scholarly journals Penggunaan Metode Heart Dan JSA Sebagai Upaya Pengurangan Human Error Pada Kecelakaan Kerja Di Departemen Produksi

2017 ◽  
Vol 17 (1) ◽  
pp. 1
Author(s):  
Faris Rohmawan ◽  
Dian Palupi Restuputri
Keyword(s):  
Occupational Health ◽  
Production Process ◽  
Human Error ◽  
Raw Materials ◽  
Health And Safety ◽  
Occupational Accidents ◽  
Occupational Accident ◽  
Operational Procedure ◽  
Additional Equipment ◽  
A Company

Occupational health and safety is very important point for a company. CV. XYZ is a company that produces paving and have problem about the occupational accident. There are 4 production procceses that can be couse occupational accidents, which is taking raw materials procces, stirring batter, forming and drying. This case must be analyzed using HEART and JSA method as evaluating effort for occupational accident. The results of HEART method analysing imply that HEP value 0,8632is the most dangerous occupational, that is forpicking gravel from cement mixer machine. After known the value of HEP afterward analyzed using JSA method. The goal is as improvement to occupational accident in the production process in order can be reduced. The result of JSA method analysing are improvement suggestion such us levying mask, hat, design of additional components for machine, additional equipment for pallet and hand pallet, and assigning standart operational procedure.

scholarly journals Analisis Kesehatan Dan Keselamatan Kerja Menggunakan Failure Mode And Effect Analysis Di PT. XYZ

2021 ◽  
Vol 23 (1) ◽  
pp. 46-58
Author(s):  
Muhammad Ramadan ◽  
Sukanta Sukanta ◽  
Risma Fitriani
Keyword(s):  
Occupational Health ◽  
Production Process ◽  
Health And Safety ◽  
Occupational Health And Safety ◽  
Risk Priority Number ◽  
Effect Analysis ◽  
Fmea Method ◽  
Prime Condition ◽  
A Company

Occupational Health and Safety (OHS) is important to maintain and improve so that the quality of human resources in the company is always in prime condition. Every company has a different level or level of Occupational Health and Safety (OHS). PT. XYZ is a company that uses corrosive materials, therefore Occupational Health and Safety (OHS) analyst at PT XYZ is needed. The Occupational Health and Safety (OHS) analysis carried out in this study used the FMEA method to determine which part of the production process had Occupational Health and Safety (OHS) that needed repair the most. From the research results, it was found that the highest Risk Priority Number (RPN) value was the pickling and degreasing production process.

scholarly journals KINERJA PROGRAM KESEHATAN DAN KESELAMATAN KERJA (K3) DI PERUSAHAAN PLYWOOD TAHUN 2012 - 2016

2018 ◽  
Vol 7 (1) ◽  
pp. 102
Author(s):  
Nikita Ayu Dwijayanti
Keyword(s):  
Health And Safety ◽  
Secondary Data ◽  
Occupational Accidents ◽  
Occupational Accident ◽  
T Score ◽  
Frequency Rate ◽  
Incident Rate ◽  
A Company ◽  
Rate Frequency ◽  
Accident Statistic

PT. Kutai Timber Indonesia (KTI) was a company that belongs to the timber sector. Occupational accident frequently happened on PT. KTI and those ccupational accidents must be reported and recorded to monitor occupational health and safety (OHS) performance program. The aim of this study was to measure OHS performance on PT. KTI in 2012 – 2016 with occupational accident statistic. This research was descriptive study that explained occupational accident statistic and OHS programs in PT. KTI. The statistic of occupational accident that include incident rate, frequency rate, severity rate and safe T-score. The data collection was through secondary data, observation sheets, and questionnaires. The results of this research were 303 occupational accidents that happened since 2012 until 2016. The highest incident based on Statistic calculation of occupational accident were incident rate and frequency rate in 2012, meanwhile the highest severity rate occurred in 2012, 2015 and 2016. Based on safe T-score calculation OHS Performance just increased in 2015.The result of this study was being affected by the OHS programs that had not changed since 2012 until 2016. 3 out of 11 programs had unfulfilled criterias under 50%, those were bus employees, planning and implementation of JSA and implementation of OHS.Keywords: OHS performance,OHS program, statistic of occupational accidents.   

scholarly journals The Preparation of a Matrix of Occupational Health and Safety Risks in a Wood Company

2019 ◽  
Vol 7 (11) ◽  
pp. 22-29
Author(s):  
Vilson Menegon Bristot ◽  
Didiane Ana Gonçalves ◽  
Nilzo Ivo Ladwig ◽  
Márcio Carlos Just ◽  
Bruno Brogni Uggioni ◽  
...  
Keyword(s):  
Occupational Health ◽  
Health And Safety ◽  
Occupational Health And Safety ◽  
Occupational Accidents ◽  
Risk Matrix ◽  
Physical Effort ◽  
Safety Risks ◽  
Wood Residues ◽  
The Matrix ◽  
A Company

Logging companies are extremely important in the economy of the country, but the large number of occupational accidents is of concern in this sector. It is therefore essential to act preventively in the cause of these accidents by identifying and controlling hazards. Thus, the objective of this work was to elaborate an Occupational Health and Safety Risk Matrix in a logging plant in Criciúma - SC. To this end, the applied matrix is based on the requirements set forth in BS OHSAS 18001: 2007. As a result it was observed that the greatest risk is incorrect posture and intense physical effort, as well as noise and projection of wood residues in the eyes and skin. It was inferred that with the matrix it was possible to identify the points in which a company should seek quick solutions to minimize the risks to which its employees are subjected daily.

PEMANFAATAN PERALATAN KESELAMATAN DAN KESEHATAN KERJA (K3) PADA PRAKTIKUM PROSES PRODUKSI

2020 ◽  
Vol 1 (2) ◽  
pp. 64-70
Author(s):  
Rezky Fajar Ramadhan
Keyword(s):  
Data Collection ◽  
Occupational Health ◽  
Engineering Education ◽  
Production Process ◽  
Mechanical Engineering ◽  
Health And Safety ◽  
Occupational Health And Safety ◽  
Education Students ◽  
Descriptive Data

Abstrak: Tujuan penelitian ini adalah untuk mendeskripsikan penggunaan peralatan Kesehatan dan Keselamatan Kerja (K3) pada Mata Kuliah Praktikum Proses Produksi mahasiswa Pendidikan Teknik Mesin, Universitas Palangka Raya. Jenis penelitian ini adalah deskriptif. Teknik pengumpulan data menggunakan teknik angket dan dokumentasi. Objek penelitian adalah seluruh mahasiswa Pendidikan Teknik Mesin, Universitas Palangka Raya yang memprogramkan Mata Kuliah Praktikum Proses Produksi. Hasil penelitian ini menunjukkan bahwa 43% mahasiswa menyatakan sangat baik dan 57% mahasiswa menyatakan baik penggunaan peralatan K3 pada Mata Kuliah Praktikum Proses Produksi. Sehingga, disimpulkan bahwa penerapan K3 dapat mendukung pelaksanaan praktikum proses produksi.   Abstract: The purpose of this study was to describe the use of Occupational Health and Safety (OHS) equipment in the Production Process Practicum Subject of Mechanical Engineering Education students, Palangka Raya University. This type of research was descriptive. Data collection techniques used questionnaires and documentation. The object of research was all students of Mechanical Engineering Education, Palangkaraya University who programed Production Process Practicum Subjects. The results of this study indicate that 43% of students stated very well and 57% of students stated good use of OHS equipment in the Production Process Practicum Course. Thus, it was concluded that the application of OHS can support the implementation of practicum in the production process.

D. Perhitungan HPP Telur Asin Dengan Pendekatan Variabel Costing Pada UD Mulya Jaya

2019 ◽  
Vol 4 (1) ◽  
pp. 30
Author(s):  
Neno Pratiwi ◽  
Andre Setiawan ◽  
Ilmi Cayono ◽  
Johan Trinanto
Keyword(s):  
Decision Making ◽  
Production Process ◽  
Raw Materials ◽  
Selling Price ◽  
Assistance Program ◽  
Total Cost ◽  
Cost Of Production ◽  
The Cost ◽  
A Company ◽  
Important Objective

ABSTRAK Pada umumnya harga pokok produksi dalam akuntansi diartikan dengan jumlah biaya dari seluruh pemakaian yang telah dilakukan selama proses produksi atau kegiatan yang mana mengubah bahan baku menjadi produk jadi (produk siap pakai/siap saji). Tujuan penting dalam tugas ini yaitu memperhitungkan harga pokok produksi dari UD Mulya Jaya dengan menggunakan pendekatan variabel costing untuk mengetahui besarnya harga pokok pada setiap produk yang diproduksi. Pentingnya penentuan harga pokok produksi dapat dilakukan sebelum para usaha menentukan harga jual. Pendampingan ini bertujuan untuk membantu mencari dan menentukan harga pokok produksi yang dapat digunakan untuk menetapkan harga jual. Pendampingan ini dilakukan untuk membantu wirausaha dalam program kerja, yaitu bimbingan akuntansi dengan fokus perhitungan harga pokok produksi. Dalam menentukan harga pokok produksi pada UD Mulya Jaya dapat menggunakan pendekatan variable costing yang biasanya metode ini digunakan untuk semacam pengambilan keputusan dalam perusahaan. Melalui program pendampingan kewirausahaan didapatkan hasil perhitungan harga pokok produksi yang menggunakan pendekatan variabel costing. Hasil tersebut dapat menjadi suatu keputusan bagi UD Mulya Jaya untuk dapat menetapkan harga pokok produksi pada setiap produk telur asin. Kata Kunci : Kewirausahaan, HPP, Harga.   ABSTRACT In general, the cost of production in accounting is defined as the total cost of all uses that have been made during the production process or activities which convert raw materials into finished products (ready-to-use / ready-to-serve products). An important objective in this task is to calculate the cost of goods manufactured from UD Mulya Jaya by using a variable costing approach to find out the cost of goods on each product produced. The importance of determining the cost of production can be done before businesses determine the selling price. This assistance aims to help find and determine the cost of production that can be used to set the selling price. This assistance is carried out to help entrepreneurs in work programs, namely accounting guidance with a focus on calculating the cost of production. In determining the cost of production at UD Mulya Jaya, it can use the variable costing approach, which is usually used for a kind of decision making in a company. Through the entrepreneurship assistance program, the results of the calculation of the cost of production are obtained using the variable costing approach. These results can be a decision for UD Mulya Jaya to be able to set the cost of production for each salted egg product. Keywords: Entrepreneurship, COGS, Price

scholarly journals THE IMPLEMENTATION OF OCCUPATIONAL HEALTH AND SAFETY FOR PREGNANT WORKERS IN VARIOUS WORKPLACES

2021 ◽  
Vol 2 (1) ◽  
pp. 33-41
Author(s):  
Aditira Dwi Hanani
Keyword(s):  
Women Workers ◽  
Occupational Health ◽  
Maternity Leave ◽  
Health And Safety ◽  
Occupational Health And Safety ◽  
Occupational Accidents ◽  
Work Related ◽  
Safety Programs ◽  
Special Protection ◽  
Health And Safety Programs

Pregnant workers have more health risks for health problems than other workers. There are different potential hazards in different workplaces. Occupational Health and Safety Programs need to be implemented for pregnant workers in order to avoid work related diseases in various workplaces. This study aims to determine the the implementation of occupational health and safety for pregnant workers in various workplaces. This study uses a qualitative method by conducting FGD (Focus Group Discussion) with pregnant women workers from various workplaces and in-depth interviews with occupational health and safety experts. Occupational health and safety programs have been implemented for pregnant workers such as the right to maternity leave, working hours arrangements, health insurance, and special protection for pregnant workers. However, there are some workplaces that still do not provide special protection for pregnant workers. Every workplace should pay more attention to the health and safety of pregnant workers as an effort to prevent occupational accidents and work related diseases

scholarly journals Impact of Alcohol on Occupational Health and Safety in the Construction Industry at Workplaces with Scaffoldings

2020 ◽  
Vol 10 (19) ◽  
pp. 6690
Author(s):  
Marek Sawicki ◽  
Mariusz Szóstak
Keyword(s):  
Factor Analysis ◽  
Alcohol Consumption ◽  
Alcohol Abuse ◽  
Occupational Health ◽  
Construction Industry ◽  
Health And Safety ◽  
Occupational Health And Safety ◽  
Occupational Accidents ◽  
Preventive Actions ◽  
Different Sources

The value, care, and customs of workers are essential in terms of occupational health and safety. The abuse of alcohol is widely regarded as a serious threat to the lives, health, and safety of employees. The aim of the research was to identify the main problems that are associated with alcohol abuse and consumption at work among employees in the construction industry, with particular emphasis on workstations where work is carried out on construction scaffoldings. Data for the analysis were obtained from two different sources. The first one was post-accident documentation on occupational accidents. The second one was surveys collected during the research project. This study confirmed that excessive and disproportionate alcohol consumption can be the cause of an accident, and consequently death at workplaces with scaffolding. Of 219 accident reports, 17.4% indicated alcohol as a contributing factor. Analysis of accident documentations shows that in cases where alcohol was indicated as a contributing factor in an accident, the alcohol was consumed during the workday. The results obtained on the basis of the conducted research were able to constitute a justification for the directions of preventive actions carried out in order to reduce the number of occupational accidents in the construction industry caused by alcohol.

DEMOGRAPHIC ANALYSIS OF OCCUPATIONAL ACCIDENT OCCURRENCE IN MANUFACTURING INDUSTRY

2015 ◽  
Vol 77 (1) ◽  
Author(s):  
Jafri Mohd Rohani ◽  
Mohamed Fitri Johari ◽  
Wan Harun Wan Hamid ◽  
Hood Atan
Keyword(s):  
Manufacturing Industry ◽  
Preventive Measures ◽  
Health And Safety ◽  
Working Environment ◽  
Occupational Accidents ◽  
Occupational Accident ◽  
Accident Rate ◽  
Data Collection Process ◽  
Safety Officer ◽  
Safe Working

The objective of this paper is to analyze the demography aspect of occupational accident occurrence in Malaysia for manufacturing industry. High accident rate would give an adverse effect not only to the victims and their family but also to the organization as well. This study analyses various type of occupational accidents which limited to temporary disability with more than one day sick leave and cases recorded range between 2008 and 2013. The data is gathered from six different sectors within manufacturing industry by using local specific approach.  Information related to each accident is obtained by checking past occupational accident record and interviewing site safety officer in charge, human resource representative, site supervisor and fellow workers. There are 342 cases in total have been gathered during data collection process before data analysis phase took place. This study provides a better perspective regarding to occupational accident occurrence to interested stakeholder such as enforcement body, occupational health and safety practitioner and company management itself. The findings from this study can be used to draft necessary preventive measures in order to provide safe working environment which can give significant impact through reduction of occupational accidents in the future.

scholarly journals Occupational health and safety in agriculture. A systematic review

2020 ◽  
Vol 68 (4) ◽  
Author(s):  
Licet Paola Molina-Guzmán ◽  
Leonardo Alberto Ríos-Osorio
Keyword(s):  
United States ◽  
Occupational Health ◽  
Agricultural Sector ◽  
Grey Literature ◽  
Health And Safety ◽  
Final Analysis ◽  
The United States ◽  
Occupational Accidents ◽  
Original Research ◽  
Search Terms

Introduction: The prevalence of occupational diseases in the agricultural sector is higher than in other industries, since agricultural workers are at higher risk of exposure to different chemicals and pesticides, and are more prone to occupational accidents.Objective: To conduct a review of recent literature on occupational health and risk in agriculture.Materials and methods: A literature search was conducted in PubMed, SciencieDirect and Scopus using the following search strategy: type of articles: original research papers; language: English; publication period: 2006-2016; search terms: "agricultural health", "agrarian health", "risk factors", "epidemiology", "causality" and "occupational", used in different combinations ("AND" and "OR").Results: The search yielded 350 articles, of which 102 met the inclusion criteria. Moreover, 5 articles were found in grey literature sources and included in the final analysis. Most research on this topic has been conducted in the United States, which produced 91% (97/107) of the articles included.Conclusions: Most studies on health and safety in agriculture focused primarily on the harmful effects of occupational exposure to agrochemicals and pesticides, and the consequences of occupational accidents. However, since more than 90% of these studies come from the United States, a more comprehensive approach to health in agriculture is required, since what is reported here may be far from the reality of other regions, especially Latin America.

scholarly journals Occupational health and safety characteristics of agricultural workers in Adana, Turkey: a cross-sectional study

PeerJ ◽  
2018 ◽  
Vol 6 ◽  
pp. e4952 ◽  
Author(s):  
Ramazan Azim Okyay ◽  
Ferdi Tanır ◽  
Pelin Mutlu Ağaoğlu
Keyword(s):  
Occupational Health ◽  
Social Security ◽  
Health And Safety ◽  
Occupational Health And Safety ◽  
Cross Sectional Study ◽  
Agricultural Workers ◽  
Occupational Accidents ◽  
Sectional Study ◽  
Cross Sectional ◽  
The Mean

Background Among agricultural workers, especially in the seasonal migratory ones, housing and hygiene related issues, occupational accidents, low levels of education, poverty and absence of social security problems emerge as significant public health problems. This study aims to compare migrant-seasonal workers (MSWs) and resident agricultural workers (RAWs) in terms of socio-demographic characteristics and occupational health and safety in Adana, one of Turkey’s most important agricultural cities. Methods This cross-sectional study was conducted on RAWs and MSWs, aged 15–65, operating in the province of Adana. The calculated sample sizes for both MSWs and RAWs were distributed using stratified simple random sampling to five districts of Adana. Results The mean age of the 798 participating agricultural workers was 34.6 ± 14.2. Of the RAWs, 78.8% and of the MSWs 57.0% were male; 5.8% of RAWs and 32.8% of MSWs were illiterate. The mean number of people in the households of the participating workers was 5.1 for RAWs and 6.6 for MSWs. Of the RAWs, 20.5% were not covered by any social security scheme while this percentage was 35.1% in MSWs. RAWs worked 9.9 h a day while MSWs worked 10.9 h a day. Of the agricultural workers, 12.9% had injuries caused by occupational accidents. Discussion Agricultural workers, who are a large part of Turkey’s economically active population, do not have healthy and safe working conditions. New regulations in the fields of social security, record keeping, monitoring, supervision, education and occupational health have been implemented recently to solve these problems. Despite the recent improvements there are still some problematic issues in the auditing of the necessary practices.

Sign in / Sign up

Export Citation Format

Share Document