart.

Deposition of TRISO Particles With Superhard SiC Coatings and the Characterization of Anisotropy by Raman Spectroscopy

2009 ◽  
Vol 131 (4) ◽  
Author(s):  
E. López-Honorato ◽  
P. J. Meadows ◽  
J. Tan ◽  
Y. Xiang ◽  
P. Xiao
Keyword(s):  
Solid Solution ◽  
Raman Spectroscopy ◽  
Pyrolytic Carbon ◽  
X Ray Diffraction ◽  
X Ray ◽  
Flat Substrate ◽  
High Concentrations ◽  
Triso Particles ◽  
Sic Coatings

In this work we have deposited silicon carbide (SiC) at 1300°C with the addition of small amounts of propylene. The use of propylene and high concentrations of methyltrichlorosilane (9 vol %) allowed the deposition of superhard SiC coatings (42 GPa). The superhard SiC could result from the presence of a SiC–C solid solution, undetectable by X-ray diffraction but visible by Raman spectroscopy. Another sample obtained by the use of 50 vol % Argon, also showed the formation of SiC with good properties. The use of a flat substrate together with the particles showed the importance of carrying out the analysis on actual particles rather than in flat substrates. We show that it is possible to characterize the anisotropy of pyrolytic carbon by Raman spectroscopy.

Superstructure formation in the solid solution Sc3Pt3−xIn3 (x = 0–0.93)

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Nataliya L. Gulay ◽  
Rolf-Dieter Hoffmann ◽  
Jutta Kösters ◽  
Yaroslav M. Kalychak ◽  
Stefan Seidel ◽  
...  
Keyword(s):  
Solid Solution ◽  
Diffraction Data ◽  
High Frequency ◽  
Lattice Parameters ◽  
X Ray Diffraction ◽  
Space Group ◽  
X Ray ◽  
Platinum Content ◽  
Arc Melting ◽  
Modulation Vector

Abstract The equiatomic indide ScPtIn (ZrNiAl type, space group P 6 ‾ $&#x203e;{6}$ 2m) shows an extended solid solution Sc3Pt3–xIn3. Several samples of the Sc3Pt3–xIn3 series were synthesized from the elements by arc-melting and subsequent annealing, or directly in a high frequency furnace. The lowest platinum content was observed for Sc3Pt2.072(3)In3. All samples were characterized by powder X-ray diffraction and their lattice parameters and several single crystals were studied on the basis of precise single crystal X-ray diffractometer data. The correct platinum occupancy parameters were refined from the diffraction data. Decreasing platinum content leads to decreasing a and c lattice parameters. Satellite reflections were observed for the Sc3Pt3–xIn3 crystals with x = 0.31–0.83. These satellite reflections could be described with a modulation vector ( 1 3 , 1 3 , γ ) $\left(\frac{1}{3},\frac{1}{3},\gamma \right)$ ( γ = 1 2 $\gamma =\frac{1}{2}$ c* for all crystals) and are compatible with trigonal symmetry. The interplay of platinum filled vs. empty In6 trigonal prisms is discussed for an approximant structure with space group P3m1.

Elaboration, Structure and Mössbauer Spectroscopy of Nanostructured Fe100−xSix Powders Elaborated by Mechanical Alloying

SPIN ◽  
2017 ◽  
Vol 07 (02) ◽  
pp. 1750002 ◽  
Author(s):  
M. Hemmous ◽  
A. Guittoum
Keyword(s):  
Magnetic Field ◽  
Solid Solution ◽  
Mechanical Alloying ◽  
Hyperfine Magnetic Field ◽  
Lattice Parameter ◽  
X Ray Diffraction ◽  
X Ray ◽  
Grain Sizes ◽  
The Mean ◽  
Xrd Studies

We have studied the effect of the silicon concentration on the structural and hyperfine properties of nanostructured Fe[Formula: see text]Six powders ([Formula: see text], 20, 25 and 30[Formula: see text]at.%) prepared by mechanical alloying. The X-ray diffraction (XRD) studies indicated that after 72[Formula: see text]h of milling, the solid solution bcc-[Formula: see text]-Fe(Si) is formed. The grain sizes, [Formula: see text]D[Formula: see text] (nm), decreases with increasing Si concentration and reaches a minimum value of 11[Formula: see text]nm. We have found that the lattice parameter decreases with increasing Si concentration. The changes in values are attributed to the substitutional dissolution of Si in Fe matrix. From the adjustment of Mössbauer spectra, we have shown that the mean hyperfine magnetic field, [Formula: see text]H[Formula: see text] (T), decreases with increasing Si concentration. The substitutional dependence of [Formula: see text]H[Formula: see text] (T) can be attributed to the effect of p electrons Si influencing electrons d of Fe.

Microstructures of two-phase Ti–Cr alloys containing the TiCr2 Laves phase intermetallic

1997 ◽  
Vol 12 (6) ◽  
pp. 1472-1480 ◽  
Author(s):  
Katherine C. Chen ◽  
Samuel M. Allen ◽  
James D. Livingston
Keyword(s):  
Laves Phase ◽  
X Ray Diffraction ◽  
Orientation Relationships ◽  
Phase Growth ◽  
Two Phase ◽  
X Ray ◽  
Lattice Constants ◽  
Annealing Temperatures ◽  
Transmission Electron ◽  
Phase Intermetallic

Microstructures of two-phase Ti–Cr alloys (Ti-rich bcc + TiCr2 and Cr-rich bcc + TiCr2) are analyzed. A variety of TiCr2 precipitate morphologies is encountered with different nominal alloy compositions and annealing temperatures. Lattice constants and crystal structures are determined by x-ray diffraction (XRD) and transmission electron microscopy (TEM). Orientation relationships between the beta bcc solid solution and C15 TiCr2 Laves phase are understood in terms of geometrical packing, and are consistent with a Laves phase growth mechanism involving twinning.

Sign in / Sign up

Export Citation Format

Share Document