Structure-Aware Halftoning Using the Iterative Method Controlling the Dot Placement

2021 ◽  
Author(s):  
Fereshteh Abedini ◽  
Sasan Gooran ◽  
Vlado Kitanovski ◽  
Daniel Nyström
Keyword(s):  
Geometrical Structure ◽  
Three Dimensional ◽  
Structural Similarity ◽  
Image Reproduction ◽  
Halftone Image ◽  
Printing Inks ◽  
Continuous Tone ◽  
Adaptive Nature ◽  
Quality Assessments ◽  
Different Parts

Many image reproduction devices, such as printers, are limited to only a few numbers of printing inks. Halftoning, which is the process to convert a continuous-tone image into a binary one, is, therefore, an essential part of printing. An iterative halftoning method, called Iterative Halftoning Method Controlling the Dot Placement (IMCDP), which has already been studied by research scholars, generally results in halftones of good quality. In this paper, we propose a structure-based alternative to this algorithm that improves the halftone image quality in terms of sharpness, structural similarity, and tone preservation. By employing appropriate symmetrical and non-symmetrical Gaussian filters inside the proposed halftoning method, it is possible to adaptively change the degree of sharpening in different parts of the continuous-tone image. This is done by identifying a dominant line in the neighborhood of each pixel in the original image, utilizing the Hough Transform, and aligning the dots along the dominant line. The objective and subjective quality assessments verify that the proposed structure-based method not only results in sharper halftones, giving more three-dimensional impression, but also improves the structural similarity and tone preservation. The adaptive nature of the proposed halftoning method makes it an appropriate algorithm to be further developed to a 3D halftoning method, which could be adapted to different parts of a 3D object by exploiting both the structure of the images being mapped and the 3D geometrical structure of the underlying printed surface.

scholarly journals Direct 3D model extraction method for color volume images

2021 ◽  
Vol 29 ◽  
pp. 133-140
Author(s):  
Bin Liu ◽  
Shujun Liu ◽  
Guanning Shang ◽  
Yanjie Chen ◽  
Qifeng Wang ◽  
...  
Keyword(s):  
3D Model ◽  
Clinical Medicine ◽  
Three Dimensional ◽  
Laplacian Matrix ◽  
Segmentation Method ◽  
Human Organs ◽  
Model Segmentation ◽  
Treatment Objective ◽  
Organ Models ◽  
Different Parts

BACKGROUND: There is a great demand for the extraction of organ models from three-dimensional (3D) medical images in clinical medicine diagnosis and treatment. OBJECTIVE: We aimed to aid doctors in seeing the real shape of human organs more clearly and vividly. METHODS: The method uses the minimum eigenvectors of Laplacian matrix to automatically calculate a group of basic matting components that can properly define the volume image. These matting components can then be used to build foreground images with the help of a few user marks. RESULTS: We propose a direct 3D model segmentation method for volume images. This is a process of extracting foreground objects from volume images and estimating the opacity of the voxels covered by the objects. CONCLUSIONS: The results of segmentation experiments on different parts of human body prove the applicability of this method.

scholarly journals Polymer cyclization for the emergence of hierarchical nanostructures

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Chaojian Chen ◽  
Manjesh Kumar Singh ◽  
Katrin Wunderlich ◽  
Sean Harvey ◽  
Colette J. Whitfield ◽  
...  
Keyword(s):  
Self Assembly ◽  
Three Dimensional ◽  
Hierarchical Structures ◽  
Structural Similarity ◽  
Vital Role ◽  
Nanomaterial Synthesis ◽  
Wide Range ◽  
Linear Poly ◽  
Polymer Folding ◽  
Dynamics Simulations

AbstractThe creation of synthetic polymer nanoobjects with well-defined hierarchical structures is important for a wide range of applications such as nanomaterial synthesis, catalysis, and therapeutics. Inspired by the programmability and precise three-dimensional architectures of biomolecules, here we demonstrate the strategy of fabricating controlled hierarchical structures through self-assembly of folded synthetic polymers. Linear poly(2-hydroxyethyl methacrylate) of different lengths are folded into cyclic polymers and their self-assembly into hierarchical structures is elucidated by various experimental techniques and molecular dynamics simulations. Based on their structural similarity, macrocyclic brush polymers with amphiphilic block side chains are synthesized, which can self-assemble into wormlike and higher-ordered structures. Our work points out the vital role of polymer folding in macromolecular self-assembly and establishes a versatile approach for constructing biomimetic hierarchical assemblies.

scholarly journals Transient Thermal Analysis of NH000 gG 100A Fuse Link Employing Finite Element Method

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1421
Author(s):  
Michał Szulborski ◽  
Sebastian Łapczyński ◽  
Łukasz Kolimas ◽  
Łukasz Kozarek ◽  
Desire Dauphin Rasolomampionona ◽  
...  
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Ceramic Body ◽  
Three Dimensional ◽  
Operating Mode ◽  
Power Losses ◽  
Empirical Tests ◽  
Transient Thermal ◽  
Different Parts ◽  
Element Method

In this paper, a detailed three-dimensional, transient, finite element method of fuse link NH000 gG 100 A is proposed. The thermal properties during the operation of the fuses under nominal (100 A) and custom conditions (110 and 120 A) are the main focus of the analyses that were conducted. The work concerns both the outside elements of the fuse link (ceramic body) and the elements inside (current circuit). Both the distribution of the electric current and its impact on the temperature of the construction parts of the fuses during their operating mode have been described. Temperature distribution, power losses and energy dissipation were measured using a numerical model. In order to verify and validate the model, two independent teams of scientists executed experimental research, during which the temperature was measured on different parts of the device involving the rated current. Finally, the two sets of results were put together and compared with those obtained from the simulation tests. A possible significant correlation between the results of the empirical tests and the simulation work was highlighted.

3D simulations of warm and hot Jupiter atmospheres: the role of 3D mixing in shaping CH4-to-CO conversion pathways

2021 ◽  
Author(s):  
Maria Zamyatina ◽  
Eric Hebrard ◽  
Nathan Mayne ◽  
Benjamin Drummond
Keyword(s):  
Chemical Structure ◽  
Three Dimensional ◽  
Chemical Species ◽  
Radiation Chemistry ◽  
3D Simulations ◽  
Horizontal Advection ◽  
Co Conversion ◽  
Area Of Influence ◽  
Different Parts

<p>We present results from a set of cloud-free simulations of exoplanet atmospheres using a coupled three-dimensional (3D) hydrodynamics-radiation-chemistry model. We report in particular our investigation of the thermodynamic and chemical structure of the atmospheres of HAT-P-11b and WASP-17b and their comparison with the results for the atmospheres of HD 189733b and HD 209458b presented in Drummond et al. (2020). We found that the abundances of chemical species from simulations with interactive chemistry depart from their respective abundances computed at local chemical equilibrium, especially at higher latitudes. To understand this departure, we analysed the CH<sub>4</sub>-to-CO conversion pathways within the Venot et al. (2019) reduced chemical network used in our model using a chemical network analysis. We found that at steady state nine CH<sub>4</sub>-to-CO conversion pathways manifest in our 3D simulations with interactive chemistry, with different pathways dominating different parts of the atmosphere and their area of influence being determined by the vertical and horizontal advection and shifting between planets.</p>

A Video Super Resolution Algorithm Based on Wavelet Coefficient

2014 ◽  
Vol 610 ◽  
pp. 425-428
Author(s):  
Wei Jian Liu ◽  
Si Da Xiao ◽  
Ruo He Yao
Keyword(s):  
High Frequency ◽  
Wavelet Coefficient ◽  
Three Dimensional ◽  
Super Resolution ◽  
Structural Similarity ◽  
Image Sequences ◽  
Discrete Wavelet ◽  
Resolution Image ◽  
Resolution Algorithm ◽  
Visual Results

In this paper, we propose a new super-resolution algorithm based on wavelet coefficient. The proposed algorithm uses discrete wavelet transform (DWT) to decompose the input low-resolution image sequences into four subband images, including LL, LH, HL, HH. Then the input images have been processed by the 3DSKR (Three Dimensional Steering Kernel Regression) super resolution (SR) algorithm, and the result replaces the LL subband image, while the three high-frequency subband images have been interpolated. Finally, combining all these images to generate a new high-resolution image by using inverse DWT. Proposed method has been verified on Calendar and Foliage by Matlab software platform. The peak signal-to-noise (PSNR), structural similarity (SSIM) and visual results are compared, and show that the computational complexity of the proposed algorithm decline by 30 percent compared with the existing algorithm to obtain the approximate results.

scholarly journals Bio-inks for 3D bioprinting: recent advances and future prospects

2017 ◽  
Vol 8 (31) ◽  
pp. 4451-4471 ◽  
Author(s):  
Ilze Donderwinkel ◽  
Jan C. M. van Hest ◽  
Neil R. Cameron
Keyword(s):  
Extracellular Matrix ◽  
Three Dimensional ◽  
Extracellular Matrix Proteins ◽  
Matrix Proteins ◽  
Cell Aggregates ◽  
3D Bioprinting ◽  
Future Prospects ◽  
Printing Inks ◽  
Polymer Bead ◽  
Polymeric Hydrogels

In the last decade, interest in the field of three-dimensional (3D) bioprinting has increased enormously. This review describes all the currently used bio-printing inks, including polymeric hydrogels, polymer bead microcarriers, cell aggregates and extracellular matrix proteins.

scholarly journals Experimental Investigation of Color Reproduction Quality of Color 3D Printing Based on Colored Layer Features

Molecules ◽  
2020 ◽  
Vol 25 (12) ◽  
pp. 2909 ◽  
Author(s):  
Jiangping Yuan ◽  
Jieni Tian ◽  
Chen Chen ◽  
Guangxue Chen
Keyword(s):  
3D Printing ◽  
Numerical Models ◽  
Three Dimensional ◽  
Chromatic Aberration ◽  
Structural Similarity ◽  
Color Reproduction ◽  
Color Test ◽  
Layer Sequence ◽  
Colored Layer

Color three-dimensional (3D) printing is an advanced 3D printing technique for reproducing colorful 3D objects, but it still has color accuracy issues. Plastic-based color 3D printing is a common color 3D printing process, and most factors affecting its color reproduction quality have been studied from printing materials to parameters in the fixed consecutive layers. In this work, and combined with variable stair thickness, the colored layer sequence in sliced layers of a specific 3D color test chart is deliberately changed to test the effects of colored layer features on its final color reproduction quality. Meanwhile, the colorimetric measurement and image acquisition of printed 3D color test charts are both achieved under standard conditions. Results clearly show that the chromatic aberration values and mean structural similarity (MSSIM) values of color samples have a significant correlation with the colored stair thickness, but both did not display a linear relationship. The correlation trends between colored layer sequence and the above two indexes are more localized to the colored stair thickness. Combined with color structural similarity (SSIM) maps analysis, a comprehensive discussion between colored layer features and color reproduction quality of color 3D printing is presented, providing key insights for developing further accurate numerical models.

scholarly journals Novel C7-Substituted Coumarins as Selective Monoamine Oxidase Inhibitors: Discovery, Synthesis and Theoretical Simulation

Molecules ◽  
2019 ◽  
Vol 24 (21) ◽  
pp. 4003 ◽  
Author(s):  
Dong Wang ◽  
Ren-Yuan Hong ◽  
Mengyao Guo ◽  
Yi Liu ◽  
Nianhang Chen ◽  
...  
Keyword(s):  
Monoamine Oxidase ◽  
Neurological Diseases ◽  
Three Dimensional ◽  
Structural Similarity ◽  
Dynamic Simulations ◽  
High Sequence Identity ◽  
Theoretical Simulation ◽  
Subtype Selectivity ◽  
Ic50 Values ◽  
Substituted Coumarins

There is a continued need to develop new selective human monoamine oxidase (hMAO) inhibitors that could be beneficial for the treatment of neurological diseases. However, hMAOs are closely related with high sequence identity and structural similarity, which hinders the development of selective MAO inhibitors. “Three-Dimensional Biologically Relevant Spectrum (BRS-3D)” method developed by our group has demonstrated its effectiveness in subtype selectivity studies of receptor and enzyme ligands. Here, we report a series of novel C7-substituted coumarins, either synthesized or commercially purchased, which were identified as selective hMAO inhibitors. Most of the compounds demonstrated strong activities with IC50 values (half-inhibitory concentration) ranging from sub-micromolar to nanomolar. Compounds, FR1 and SP1, were identified as the most selective hMAO-A inhibitors, with IC50 values of 1.5 nM (selectivity index (SI) < −2.82) and 19 nM (SI < −2.42), respectively. FR4 and FR5 showed the most potent hMAO-B inhibitory activity, with IC50 of 18 nM and 15 nM (SI > 2.74 and SI > 2.82). Docking calculations and molecular dynamic simulations were performed to elucidate the selectivity preference and SAR profiles.

scholarly journals Hydrodynamic Model Of Glaciers and Ice Sheets Interacted With Ocean

1990 ◽  
Vol 14 ◽  
pp. 347-347
Author(s):  
V.L. Mazo
Keyword(s):  
Shear Stress ◽  
Hydrodynamic Model ◽  
Evolution Equations ◽  
Three Dimensional ◽  
Ice Sheets ◽  
Ice Sheet ◽  
Longitudinal Stress ◽  
First Order ◽  
Longwave Approximation ◽  
Different Parts

Tidewater glaciers and large ice sheets, e.g. the Antarctic ice sheet and a late-Würm Arctic ice sheet, are complex but single dynamic systems composed of terrestrial, marine and floating parts. Morphology and dynamics of the different parts are different. The terrestrial parts are convex and their dynamics are controlled by shear stress only (the longitudinal stress is zero); the floating parts are concave and their dynamics are controlled by longitudinal stress only (the shear stress is zero). To connect the different parts we should consider transitional zones where shear and longitudinal stresses are comparable.To describe glacier and ice-sheet dynamics, longwave approximation of the first order is used. In this approximation it is impossible to connect terrestrial and floating parts dynamically, only morphologically and kinematically. It means that the first-order longwave approximation is not sufficient.If the transitional zone between the terrestrial and floating parts is long in comparison to ice thickness (in hydrodynamics the term “weak” is used) we can do the next step in the longwave approximation to describe the single dynamical system consisting of the terrestrial and floating parts and the weak transitional zones (ice streams). It is a purely hydrodynamical approach to the problem without ad hoc hypothesis.The presented model is a non-stationary three-dimensional hydrodynamic model of glaciers and ice sheets interacted with ocean, involving the conditions of ice continuity and dynamic equilibrium, ice rheology, and boundary conditions on the free surface (dynamic and kinematic) and on the bed (ice freezing or sliding). Longwave approximation is used to reduce the three-dimensional model to a two-dimensional one. The latter consists of (1) evolution equations for grounded and floating parts and weak transitional zones; (2) boundary conditions on the fronts (e.g. the conditions of calving); (3) equations governing the junctions of the parts (the most important junction is the grounded line) with the conditions connecting the evolution equations.

Sign in / Sign up

Export Citation Format

Share Document