scholarly journals The Binding Characteristics of Sediment-Derived Dissolved Organic Matter with Ceftazidime: A Microstructural and Spectroscopic Correlation Study

Author(s):  
Xuewei Cai ◽  
Kemin Qi ◽  
Xiaoli Zhang ◽  
Xiaoyun Xie ◽  
Zhaowei Wang

Abstract This research focused on the characterization of sediment-derived DOM (SDOM) extracted from sediment of Yellow River and the binding behaviors of ceftazidime (CAZ) with the presence of SDOM. The morphology, surface composition and structure of SDOM and the complexation between SDOM and CAZ in terms of component features, binding capacity and sequence were studied by multiple approaches. Results showed that SDOM was in situ autochthonous-dominated with a low weight-average molecular weight and aromaticity. The multiple morphological characteristics, high surface oxygen contents (53.49%) and more aliphatic of SDOM were further confirmed. Studies on SDOM-CAZ interaction suggested that the functional groups and chemical compositions of SDOM were susceptible to CAZ. In more detail, the aromatic protons and aliphatic protons of CAZ impacted significantly and the binding between CAZ and SDOM might relate to noncovalent. The protein-like fractions were considered to primary participant and the aromatics and amides as mainly active sites interaction with CAZ. These findings have significant implications on the environmental fate of cephalosporin antibiotics and that of sediment-derived DOM.

Author(s):  
Alexis T. Bell

Heterogeneous catalysts, used in industry for the production of fuels and chemicals, are microporous solids characterized by a high internal surface area. The catalyticly active sites may occur at the surface of the bulk solid or of small crystallites deposited on a porous support. An example of the former case would be a zeolite, and of the latter, a supported metal catalyst. Since the activity and selectivity of a catalyst are known to be a function of surface composition and structure, it is highly desirable to characterize catalyst surfaces with atomic scale resolution. Where the active phase is dispersed on a support, it is also important to know the dispersion of the deposited phase, as well as its structural and compositional uniformity, the latter characteristics being particularly important in the case of multicomponent catalysts. Knowledge of the pore size and shape is also important, since these can influence the transport of reactants and products through a catalyst and the dynamics of catalyst deactivation.


2021 ◽  
Author(s):  
Bahareh ameri ◽  
Akbar Mohammadi Zardkhoshoui ◽  
Saied Saeed Hosseiny Davarani

Metal-organic frameworks (MOFs) derived nanoarchitectures have special features, such as high surface area (SA), abundant active sites, exclusive porous networks, and remarkable supercapacitive performance when compared to traditional nanoarchitectures. Herein,...


2011 ◽  
Vol 295-297 ◽  
pp. 813-816 ◽  
Author(s):  
Li Liu

Silicon dioxide-based nanocomposites offer large loading capacity for various doping chemicals or molecular complexes, high surface to volume ratio and customizable surface chemistry for the creation and development of novel sensors and devices [1-2]. When compared with other sol-gel materials, xerogels represent a class of nanocomposites that are relatively easy to fabricate but with unique thermal, acoustic, optical and mechanical properties for rapid sensor or device prototyping development [3-4]. Xerogels in solids are formed by controlled evaporation of the liquid in the hydro-gel. Their porosity and morphology depend largely on the temperature, gel chemical compositions and pH in the fabrication process. When impregnated with fluorescent compounds in their nanosize cavities, the doped xerogels exhibit strong and stable fluorescence properties that are useful for the developing of ion-exchange sensors and optical devices. However, the use of these fluorescently doped xerogels in forensic applications was still largely unexplored.


2021 ◽  
Author(s):  
Y. Popat ◽  
M. Orlandi ◽  
S. Gupta ◽  
N. Bazzanella ◽  
S. Pillai ◽  
...  

Abstract Mixed transition-metals oxide electrocatalysts have shown huge potential for electrochemical water oxidation due to their earth abundance, low cost and excellent electrocatalytic activity. Here we present Co–Fe–B–O coatings as oxygen evolution catalyst synthesized by Pulsed Laser Deposition (PLD) which provided flexibility to investigate the effect of morphology and structural transformation on the catalytic activity. As an unusual behaviour, nanomorphology of 3D-urchin-like particles assembled with crystallized CoFe2O4 nanowires, acquiring high surface area, displayed inferior performance as compared to core–shell particles with partially crystalline shell containing boron. The best electrochemical activity towards water oxidation in alkaline medium with an overpotential of 315 mV at 10 mA/cm2 along with a Tafel slope of 31.5 mV/dec was recorded with core–shell particle morphology. Systematic comparison with control samples highlighted the role of all the elements, with Co being the active element, boron prevents the complete oxidation of Co to form Co3+ active species (CoOOH), while Fe assists in reducing Co3+ to Co2+ so that these species are regenerated in the successive cycles. Thorough observation of results also indicates that the activity of the active sites play a dominating role in determining the performance of the electrocatalyst over the number of adsorption sites. The synthesized Co–Fe–B–O coatings displayed good stability and recyclability thereby showcasing potential for industrial applications. Graphic Abstract


2017 ◽  
Author(s):  
Qiuju Yang ◽  
Ze-Jun Hu

Abstract. Aurora is a very important geophysical phenomenon in the high latitude of Arctic and Antarctic regions, and it is significant to make a comparative study of the auroral morphology between the two hemispheres. Based on the morphological characteristics of the four labeled dayside auroral types (include auroral arc, drapery corona, radial corona and hot-spot aurora) on the 8001 dayside auroral images at Chinese Yellow River Station in 2003, and by extracting the local binary pattern (LBP) features and using k-nearest classifier, this paper makes an automatic classification to the 65361 auroral images of the Chinese Yellow River Station during 2004–2009 and the 39335 auroral images of the South Pole Station between 2003–2005, and finally obtains the occurrence distribution of the dayside auroral morphology in northern and southern hemispheres. The statistical results indicate that the four auroral types present similar occurrence distribution between the two stations. To the best of our knowledge, we are the first to report the statistical comparative results of dayside auroral morphology distribution between northern and southern hemispheres.


2016 ◽  
Vol 6 (5) ◽  
pp. 1435-1441 ◽  
Author(s):  
Seyed Mohsen Sadeghzadeh

In this study, a novel fibrous nanosilica (KCC-1) based nanocatalyst (Au, Pd, and Cu) with a high surface area and easy accessibility of active sites was successfully developed by a facile approach.


PLoS ONE ◽  
2021 ◽  
Vol 16 (10) ◽  
pp. e0257777
Author(s):  
Anuja Tripathi ◽  
Kenneth D. Harris ◽  
Anastasia L. Elias

Nitrogen-functionalization is an effective means of improving the catalytic performances of nanozymes. In the present work, plasma-assisted nitrogen modification of nanocolumnar Ni GLAD films was performed using an ammonia plasma, resulting in an improvement in the peroxidase-like catalytic performance of the porous, nanostructured Ni films. The plasma-treated nanozymes were characterized by TEM, SEM, XRD, and XPS, revealing a nitrogen-rich surface composition. Increased surface wettability was observed after ammonia plasma treatment, and the resulting nitrogen-functionalized Ni GLAD films presented dramatically enhanced peroxidase-like catalytic activity. The optimal time for plasma treatment was determined to be 120 s; when used to catalyze the oxidation of the colorimetric substrate TMB in the presence of H2O2, Ni films subjected to 120 s of plasma treatment yielded a much higher maximum reaction velocity (3.7⊆10−8 M/s vs. 2.3⊆10−8 M/s) and lower Michaelis-Menten coefficient (0.17 mM vs. 0.23 mM) than pristine Ni films with the same morphology. Additionally, we demonstrate the application of the nanozyme in a gravity-driven, continuous catalytic reaction device. Such a controllable plasma treatment strategy may open a new door toward surface-functionalized nanozymes with improved catalytic performance and potential applications in flow-driven point-of-care devices.


Plant Disease ◽  
2021 ◽  
Author(s):  
Xiulan Xu ◽  
Si-yi Liu ◽  
Yicong Lv ◽  
Qian Zeng ◽  
Yinggao Liu ◽  
...  

Photinia × fraseri is a well-known green plant mainly distributed in the Yangtze River and Yellow River Basin, east and southwest of China (Guan et al. 2013). In October 2020, typical leaf blight symptoms on roughly 10% leaves in a Photinia × fraseri shrub were observed in the campus of Sichuan Agricultural University (30°42′19″ N, 103°51′29″ E). Initially, chlorotic lesions with brown margins occurred on the leaf margin, then the large patches formed to cause leaves necrotic, finally lesions to dry and acervulus bred in 2–4 months later. Five single conidium isolates were carried out (Chomnunti et al. 2014) cultured on potato dextrose agar (PDA) at 25 ℃. All isolates shared similarly morphological characteristics, which was white and thin, and the reverse were yellowish. Mycelium was hyaline, sparsely septate, measuring 1–4 μm in diam. Conidiogenesis formed after 7 days. Conidiogenous cells were discrete, lageniform, smooth, thin-walled, colorless. Conidia were fusiform, straight to slightly curved, 4-septate, 21–30 × 5–7 μm (x ̅= 27 × 6.0 μm, n=30); basal cells were obconic with truncate base, hyaline, thin- and smooth-walled, 4–7 μm long (x ̅= 5.5 μm, n=30); three median cells were doliiform with thick walls, concolorous, olivaceous, constricted at the septa, and septa and periclinal walls were darker than the rest of the cell, 14–20 μm long (x ̅= 17 μm, n=30); apical cells were hyaline, conic to cylindrical, 3.0–6.5 μm long (x ̅= 4.5 μm, n=30), with 2–4 (mostly 3) tubular apical appendages arising from the upper portion, rarely branched, 7.5–18 μm long (x ̅= 12 μm, n=50); basal appendage was single, unbranched, 3–10 μm long (x ̅= 6.5 μm, n=30). DNA was extracted from the representative strain (SICAUCC 21-0012), and the internal transcribed spacer (ITS) region, the large subunit of the nrDNA (LSU), translation elongation factor 1-alpha (tef1-α), and partial sequences of β-tubulin (tub2) were amplified by polymerase chain reaction and sequenced with primers ITS5/ITS4, LR0R/LR5, 728F/1567R, and Bt2a/Bt2b, respectively (Zhang et al. 2012, Ariyawansa & Hyde 2018). The sequences were deposited in GenBank, viz. MZ453106, MZ453108, MZ467300, MZ467301, respectively. The nucleotide blast showed 99% (ITS, 0 gaps), 100% (tub2, 0 gaps), 100% (tef1-α, 0 gaps) identities with the ex-type Pestalotiopsis trachicarpicola Yan M. Zhang & K. D. Hyde (IFRDCC 2440). The fungus was identified as P. trachicarpicola combined with phylogeny and morphology (Maharachchikumbura et al. 2012, Zhang et al. 2012). To conduct Koch’s postulates, five healthy 6-year-old P. × fraseri were inoculated with 10 µl spore suspension (106 conidia/ml) onto the wounded sites (five leaves per plant, ~1 to 2 years old) via sterile pin, and five healthy plants treated with sterile dH2O as controls (Yang et al. 2021). The plants were placed in a greenhouse at 25°C with relative humidity >80%. After 2 months, leaf blight symptoms gradually emerged on inoculated leaves, and the controls were symptomless. Fungal isolates from symptomatic plants showed similar morphological characteristics as SICAUCC 21-0012, and the pathogen was not isolated from asymptomatic plants. To our knowledge, this is the first report of leaf blight caused by P. trachicarpicola on Photinia × fraseri in China. Disease management should be adopted properly to restore and improve its ornamental value.


1983 ◽  
Vol 61 (7) ◽  
pp. 826-831 ◽  
Author(s):  
T. T. Ilenchuk ◽  
K. G. Davey

A comparison has been made of the effects of juvenile hormone (JH) on the binding characteristics for ouabain of microsomes prepared from brain and from cells of the follicular epithelium surrounding previtellogenic or vitellogenic oocytes in Rhodnius. JH has no effect on the binding of ouabain to brain microsomes and decreases the Kd, but does not alter the Bmax for previtellogenic follicle cells. For vitellogenic follicle cells, Scatchard analysis reveals a curvilinear relationship, which is interpreted as indicating that a new population of JH-sensitive ouabain-binding sites develops as the follicle cell enters vitellogenesis. These results are related to earlier data obtained on the effect of JH on ATPase activity, volume changes in isolated follicle cells, and the development of spaces between the cells of the follicular epithelium.


Planta Medica ◽  
2019 ◽  
Vol 85 (13) ◽  
pp. 1107-1113 ◽  
Author(s):  
Thomas Kopp ◽  
Mona Abdel-Tawab ◽  
Martin Khoeiklang ◽  
Boris Mizaikoff

AbstractPyrrolizidine alkaloids are secondary plant constituents that became a subject of public concern because of their hepatotoxic, pneumotoxic, genotoxic, and cytotoxic effects. Due to disregardful harvesting and/or contamination with pyrrolizidine alkaloid-containing plants, there is a high risk of ingesting these substances with plant extracts or natural products. The limit for the daily intake was set to 0.007 µg/kg body weight. If contained in an extract, cleanup methods may help to minimize the pyrrolizidine alkaloid concentration. For this purpose, a material for depleting pyrrolizidine alkaloids in herbal preparations was developed based on the approach of molecular imprinting using monocrotaline. Molecular imprinted polymers are substances with specific binding characteristics, depending on the template used for imprinting. By means of group imprinting, only one molecule is used for creating selective cavities for many molecular pyrrolizidine alkaloid variations. Design of Experiment was used for the development using a 25 screening plan resulting in 64 polymers (32 MIPs/32 NIPs). Rebinding trials revealed that the developed material can compete with common cation exchangers and is more suitable for depleting pyrrolizidine alkaloids than C18- material. Matrix trials using an extract from Chelidonium majus show that there is sufficient binding capacity for pyrrolizidine alkaloids (80%), but the material is lacking in selectivity towards pyrrolizidine alkaloids in the presence of other alkaloids with similar functional groups such as berberine, chelidonine, and coptisine. Beyond this interaction, the selectivity could be proven for other structurally different compounds on the example of chelidonic acid.


Sign in / Sign up

Export Citation Format

Share Document