TECHNOLOGICAL ASPECTS OF APPLICATION OF THE PHYTOSORBENT WITH NANOTUBES IN THE PROCESS OF ADSORPTIVE OIL PURIFICATION

2021 ◽  
pp. 59-66
Author(s):  
L. Krichkovskaya ◽  
Essam Elnaggar ◽  
V. Dubonosov
Keyword(s):  
Raw Materials ◽  
Water Solution ◽  
Low Cost ◽  
Agricultural Waste ◽  
Quality Parameters ◽  
Raw Material ◽  
Effect Of Temperature ◽  
Plant Raw Materials ◽  
Fractal Clusters ◽  
Technological Stage

In the present article importance of adsorptive purification of vegetable oils is shown as the most responsible technological stage. Insufficiency of scientific developments in the scope of domestic sorbents in Ukraine is pointed out. The phytosorbent with nanotubes from sunflower peel improving some quality parameters of non-refined sunflower and soybean oils to standard values for refined oils has been offered. Some literature data on the main characteristics of a number of sorption materials (carbonaceous, natural, fibrous, and sorbents obtained from agricultural waste - Corylus avellana Lambert nuts) as a result of heat treatment are analyzed. The main sorption properties are considered; dignity; limitations. The effect of temperature on the productivity of pyrolysis of plant raw materials and the properties of the resulting carbonizates in the temperature range 150-600 °C was investigated. The duration of exposure of materials at the final temperature of the process in all experiments was the same and amounted to 1 h. Analysis of the experimental data allows us to conclude that temperature is the main factor affecting the process of carbonization of the initial plant material. Regardless of the pyrolysis atmosphere, the yield of the product from plant raw materials decreases with a significant increase in temperature. At present, the main raw material for the industrial production of adsorbents is in many studies organic substances - wood, fossil coal, peat, remnants of the processing of agricultural raw materials due to their low cost and large amount. Solving the problem of creating sorbents based on plant raw materials with the inclusion of hydrated fullerenes in their composition solved the problem of creating sorbents and environmental problems, since the waste did not always find a useful application. Concentration of water solution of hydrated C60, fast C60FWS, є molecular-coloidal systems and spherical fractal clusters, structural unit of which is micro-hydrophilic, high-hydrophilic supramolecular complex, molecules can be folded to fit into ) 24-hydration of fullerene C60 (C60HyFn). The hydrated cultivation is set in its own well-ordered, structurally heterogeneous watery middle, in which the directness and kinetics of chemical processes are seen in such, that it is necessary to be washed in order to clean.

TECHNOLOGICAL ASPECTS OF HIGH QUALITY RAW MATERIAL OBTAINING FOR PECTIN PRODUCTION

1970 ◽  
pp. 47-50
Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun
Keyword(s):  
Raw Materials ◽  
Thermal Characteristics ◽  
Environmental Safety ◽  
Raw Material ◽  
High Quality ◽  
Temperature Conductivity ◽  
Drying Temperature ◽  
Plant Raw Materials ◽  
Gel Forming Ability

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.

Feasibility of cereal straw for industrial utilization in Minnesota

2000 ◽  
Vol 15 (1) ◽  
pp. 2-8 ◽  
Author(s):  
N.C. Wagner ◽  
S. Ramaswamy ◽  
U. Tschirner
Keyword(s):  
Animal Feed ◽  
Raw Materials ◽  
Low Cost ◽  
Economic Feasibility ◽  
Raw Material ◽  
Cereal Straw ◽  
Industrial Utilization ◽  
Industrial Use ◽  
On Farm ◽  
And Storage

AbstractA pre-economic feasibility study was undertaken to determine the potential of cereal straw for industrial utilization in Minnesota. Specifically, utilizing straw for pulp and paper manufacture was of interest. The availability of cereal straw fiber supplies at various locations across the state of Minnesota, along with pre-processing issues such as transportation, harvesting, handling, and storage, are discussed and priced. The greatest economic advantage of straw for industrial use appears to be the low cost of the raw material compared to traditional raw materials. This also provides an excellent opportunity for additional income for farmers. The methodology and information provided here should be helpful in evaluating the feasibility of utilizing straw for other industrial purposes in other parts of the world. However, in some Third World countries, long-standing on-farm, traditional uses of cereal straws for fuel, fiber, and animal feed may limit their availability for industrial utilization.

TECHNOLOGY FOR OBTAINING PECTIN CONCENTRATE FROM ROSEHIP FRUITS

2021 ◽  
pp. 87-90
Author(s):  
М.Ж. Кизатова ◽  
Д.А. Абдуллаева
Keyword(s):  
Medicinal Plant ◽  
Raw Materials ◽  
Raw Material ◽  
Plant Raw Materials ◽  
Plant Raw Material ◽  
Pectin Substances

Статья посвящена важности пектиновых веществ, а также расширению сферы использования лекарственного растительного сырья. В качестве лекарственного растительного сырья представлены технологии получения пектинового экстракта из плодов шиповника, которые встречаются на территории Казахстана 25 видов. Применение пектина в медицине. The article is devoted to the importance of pectin substances, as well as to the expansion of the use of medicinal plant raw materials. As a medicinal plant raw material, technologies for obtaining pectin extract from rosehip fruits, which are found in 25 species on the territory of Kazakhstan, are presented. The use of pectin in medicine

scholarly journals New methods of acid hydrolysis of cellulose and plant raw materials

2021 ◽  
Vol 57 (1) ◽  
pp. 119-128
Author(s):  
V. S. Boltovsky
Keyword(s):  
Acid Hydrolysis ◽  
Plant Biomass ◽  
Raw Materials ◽  
Agricultural Waste ◽  
Feed Additives ◽  
Process Conditions ◽  
Catalytic Systems ◽  
Plant Raw Materials ◽  
Hydrolysis Of Cellulose ◽  
Hydrolysis Of

Prospects for the development of hydrolysis production are determined by the relevance of industrial use of plant biomass to replace the declining reserves of fossil organic raw materials and increasing demand for ethanol, especially for its use as automobile fuel, protein-containing feed additives that compensate for protein deficiency in feed production, and other products. Based on the review of the research results presented in the scientific literature, the analysis of modern methods of liquid-phase acid hydrolysis of cellulose and various types of plant raw materials, including those that differ from traditional ones, is performed. The main directions of increasing its efficiency through the use of new catalytic systems and process conditions are identified. It is shown that the most promising methods for obtaining monosaccharides in hydrolytic processing of cellulose and microcrystalline cellulose, pentosan-containing agricultural waste and wood, are methods for carrying out the process at elevated and supercritical temperatures (high-temperature hydrolysis), the use of new types of solid-acid catalysts and ionic liquids. 

scholarly journals WOOD COMPONENTS AS SOURCES OF PENTO-CONTAINING RAW MATERIALS FOR SYNTHESIS OF USEFUL COMPOUNDS, PRODUCTS AND REAGENTS

2021 ◽  
Vol 64 (3) ◽  
pp. 107-115
Author(s):  
Irina A. Chetvertneva ◽  
Oleg Kh. Karimov ◽  
Galina A. Teptereva ◽  
Natalia S. Tivas ◽  
Eldar M. Movsumzade ◽  
...  
Keyword(s):  
Raw Materials ◽  
Condensation Reaction ◽  
Agricultural Waste ◽  
Monomer Unit ◽  
Paper Industry ◽  
Raw Material ◽  
Chemical Transformations ◽  
Covalent Bonds ◽  
Industry Waste ◽  
Wood Processing

The paper considers the main components and products of wood processing, agricultural waste, pulp and paper industry waste and qualifies them as sources of pentose-containing resource-renewable domestic raw materials. The article describes in detail the structural components of wood as a natural polymer, which contains aromatic and carbohydrate parts. It is noted that these poly-mers are promising as raw materials for the production of useful chemical products. The role of lignin, cellolose and hemicellulose in the design of mechanical and structural properties of wood is considered. The article considers the features of the sulfonation reactions of the lignin monomer unit depending on the pH of the medium: acidic, neutral and alkaline. There are three main reac-tions that occur simultaneously with lignin in the process of wood delignification during sulfite cooking, such as the sulfonation reaction, the hydrolytic destruction reaction, and the condensation reaction. It is shown that the lignin-hemicellulose matrix contains three types of interconnected mesh structures: the lignin itself; a network of covalent bonds of lignin with hemicelluloses, and a network whose structure is obtained due to the hydrogen bond and the forces of the physical inter-action of lignin and hemicelluloses. The features of chemical transformations of the monomeric aromatic link of lignosulfonate – phenylpropane unit in the processes of wood delignification, the main chemical reactions of wood raw material delignification under the conditions of sulfite and neutral-sulfite brews are shown. The method of quantitative determination of monosaccharides in the composition of the carbohydrate part is proposed.

TECHNOLOGY OF PLANT RAW MATERIALS MICROBIOLOGICAL PROCESSING WITH PLEUROTUS STRAINS FOR FEED PRODUCTS PRODUCTION

2020 ◽  
pp. 405-414
Author(s):  
Veronika Valentinovna Tarnopol’skaya ◽  
Tat'yana Vasil'yevna Ryazanova ◽  
Natal'ya Yur'yevna Demidenko ◽  
Oksana Nikolayevna Eryomenko
Keyword(s):  
Solid State ◽  
Solid State Fermentation ◽  
Solid Phase ◽  
Raw Materials ◽  
Jerusalem Artichoke ◽  
Seed Stock ◽  
Raw Material ◽  
Pine Sawdust ◽  
Plant Raw Materials ◽  
Pure Cultures

A technology for pilot production of feed products via microbiological conversion of plant raw materials (mixed substrate of pine sawdust and vegetative part of Jerusalem artichoke) by Plerotus ostreatus PO-4.1 and Pleurotus djamor PD-3.2 strains is developed. The technology includes hydrodynamic activation of substrate at the seed stock production stage. The overall technology includes three key stages: submerged fermentation of pure cultures of production strains; submerged-solid phase fermentation of hydrodynamicly activated plant raw materials for seed stock production; solid-state fermentation of mechanically ground plant substrate for feed products production. A successful approbation of submerged-solid state fermentation of production strains on media containing 3% of hydrodynamicly activated raw materials allowed for obtaining seed stock with 14.5 g/l yield of submerged mycelium biomass fully adopted for this type of substrate. Further use of this seed stock biomass at the solid state fermentation stage makes the overall process duration three times shorter compared to existing technologies for direct wood waste bioconversion. The pilot plant results show valuable practicability of plant raw material hydrodynamic activation with the purpose of enhancing its bioaccessibility with consequent increase in degree of microbiological conversion. The product of bioconversion contains 14–16% of protein, biofiber, vitamins and minerals and could be considered for successful use as feed by agricultural enterprises.

Optimal Design and Techno-Economic Analysis for Corncob Particles Briquettes: A Literature Review of the Utilization of Agricultural Waste and Analysis Calculation

2021 ◽  
Author(s):  
Asep Bayu Dani Nandiyanto ◽  
Nissa Nur Azizah ◽  
Gabriela Chelvina Santiuly Girsang
Keyword(s):  
Optimal Design ◽  
Literature Review ◽  
Economic Analysis ◽  
Large Scale ◽  
Net Present Value ◽  
Raw Materials ◽  
Agricultural Waste ◽  
Raw Material ◽  
Variable Cost ◽  
Scale Production

Corncob is usually disposed of directly as waste, creating problems in the environment, while it can be converted into valuable materials. This research aimed to evaluate the literature review on briquette production from agricultural waste (using non-binder and cold press with a binder) and the current works on techno-economic analysis, to propose an optimal design for the production of briquette from corncob waste, and to perform a techno-economic analysis based on the selected optimal processing method. The engineering perspective based on stoichiometry and mass balance showed the potential corncob briquette manufacture in both home and large scales due to the possible use of inexpensive and commercially available equipment and raw materials. The economic perspective [based on several economic evaluation factors (i.e., gross profit margin, payback period, break-even point, cumulative net present value, return of investment, internal rate return, and profitability index) under ideal and non-ideal conditions by considering internal (i.e., sales, raw materials, utilities, and variable cost) and external aspects (i.e., tax)] confirmed the prospective development of the project in the large-scale production with a lifetime of more than 18 years. The main issue in the project is the raw material (i.e. tapioca flour), giving the most impact on the project’s feasibility. Even in severe conditions, the project is feasible. The great endurance was also confirmed in the case of a higher tax rate. This study demonstrates the importance of producing corncob-based briquettes for improving the economic value and giving alternatives for problem solvers in the utilization of agricultural waste.

Low-Cost Synthesis and Morphology Control of Magnesium Oxysulfate Hydrate Whiskers

2014 ◽  
Vol 936 ◽  
pp. 986-991
Author(s):  
Chuan Hui Gao ◽  
Li Ding ◽  
Yu Min Wu ◽  
Chuan Xing Wang ◽  
Jun Xu
Keyword(s):  
Electron Microscope ◽  
Raw Materials ◽  
Low Cost ◽  
Hydrothermal Process ◽  
Control Agent ◽  
Raw Material ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Magnesium Oxysulfate

A low-cost raw material, bittern obtained from the production process of sea salt, was used to prepare magnesium oxysulfate hydrate (MgSO4·5Mg (OH)2·2H2O, abbreviated as 152MOS) whiskers via hydrothermal synthesis with ammonia and magnesium sulfate as the other starting raw materials. The bittern was firstly filtered and then used directly without de-coloring. X-ray powder diffraction (XRD), transmission electron microscope (TEM), selected area electron diffraction (SAED), energy dispersive X-ray spectroscopy (EDX) and scanning electron microscope (SEM) were employed to investigate the composition and morphology of the products. It was found that the 152MOS whiskers synthesized from bittern at 190°C for 3 hours exhibited fanlike morphology. The formation of the fanlike whiskers was inhibited and most of the whiskers presented as single fibers when ethanol was used as crystal control agent in the hydrothermal process. From the two-dimensional steps observed at tips of the whiskers, a possible growth mechanism was speculated that it was the extension of dislocations that made the growth of the whiskers.

scholarly journals THE STUDY OF THE FLAVONOIDS AND ANTIDEPRESSANT ACTIVITY OF THE LEAVES AND LIQUID EX-TRACT OF CRATAEGUS SUBMOLLIS

2018 ◽  
pp. 105-112 ◽  
Author(s):  
Владимир (Vladimir) Александрович (Aleksandrovich) Куркин (Kurkin) ◽  
Елена (Elena) Николаевна (Nikolayevna) Зайцева (Zaitseva) ◽  
Татьяна (Tat'yana) Владимировна (Vladimirovna) Морозова (Morozova) ◽  
Ольга (Ol'ga) Евгеньевна (Evgen'evna) Правдивцева (Pravdivtseva) ◽  
Елена (Elena) Владимировна (Vladimirovna) Авдеева (Avdeeva) ◽  
...  
Keyword(s):  
Russian Federation ◽  
Raw Materials ◽  
Antidepressant Activity ◽  
Raw Material ◽  
High Yield ◽  
Total Flavonoids ◽  
Plant Raw Materials ◽  
Extraction Solvent ◽  
Optimum Extraction ◽  
Additional Point

Nowadays flowers and fruits of various types of hawthorn are widely used as cardiotonic drugs in Russian Federation. In our opinion a promising species for harvesting raw materials is Quebec hawthorn (Crataegus submollis Sarg., Rosaceae). Quebec hawthorn is successfully cultivated on the territory of the Russian Federation and is characterized by rapid growth and high yield in comparison with wild species. An additional point is that one of the possible types of raw materials are hawthorn leaves widely used abroad. Quebec hawthorn leaves contain flavonoids, among which there is a hyperoside. The maximum of the absorption curve of the extract solution of Quebec hawthorn leaves with an aluminum chloride solution of 412 nm. We have developed a quantification method for determination the total flavonoids in the Quebec hawthorn leaves calculated as hyperoside. It was established that the optimum extraction solvent for this raw material is 70% ethanol. The level of content and dynamics of accumulation of the total flavonoids in the Quebec hawthorn leaves during the growing season of 2017 was studied. The maximum content of total flavonoids in the Quebec hawthorn leaves (3.12 ± 0.05% calculated on hyperoside) is observed in May, during plant flowering. The liquid extract based on Quebec hawthorn leaves possesses moderate antidepressant activity. For this reason, leaves of Quebec hawthorn leaves are promising medicinal plant raw materials.

scholarly journals THE DEVELOPMENT OF TECHNOLOGY FOR OBTAINING OF TENESTROL SUBSTANCE OF ESTROGENIC AC-TION FROM THE AERIAL PARTS OF FERULA TENUISECTA

2019 ◽  
pp. 269-276
Author(s):  
Мунирахон (Munirakhon) Ахматхон кизи (Ahmatkhon kizi) Маматханова (Mamatkhanova) ◽  
Равшанжон (Ravshanzhon) Муратджанович (Muratdzhanovich) Халилов (Khalilov) ◽  
Любовь (Lyubov') Дмитриевна (Dmitrievna) Котенко (Kotenko) ◽  
Ахматхон (Ahmatkhon) Умарханович (Umaralievich) Маматханов (Mamatkhanov)
Keyword(s):  
Aerial Part ◽  
Raw Materials ◽  
Water Solution ◽  
Weight Ratio ◽  
Volume Ratio ◽  
Raw Material ◽  
Alcohol Extract ◽  
Aerial Parts ◽  
Green Coloration ◽  
Water Alcohol

Extraction of the sum of esters of the sesquiterpene alcohols from the aerial part of Ferula tenuisecta and purification of obtained extract were studied, allowing in following to get the final substance without green coloration. It was determined the optimum adsorbent – actuated coal and its amount for removing the green coloration of water-alcohol extract from used raw materials. It was found that for the purification of the bottoms of water-alcohol extract, five-fold treatment with extractive petrol in a volume ratio of water solution – solvent 2:1 is necessary, and for extraction esters from a purified water solution – three-fold extraction with ethyl acetate in a volume ratio of water solution – solvent 2:1. It was used a filler to effective drying the substance of Tenestrol. The microcrystalline cellulose in a weight ratio from 1:8 to 1:10 to the raw material was chosen as the optimum filler. Technology for obtain of substance of esters of sesquiterpene alcohols with estrogenic action from the aerial part of Ferula tenuisecta was developed and called “Tenestrol”. From this technology substance "Tenestrol" with yield of 3.8% by weight of the raw material is obtained, which contains not less 20% of the esters.

Sign in / Sign up

Export Citation Format

Share Document