scholarly journals Producción animal en pasturas de tres leguminosas asociadas con Urochloa decumbens en los Llanos Orientales de Colombia

2021 ◽  
Vol 9 (2) ◽  
pp. 192-205
Author(s):  
Alvaro Rincón Castillo ◽  
Mayra Villalobos
Keyword(s):  
Block Design ◽  
The Other ◽  
First Year ◽  
Forage Production ◽  
Desmodium Ovalifolium ◽  
Brachiaria Decumbens ◽  
Randomized Complete Block Design ◽  
Urochloa Decumbens ◽  
Brahman Steers ◽  
Pasture Legume

In a loamy clay soil of the Colombian Altillanura, animal production of the legumes Centrosema molle accession CIAT 15160, C. macrocarpum accession CIAT 15799 and Grona heterocarpa subsp. ovalifolia (syn. Desmodium ovalifolium) cv. Maquenque, in association with Urochloa decumbens (syn. Brachiaria decumbens) cv. Decumbens, was evaluated under rotational grazing with zebu Brahman steers. The experiment was established in a native savanna area at the Carimagua Research Center of Agrosavia, in a randomized complete block design with three replications. During three years of grazing, C. molle stood out over the other legumes, due to its good forage production and ability to associate and persist with the grass, reaching 40% in the botanical composition in the first year and 24% in the third year. The highest animal liveweight (LW) gains were achieved with this legume with, on average, 760 g/animal/day in the rainy season and 500 g/animal/day in the dry season. With an average stocking rate equivalent to 800 kg LW/ha, mean annual hectare productivity of the pasture with C. molle reached 600 kg LW compared with an average of about 380 kg/ha/year obtained in the other associations and in the grass-only pasture. It is concluded that C. molle CIAT 15160 is a promising pasture legume for the region and confirming its productivity and persistence at farm level and in association with other grasses seems warranted.

scholarly journals S-metolachlor efficacy on the control of Brachiaria decumbens, Digitaria horizontalis, and Panicum maximum in mechanically green harvested sugarcane

2012 ◽  
Vol 30 (4) ◽  
pp. 861-870 ◽  
Author(s):  
N.M. Correia ◽  
F.J. Perussi ◽  
L.J.P. Gomes
Keyword(s):  
Sugar Cane ◽  
Crop Residue ◽  
Block Design ◽  
Soil Surface ◽  
Panicum Maximum ◽  
Herbicide Application ◽  
Visible Injury ◽  
Brachiaria Decumbens ◽  
Randomized Complete Block Design ◽  
Herbicide Treatments

The aim of this study was to assess the efficacy of S-metolachlor applied in pre-emergence conditions for the control of Brachiaria decumbens, Digitaria horizontalis, and Panicum maximum in sugar cane mechanically harvested without previous burning of the crop (green harvest) with the crop residue either left or not on the soil surface. The experiments were established in the field according to a randomized complete block design with four repetitions in a 7 x 2 split-plot scheme. In the plots, five herbicide treatments were studied (S-metolachlor at 1.44, 1.92, and 2.40 kg ha-1, clomazone at 1.20 kg ha-1, and isoxaflutole at 0.188 kg ha-1), and two control treatments with no herbicide application. In the subplots, the presence or absence of sugar cane crop residue on the soil surface was evaluated. S-metolachlor efficacy was not hampered by either 14 or 20 t ha-1 of sugar cane crop residue on the soil surface. When sugar cane crop residue was covering the soil surface, S-metolachlor at a rate of 1.44 kg ha-1 resulted in weed control similar at their larger rates, where as without the presence of crop residue, S-metolachlor controlled B. decumbens, D. horizontalis, and P. maximum at the rates of 1.92, 1.44, and 1.92 kg ha-1, respectively. The herbicides clomazone and isoxaflutole were effective for the studied species, independently of the crop residue covering the soil surface. S-metolachlor caused no visible injury symptoms to the sugar cane plant. Clomazone and isoxaflutole caused visible injuries to the sugar cane plant. None of the herbicides negatively affected the number of viable culms m² or the culm height and diameter.

scholarly journals Testing of microbial additives in the rooting of Norway spruce (Picea abies [L.] Karst.) stem cuttings

2011 ◽  
Vol 57 (No. 12) ◽  
pp. 555-564 ◽  
Author(s):  
I. Repáč ◽  
J. Vencurik ◽  
M. Balanda
Keyword(s):  
Norway Spruce ◽  
Shoot Growth ◽  
Growth Parameters ◽  
Alginate Bead ◽  
Block Design ◽  
The Other ◽  
Stem Cuttings ◽  
Naturally Occurring ◽  
Randomized Complete Block Design ◽  
Ecm Fungi

&nbsp;Laboratory-produced alginate-bead inoculum of ectomycorrhizal (ECM) fungi Cortinarius sp. and&nbsp;Gomphidius glutinosus, fungal commercial products ECtovit<sup>&reg; </sup>and Trichomil<sup>&reg;</sup>, bacterial commercial product BactoFil&nbsp;B<sup>&reg;</sup>, and commercial rooting stimulator Vetozen<sup>&reg;</sup> were applied to a peat-perlite (1:2, v:v) rooting substrate of Norway spruce stem cuttings collected from 4-year-old nursery-grown seedlings immediately before the insertion of cuttings into the substrate. The application of beads free of fungi and the substrate without an additive were the other treatments. The cuttings were rooted in vessels (60 cuttings per vessel, 180 per treatment) placed in a glasshouse and arranged in a randomized complete block design. The cuttings were estimated for one growing season (approximately for 26 weeks) after their insertion into the rooting substrate. Rooting % of the cuttings ranged from 45 (mycelium-free beads) to 75 (control) according to treatments, 64 on average. No significant differences among treatments were found in % of ECM morphotypes, total ECM colonization of roots (%), and growth parameters of shoots and roots of the cuttings. The applied microbial additives were not sufficiently efficient to form treatment-related ectomycorrhizas that were formed by naturally occurring ECM fungi. Inoculation by the ECM fungus Cortinarius sp. and application of Trichomil had a partial stimulative effect on the shoot growth of cuttings. Shoot and root growth parameters were not significantly correlated with total ECM colonization, except for a negative dependence of the root number in Trichomil treatment. A higher concentration of K but lower concentrations of Ca and Mg in Ectovit treatment than in the other treatments were detected.&nbsp; &nbsp;

scholarly journals Effect of planting density on yield and yield attributes of local aromatic rice varieties

2018 ◽  
Vol 43 (3) ◽  
pp. 489-497
Author(s):  
J Halder ◽  
GM Rokon ◽  
MA Islam ◽  
N Salahin ◽  
MK Alam
Keyword(s):  
Block Design ◽  
Grain Weight ◽  
The Other ◽  
Planting Density ◽  
Aromatic Rice ◽  
Rice Varieties ◽  
Yield Attributes ◽  
Straw Yield ◽  
Randomized Complete Block Design ◽  
1000 Grain Weight

An experiment was conducted at the Agronomy Field of Patuakhali Science and Technology University, Dumki, Patuakhali from June to December, 2013 to find out the effect of variety and planting density on the yield and yield attributing characters of local aromatic rice. The experiment was laid out in a factorial randomized complete block design with three replications, which consisted of three local aromatic rice varieties (Chinigura, Shakhorkhora and Kalizira) and four planting densities were viz. S1 (25 cm × 20 cm), S2 (20 cm × 20 cm), S3 (20 cm × 15 cm) and S4 (20 cm × 10 cm). The results revealed that the local aromatic rice var. Shakhorkhora variety produced the highest number of grains per panicle (131) and 1000-grain weight (13.8 g), consequently higher grain (2.63 t ha-1), followed by Kalizira (2.56 t ha-1) and straw yield (4.21 t ha-1). One the other hand, higher number of tillers per hill (14.8), number of grains per panicle (140 nos.) were found in 20 cm × 20 cm spacing with higher grain yield.Bangladesh J. Agril. Res. 43(3): 489-497, September 2018

scholarly journals PRODUCTION AND NUTRITIVE VALUE OF CANARANA ERECTA LISA (Echinocloa piramidalis Lam.) IN RESPONSE TO HARVEST INTERVALS

2019 ◽  
Vol 20 ◽  
Author(s):  
Angela Maria de Vasconcelos ◽  
Mauricio Cesio Araujo Dutra ◽  
Robson Mateus Freitas Silveira ◽  
Valdson José da Silva ◽  
Luís Alfredo Pinheiro Leal Nunes ◽  
...  
Keyword(s):  
Nutritive Value ◽  
Block Design ◽  
Neutral Detergent Fiber ◽  
Experimental Unit ◽  
Forage Production ◽  
Dry Matter Digestibility ◽  
Forage Digestibility ◽  
Randomized Complete Block Design ◽  
Harvest Intervals

Abstract The objective of this study was to compare and explain the variations in the production and nutritive value of canarana erecta lisa grass (Echinocloa pyramidalis Lam.) at different harvest intervals. The treatments corresponded to the cut intervals of 20, 27, 34, 41, 48, 55, 62, and 69 days. The experimental design was a randomized complete block design with three replications. Each experimental unit had 6m2 (3m ×2m). The variables studied included forage production, canopy height, and nutritive value o harvested forage. Forage production varied from 11517 to 12324 kg ha-1; Plant heights from 48.8 to 234 cm; Neutral detergent fiber (NDF) from 68.8% to 71.13%; Acid detergent fiber (ADF) from 36.20% to 44.15%; Crude protein (CP) from 11.43% to 5.85% and in “in vitro” dry matter digestibility (IVDMD) from 63.30% to 47.42%. These values indicated that the nutritive value of canarana erecta lisa was reduced at longer harvest intervals. It is recommended to harvest the grass at 35 days of regrowth favoring productivity, nutritive value and forage digestibility.

scholarly journals Silvicultural performance of forest species introduced in integrated livestock forest system in Lavras, MG, Brazil

2017 ◽  
Vol 47 (12) ◽  
Author(s):  
Erick Martins Nieri ◽  
Renato Luiz Grisi Macedo ◽  
Nelson Venturin ◽  
Regis Pereira Venturin ◽  
José Alvim Pinto Júnior ◽  
...  
Keyword(s):  
Survival Rate ◽  
Block Design ◽  
Minas Gerais ◽  
The Other ◽  
Forest Species ◽  
Diameter At Breast Height ◽  
African Mahogany ◽  
Breast Height ◽  
Red Cedar ◽  
Randomized Complete Block Design

ABSTRACT: The objective of this study was to evaluate the silvicultural performance of four forest species introduced in a setting for integrated livestock forest (ILF) in a pasture in Lavras, Minas Gerais, Brazil. The species included were the Australian red cedar (seminal and clonal), African mahogany, teak, and guanandi. A split plot scheme with a randomized complete block design comprising four replicates and 48 plants per plot, was used in the following arrangement: (3(3x2) +7x2) m. The evaluation times (12, 18, 31, 36, and 43 months after planting) corresponded to the subplots. Performances of all four species were evaluated on the basis of their survival rate, height (H) and diameter at breast height (DBH). Based on the performance of the species with regard to these parameters, the clonal Australian red cedar showed a greater growth in DBH and height in the ILF setting as compared to the other species, which indicates it to be a suitable species for the region of Lavras, MG as long as its survival control occurs in the implantation phase.

scholarly journals Caladium cv. Florida sweetheart production at different planting depths and sowing dates

2018 ◽  
Vol 24 (4) ◽  
pp. 311-316 ◽  
Author(s):  
Ibrar Hussain ◽  
Noor Ul Amin
Keyword(s):  
Plant Height ◽  
Tuber Yield ◽  
Block Design ◽  
Tuber Size ◽  
The Other ◽  
Planting Depth ◽  
Sowing Dates ◽  
Randomized Complete Block Design ◽  
Ornamental Horticulture ◽  
The University

Ornamental bulbous crops emergence and yield can be improved by its emergence from soil. The response of Caladium to different planting depths and dates was investigated at Ornamental Horticulture Nursery, Department of Horticulture, The University of Agriculture, Peshawar during the year 2008. Randomized Complete Block Design in a split plot arrangement was used repeated three times. Sowing dates (30th March, 15th April and 30th April) were allotted to main plots whereas planting depths (2.5 cm, 5 cm, 7.5 cm and 10 cm) were kept in sub plots. Findings revealed that Caladium tubers sown on 30th March took maximum days to sprouting (33), produced maximum number of sprouts plant-1 (2.21), gained maximum tuber size (40.88 cm3) with high tuber yield (5397 kg ha-1). On the other hand, tubers sown on 30th April took less days to sprouting (20.21), produced less number of sprouts plant-1(1.53), produced small tuber (33.28 cm3) and total tuber yields was also less (4374 kg ha-1). In case of planting depth, Caladium tubers sown at a depth of 7.5cm resulted in maximum plant height (52 cm), tuber size (41.76 cm3), and tuber yield (5288 kg ha-1) while maximum number of tubers plant-1 (1.92) was observed at a depth of 10 cm. Tubers sown in 2.5 cm depth resulted in minimum tuber yield (4538 kg ha-1) and plant height (46.56 cm). To maximize vegetative as well as tubers production of Caladium cv. Florida sweet heart, it shall be sown on 30th March with 7.5cm depth.

scholarly journals Comportamiento del pasto Taiwán (Pennisetum purpureum) fertilizado con efluente de biogas en época de máxima precipitación pluvial

2016 ◽  
Vol 1 ◽  
pp. 69
Author(s):  
José M. Will ◽  
Guillermo Valle A.
Keyword(s):  
Block Design ◽  
Pennisetum Purpureum ◽  
Forage Production ◽  
Available N ◽  
Plot Size ◽  
Average Annual Temperature ◽  
Randomized Complete Block Design ◽  
Low Levels ◽  
Made In ◽  
North Latitude

This work was conducted at the Centro Universitario Regional del Litoral Atlántico (CURLA) at 15°47’north latitude and 86°50’ west longitude, 10 km west La Ceiba, Honduras. The ecosystem Is characterized as tropical rain forest having 2700 mm of rainfall per year and an average annual temperature of 27°C with 82% relative humidity. Soils in the region are characterized by having an average soil pH of 4.9, have low levels of available N and P, high levels of Fe and intermediate levels of Mn. A randomized complete block design was employed with 4 replications. Plot size was 2 x 3 m encompassing 3 rows. In each block three rates of biogas effluent were applied at 250,500 and 750 kg N/ha/year. An added check with zero effluent was also included. The grass was cut at the surface of the soil every 56 days and the application of effluent was made in split applications. The results indicate that these treatments increased yield at least 25 % above the check. In the first cuttings there was a tendency to decrease yields although final cuttings demonstrated increased yields. This same response was observed in plant protein, especially in the last cutting where a 48 % increase was obtained. The best  treatmentrelative to forage production and protein content was found when 500 kg N/ha/year was applied.

scholarly journals EFFECTS OF MYCORRHIZAE, MEDIA AND CONTAINER TYPE ON THE GROWTH OF GREEN PEPPER AND LETTUCE TRANSPLANTS

HortScience ◽  
1991 ◽  
Vol 26 (6) ◽  
pp. 709B-709 ◽  
Author(s):  
Ray A. Watson ◽  
Katrine A. Stewart ◽  
Valentin Furlan
Keyword(s):  
Plant Growth ◽  
Leaf Area ◽  
Block Design ◽  
Dry Weight ◽  
The Other ◽  
Fresh Weight ◽  
Green Pepper ◽  
Shoot Dry Weight ◽  
Randomized Complete Block Design ◽  
Container Type

The effects of two mycorrhizal species (Glomus versiforme and Glomus intraradix) and a control on the growth of green pepper, Capsicum annuum, and lettuce, Lactuca sativa, seedlings have been evaluated using four types of growing media (Peatwool, Fafard bulk mix. Cornell mix and a compost based mix) and two types of containers, Cell Packs (125 cc volume) and Pro-Trays (65 cc volume) for green pepper and Cell Packs (125 cc volume) and Plug Flats (33 cc volume) for lettuce. The experiments were split plot randomized Complete block design with 6 blocks (lettuce) and 4 blocks (pepper). Seeds were sown directly into the containers of mycorrhizal inoculated media. All treatments received the same fertilizer regime. Cell volume had no significant effects on green pepper fresh weight, dry weight, stem diameter, leaf area or leaf number but the lettuce Cell Pack plants had significantly higher fresh and dry weights, more leaves and higher leaf area. The Fafard Bulk and the Compost mix gave significantly higher fresh and dry weights than did the other two media for both green pepper and lettuce. Mycorrhizal species did not influence plant growth with the exception of leaf area in green peppers and shoot dry weight in lettuce.

scholarly journals Productivity and Fruit Quality Influenced by Bioestimulant in Olive under Hot and Arid Environment of Mexico

2020 ◽  
pp. 1-7
Author(s):  
Raúl Leonel Grijalva- Contreras ◽  
Rubén Macías- Duarte ◽  
Arturo López- Carvajal ◽  
Fabián Robles- Contreras ◽  
Manuel de Jesús Valenzuela- Ruiz
Keyword(s):  
Irrigation System ◽  
Block Design ◽  
Olive Tree ◽  
Fruit Trees ◽  
Arid Environment ◽  
Fruit Production ◽  
Fruit Weight ◽  
First Year ◽  
Randomized Complete Block Design ◽  
Marketable Fruit

Actually modern fruit trees physiology is focused on the stimulation of plant cell development and fruit production using bioestimulant. This study evaluated the effect of bioestimulant ‘Engordone’ under two doses (0.5 and 1.0 L ha-1) and two times (pea-size fruit and 28 days later) in olive tree cv Manzanilla under hot and arid environment of Mexico. The experiment was carried out during 2018 and 2019 at National Research Institute for Forestry, Agriculture and Livestock (INIFAP) in the Experimental Station Coast of Hermosillo, Sonora, Mexico. The experiment was carried out on olive tree of eight years old, planted at distance of 10 x 5 m (200 trees ha-1) and under drip irrigation system. The experiment was analyzed using a randomized complete block design and four replications. The variables evaluated were olive yield, classification by size and fruit characteristics (fruit weight and pulp-pit ratio). The results showed that bioestimulant application had little effect on olive yield which increased the yield by 14.1 and 6.5% in 2018 and 2019, respectively compared to untreated trees, but without statistical difference. Fruit characteristic were no affected by treatments. Only the percentage of non-marketable fruit was statistically (P<0.05) reduced in the first year. Finally, new biostimulants and times of application are necessary to carried out to improve the size of table olives.

scholarly journals Yield and botanical composition of a mixed grass-legume pasture in response to maintenance fertilization

2010 ◽  
Vol 39 (8) ◽  
pp. 1633-1640 ◽  
Author(s):  
Carlos Mauricio Soares de Andrade ◽  
Judson Ferreira Valentim ◽  
João Batista Martiniano Pereira ◽  
Aliedson Sampaio Ferreira
Keyword(s):  
Dry Matter ◽  
Accumulation Rate ◽  
Block Design ◽  
Dry Matter Accumulation ◽  
Forage Production ◽  
Nutritional Factors ◽  
Arachis Pintoi ◽  
Randomized Complete Block Design ◽  
Limiting Nutrient ◽  
Mixed Grass

This study was carried out on a low-productive Brachiaria brizantha cv. Marandu pasture, mixed with Arachis pintoi cv. Belmonte (forage peanut), established 13 years ago in a Red-Yellow Latosol in Acre State, western Brazilian Amazon. The purpose was to evaluate the response of this pasture to different fertilizer combinations, aiming at identifying the nutritional factors responsible for the fall of pasture carrying capacity and for the reduced vigor of forage peanut. It was used a randomized complete block design, with three replications and 12 combinations of nitrogen, phosphorus, potassium, lime, sulfur, and micronutrients (100 kg/ha of N, P2O5 and K2O; 300 kg/ha of dolomitic lime; 30 kg/ha of sulfur and FTE BR-10). Fertilizers were broadcast in 5 × 5-m plots, and the experimental area was isolated from grazing for 35 days. Pasture response to fertilizations showed that nitrogen was the main limiting nutrient to forage production. The other nutrients, applied singly or in a combined way, without nitrogen source, did not change dry matter accumulation rate. Overall, fertilizations with nitrogen provided dry matter accumulation rate of 115 kg/ha/day in comparison to only 32 kg/ha/day when nitrogen was not applied. There was no response from forage peanut to fertilization, so, there are other factors responsible for its reduced vigor of regrowth.

Sign in / Sign up

Export Citation Format

Share Document