scholarly journals The effect of cadmium contained in fertilizers on the cadmium content of vegetables

1979 ◽  
Vol 51 (1) ◽  
pp. 158-162 ◽  
Author(s):  
Antti Jaakkola ◽  
Johan Korkman ◽  
Tuomo Juvankoski
Keyword(s):  
Dry Matter ◽  
Fine Sand ◽  
The Other ◽  
Raw Material ◽  
Cadmium Content ◽  
Rye Grass ◽  
Wide Range ◽  
Npk Fertilizer ◽  
Clear Increase ◽  
Range Of Variation

The aim of the study was to find out to what extent the cadmium contained in fertilizer influences the cadmium content of vegetables. For this purpose, highly cadmium-bearing batches of fertilizer were prepared from selected quantities of raw material with an exceptionally high cadmium content. To one such batch of fertilizer, an extra amount of cadmium was added at the mixing stage. In a two-year field experiment carried out in soil consisting of clayey fine sand and begun in 1977, 1000 kg/ha of NPK fertilizer with a cadmium content of either 57 or 81 mg/kg brought about a clear increase in the cadmium content of radish tops. The cadmium content of radish roots, spinach and lettuce appeared likewise to rise, but the differences registered were not, owing to the unevenness of the field, significant. The cadmium content of the dry matter of rye grass was lower than that of the other experimental plants, and it appeared to rise less with an increase in the cadmium content of the fertilizer. Owing to the wide range of variation, the cadmium uptake of the experimental plants could not be determined reliably, The spinach, however, appeared to have taken up the largest amount of cadmium, and the rye grass the least amount. The increase in the cadmium content of the spinach harvested in 1978 corresponded to 1.5‰ of the cadmium introduced into the ground during the two-year period through application of the fertilizer with the highest content of the metallic element.

scholarly journals Variability of Different Yield Contributing Parameters and Yield of Some Okra (Abelmoschus esculentus) Accessions

1970 ◽  
Vol 4 (1) ◽  
pp. 119-127
Author(s):  
AKM Ashraful Alam ◽  
Md Mokbul Hossain
Keyword(s):  
Dry Matter ◽  
Positive Association ◽  
Matter Content ◽  
Path Coefficient ◽  
Dry Matter Content ◽  
Path Coefficient Analysis ◽  
Significant Positive Association ◽  
Wide Range ◽  
Range Of Variation ◽  
Genotypic Coefficient Of Variation

In order to assess the variability of yield contributing characters of 50 okra accessions and their interrelation effects on the yield of green pod a field experiment was undertaken at the Horticulture Farm of Bangladesh Agricultural University, Mymensingh during the period from February, 2002 to May, 2002. A wide range of variation was observed in case of weight of green pod per plant (105- 281g), days to first flowering (40-52days) and weight of individual green pod (14-26g). Moderate variation for length of green pod (12-19cm), number of green pods per plant (6-11) and yield of green pod (4-13 t/ha), lesser variation for percent of dry matter content (5-8%), number of ridges per green pod (5-9) and diameter of green pod (1-2cm) was observed. The highest genotypic coefficient of variation was observed in case of yield of green pod (GCV= 23.22%) followed by weight of green pod per plant (22.24%), weight of individual green pod (18.68%), number of ridges per green pod (13.49%), number of green pod per plant (10.84%), dry matter content of green pod (10.48%), diameter of green pod (6.90%) and length of green pod (6.24%). These characters suggested the existence of justifiable genetic distance among different cultivars. Correlation coefficient indicated that yield of green pod had highly significant positive association with weight of green pod per plant and weight of individual green pod. Path coefficient analysis showed that the weight of green pod per plant and weight of individual green pod were directly contributed towards the yield of green pod. Key words: Okra, accession, variability, yield.

Comparison of techniques for estimation offorage dry matter intake bygrazing beef cattle

2008 ◽  
Vol 88 (4) ◽  
pp. 693-701 ◽  
Author(s):  
M. Undi ◽  
C. Wilson ◽  
K. H. Ominski ◽  
K. M. Wittenberg
Keyword(s):  
Dry Matter ◽  
Energy Equation ◽  
Extreme Values ◽  
Average Daily Gain ◽  
The Other ◽  
Dry Matter Intake ◽  
Energy Concentration ◽  
Net Energy ◽  
Prediction Equations ◽  
Wide Range

Four techniques were compared for their ability to estimate forage dry matter intake (DMI) of grazing animals. In the Cage technique, 10 grazing cages were placed within each pasture, and forage inside and outside the cages was clipped from 0.25-m2 quadrats after 12 to 20 d of grazing. The difference between forage inside and outside the grazing cage represented forage consumed by grazing animals. The second technique used n-alkane controlled release capsules to measure DMI of individual grazing animals (N-alkane marker technique). The remaining two techniques were prediction equations; one utilized body weight (BW) and average daily gain (ADG) to estimate DMI (Minson equation) and the other related dietary net energy concentration and BW to DMI (Net Energy equation). The four methodologies were applied to a 3-yr study evaluating liquid hog manure on the productivity of grass pastures. The study utilized steers of a relatively uniform body size on six continuously grazed grass pastures. When individual animal intakes were compared, the Net Energy equation estimated lower (P < 0.05) DMI than the Minson equation, with the N-alkane marker technique being intermediate. Dry matter intake (mean ± SD, kg d-1) was 5.3 ± 0.76, 7.4 ± 1.86, and 6.5 ± 2.58 for the Net Energy equation, Minson equation, and N-alkane marker technique, respectively. The Cage technique estimated average DMI of animals in each pasture of 17.5 ± 11.61 kg d-1 and this was higher (P < 0.05) than estimates from the other techniques. Dry matter intake estimates from different techniques were ranked: Cage technique > Minson equation > N-alkane marker technique > Net Energy equation. The DMI estimates generated by the Cage technique were associated with the largest coefficient of variation, with extreme values representing a range from 0.3 to 15.2% BW. The N-alkane marker technique estimated DMI that ranged from 0.6 to 4.5% BW. The strongest correlation (r = 0.30; P = 0.001) in DMI estimates was between the Net Energy and Minson equations due to the inclusion of BW as a component in both equations. Results of this study suggest that prediction equations can be useful for rapid DMI estimation. The N-alkane marker technique may be the preferred technique when a wide range of pasture conditions is anticipated. Key words: Grazing cages, n-alkanes, prediction equations, dry matter intake, grazing animals

scholarly journals Content of pyrrolizidine alkaloids in the leaves of coltsfoot (Tussilago farfara L.) in Poland

2013 ◽  
Vol 82 (4) ◽  
pp. 289-293 ◽  
Author(s):  
Artur Adamczak ◽  
Bogna Opala ◽  
Agnieszka Gryszczyńska ◽  
Waldemar Buchwald
Keyword(s):  
Dry Matter ◽  
Room Temperature ◽  
Pyrrolizidine Alkaloids ◽  
Natural Populations ◽  
Common Species ◽  
Raw Material ◽  
Phytochemical Analysis ◽  
Tussilago Farfara ◽  
Wide Range ◽  
Genetically Determined

Coltsfoot (<em>Tussilago farfara</em> L.) is a common species, widely used in European and Chinese traditional medicine for the treatment of respiratory diseases. However, raw material from this plant contains hepatotoxic pyrrolizidine alkaloids (PAs). The aim of the study was to determine the variability of the level of PAs (senkirkine and senecionine) in leaves of coltsfoot originated from natural populations in Poland. In the phytochemical analysis, 20 samples of <em>T. farfara</em> were used. This plant material was obtained from the Garden of Medicinal Plants in Plewiska near Poznań and originated from different regions of Poland. Coltsfoot leaves were harvested in the middle of July of 2010 and then dried at room temperature. The alkaloid content was detected using the HPLC-DAD method. The amount of PAs in leaves of <em>T. farfara</em> changed in a wide range from 0.06 to 1.04 μg g<sup>−1</sup> of dry matter (DM). The content of senkirkine and senecionine was positively correlated (<em>r</em> = 0.68, <em>P</em> = 0.001). There was no statistically significant correlation between the amount of PAs as well as leaf weight and water content in leaves of <em>T. farfara</em>. Our results showed that a medium-sized leaf of coltsfoot (0.33 g DM) may contain from 0.02 to 0.34 μg of PAs (on average 0.14 μg). The level of PAs was not associated with the region of Poland, but phytochemical similarity of samples was usually visible at the local scale. Coltsfoot leaves are characterized by a high variability of the content of toxic PAs, much higher than in the case of the main active compounds, especially flavonoids and mucilage.<br /> This phytochemical variability is mainly genetically determined (samples came from a garden collection), and it can be increased by environmental factors. Our investigations indicate that Polish natural populations of <em>T. farfara</em> may provide raw material with a low level of toxic PAs.

scholarly journals Kinetic patterns and optimization of the process of concentration by freezing the blood of cattle

2019 ◽  
Vol 80 (4) ◽  
pp. 12-18
Author(s):  
S. T. Antipov ◽  
V. Yu. Ovsyannikov ◽  
A. A. Korchinskij
Keyword(s):  
Heat Exchange ◽  
Boiling Point ◽  
Dry Matter ◽  
Matter Content ◽  
Raw Material ◽  
Dry Matter Content ◽  
Wide Range ◽  
Experimental Apparatus ◽  
Heat Exchange Surface ◽  
Exchange Surface

The urgency of the use of blood components as a raw material for the production of products from it that contribute to the prevention and treatment of iron deficiency states is beyond doubt. In addition, protein compounds in the blood of cattle have a high digestibility of the human body, and the complex of essential amino acids determines its attractiveness as an additive in the development of a wide range of meat products. The only possible way at present to thicken thermo labile blood compounds is cryoconcentration, carried out in a temperature range close to the cryoscopy temperature. The kinetic features of cryoconcentration of cattle blood were investigated on an experimental apparatus of cyclic action. It is shown that the conditions of cryoconcentration are determined by the boiling point of the refrigerant in the evaporator of the installation, the flow rate of the original blood washing the heat exchange surface and the content of soluble compounds in the initial liquid. Experimental data are presented in the form of growth curves of frozen ice on the heat exchange surface with an area of 0.2 m2. Using mathematical planning methods, equations are obtained that describe the amount of ice frozen for 1 hour per unit of surface area of the freezing plant, the specific energy input for freezing one kilogram of ice, and the dry matter content of the blood in the solution obtained by melting the frozen ice. The solved problem of optimizing the process of blood cryoconcentration made it possible to find rational intervals for changing the operating parameters of the freezing plant, ensuring the maximum amount of frozen ice, minimal energy costs and minimal content of soluble substances in the solution obtained by melting frozen ice. The suboptimal intervals of the indicated parameters were the following: refrigerant boiling point 256– 260 K, blood consumption (0.20–0.205)·10-3 m3/s, dry matter content 22.5–23.0 %.

I. Researches on the foraminifera

1859 ◽  
Vol 149 ◽  
pp. 1-41 ◽  
Keyword(s):  
General Structure ◽  
Detailed Comparison ◽  
The Body ◽  
The Other ◽  
General Plan ◽  
Wide Range ◽  
Preceding Case ◽  
Adjacent Segments ◽  
Comparative Inquiry ◽  
Range Of Variation

119. In my preceding memoirs, I have shown that two very dissimilar types of structure present themselves among the Foraminifera; one characterized by its simplicity, the other by its complexity. In the former, of which Orbitolites , Orbiculina , and Alveolina are typical examples, the calcareous skeleton does not present any definite indications of organization, but seems to have been formed by the simple calcification of a portion of the homogeneous sarcode-body of the animal; that the sarcode-body is but very imperfectly divided into segments, the communications between the cavities occupied by these segments being very free and irregular; the form of the segments themselves, and the mode of their connexion, are alike inconsistent; and even the plan of growth, on which the character of the organism as a whole depends, though preserving a general uniformity, is by no means invariable maintained. In the latter, to which Cycloclypeus and Heterostegina belong, we find the calcareous skeleton presenting a very definite and elaborate organization; the several segments of the body are so completely separated from each other, that they remain connected only by delicate threads of sarcode; each segment thus isolated has its own proper calcareous envelope, which seems to be moulded (as it were) upon it, and this envelope or shell is perforated with minute parallel tubuli, closely resembling those of dentine except in the absence of bifurcation or ramification; the partition-walls between adjacent segments are consequently double, and are strengthened by an intermediate calcareous deposit, which is traversed by a system of inosculating passages that seems properly to belong to it. The form of the segments, their mode of communication, and consequently the general plan of growth, have a very considerable degree of constancy; and altogether the tendency is strongly manifested in this type, to the greater individualization of the parts of the composite body, which in the preceding must be looked upon rather as constituting one aggregate whole. 120. I purpose in the present memoir to carry on this contrast, by presenting a detailed comparison of the structure of two generic forms, which, whilst they so far agree in general plan of growth as not only to have been ranked by M. d'Orbigny side bv side in his order Hélicostègues , but to have been placed by other systematists in close apposition, differ in the most marked manner as to all the particulars just enumerated. Both these types are of peculiar interest:- the first, Peneroplis , on account of the very wide range of variation it presents, which has led to the establishment of three genera , apparently distinguishable by well-marked differences in conformation, upon what I feel satisfied will prove to be but individual modifications of one and the same specific type ;— the second, Operculina , as being the nearest existing representative of Nummulites , and consequently as affording not merely the key to the elucidation of the structure, but also the basis for the determination of the value of the reputed species, of that genus, by the study of the range of variation which it presents; this range being, though more restricted than in the preceding case, still quite sufficient to justify a large multiplication of species, in the estimation of those who do not practise that extended method of comparative inquiry, on the importance of which I have dwelt in a former Memoir (74). With the latter of these genera, as also with Nummulites , I shall prove that the genus Amphistegina is closely allied; although M. d’Orbigny, misled by the marked want of symmetry and by the alternation in the disposition of the chambers, which are exhibited by certain forms of that type, has placed it in a different order, Entomostègues . For I shall have to show that a gradational variety in this respect, ending in complete symmetry, may coincide with such a uniformity in general structure, that even a very decided departure from symmetry must be regarded as a character of little value in classification, compared with agreement in the organization of the shell and in those peculiarities in the conformation of the animal which are indicated by it; and further, that a most marked difference in degree of organization exists between two species of Amphistegina , which so closely resemble each other externally that the young of one may easily be mistaken for the adult of the other.

When children reach beyond their grasp: why some children make pronoun case errors and others don't

2005 ◽  
Vol 32 (1) ◽  
pp. 93-116 ◽  
Author(s):  
MATTHEW RISPOLI
Keyword(s):  
Cross Section ◽  
Analysis Of Variance ◽  
Error Rate ◽  
Sentence Production ◽  
The Other ◽  
Word Form ◽  
Grammatical Development ◽  
Child Interaction ◽  
Wide Range ◽  
Range Of Variation

This research addresses the question of why some children are disposed to making a large number of pronoun case errors and others are not. The answer proposed is that when pronoun paradigm building outstrips the development of INFL, children become especially vulnerable to erring in the choice of pronominal word form, resulting in pronoun case error. On the other hand, when pronoun paradigm building proceeds more conservatively, the risk of error is reduced. The spontaneous sentence production of children observed in naturalistic caregiver – child interaction from a cross-section of 44 children (2;0–4;0) is used to support this proposal. The data show that pronoun case error was minimal among children who had strong INFL. However, among children with weak INFL there was a wide range of variation, some children making many errors and others making none. Analysis of variance confirmed that this variation was strongly related to the dispersion of production attempts across an extended pronoun paradigm, such that, the fewer cells attempted, the lower the error rate. These findings show that pronoun case errors are not an inevitable result of grammatical development, but may conceivably be avoided altogether if paradigm building proceeds at a rate commensurate with the child's development of INFL.

Processability Testing

1981 ◽  
Vol 54 (3) ◽  
pp. 493-534 ◽  
Author(s):  
R. H. Norman ◽  
P. S. Johnson
Keyword(s):  
Process Control ◽  
The Other ◽  
Raw Material ◽  
Single Type ◽  
Large Strains ◽  
Fixed Temperature ◽  
Shear Rates ◽  
Other Hand ◽  
Wide Range ◽  
The Cost

Abstract There should be no need for processability testing. If one controls adequately all the raw materials and all the processes prior to the tests, then the resultant materials will all have predictable processability. In the real world, one can try, but never achieve, this state of perfection, so that some processability testing may be essential for process control purposes. The progression from (a) dumping a mixed batch at constant cycle time to (b) dumping at a fixed temperature to (c) dumping at a fixed unit work shows a progressive attempt to produce a more consistent material in spite of the imperfections of the raw material and the process. No one processability tester is adequate for all purposes. The choice of processability testers for process control depends upon the polymer and the subsequent process to which the material or mix is to be subjected. Factors which can be significant are times, shear rates, temperatures, and whether the test modifies the relevant properties. Most of the published information relating to process control relates to controlled experiments rather than to processing under normal factory conditions. However, it is probable that much information on factory experience remains unpublished in order to avoid disclosure of commercially valuable information or, on the other hand, to avoid admission of mixing failures. The cost of purchasing and running the processability testing equipment has to be balanced against the costs of not recognizing a bad batch and the cost of delaying further processing while the tests are made. For these reasons no general recommendation can be made except that a single piece of data is insufficient to characterize either a polymer or a mix. Any factory will probably need several types of processability testing if it wants more than a very cursory view of the material being processed. The choice of a processability test for development of mix composition depends upon the degree of information which it is economical to acquire. If an order calls for an isolated 400 kg of material for a noncritical application, it may be worth doing no processability testing at all. On the other hand, if a factory is to produce hundreds of tonnes per week of a single type of mix, it is well worth while discovering considerable detail about the characteristics of that mix. In this case, equipment providing fundamental data over a wide range of shear rates and at small and large strains may avoid carrying processes so near to a critical condition that any slight change in material or process may cause a catastrophe. Many factory activities fall between these examples and thus require individual consideration.

Studies on the cutting management of grass-clover swards. IV. The effects of close and lax cutting on the yield of herbage from swards cut at different frequencies

1966 ◽  
Vol 66 (1) ◽  
pp. 101-106 ◽  
Author(s):  
D. Reid
Keyword(s):  
White Clover ◽  
Dry Matter ◽  
Ground Level ◽  
Growing Season ◽  
The Other ◽  
Yield Increase ◽  
Rye Grass ◽  
Cutting Frequency ◽  
Cutting Management ◽  
Time Basis

1. The effects of cutting herbage to either 1 in. or 2½ in. from ground level were studied at varying cutting frequencies in two experiments on a perennial rye-grass/white-clover sward. In one of the experiments the frequency of cutting was decided by the stage of growth of the herbage, and in the other it was decided on a time basis where cutting was carried out at intervals of 2, 4 or 6 weeks throughout the growing season.2. Greater yields of herbage dry matter were obtained by cutting to 1 in. rather than to 2½ in. at all cutting frequencies in both experiments. This effect did not vary significantly with frequency of cutting where cutting dates were decided by the stage of growth of the herbage. However, where the cutting frequency was decided on a time basis, close cutting gave a relatively greater yield increase compared with lax cutting where the herbage was cut every 2 weeks instead of every 4 or 6 weeks.3. The results suggest that the practice of cutting at an average stage of growth in previous experiments probably had little or no influence on the effects recorded for the contrasting closeness of cutting treatments.

2D Color-Intensity Representation of Ultrasonic Thickness Gauge Measurements

2020 ◽  
pp. 1192-1198
Author(s):  
M.S. Mohammad ◽  
Tibebe Tesfaye ◽  
Kim Ki-Seong
Keyword(s):  
Cost Effective ◽  
The Other ◽  
Thickness Gauge ◽  
Color Intensity ◽  
Digital Readout ◽  
Flat Surfaces ◽  
Video Cameras ◽  
Wide Range ◽  
Cost Effective Alternative ◽  
Ultrasonic Thickness

Ultrasonic thickness gauges are easy to operate and reliable, and can be used to measure a wide range of thicknesses and inspect all engineering materials. Supplementing the simple ultrasonic thickness gauges that present results in either a digital readout or as an A-scan with systems that enable correlating the measured values to their positions on the inspected surface to produce a two-dimensional (2D) thickness representation can extend their benefits and provide a cost-effective alternative to expensive advanced C-scan machines. In previous work, the authors introduced a system for the positioning and mapping of the values measured by the ultrasonic thickness gauges and flaw detectors (Tesfaye et al. 2019). The system is an alternative to the systems that use mechanical scanners, encoders, and sophisticated UT machines. It used a camera to record the probe’s movement and a projected laser grid obtained by a laser pattern generator to locate the probe on the inspected surface. In this paper, a novel system is proposed to be applied to flat surfaces, in addition to overcoming the other limitations posed due to the use of the laser projection. The proposed system uses two video cameras, one to monitor the probe’s movement on the inspected surface and the other to capture the corresponding digital readout of the thickness gauge. The acquired images of the probe’s position and thickness gauge readout are processed to plot the measured data in a 2D color-coded map. The system is meant to be simpler and more effective than the previous development.

Automation of Process Control in Chemical Plant

2015 ◽  
Vol 2 (1) ◽  
pp. 6-12
Author(s):  
Agus Sugiarta ◽  
Houtman P. Siregar ◽  
Dedy Loebis
Keyword(s):  
Process Control ◽  
Pid Control ◽  
Control Algorithm ◽  
Chemical Engineering ◽  
Chemical Plant ◽  
Raw Material ◽  
Flow Rates ◽  
Material Supply ◽  
Wide Range ◽  
Inherent Problem

Automation of process control in chemical plant is an inspiring application field of mechatronicengineering. In order to understand the complexity of the automation and its application requireknowledges of chemical engineering, mechatronic and other numerous interconnected studies.The background of this paper is an inherent problem of overheating due to lack of level controlsystem. The objective of this research is to control the dynamic process of desired level more tightlywhich is able to stabilize raw material supply into the chemical plant system.The chemical plant is operated within a wide range of feed compositions and flow rates whichmake the process control become difficult. This research uses modelling for efficiency reason andanalyzes the model by PID control algorithm along with its simulations by using Matlab.

Sign in / Sign up

Export Citation Format

Share Document