scholarly journals ASSOCIATION BETWEEN FALLING NUMBER AND GRAIN CHARACTERISTICS TO EVALUATE PREHARVEST SPROUTING IN WHEAT

2020 ◽  
Vol 8 (6) ◽  
pp. 758-764
Author(s):  
Okuyama LA ◽  
◽  
CR Riede ◽  
MM Kohli ◽  
◽  
...  
Keyword(s):  
Early Stage ◽  
Strong Association ◽  
Germination Percentage ◽  
Preharvest Sprouting ◽  
Path Coefficient ◽  
Falling Number ◽  
Breeding Programs ◽  
Relationship Of ◽  
The Relationship ◽  
Selection Of

The falling number (FN) is a widely used parameter to evaluate sprouting damage in wheat. Despite its importance, many breeding programs lack facilities to determine the FN routinely. This study was conducted to elucidate the relationship of the falling number with germination percentage, visual sprouting score, hectoliter weight and the grain weight per spike, to improve the selection criteria in the pre-harvest sprouting (PHS) trials. Thirteen genotypes differing in PHS tolerance were evaluated in a rain simulator. The statistical analysis was conducted to understand the relationship of FN with grain characteristics. The path coefficient analysis revealed the highest association of the FN with the percentage of sprouted grains. Also, regression analysis determined that samples with more than 46% of sprouted grains had FN below 200s. The grains with 32 to 46% of germination resulted in FN values between 200 and 250s, and those with 19 to 32% of germination had FN between 250 and 300 s. Only those samples with less than 19% of germination resulted in FN values higher than 300s. The strong association between the germination percentage and the FN allows the selection of promising lines and the elimination of undesirable ones at an early stage of breeding.

scholarly journals Tolerance to preharvest sprouting and yield of wheat genotypes from different breeding programs

2015 ◽  
Vol 50 (8) ◽  
pp. 698-706
Author(s):  
Rafael Nörnberg ◽  
José Antonio Gonzalez da Silva ◽  
Henrique de Souza Luche ◽  
Elisane Weber Tessmann ◽  
Sydney Antonio Frehner Kavalco ◽  
...  
Keyword(s):  
Grain Yield ◽  
Block Design ◽  
Preharvest Sprouting ◽  
Rio Grande Do Sul ◽  
Falling Number ◽  
Breeding Programs ◽  
Wheat Genotypes ◽  
Randomized Complete Block Design ◽  
Superior Genotypes ◽  
Selection Of

Abstract:The objective of this work was to characterize the performance of elite wheat genotypes from different Brazilian breeding programs for traits associated with grain yield and preharvest sprouting. The study was conducted in 2010 and 2011 in the municipality of Capão do Leão, in the state of Rio Grande do Sul, Brazil, in a randomized complete block design with three replicates. Thirty-three wheat genotypes were evaluated for traits related to preharvest sprouting and grain yield. The estimate of genetic distance was used to predict potential combinations for selection of plants with high grain yield and tolerance to preharvest sprouting. The combined analysis of sprouted grains and falling number shows that the TBIO Alvorada, TBIO Mestre, Frontana, Fundacep Raízes, Fundacep Cristalino, and BRS Guamirim genotypes are tolerant to preharvest sprouting. Combinations of TBIO Alvorada and TBIO Mestre with Fundacep Cristalino show high potential for recovering superior genotypes for high grain yield and tolerance to preharvest sprouting.

scholarly journals Derivation and Performance of Standardized Enhanced Liver Fibrosis (ELF) Test Thresholds for the Detection and Prognosis of Liver Fibrosis

2019 ◽  
Vol 3 (5) ◽  
pp. 815-826 ◽  
Author(s):  
James Day ◽  
Preya Patel ◽  
Julie Parkes ◽  
William Rosenberg
Keyword(s):  
Liver Fibrosis ◽  
Delphi Panel ◽  
Test Results ◽  
Hazard Ratios ◽  
Test Thresholds ◽  
And Performance ◽  
Using Data ◽  
Relationship Of ◽  
The Relationship ◽  
Selection Of

Abstract Introduction Noninvasive tests are increasingly used to assess liver fibrosis and determine prognosis but suggested test thresholds vary. We describe the selection of standardized thresholds for the Enhanced Liver Fibrosis (ELF) test for the detection of liver fibrosis and for prognostication in chronic liver disease. Methods A Delphi method was used to identify thresholds for the ELF test to predict histological liver fibrosis stages, including cirrhosis, using data derived from 921 patients in the EUROGOLF cohort. These thresholds were then used to determine the prognostic performance of ELF in a subset of 457 patients followed for a mean of 5 years. Results The Delphi panel selected sensitivity of 85% for the detection of fibrosis and >95% specificity for cirrhosis. The corresponding thresholds were 7.7, 9.8, and 11.3. Eighty-five percent of patients with mild or worse fibrosis had an ELF score ≥7.7. The sensitivity for cirrhosis of ELF ≥9.8 was 76%. ELF ≥11.3 was 97% specific for cirrhosis. ELF scores show a near-linear relationship with Ishak fibrosis stages. Relative to the <7.7 group, the hazard ratios for a liver-related outcome at 5 years were 21.00 (95% CI, 2.68–164.65) and 71.04 (95% CI, 9.4–536.7) in the 9.8 to <11.3 and ≥11.3 subgroups, respectively. Conclusion The selection of standard thresholds for detection and prognosis of liver fibrosis is described and their performance reported. These thresholds should prove useful in both interpreting and explaining test results and when considering the relationship of ELF score to Ishak stage in the context of monitoring.

scholarly journals Evaluating Kupferstein’s claims of the relationship of behavioral intervention to PTSS for individuals with autism

2018 ◽  
Vol 4 (3) ◽  
pp. 122-129 ◽  
Author(s):  
Justin Barrett Leaf ◽  
Robert K. Ross ◽  
Joseph H. Cihon ◽  
Mary Jane Weiss
Keyword(s):  
Stress Disorder ◽  
Service Providers ◽  
Extreme Caution ◽  
Content Type ◽  
Diagnostic Threshold ◽  
Indirect Measures ◽  
Methodological Rigor ◽  
Relationship Of ◽  
The Relationship ◽  
Selection Of

Purpose Kupferstein (2018) surveyed 460 respondents and found that 46 percent of respondents met the diagnostic threshold for posttraumatic stress disorder after exposure to applied-behavior-analysis-based intervention. The purpose of this paper is to provide an evaluation a critical analysis of Kupferstein (2018) including the experimental methods and discussion of the results. Design/methodology/approach The authors evaluated the Kupferstein’s methodological rigor with respect to the use of hypothesis testing, use of indirect measures, selection of respondents, ambiguity in definitions, measurement system, and framing of the experimental question when conducting the correlational analysis in addition to Kupferstein’s analysis and discussion of the results. Findings Based upon the analysis, Kupferstein’s results should be viewed with extreme caution due to several methodological and conceptual flaws including, but not limited to, leading questions used within a non-validated survey, failure to confirm diagnosis, and incomplete description of interventions. Originality/value It is the authors’ hope that this analysis provides caregivers, clinicians, and service providers with a scientific lens which will useful in viewing the limitations and methodological flaws of Kupferstein.

scholarly journals RELATIONSHIP OF SKIN MEASUREMENTS AND MILK PRODUCTION LEVELS IN CATTLE BREEDS MAINTAINED IN THE TROPICS

2021 ◽  
Vol 4 (2) ◽  
pp. 92-95
Author(s):  
S. F. Amakiri
Keyword(s):  
Hair Follicle ◽  
Milk Production ◽  
Skin Thickness ◽  
Production Potential ◽  
Cattle Breeds ◽  
Positive Linear Correlation ◽  
The Tropics ◽  
Relationship Of ◽  
The Relationship ◽  
Selection Of

The relationship between mean skin thickness or hair follicle depth of the skin from the midside (12th rib) area and milk production levels of pure Friesian (Holstein)cattle breeds, their ¾ and 7/8 crosses with White Fulani zebu, and pure White Fulanis, maintained in South-Western Nigeria were studied. A strongly positive linear correlation (r = 0.9), significant at 1% level was found between skin thickness and hair follicle depth, and milk production levels in these breeds. The results indicate that for cows maintained in a hot humid tropical environment, comparative midside skin thickness and hair follicle depth could be used as indices of the milk production potential of cows. It could be a useful field tool for selection of cows for milk production when considered along with other characteristics

scholarly journals Archiving Metaxourgio

2021 ◽  
pp. 167-184
Author(s):  
Thomais Kordonouri
Keyword(s):  
Urban Area ◽  
21St Century ◽  
Ground Level ◽  
The Past ◽  
The Future ◽  
Relationship Of ◽  
The Relationship ◽  
Selection Of ◽  
The Way

‘Archive’ is a totality of records, layers and memories that are collected. A city is the archive that consists of the conscious selection of these layers and traces of the past and the present, looking towards the future. Metaxourgio is an area in the wider historic urban area of Keramikos in Athens that includes traces of various eras, beginning in the Antiquity and continuing all the way into the 21st century. Its archaeological space ‘Demosion Sema’ is mostly concealed under the ground level, waiting to be revealed. In this proposal, Metaxourgio is redesigned in light of archiving. Significant traces of the Antiquity, other ruins and buildings are studied, selected and incorporated in the new interventions. The area becomes the ‘open archive’ that leads towards its lost identity. The proposal aims not only to intensify the relationship of architecture with archaeology, but also to imbue the area’s identity with meanings that refer to the past, present and future.

scholarly journals Comments on "Researcher bias: The use of machine learning in software defect prediction"

2015 ◽  
Author(s):  
Chakkrit Tantithamthavorn ◽  
Shane McIntosh ◽  
Ahmed E Hassan ◽  
Kenichi Matsumoto
Keyword(s):  
Prediction Model ◽  
Strong Association ◽  
Model Performance ◽  
Strong Relationship ◽  
Defect Prediction ◽  
Explanatory Variables ◽  
Software Defect ◽  
The Impact ◽  
The Relationship ◽  
Selection Of

Shepperd et al. (2014) find that the reported performance of a defect prediction model shares a strong relationship with the group of researchers who construct the models. In this paper, we perform an alternative investigation of Shepperd et al. (2014)’s data. We observe that (a) researcher group shares a strong association with the dataset and metric families that are used to build a model; (b) the strong association among the explanatory variables introduces a large amount of interference when interpreting the impact of the researcher group on model performance; and (c) after mitigating the interference, we find that the researcher group has a smaller impact than the metric family. These observations lead us to conclude that the relationship between the researcher group and the performance of a defect prediction model may have more to do with the tendency of researchers to reuse experimental components (e.g., datasets and metrics). We recommend that researchers experiment with a broader selection of datasets and metrics to combat potential bias in their results.

Susceptibility of almond (Prunus dulcis) cultivars to twig canker and shoot blight caused by Diaporthe amygdali

Plant Disease ◽  
2022 ◽  
Author(s):  
Francisco Beluzán ◽  
Xavier Miarnau ◽  
Laura Torguet ◽  
Lourdes Zazurca ◽  
Paloma Abad-Campos ◽  
...  
Keyword(s):  
Agronomic Traits ◽  
Field Tests ◽  
Prunus Dulcis ◽  
Breeding Programs ◽  
Relevant Variables ◽  
Shoot Blight ◽  
Blight Disease ◽  
Cultivar Susceptibility ◽  
The Relationship ◽  
Selection Of

Twenty-five almond cultivars were assessed for susceptibility to Diaporthe amygdali, causal agent of twig canker and shoot blight disease. In laboratory experiments, growing twigs were inoculated with four D. amygdali isolates. Moreover, growing shoots of almond cultivars grafted onto INRA ‘GF-677’ rootstock were used in four-year field inoculations with one D. amygdali isolate. In both type of experiments, inoculum consisted of agar plugs with mycelium, which were inserted underneath the bark and the lesion lengths caused by the fungus were measured. Necrotic lesions were observed in the inoculated almond cultivars both in laboratory and field tests, confirming the susceptibility of all the evaluated cultivars to all the inoculated isolates of D. amygdali. Cultivars were grouped as susceptible or very susceptible according to a cluster analysis. The relationship between some agronomic traits and cultivar susceptibility was also investigated. Blooming and ripening times were found relevant variables to explain cultivars performance related to D. amygdali susceptibility. Late and very late blooming, and early and medium ripening cultivars were highly susceptible to D. amygdali. Our results may provide valuable information that could assist in ongoing breeding programs of this crop and additionally in the selection of cultivars for new almond plantations.

Product and Factory Modeling for Production Rate Determination

1999 ◽  
Author(s):  
S. G. Karthik ◽  
Edward B. Magrab
Keyword(s):  
Production Rate ◽  
Lead Time ◽  
Design Stage ◽  
Manufacturing Processes ◽  
Assembly Structure ◽  
Secondary Manufacturing ◽  
Relationship Of ◽  
The Relationship ◽  
Selection Of ◽  
Made In

Abstract An intelligent graphical user interface that captures a product’s functional and assembly structure and the factory that will make it are described. The results are then used to evaluate a factory’s production rate for the product. The program requires the product to be either a functionally uncoupled or decoupled design. The interface then: (1) implements a visualization of the functionally decomposed product structure; (2) implements an abstraction of a factory; (3) automatically generates candidate primary manufacturing processes and materials that are compatible with each other based on a very small number of attributes; (4) enables the user to make Make/Buy decisions for the components comprising the product; (5) assists the user in the selection of secondary manufacturing processes that are compatible with the primary manufacturing processes and materials for parts made in-house, and specify the vendor and the supply lead time for outsourced parts; (6) enables the specification of alternate materials and manufacturing processes; (7) implements a visual representation of the assembly structure as specified by the user; and (8) partially automates the creation of the assembly structure, and assists in the selection of assembly methods that are compatible with the materials chosen. In addition, the program assists in the design for assembly by: (1) requiring the product development team to think about the assembly process early in the design stage; (2) providing a visualization of the relationship of all components comprising the product to its other components; (3) requiring the specification of the order in which they are to be assembled; and (4) requiring the selection of assembly processes that are compatible with each other and the materials chosen. It also requires the specification of the capabilities of the factory that is going to make one or more of the components of the product, and requires that Make/Buy decisions for the parts comprising the product be made.

Information Systems for the Management of the Organizations

2018 ◽  
pp. 313-346
Author(s):  
Antonio Juan Briones Penalver
Keyword(s):  
Decision Making ◽  
Global Economy ◽  
Relevant Information ◽  
First Century ◽  
Strategic Decision ◽  
Industrial Society ◽  
Strategic Decision Making ◽  
Relationship Of ◽  
The Relationship ◽  
Selection Of

This chapter investigates the main concepts and activities of information in strategic decision-making systems. Since information became the global economy value source for organizations, information assumes a key role in contributing to the development of the performance of organizations through the selection of relevant information for businesses. The relationship of the strategic management of information with business activities contributes to the process of strategic decision making for more effective and efficient decisions. The understanding of the importance of information as a strategic resource in the management of organizations is becoming more important to strategists than the formulation of strategy models of industrial society. In the twenty-first century, no manager will be able to set and implement the strategy successfully without a basic understanding of information for strategic decision making.

scholarly journals Relationship of Whitefly Population Build up with the Spread of TYLCV on Eight Tomato Varieties

1970 ◽  
Vol 4 (1) ◽  
pp. 67-74 ◽  
Author(s):  
AHMA Rahman ◽  
AM Akanda ◽  
AKM Ashraful Alam
Keyword(s):  
Early Stage ◽  
Tomato Yellow Leaf ◽  
Growth Stages ◽  
Whitefly Population ◽  
Key Words Prevalence ◽  
Virus Prevalence ◽  
Tomato Field ◽  
Relationship Of ◽  
Leaf Curl Virus ◽  
The Relationship

The performance of eight tomato varieties namely BARI-T1 (Manik), BARI-T2 (Ratan), BARI-T4, BARI-T5, BARI-T6 (Apurba), BARI-T7 (Chaity), BARI-T11 and BARI-T12 were evaluated in respect to prevalence and spread of TYLCV (Tomato Yellow Leaf curl Virus) in relation to whitefly population buildup in the field. Data were collected on the three growth stages of the plant namely early (transplanting to first flowering) mid (first flowering to first harvesting) and late (first harvesting to last harvesting). The virus prevalence percentage in eight tomato varieties varied depending on early, mid and late stage of infection as well as tomato varieties. It ranged from 42 to 69%. There was a poor and insignificant quadratic polynomial relationship (y = -0.0059x 2 + 0.2826x – 1.5378 & R2 = 0.0962) between temperature and whitefly population build up in tomato field. The relationship between relative humidity and whitefly population build up in the field was found significant but negatively correlated (y = - 0.0321x 2 +4.5518x – 159.44 (R2 = 0.6769). The increase of whitefly population in the field was positively correlated with the spread of TYLCV in the tomato field (y = - 0.0002x 2 + 0.0297x + 1.0626 & R2 = 0.663). The highest and lowest prevalence of TYLCV was recorded in BARI-T6 and BARI-T11, respectively. In all the varieties, virus prevalence was found higher at mid stage followed by late and early stage of infection. Key words: Prevalence, TYLCV, whitefly.

Sign in / Sign up

Export Citation Format

Share Document