LATVIAN HOUSEHOLD HEATING FUEL DIFFERENTIATION OPTIONS

2019 ◽  
pp. 60
Author(s):  
Kārlis Missa
Keyword(s):  
Human Life ◽  
Heating System ◽  
Wood Fuel ◽  
Development Trends ◽  
Heating Systems ◽  
Heating Fuel

From the beginning of construction in the territory of Latvia there was an important issue that affected any house. How to get heat? As the territory of Latvia was always rich in forests, the answer was obvious - with firewood. This heating variant is also topical today. However, with the development of heating and the rhythm of human life, many classic heating, with wood, is not enough. Consequently, the author looks at the types of heating in Latvia's households and their development. As well as the consumption of wood fuel and its development trends. Wood specialty products, such as pellets, are nowadays a popular fuel. This article will be useful for those who are considering upgrading or converting a heating system that is going to build a new building, as well as producers of fuel and heating systems.

Innovative electrotechnological systems to provide the temperature modes of technological pipelines

2019 ◽  
Vol 2 (1) ◽  
pp. 29-39 ◽  
Author(s):  
S. G. Konesev ◽  
P. A. Khlyupin
Keyword(s):  
Induction Heating ◽  
Thermal Exposure ◽  
Heating System ◽  
The Arctic ◽  
Process Conditions ◽  
Heating Systems ◽  
Fluid Properties ◽  
Low Efficiency ◽  
Extreme North ◽  
Induction Heating System

Introduction: the systems of thermal effects on thermo-dependent, viscous and highly viscous liquids under conditions of the Arctic and the Extreme North are considered. Low efficiency and danger of heating systems based on burned hydrocarbons, heated liquids and steam are shown. Electrothermal heating systems used to maintain thermo-dependent fluids in a fluid state are considered. The evaluation of the effectiveness of the application of the most common electrothermal system — heating cables (tapes). The most effective electrothermal system based on induction technologies has been determined. Materials and methods: considered methods of thermal exposure to maintain the fluid properties of thermo-dependent fluids at low extreme temperatures. Results: presents an induction heating system and options for its implementation in the Extreme North and the Arctic. Conclusions: induction heating system to minimize loss of product quality, improve the system performance under changing process conditions, eliminate fire product, to reduce the influence of the human factor.

scholarly journals Impacts on Indoor Thermal Comfort and Heating Energy Use in Hellenic Dwellings from Occupant Behavioral Reactions

2021 ◽  
Vol 11 (14) ◽  
pp. 6254
Author(s):  
Elena G. Dascalaki ◽  
Constantinos A. Balaras
Keyword(s):  
Thermal Comfort ◽  
Energy Use ◽  
Energy Savings ◽  
Local Heating ◽  
Economic Recession ◽  
Heating System ◽  
Building Stock ◽  
Heating Systems ◽  
Indoor Thermal Comfort ◽  
Energy Audits

In an effort to reduce the operational cost of their dwellings, occupants may even have to sacrifice their indoor thermal comfort conditions. Following the economic recession in Greece over recent years, homeowners have been forced to adapt their practices by shortening heating hours, lowering the indoor thermostat settings, isolating spaces that are not heated or even turning off their central heating system and using alternative local heating systems. This paper presents the results from over 100 occupant surveys using questionnaires and walk-through energy audits in Hellenic households that documented how occupants operated the heating systems in their dwellings and the resulting indoor thermal comfort conditions and actual energy use. The results indicate that the perceived winter thermal comfort conditions were satisfactory in only half of the dwellings, since the actual operating space heating periods averaged only 5 h (compared with the assumed 18 h in standard conditions), while less than half heated their entire dwellings and only a fifth maintained an indoor setpoint temperature of 20 °C, corresponding to standard comfort conditions. Mainstream energy conservation measures include system maintenance, switching to more efficient systems, reducing heat losses and installing controls. This information is then used to derive empirical adaptation factors for bridging the gap between the calculated and actual energy use, making more realistic estimates of the expected energy savings following building renovations, setting prudent targets for energy efficiency and developing effective plans toward a decarbonized building stock.

scholarly journals Technology Pathways and Economic Analysis for Transforming High Temperature to Low Temperature District Heating Systems

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3218
Author(s):  
Pedro Durán ◽  
Herena Torio ◽  
Patrik Schönfeldt ◽  
Peter Klement ◽  
Benedikt Hanke ◽  
...  
Keyword(s):  
Sensitivity Analysis ◽  
Renewable Energy ◽  
High Temperature ◽  
Low Temperature ◽  
Economic Analysis ◽  
District Heating ◽  
Heating System ◽  
District Heating System ◽  
Heating Systems ◽  
District Heating Systems

There are 1454 district heating systems in Germany. Most of them are fossil based and with high temperature levels, which is neither efficient nor sustainable and needs to be changed for reaching the 2050 climate goals. In this paper, we present a case study for transforming a high to low temperature district heating system which is more suitable for renewable energy supply. With the Carnot Toolbox, a dynamic model of a potential district heating system is simulated and then transformed to a low temperature supply. A sensitivity analysis is carried out to see the system performance in case space constrains restrict the transformation. Finally, an economic comparison is performed. Results show that it is technically possible to perform the transformation until a very low temperature system. The use of decentralized renewable sources, decentralized heat storage tanks and the placement of a heat pump on each building are the key points to achieve the transformation. Regarding the sensitivity analysis, the transformation is worth doing until the seasonal storage and solar collector field sizes are reduced to 60% and 80% of their values in the reference case, respectively. The economic analysis shows, however, that it is hard for highly efficient low temperature renewable based heat networks to compete with district heating systems based on a centralized fossile CHP solution. Thus, though the presented transformation is technically possible, there is a strong need to change existing economic schemes and policies for fostering a stronger promotion of renewable energy policies in the heat sector.

scholarly journals How to Improve Effectiveness of Renewable Space Heating Programs by Better Understanding Homeowner—Installer Interactions

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4625
Author(s):  
Alisa Freyre ◽  
Stefano Cozza ◽  
Matthias Rüetschi ◽  
Meinrad Bürer ◽  
Marlyne Sahakian ◽  
...  
Keyword(s):  
Literature Review ◽  
Financial Incentives ◽  
Heating System ◽  
Heat Pumps ◽  
Single Family ◽  
Heating Systems ◽  
Current State ◽  
Ex Post ◽  
Improved Technology

In this paper, we perform a literature review on the current state of knowledge about homeowners in the context of the adoption of renewable heating systems. Despite a considerable number of studies about homeowners, homeowner–installer interactions, and ways to improve the effectiveness of renewable heating programs, based on homeowner knowledge, have not yet been studied in much detail. To address these knowledge gaps, we conduct a qualitative study on single-family house owners who installed heat pumps and took part in a renewable heating program in Geneva, Switzerland. We cover homeowner practices in choosing installers and heating system types, homeowners’ feedback about heat pump installation and use, as well as their experience in participation in the renewable heating program. Based on the literature review and the findings from the interviews, we provide the following recommendations on how to increase the effectiveness of renewable heating programs: (a) support for homeowners should not be limited to financial incentives; (b) partnership programs with installers could help to increase the quality of installation services and enable homeowners to choose qualified installers; and (c) assisting homeowners in pre-qualification and ex-post analysis, in learning how to operate their renewable heating systems and in solving problems during the post-installation period, can contribute to improved technology reputation, which can, in turn, increase technology uptake by other homeowners.

scholarly journals METHODOLOGY OF THE PRIMARY DATA RECONSTRUCTION OF SINGLE PIPE HEATING SYSTEMS/VIENVAMZDŽIŲ ŠILDYMO SISTEMŲ PIRMINIŲ DUOMENŲ NUSTATYMO METODIKA

1999 ◽  
Vol 5 (5) ◽  
pp. 318-322
Author(s):  
Edvardas Tuomas ◽  
Saulius Neverbickas
Keyword(s):  
World War Ii ◽  
District Heating ◽  
Heating System ◽  
Heat Fluxes ◽  
Primary Data ◽  
Complex Coefficient ◽  
Heating Systems ◽  
Pipe System ◽  
Central Heating ◽  
Single Pipe

The majority of dwellings in Lithuania are situated in blocks of flats. The dwellings were built after World War II and they are heated by single pipe central heating systems, connected to district heating. The dwellers are not quite satisfied with such a heating system and try to improve it, but do that in a wrong way, by increasing the surface of radiators. Such means lead to violation of thermal regime and comfort conditions for other dwellers. There exists sometimes the necessity of reconstructing premises and together—the heating system. During the reconstruction the primary heat fluxes from radiators should be known, but very often such data are lost and only the size of radiators (number of sections) are known. To reconstruct the required primary data for single pipe systems is complicated because the temperatures of inlet and outlet water for radiators are unknown. In this article the methodology is proposed how to perform the calculations leading to the required data. The aim of calculations is the establishment of heat fluxes from each radiator connected to the riser. Heat flux from radiator can be calculated according the formula (1) but the complex coefficient is unknown. It could be found from formulae (2) but some magnitudes are unknown. According to the proposed methodology the values of unknown magnitudes are taken approximately and calculations are performed with iterations. In such a way the flow rate of water in riser is established from formula (3), which is the same for each radiator (the property of single pipe system). From formulas (3) and (4) an equation is produced (5), and is used for calculations of unknown temperatures. The equation (6) is used for calculation of heat fluxes from radiators. To carry out the above-mentioned calculations without computer practically is impossible due to many cycles of iteration. The programme was prepared to make easy all these calculations. The scheme of algorithm of programme is given in Fig 1. An example of calculation is given in this article. Calculations were fulfilled by newly created programme. The riser chosen for calculation is shown in Fig 2. The results of calculation are given in Table 1. The table shows that according to the proposed methodology the programme based on it can be used for reconstruction of primary data of single pipe heating systems successfully.

scholarly journals Interface development trends: social robotics and human-machine interaction

2020 ◽  
Vol 20 (4) ◽  
pp. 25-30
Author(s):  
S.B. Kamesheva ◽  
Keyword(s):  
Comparative Analysis ◽  
New Technologies ◽  
Human Life ◽  
Social Robotics ◽  
Development Trends ◽  
Human Machine Interaction ◽  
The World ◽  
Machine Interaction

This article discusses the development of new technologies in the field of social robotics and humanmachine interaction interfaces. A comparative analysis was proposed about the availability levels of technologies in Russia and in the world. The consequences of the development and integration of social robotics in human life are considered.

scholarly journals MODERNIZATION OF THE HEATING SYSTEM BY APPLYING A TURBO FIREPLACE AND INTEGRATOR

2018 ◽  
pp. 57-69
Author(s):  
I. R. Vashchishak ◽  
O. Lavryk
Keyword(s):  
Thermal Energy ◽  
Energy Efficient ◽  
Heating System ◽  
Energy Prices ◽  
Heating Systems ◽  
Block Scheme

The importance of the work is based on the necessity of developing energy-efficient heating systems in the conditions of rapid increase of energy prices. Heating systems for buildings and fuels for them are analyzed. It is established that a combined heating system with several sources of thermal energy, one of which is turbo fireplace is the most energy-efficient. The processes in fireplaces with a water loop are considered. The design of turbo fireplace is improved by applying a thermoelectric battery. The elements of the thermoelectric battery are selected and its power is determined. The power of the integrated heating system of the building is calculated. The block scheme of the integrated heating system is considered. The heating system integrator is selected. The algorithm of microcontroller operation with advanced turbo fireplace with a thermoelectric battery is developed and a microcontroller operation is chosen. The algorithm of the integrated heating system developed an algorithm for the operation of its microcontroller.

scholarly journals Calculation Of Heat Loss Through The Pipes Of The Interior Central Heating System

2015 ◽  
Vol 5 (2) ◽  
pp. 29-36 ◽  
Author(s):  
I. Giurca
Keyword(s):  
Heat Loss ◽  
Heating System ◽  
Building Energy ◽  
Local Heat ◽  
Heat Losses ◽  
Energy Audit ◽  
Heating Systems ◽  
Central Heating ◽  
Calculation Methodology

Abstract The article presents aspects related to the calculation of heat loss through the pipes of the interior central heating system. The purpose of the article is to detail the local heat losses in case of central heating systems. Based on the conclusions of the article, we propose the modification of the calculation methodology related to the building energy audit.

An Embedded Prototype for a Distributed and Automated Line Heating System

2009 ◽  
Vol 25 (04) ◽  
pp. 182-190 ◽  
Author(s):  
Jackyou Noh ◽  
Jong Gye Shin ◽  
Kwang Hee Ko ◽  
Jae An Chun
Keyword(s):  
Robot Control ◽  
Heating System ◽  
Heating Process ◽  
Current Line ◽  
Line Heating ◽  
Design Data ◽  
Heating Systems ◽  
Network Information ◽  
Automated Process ◽  
Automated Line

Automated line heating systems have been developed based on stand-alone operation with no consideration of the extensibility and maintainability. In the line heating shop, many of the line heating works are performed simultaneously; therefore, a collaborative and simultaneous automated line heating system is needed. In order to develop such a new line heating system, the current line heating process was analyzed, and then a distributed and automated process was determined, and the parts to be distributed and automated were identified to propose a distributed and automated line heating system based on modularization and network. Information and data flow from production design to robot control have been analyzed and integrated in the system. The system has two main processes: the calculation of the line heating information and execution of a working unit without calculation. A prototype of the system has been developed to study the feasibility of the system. Tests were carried out by using real production design data of a middle-sized Korean shipyard.

scholarly journals District heating simulation in the aspect of heat supply safety

2018 ◽  
Vol 45 ◽  
pp. 00005 ◽  
Author(s):  
Bożena Babiarz ◽  
Paweł Kut
Keyword(s):  
District Heating ◽  
Heating System ◽  
Point Of View ◽  
Simulation Methods ◽  
District Heating System ◽  
Heating Systems ◽  
Network Failure ◽  
State Security ◽  
Wide Range ◽  
Heating Networks

District heating systems as strategic objects from the point of view of state security must ensure reliability and security in supply of heat to their customers [1, 2]. Thanks to computer simulation methods, district heating companies can analyse the operation of the heating networks at the design and operation stage. Computer simulations also offer a wide range of possibilities in the aspect of optimization of the district heating operation as well as prediction and analysis of network failure effects [3-6]. The paper concerns the simulation of a district heating network. The methods for the simulation of heating networks were characterized and simulations of district heating system were carried out. The effects of the failure were analysed at different values of outside temperatures and for different durations of failure. The value of compensation for undelivered heat was also determined. Simulations were carried out for an actual district heating system located in Rzeszow.

Sign in / Sign up

Export Citation Format

Share Document