scholarly journals Perbedaan Perubahan Warna Permukaan Resin Komposit Nanohybrid Pasca Perendaman dalam Cuko Pempek (Saus Manis dan Asam) dan Jamu Kunyit Asam (Curcuma Domestica Val – Tamarindus Indica)

2019 ◽  
Vol 16 (2) ◽  
pp. 49
Author(s):  
Budiono Budiono ◽  
Nabila Farah Khoirunnisa ◽  
Seffy Vera Faylina
Keyword(s):  
Composite Resin ◽  
Color Change ◽  
Laboratory Research ◽  
Surface Color ◽  
Color Changes ◽  
Average Change ◽  
Post Test ◽  
Experimental Laboratory ◽  
Nanohybrid Composite ◽  
The Difference

The advantages of Nanohybrid composite resin are they have a smooth surface and greater strength, also minimal shrinkage. The disadvantages of composite resin are the color changes extrinsically and intrinsically. The color is changing extrinsically because of the dyes which attached to the surface of the composite resin and the color is changing intrinsically due to oxidation of monomers. Pempek and turmeric-tamarind herbal drink (jamu) are kind of foods and beverages that are very popular among Indonesian people, both of them are causing discoloration on the surface of the composite resin. The objective was to identify the difference composite resin color change after soaking in sweet and sour sauce (cuko pempek) and turmeric-tamarind herbal drink. This study was experimental laboratory research with pre-test and post-test research design. The samples were 32 pieces of Nanohybrid composite resin with the size of 10 x 2 mm. 16 samples of each test were soaked in 5 ml “cuko pempek” and turmeric-tamarind herbal drink in 37 0 C temperature in 7 days. The color change was measured using spechtrophotometer (UV-2401 PC). Results: There are differences between Nanohybrid composite resin surface color change which were soaked in “cuko pempek” and turmeric-tamarind herbal drink which marked in an average change of dE*ab “cuko pempek” (4.7244) and turmeric and tamarind herbal drink (39.1944). The results of independent T-Test also showed a significant color change that is p = 0,000 (p <0.05). This study concluded that there were differences between Nanohybrid composite resin surface color change which are soaked in “cuko pempek” and turmeric-tamarind herbal drink.

scholarly journals Perubahan Warna Permukaan Resin Komposit Nanohybird Pasca Perendaman Dalam Cuko Pempek

2019 ◽  
Vol 8 (1) ◽  
pp. 12
Author(s):  
Nabila Farah Khoirunnisa ◽  
Budiono Budiono ◽  
Lira Wiet Jayanti
Keyword(s):  
Composite Resin ◽  
Color Change ◽  
Composite Resins ◽  
Test Results ◽  
Surface Color ◽  
Color Changes ◽  
Liquid Absorption ◽  
Post Test ◽  
Experimental Laboratory ◽  
Nanohybrid Composite

The development of science, technology and patient demands regarding restorative materials that are colored with teeth is currently higher. Dental-colored restoration materials are widely used, one of which is nanohybrid composite resin. The nanohybrid composite resin has a small and fine particle size of 0.04 um. Nanohybrid composite resins have many advantages, but they also have the disadvantage of liquid absorption properties which can cause discoloration. One of the liquids that cause discoloration is cuko pempek. Objective: To find out the surface color changes of nanohybrid composite resin after immersion in cuko pempek. Methods, an experimental laboratory study with a pre and post test only group design study design. Sample 16 pieces of nanohybrid composite resin measuring 10 x 2 mm. The sample was immersed using pempek cuko as much as 5 ml with a temperature of 37oC for 7 days. Color change is measured with a spechtrophotometer (UV-2401 PC). Results, there was a change in the surface color of nanohybrid composite resin soaked with pempek cuko which marked an average increase in dE*ab before immersion (18.5925) and after immersion (23.3169) with a difference of 4.7844. The paired t test results also showed a significant color change that is p = 0,000 (p <0.05). Conclusion, there is a change in the surface color of the post-immersion nanohybrid composite resin in pempek cuko.

scholarly journals Polishing can reduce discoloration of the nanofiller composite resin filling due to the use of chlorhexidine

2020 ◽  
Vol 9 (3) ◽  
pp. 252-256
Author(s):  
I Gusti Ketut Armiati
Keyword(s):  
Composite Resin ◽  
Color Change ◽  
Chlorhexidine Gluconate ◽  
Control Group ◽  
Control Group Design ◽  
Treatment Groups ◽  
Color Changes ◽  
Long Time ◽  
Cavity Design ◽  
The Difference

Nanofiller composite resin (NCR) restoration has a major problem, namely color changes. Polishing are factors that determi-ne color change and if accompanied by the use of mouthwash for a long time can cause more significant color changes. The 0.2% chlorhexidine gluconate mouthwash is a mouthwash that is often used in the community because it has low toxicity. However, using the chlorhexidine gluconate 0.2% mouthwash in the long term can cause more significant discoloration. This study is aimed to determine the difference between discoloration of polished and unpolished NCR on the soaking of 0.2% chlorhexidine gluconate mouthwash. This purely experimental research with a pretest and posttest with control group design, using 24 samples of premolar teeth prepared with class II cavity design and then filled with NCR. The samples were then di-vided into 4 treatment groups, namely polished and non-polished NCR, 0.2% chlorhexidine gluconate mouthwash and aqua-dest. Soaking was carried out 24 hours a day for 5 days in an incubator at 37ºC. Color changes of each group were measured using shade guide Vita Classical. The results were analyzed descriptively and the normality was tested by the Shapiro-Wilk and Levene's homogenity test with significance value of 0.05. Mann-Whitney for the different test. Based on the results of this study, it is concluded that the discoloration of the polished NCR was smaller than that was not polished on the soaking of chlorhexidine mouthwash 0.2%

Influence of Hydrogen Peroxide Bleaching Gels on Color, Opacity, and Fluorescence of Composite Resins

2012 ◽  
Vol 37 (5) ◽  
pp. 526-531 ◽  
Author(s):  
CRG Torres ◽  
CF Ribeiro ◽  
E Bresciani ◽  
AB Borges
Keyword(s):  
Hydrogen Peroxide ◽  
Composite Resin ◽  
Color Change ◽  
Composite Resins ◽  
Control Group ◽  
Peroxide Bleaching ◽  
Color Changes ◽  
Tukey Test ◽  
Bleaching Gels ◽  
Bleaching Treatment

SUMMARY The aim of the present study was to evaluate the effect of 20% and 35% hydrogen peroxide bleaching gels on the color, opacity, and fluorescence of composite resins. Seven composite resin brands were tested and 30 specimens, 3-mm in diameter and 2-mm thick, of each material were fabricated, for a total of 210 specimens. The specimens of each tested material were divided into three subgroups (n=10) according to the bleaching therapy tested: 20% hydrogen peroxide gel, 35% hydroxide peroxide gel, and the control group. The baseline color, opacity, and fluorescence were assessed by spectrophotometry. Four 30-minute bleaching gel applications, two hours in total, were performed. The control group did not receive bleaching treatment and was stored in deionized water. Final assessments were performed, and data were analyzed by two-way analysis of variance and Tukey tests (p&lt;0.05). Color changes were significant for different tested bleaching therapies (p&lt;0.0001), with the greatest color change observed for 35% hydrogen peroxide gel. No difference in opacity was detected for all analyzed parameters. Fluorescence changes were influenced by composite resin brand (p&lt;0.0001) and bleaching therapy (p=0.0016) used. No significant differences in fluorescence between different bleaching gel concentrations were detected by Tukey test. The greatest fluorescence alteration was detected on the brand Z350. It was concluded that 35% hydrogen peroxide bleaching gel generated the greatest color change among all evaluated materials. No statistical opacity changes were detected for all tested variables, and significant fluorescence changes were dependent on the material and bleaching therapy, regardless of the gel concentration.

scholarly journals Fusarium graminearum Colors and Deoxynivalenol Synthesis at Different Water Activity

Foods ◽  
2018 ◽  
Vol 8 (1) ◽  
pp. 7 ◽  
Author(s):  
Edgar Cambaza ◽  
Shigenobu Koseki ◽  
Shuso Kawamura
Keyword(s):  
Fusarium Graminearum ◽  
Color Change ◽  
High Growth ◽  
Cereal Crops ◽  
Color Analysis ◽  
Surface Color ◽  
Color Changes ◽  
White Mycelium ◽  
Imagej Software ◽  
Inverse Proportionality

Deoxynivalenol (DON) is a well-known mycotoxin, responsible for outbreaks of gastrointestinal disorders in Japan. Fusarium graminearum, a parasite of cereal crops, produces this toxin and this is one of the reasons why it is important to understand its metabolism. It is possible to predict the mold’s color change and the quantity of DON synthesized throughout its lifecycle. Furthermore, aw has been found to affect the amount of DON. This study aimed to analyze the potential of F. graminearum surface color as a predictor of DON concentration at aw = 0.94, 0.97, and 0.99. Thus, 36 specimens were incubated at 25 °C, 12 at each aw. After 4, 8, 12, and 16 days, three specimens from each aw were collected for color analysis and DON quantification. For color analysis, photos were taken and red, green and blue (RGB) channels were measured on ImageJ software. DON was quantified through liquid chromatography (HPLC). Color changes were only observed at aw = 0.99 because at lower aw the molds presented high growth of white mycelium. Yet, DON increased in all cases. It was only possible to relate the colors with DON concentration at aw = 0.99, where they presented inverse proportionality.

scholarly journals Influence of Mechanical and Chemical Degradation in the Surface Roughness, Gloss, and Color of Microhybrid Composites

2017 ◽  
Vol 18 (4) ◽  
pp. 283-288 ◽  
Author(s):  
Cleidiel AA Lemos ◽  
Silvio J Mauro ◽  
Paulo H dos Santos ◽  
André LF Briso ◽  
Ticiane C Fagundes
Keyword(s):  
Surface Roughness ◽  
Clinical Significance ◽  
Composite Resin ◽  
Color Change ◽  
Wilcoxon Test ◽  
Chemical Degradation ◽  
Color Changes ◽  
Final Data ◽  
Properties Of Materials ◽  
Spearman Test

ABSTRACT Aim The aim of this study was to investigate the association of different degradations on the roughness, gloss, and color changes of microhybrid composites. Materials and methods Ten specimens were prepared for Charisma, Amelogen Plus, Point 4, and Opallis resins. Surfaces were polished and baseline measurements of roughness, gloss, and color were recorded. Specimens were then submitted to chemical and mechanical challenges, and the specimens were reevaluated. Roughness and gloss were analyzed by Kruskal – Wallis and Dunn's test (p < 0.05). Color change (ΔE) was analyzed by one-way analysis of variance and Tukey's tests (p < 0.05). The initial and final data were compared using the Wilcoxon test (p < 0.05). Spearman test checked the correlation between the roughness and gloss (p < 0.05). Results Regarding surface roughness and gloss, there was no difference between composites before challenges. However, all composites showed a significant increase of roughness after challenges, with highest values for Charisma. The gloss was influenced by challenges, evidencing the best gloss for Point 4. Charisma showed the highest value of color change. There was no correlation between surface roughness and gloss for the initial analysis, and after the challenges. Conclusion Composites were influenced by association of challenges, and Charisma showed the highest changes for roughness, gloss, and color. Clinical significance The type of composite resin influenced the properties of materials, which are surface roughness, gloss, and color change. The dentist should be aware of the performance of different brands, to choose the correct required composite resin for each type of patient or region to be restored. How to cite this article Lemos CAA, Mauro SJ, dos Santos PH, Briso ALF, Fagundes TC. Influence of Mechanical and Chemical Degradation in the Surface Roughness, Gloss, and Color of Microhybrid Composites. J Contemp Dent Pract 2017;18(4):283-288.

scholarly journals Spectrophotometric Evaluation of Enamel Color Variation Using Infiltration Resin Treatment of White Spot Lesions at One Year Follow-Up

2020 ◽  
Vol 8 (2) ◽  
pp. 35 ◽  
Author(s):  
Roberto Lo Giudice ◽  
Frank Lipari ◽  
Francesco Puleio ◽  
Angela Alibrandi ◽  
Fabrizio Lo Giudice ◽  
...  
Keyword(s):  
Color Change ◽  
Statistical Significance ◽  
Color Variation ◽  
White Spot ◽  
White Spot Lesions ◽  
Color Changes ◽  
The Difference ◽  
One Year ◽  
The Stability

The aim of this study is to evaluate the color changes and the stability at a 1-year follow-up of white spot lesions (WSLs) treated with an infiltrating technique by using etching and TEGDMA resin. The color of 22 white spot lesions and the sound adjacent enamel (SAE) were assessed with a spectrophotometer at T0 (baseline), T1 (after treatment), and T2 (1 year after). The color change ΔE (WSLs-SAE) at T0 vs. T1 were compared to evaluate the camouflage effect efficiency, and at T1 vs. T2 to assess the stability of outcomes. To evaluate the effect on the treatment outcome of gender, the presence or not of previous orthodontic treatment, WSLs onset more/less than 10 years, the age of the patient, and the ΔE WSL (T0 vs. T1) was analyzed. The difference between ΔE (WSLs-SAE) at T0 and T1 resulted in statistical significance (p < 0.01). No statistical difference was found between ΔE (WSLs-SAE) at T1 vs. T2. The variables considered showed no statistical differences in treatment outcomes. The results of our investigation show that the technique used is immediately effective and the camouflage effect keeps up and steady one year after treatment. Such results do not appear to be influenced by analyzed clinical variables.

scholarly journals UJI KEKERASAN RESIN KOMPOSIT AKTIVASI SINAR DENGAN BERBAGAI JARAK PENYINARAN

e-GIGI ◽  
2015 ◽  
Vol 3 (2) ◽  
Author(s):  
Jimmy Allorerung ◽  
P. S. Anindita ◽  
Paulina N. Gunawan
Keyword(s):  
Visible Light ◽  
Light Source ◽  
Vickers Hardness ◽  
Sampling Method ◽  
Composite Resin ◽  
Composite Surface ◽  
Purposive Sampling ◽  
Hardness Tester ◽  
Post Test ◽  
Nanohybrid Composite

Abstract: Composite resin is a dental material which is used to fix the caries teeth because it have good esthetic and hardness. Visible light cured (VLC) composite resin hac better polymerization than chemical reaction composite resin. However, it does not have any abutment, therefore, the distance between light source and the composite surface is mostly ignored by the operator. Lightning process is very important to obtained good polymerization, so that the composite has enough hardness to hold back human masticate pressure. Composite which does not have enough hardness will be easily cracked. This study aimed to find out the correct distance of polymerization so that the composite resin has enough hardness to hold back human masticate pressure. This study used a post-test only design group and was conducted at the Laboratory of Metalurgy University of Sam Ratulangi. There were 27 samples of nanohybrid composite resin obtained by using a purposive sampling method. The measurement used was the Vickers method and micro Vickers hardness tester. The results showed that the group that had the highest hardness value was the first group with a lightning distance of 0 mm or light source touching composite resin surface, the value of hardness was 841.49 N/mm2. This value step by step decreased because the lightning distance increased, so that the lowest hardness value is 290,95 N/mm2 which on ninth group. Conclusion: The lightning distance of nanohybrid composite resin which could hold back the maximum human masticate pressure was on distance 0-6 mm.Keyword : distance of lightning, nanohybrid composite resin, hardness value.Abstrak: Resin komposit merupakan bahan tumpatan yang sering digunakan dalam kedokteran gigi karena memiliki nilai estetis serta kekerasan yang baik. Resin komposit aktivasi sinar berpolimerisasi lebih baik daripada resin komposit aktivasi kimia, tetapi alat visible light cured (VLC) yang digunakan tidak memiliki dudukan sehingga jarak antara sumber sinar dengan permukaan komposit saat penyinaran sering diabaikan. Proses penyinaran sangat penting agar terjadi polimerisasi yang baik sehingga komposit memiliki kekerasan yang cukup untuk menahan tekanan kunyah manusia. Kekerasan yang tidak cukup dapat menyebabkan komposit mengalami cracking atau pecahnya tumpatan didalam mulut. Tujuan penelitian ini untuk mengetahui jarak penyinaran yang tepat agar resin komposit memiliki kekerasan yang cukup untuk menahan tekanan kunyah manusia. Metode penelitian yang digunakan adalah metode post-test only design group yang diukur pada resin komposit jenis nanohibrid dan dilakukan di Laboratorium Metalurgi Jurusan Teknik Mesin Universitas Sam Ratulangi, dengan sampel sebanyak 27 sampel. Pengambilan sampel dilakukan dengan metode purposive sampling dan pengukuran kekerasan komposit menggunakan metode Vickers dan alat micro vickers hardness tester. Hasil penelitian menunjukan bahwa kelompok yang memiliki nilai kekerasan tertinggi terdapat pada kelompok pertama dengan jarak penyinaran 0 mm atau sumber sinar menyentuh permukaan komposit dengan nilai kekerasan 841,49 N/mm2. Nilai kekerasan ini secara bertahap menurun seiring dengan bertambah jauh jarak penyinaran, sehingga nilai kekerasan paling rendah terdapat pada kelompok penyinaran 8 mm yaitu 230,95 N/mm2. Kesimpulan dari penelitian ini yaitu jarak penyinaran terhadap resin komposit jenis nanohibrid sehingga resin komposit memiliki kekerasan yang cukup untuk menahan tekanan kunyah maksimal manusia berkisar pada jarak 0-6 mm.Kata kunci : jarak penyinaran, resin komposit nanohibrid, nilai kekerasan

scholarly journals Pengaruh Kontrasepsi Suntik DMPA Terhadap Kenaikan Berat Badan Tikus Betina Galur Wistar

2018 ◽  
Vol 3 (1) ◽  
Author(s):  
Dwi Retna Prihati
Keyword(s):  
Body Weight ◽  
Test Group ◽  
Laboratory Research ◽  
Control Group ◽  
Female Rat ◽  
Wistar Strain ◽  
Significant Difference ◽  
Post Test ◽  
Experimental Laboratory ◽  
Rat Strain

Abstract: DMPA Injectable Contraception, Body Weight. The purpose of this study to determine the effect of contraception DMPA injection to BB in female blood wistar strain female. The benefits of this study are expected to increase public knowledge about injectable contraception especially related to the side effects of weight gain. This type of research is an experimental laboratory. Research design Randomized pre-post test group with control, the sample size of 10 adult female mice Wistar strain divided into 2 groups. Data were analyzed by independent T test. Significant value of p <0.05. The result of this research is there is significant difference between control group and DMPA contraception treatment group (p = 0,008). In conclusion contraceptive DMPA affects body weight wistar female rat strain.

scholarly journals Gambaran Histopatologi Pankreas Tikus Putih (Rattus norvegicus) Pasca Perlakuan Iskemia-Reperfusi Ginjal

2019 ◽  
Vol 13 (1) ◽  
pp. 58
Author(s):  
Elva Rosiana ◽  
Wiwit Ade Fidiawati ◽  
Darmawi Darmawi
Keyword(s):  
Tissue Damage ◽  
Control Treatment ◽  
Laboratory Research ◽  
Control Group ◽  
Control Group Design ◽  
Group Design ◽  
White Rats ◽  
Post Test ◽  
Experimental Laboratory ◽  
Histopathologic Feature

Ischemic-reperfusion injury is defined by a condition of hypoperfusion in the spesific organ followed by reperfusion(reoxygenation) inducing tissue damage. Tissue damage produces reactive oxygen species (ROS) leading to oxidativestress condition. Oxidative stress mediate the lipid peroxidation reactions, harm the cell and finally facilitate the celldeath. The aim of this study was to evaluate the histopathologic feature of white rat’s pancreas post renal ischemiareperfusion.This study was an experimental laboratory research with post-test-only control group design including 20male white rats. Rats were divided into 5 groups, control, treatment 1 (45 minutes ischemia), treatment 2 (45 minutesischemia followed by 1 hour reperfusion), treatment 3 (45 minutes ischemia followed by 2 hours reperfusion) andtreatment 4 (45 minutes ischemia followed by24 hours reperfusion). We found the change of the histopathologicalcharacteristics of white rat’s pancreas in term of edema, leukocyte infiltration and vacuolization.

scholarly journals JUS SEMANGKA MENURUNKAN NEUTROFIL TIKUS JANTAN GALUR WISTAR YANG TERPAPAR ASAP ROKOK

2018 ◽  
Vol 11 (2) ◽  
pp. 166
Author(s):  
Rizky Prihandari ◽  
Lailatul Muniroh
Keyword(s):  
Cigarette Smoke ◽  
Hazardous Substances ◽  
Male Rats ◽  
Laboratory Research ◽  
Control Group ◽  
Control Group Design ◽  
Treatment Groups ◽  
Wistar Strain ◽  
Post Test ◽  
Experimental Laboratory

Cigarette smoke contains many hazardous substances and free radical which affect respiratory system. Watermelon “Sugar Baby” juice contain lycopene as antiinfl ammation. The aim of this research was to analyze the effect of watermelon as antiinfl ammation toward neutrophils count in wistar strain male rats exposed by  cigarette smoke. This study was an experimental laboratory research with pre and post test control group design. Sample consisted of 24 wistar strain male rats with ±150-230 grams weight and 3 months old which were divided into four groups. Control group was given placebo (aquadest) and treatment groups were given w atermelon juice with terraced quantity (1.5 ml, 2.5 ml, and 3.5 ml). Every group was given two sticks of cigarette smoked per day during two weeks then smoked with treatment during one week. Neutrophil from peripheral smear was observed by manual method and statistically analyzed using Anova Mixed Design and continued with One Way Anova. The result showed signifi cant increased of  neutrophil at second observation on control group (p=0.002) and treatment groups (p=0.000). Signifi cance decreased also found in the treatment groups’s at third observation p=0.000. Signifi cant between each group p= 0.017. There was signifi cant different between control and treatment groups but there was no signifi cant different between each treatment groups. This study concluded that there was decreased of  neutrophil in wistar strain male rats which were given w atermelon juice 1.5 ml, 2.5 ml, and 3.5 ml during infl ammation. 3.5 ml w atermelon juice which were given showed better result as antiinfl ammation..

Sign in / Sign up

Export Citation Format

Share Document