scholarly journals An experimental study of the dynamic properties of smart composite magnetorheological materials

2021 ◽  
Vol 2 (1) ◽  
pp. 27-33
Author(s):  
Salah Aguib ◽  
Salah Roubah ◽  
Mohamed Hadji ◽  
Lallia Kobzili ◽  
Chikh Noureddine ◽  
...  
Keyword(s):  
Experimental Study ◽  
Smart Materials ◽  
Magnetic Field Intensity ◽  
Dynamic Properties ◽  
Mechanical Vibration ◽  
Smart Composite ◽  
Magnetorheological Elastomers ◽  
Low Stiffness ◽  
The Difference ◽  
New Generation

A magnetorheological is a new generation of smart materials in active mechanical vibration and shock control applications. This article is based on a comparative experimental study of the dynamic properties of magnetorheological elastomers (MRE) and magnetorheological fluids (MRF), whose damping and stiffness are controlled simultaneously by applying magnetic field intensity. The dynamic visco-analyser and rheometer were used to test the behaviour of MRE and MRF. The response of both materials depends on the amplitude due to shear strain. The experimental results clearly show the difference between the dynamic properties of MRE and MRF. More specifically, MFRs have high damping with low stiffness; on the other hand, the MRE has average damping with outstanding rigidity. These results help designers achieve more efficient and reliable structures in various engineering fields, such as buildings and mechanical applications.

Experimental Study on Piezoresistivity and Magnetoresistivity of Magnetorheological Elastomers

2010 ◽  
Vol 37-38 ◽  
pp. 444-447 ◽  
Author(s):  
Wei Qiang Ye ◽  
Yi Min Deng ◽  
Wei Wang
Keyword(s):  
Smart Materials ◽  
Magnetic Field Intensity ◽  
Nickel Content ◽  
Applied Pressure ◽  
Hysteresis Phenomenon ◽  
Magnetorheological Elastomer ◽  
Research Focus ◽  
Magnetorheological Elastomers ◽  
New Type ◽  
Low Magnetic Field

As a new type of smart materials, magnetorheological elastomer (MRE) has become a hot current research focus. However, the piezoresistivity and magnetoresistivity of MRE have not been well studied. In this paper, this was done by using a test rig developed by the authors. The experimental results showed that the conductivity of the MRE responded sensitively to the applied pressure, and a linear relationship between the resistivity of the MRE and the applied pressure can be observed within a certain range. Besides, the sensitivity of piezoresistivity is different among different ratios of metal content, and it becomes more obvious when using the nickel content. And, the magnetoresistivity of MRE is not obvious in a range of low magnetic field intensity, and there is also no hysteresis phenomenon about magnetoresistivity.

Experimental Study of Dynamic Properties for Serially Isolated System

2011 ◽  
Vol 250-253 ◽  
pp. 2814-2817
Author(s):  
Dong Bing Zhang ◽  
Xiang Lin Jiang ◽  
Yan Hui Liu
Keyword(s):  
Experimental Study ◽  
Dynamic Properties ◽  
Tensile Force ◽  
Shaking Table ◽  
Scale Model ◽  
Small Scale ◽  
Natural Period ◽  
The Difference ◽  
Isolation Device ◽  
Small Scale Model

This paper presents a new-style isolation device for serially isolated system by the dynamic analysis to serially isolated system. This device has small horizontal stiffness and the difference of this device with rubber-lead bearing is that this device can resist biggish vertical tensile force. Then the experiment for small-scale model of this device based on sweep sine shaking table is processed. The results show serially isolated system with this device can prolong natural period of serial system and effectively decrease the response of superstructure and have good isolated performance and stability.

A simulation apparatus for the experimental study of batch reactor control methods

1986 ◽  
Vol 51 (6) ◽  
pp. 1259-1267
Author(s):  
Josef Horák ◽  
Petr Beránek
Keyword(s):  
Experimental Study ◽  
Closed Loop ◽  
Dynamic Properties ◽  
Batch Reactor ◽  
Exothermic Reaction ◽  
Electric Heating ◽  
Batch Reactors ◽  
Exchange Area ◽  
The Stability ◽  
Methods Of Control

A simulation apparatus for the experimental study of the methods of control of batch reactors is devised. In this apparatus, the production of heat by an exothermic reaction is replaced by electric heating controlled by a computer in a closed loop; the reactor is cooled with an external cooler whose dynamic properties can be varied while keeping the heat exchange area constant. The effect of the cooler geometry on its dynamic properties is investigated and the effect of the cooler inertia on the stability and safety of the on-off temperature control in the unstable pseudostationary state is examined.

scholarly journals Mode Shape-Based Damage Detection Method (MSDI): Experimental Validation

2021 ◽  
Vol 11 (10) ◽  
pp. 4589
Author(s):  
Ivan Duvnjak ◽  
Domagoj Damjanović ◽  
Marko Bartolac ◽  
Ana Skender
Keyword(s):  
Boundary Conditions ◽  
Damage Detection ◽  
Mode Shape ◽  
Experimental Validation ◽  
Detection Method ◽  
Dynamic Properties ◽  
Damage Index ◽  
Main Principle ◽  
The Difference ◽  
Different Levels

The main principle of vibration-based damage detection in structures is to interpret the changes in dynamic properties of the structure as indicators of damage. In this study, the mode shape damage index (MSDI) method was used to identify discrete damages in plate-like structures. This damage index is based on the difference between modified modal displacements in the undamaged and damaged state of the structure. In order to assess the advantages and limitations of the proposed algorithm, we performed experimental modal analysis on a reinforced concrete (RC) plate under 10 different damage cases. The MSDI values were calculated through considering single and/or multiple damage locations, different levels of damage, and boundary conditions. The experimental results confirmed that the MSDI method can be used to detect the existence of damage, identify single and/or multiple damage locations, and estimate damage severity in the case of single discrete damage.

scholarly journals Nondestructive Detection of the Gel State of Preserved Eggs Based on Dielectric Impedance

Foods ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 394
Author(s):  
Cheng-Han Li ◽  
Chun-Hung Hsieh ◽  
Cheng-Chu Hung ◽  
Ching-Wei Cheng
Keyword(s):  
Decay Rate ◽  
Mechanical Vibration ◽  
Scientific Basis ◽  
Nondestructive Method ◽  
Inspection System ◽  
Nyquist Diagram ◽  
Detection Technology ◽  
The Difference ◽  
The Individual

After completing the production of preserved eggs, traditionally, the degree of gelling is judged by allowing workers to tap the preserved eggs with their fingers and sense the resulting oscillations. The amount of oscillation is used for the quality classification. This traditional method produces varying results owing to the differences in the sensitivity of the individual workers, who are not objective. In this study, dielectric detection technology was used to classify the preserved eggs nondestructively. The impedance in the frequency range of 2–300 kHz was resolved into resistance and reactance, and was plotted on a Nyquist diagram. Next, the diagram curve was fitted in order to obtain the equivalent circuit, and the difference in the compositions of the equivalent circuits corresponding to gelled and non-gelled preserved eggs was analyzed. A preserved egg can be considered an RLC series circuit, and its decay rate is consistent with the decay rate given by mechanical vibration theory. The Nyquist diagrams for the resistance and reactance of preserved eggs clearly showed that the resistance and reactance of gelled and non-gelled eggs were quite different, and the classification of the eggs was performed using Bayesian network (BN). The results showed that a BN classifier with two variables, i.e., resistance and reactance, can be used to classify preserved eggs as gelled or non-gelled, with an accuracy of 81.0% and a kappa value of 0.62. Thus, a BN classifier based on resistance and reactance demonstrates the ability to classify the quality of preserved egg gel. This research provides a nondestructive method for the inspection of the quality of preserved egg gel, and provides a theoretical basis for the development of an automated preserved egg inspection system that can be used as the scientific basis for the determination of the quality of preserved eggs.

scholarly journals DESIGN CONCEPT OF TEST STAND FOR DETERMINING PROPERTIES OF MAGNETORHEOLOGICAL ELASTOMERS

2013 ◽  
Vol 7 (3) ◽  
pp. 131-134 ◽  
Author(s):  
Mirosław Bocian ◽  
Jerzy Kaleta ◽  
Daniel Lewandowski ◽  
Michał Przybylski
Keyword(s):  
Magnetic Field ◽  
Mechanical Properties ◽  
Smart Materials ◽  
Vibration Damping ◽  
Test Stand ◽  
Design Concept ◽  
Special Test ◽  
Magnetorheological Elastomers ◽  
Vibration Dampers

Abstract Magnetorheological elastomers (MRE) are “SMART” materials that change their mechanical properties under influence of magnetic field. Thanks to that ability it is possible to create adaptive vibration dampers based on the MRE. To test vibration damping abilities of this material special test stand is required. This article presents design concept for such test stand with several options of testing.

SIMULATION OF NONLINEAR MAGNETORHEOLOGICAL PARTICLE-FILLED ELASTOMERS

2013 ◽  
Vol 02 (03n04) ◽  
pp. 1350018
Author(s):  
SHULEI SUN ◽  
XIONGQI PENG ◽  
ZAOYANG GUO
Keyword(s):  
Magnetic Field ◽  
Shear Modulus ◽  
Young’S Modulus ◽  
Applied Magnetic Field ◽  
Smart Materials ◽  
Young's Modulus ◽  
Particle Volume ◽  
Magnetorheological Elastomers ◽  
Maxwell Stress Tensor ◽  
Element Simulation

Polymer matrix filled with ferromagnetic particles is a class of smart materials whose mechanical properties can be changed under different magnetic field. They are usually referred to as magnetorheological elastomers (MREs). A finite element simulation was presented to describe the mechanical behavior of MREs with the nonlinearity of the particle magnetization being incorporated. By introducing the Maxwell stress tensor, a representative volume element (RVE) was proposed to calculate the Young's modulus and shear modulus of MREs due to the applied magnetic field. The influences of the applied magnetic field and the particle volume fractions in the shear modulus and Young's modulus were studied. Results show that the shear modulus increases with the magnitude of the applied magnetic field, while the Young's modulus decreases.

Experimental Study of Bending Toughness on Hybrid Fiber Reinforced Concrete

2013 ◽  
Vol 327 ◽  
pp. 201-204
Author(s):  
Jin Song Shi ◽  
Bo Yuan ◽  
Da Zhang Wang ◽  
Zhe An Lu
Keyword(s):  
Experimental Study ◽  
Reinforced Concrete ◽  
Fiber Reinforced Concrete ◽  
Bending Test ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Toughness Index ◽  
The Difference ◽  
Loading Methods ◽  
Index Value

In order to investigate the difference of current toughness index standards for fiber reinforced concrete, two main groups of specimens were made to take bending toughness test with the requirements of corresponded standards, loading methods and loading speeds, which are ASTM C1018 in America, ACI 544 and JSCE G552 in Japan. United with software Origin, the load-deflection curves gathered from bending test was calculated with relative standards. The results show that the calculated toughness index value with ASTM C1018-98 in America is more accurate with three grades but the requested deflection of testing is much longer than others while ACI 544 and JSCE G552 in Japan are quite the contrary.

scholarly journals Effects of Environmental Temperature onCapnodis tenebrionisAdult Phenology

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Carmelo Peter Bonsignore
Keyword(s):  
Late Summer ◽  
Early Summer ◽  
Adult Density ◽  
Degree Days ◽  
Continuous Increase ◽  
Climate Conditions ◽  
Average Annual Temperature ◽  
Activity Temperature ◽  
The Difference ◽  
New Generation

The phenology ofCapnodis tenebrionisadults was presented with reference to two different climate conditions. In a temperate moderate-warm climate, adult density showed two separate peaks during the year: one in early summer of the overwintering generation and one with beetles emerging in the late summer. In a warmer semiarid climate, the overwintering adults and the new generation overlapped during summer with a continuous increase of adult density. The difference in the average annual temperature between areas during the study period was almost3∘C, and, in the warmer area, the new generation ofC. tenebrionisemerged at least one month earlier. To make a prediction of adult presence, a model utilizing degree-days was developed from data collected over a five-year period. Models obtained from equations (Logistic 4-parameter,y(x)=yo+a/(1+(x/xo)b)) of each year were developed to describe the relationship between degree-day accumulation (with a minimal threshold activity temperature of14.21∘Ccalculated in the laboratory) and the cumulative percentage of adult presence. According to the overall model, the 50% of overwintering beetles occurred at 726 degree-days (Biofix: 1st March) and the emerging beetles occurred at 801 degree-days (Biofix: 1st July). The results show that a change in temperature is an important aspect that highlights the adaptability of this species.

Experimental Validation and Numerical Simulation of Shape Memory Flat Wire Actuators

2014 ◽  
Author(s):  
Alexander Czechowicz ◽  
Sven Langbein
Keyword(s):  
Shape Memory Alloy ◽  
Boundary Conditions ◽  
Shape Memory ◽  
Smart Materials ◽  
Empirical Data ◽  
Dynamic Properties ◽  
Fatigue Behavior ◽  
Different Boundary Conditions ◽  
Heating And Cooling ◽  
Actual Shape

Shape memory alloys (SMA) are thermally activated smart materials. Due to their ability to change into a previously imprinted actual shape through the means of thermal activation, they are suitable as actuators for mechatronical systems. Despite of the advantages shape memory alloy actuators provide, these elements are only seldom integrated by engineers into mechatronical systems. Reasons are the complex characteristics, especially at different boundary conditions and the missing simulation- and design tools. Also the lack of knowledge and empirical data are a reason why development projects with shape memory actuators often lead to failures. This paper deals with the dynamic properties of SMA-actuators (Shape Memory Alloy) — characterized by their rate of heating and cooling procedures — that today can only be described insufficiently for different boundary conditions. Based on an analysis of energy fluxes into and out of the actuator, a numerical model of flat-wire used in a bow-like structure, implemented in MATLAB/SIMULINK, is presented. Different actuation parameters, depending on the actuator-geometry and temperature are considered in the simulation in real time. Additionally this publication sums up the needed empirical data (e.g. fatigue behavior) in order to validate the numerical two dimensional model and presents empirical data on SMA flat wire material.

Sign in / Sign up

Export Citation Format

Share Document