scholarly journals PENGEMBANGAN MEDIA PEMBELAJARAN KETERAMPILAN MENYIMAK DAN MEMBACA BERBASIS MULTIMEDIA INTERAKTIF SISWA KELAS IV SEKOLAH DASAR

Author(s):  
Endang Sri Maruti

<p>This research aims to develop interactive multimedia-based instructional media in order to improve students' listening and reading skills. This research refers to the development of 4-D method. 33 test subjects as children. Validation of research instruments are sheets, observation sheets, questionnaires, and learning tests. Data collection techniques used validation and observation techniques. Techniques of data analysis used qualitative descriptive data. Lesson plan results demonstrate feasibility can be trusted with a good reliability of the instrument category. The observation of student activity meets the criteria specified limits effectiveness. Based on the questionnaire responses of students, learning with interactive CD was interesting. Student learning outcomes showed positive development. Thus, the products developed have been effective.</p><p> </p><p> </p><p> </p>

2015 ◽  
Vol 3 (3) ◽  
pp. 211
Author(s):  
Widha Nur Hasnah ◽  
M. Arifuddin Jamal ◽  
Sri Hartini

The low of student learning outcomes because students are less active during learning, that’s why the need conduct research that aims to improve student learning outcomes. This study describes (1) lesson plan, (2) learning outcomes, (3) social skills. This research is classroom action research hopkins model that includes planning, implementation, observation and reflection as much as 3 cycles. Data collection techniques such as observation, testing, and documents. Data analysis of quantitative and qualitative descriptive. The results showed that (1) the percentage of first cycle lesson plan (RPP) implementation is 80,00%, 91,33% in second cycle and third cycle is 97,33%, (2) mastery learning outcomes of students has increased from first cycle 51,61% , 77,43% in the second cycle, and to 87.04% in the third cycle, (3) the student's social skills in the first cycle of 96,97% with very good category, II 97,86% with very good category, and 97,86% in the third cycle with very good category, Retrieved conclusion that cooperative learning  model TAI type can improve student learning outcomes with focusing in drill to students can increase creavity and students social skill with give a motivation and guidance to student which has a problem on study class.  


2020 ◽  
Vol 4 (2) ◽  
pp. 165
Author(s):  
Kamaruddin Hasan ◽  
Nurul Mukhlisa ◽  
Ayu Lestari

The purpose of this study was to determine: (1) The Process of Application of the SAVI Model in Social Studies Subjects for Class IV MI DDI Jabal Nur Parepare Students, (2) Social Studies Learning Outcomes for Class IV MI DDI Jabal Nur Parepare Students through the application of the SAVI Model. The approach used is a qualitative approach and the type of research used is classroom action research. This research focuses on the process and student learning outcomes. Data collection techniques used are observation, testing, and documentation. Then, analyzed using qualitative descriptive data analysis. The conclusion in this study is that by applying the SAVI model can improve social studies learning outcomes about production equipment, communication and transportation in class IV MI DDI Jabal Nur Parepare students.


2019 ◽  
Vol 1 (2) ◽  
pp. 54-70
Author(s):  
Kasmah Kasmah ◽  
Syamsir Bin Rukka

>This research was aimed at investigating (1) lesson plan based on scientific approach as curriculum 2013 in the class VII of MTs Negeri DDI Jolle; (2) the implementation of English learning based on saintific approach; (3) the model of the learning in the curriculum 2013; (4) the use of instructional media; and (5) the assessment process based on curriculum 2013. This research was qualitative descriptive. Data were collected by using documentation, observation, and interview. The results showed that (1) lesson plan used in english learning in the class VII of MTs DDI Jolle accordance to Ministry Rule (Permen) No. 58, 2014; (2) the learning process has reflected the achievement of KI-1, KI-2, KI-3, and KI-4; (3) English learning based on a scientific approach covering five learning experience of observing, questioning, experimenting, associating and communicating feasible although it still not optimal; (4) the use of instructional media is not maximized because infocus display less clear and not attractive; (5) the assessment consist of attitude, knowledge, and skill. Based on this research suggested to the teachers to familiarize themselves communicating in English. Principals should consider the availability of instructional media. Other researchers are advised to conduct research related to the assessment process in curriculum 2013


2017 ◽  
Vol 5 (3) ◽  
pp. 301
Author(s):  
Sajarotunnur '

This study aims to improve student learning outcomes by applying the method VII.2 classassignment sheet giving students conducted in March and April 2016. Subjects were seventhgrade students of SMP Negeri 2 Dumai totaling 26 students. The parameters in this study isthe absorption and mastery learning as well as student activities and teacher activities assupporting data. The research instrument used is the study and data collection instruments.The device consists of a learning syllabus, lesson plan, test, observation of student activitysheets, activity sheets teacher observation. The survey results revealed absorption of studentsin the first cycle is 70% with moderate category and second cycle increased to 78% in thehigh category. Mastery learning of students in the first cycle is 88.46% and 88.50% in thesecond cycle students completed. Activities of students in the first cycle an average of80.76%% (very good) and the second cycle is an increase of 97.5% (excellent). It can beconcluded that the method of administration of the student assignment sheet can improvestudent learning outcomes in the classroom ecosystem VII 2 material SMP Negeri 2 Dumai.


2018 ◽  
Vol 2 (2) ◽  
pp. 156
Author(s):  
Zulkifli Zulkifli

This research is based on the low learning outcome of mathematics students of grade VIII SMPN 4 Tambang.The purpose of this research is to improve the learning outcomes of mathematics through the application ofinquiry learning with CTL approach. This research was conducted in SMPN 4 Tambang with subject of classVIII-D students with 29 students. This classroom action research was started in early January 2017. Theresearch instrument consists of a teacher and student activity sheet instrument and a test of learning outcomes.Based on the results of research and discussion can be concluded that the strategy of inquiry learning with CTLapproach can improve student learning outcomes of mathematics on the subject matter of algebraic form inclass VIII-D SMPN 4 Tambang. On the basic score the number of students who reached the KKM as many as 14people (48.28%) with an average score of 58.79. In cycle I the number of students who reach the KKM of 19people (65.52%) with an average value of 65.69%. In cycle II the number reaching KKM is 25 people (86.21%).


2017 ◽  
Vol 1 (1) ◽  
pp. 85
Author(s):  
Delfi Yendri

This research is motivated by the poor results of Study Social Sciences (IPS) Student Class VI SDN 024 Tarai Bangun Kecamatan Tambang. This study aims to determine the resulting increase studying social sciences (IPS) student class VI SDN 024 Tarai Bangun Kecamatan Tambang through the application of learning strategies go to yuor post, which carried out for 1 month. The subjects were VI SDN 024 Tarai Bangun Kecamatan Tambang by the number of students as many as 38 people. Form of research is classroom action research. The research instrument consists of instruments and instrument performance data collection activity observation sheet form teacher and student activity. Based on the research, the conclusion to this study is based on the analysis and discussion in chapter IV can be concluded that the application of learning strategies go to yuor post can improve learning outcomes in the subject of social sciences grade VI SDN 024 Tarai Bangun Kecamatan Tambang. Evidenced by the increase in learning outcomes before action to the first cycle, to cycle II. Before the act of student learning outcomes classified as unresolved with an average of 59%, an increase in the first cycle by an average of 69%. While the results of student learning in the second cycle must be increased by an average of 75% with the category completed.


2018 ◽  
Vol 2 (3) ◽  
pp. 468
Author(s):  
Zulhamdi Zulhamdi

This research is based on the result of science learning of grade VI students of SD Negeri 018 Kubang JayaKecamatan Siak Hulu Kabupaten Kampar which is still very low. This study aims to improve science learningoutcomes. From the data analysis, there was an increase of both teacher activity, student activity, and studentlearning result. The teacher activity at the 1st cycle meeting percentage was 70% (good) and at the 2nd meetingincreased 5% to 75% (good). In the second cycle of the meeting 3 teacher activities increased 10% from 75%(good) to 85% (very good) and at meeting 4 increased 10% from 85% (very good) to 95% (very good). Judgingfrom the student activity also increased from the 1st meeting of cycle I was 65% (enough) and at meeting 2increased 15% to 80% (good). In the second cycle of meeting 3 it increases 5% from 80% (good) to 85% (verygood) and at meeting 4 increases 10% from 85% (very good) to 95% (very good). Judging from the results of thestudents also experienced preningkat, from the average score of students on a basic score of 62.78. after the firstcycle the student's average score increased to 79.44 with an increase of 16.66 points from the baseline score. Inthe second cycle student learning outcomes also increased as much as 11.67 points from cycle I with averagestudent's grade 91.11. From the data analysis there is an increase both from teacher activity, student activity,and student learning outcomes. It can be concluded that the advancement of contextual learning can improve thelearning outcomes of science students of grade 6 of SD Negeri 018 Kubang Jaya Kecamatan Siak HuluKabupaten Kampar.


2018 ◽  
Vol 2 (3) ◽  
pp. 405
Author(s):  
Heldaenni Heldaenni

This research is motivated by the learning result of Social Sciences of second grade II students of primary school025 Teluk Binjai Dumai Timur which is still very low. This study aims to improve learning outcomes of SocialSciences students. From the data analysis there is an increase of both teacher activity, student activity, andstudent learning result, that is teacher activity at meeting 1 cycle I the percentage is 64% (enough) and atmeeting 2 increase to 76% (good). In the second cycle of meeting 3 increased again to 88% (very good) and at4th meeting increased to 96% (very good). Judging from the student activity also increased from the 1st cyclemeeting I was 62,5% (enough) and at the 2nd meeting increased to 70.83% (good). In cycle II the 3rd meetingincreased to 83,83% (good) and at the 4th meeting to 91.66% (very good). Judging from student learningoutcomes, the average base score of 60 increased to 70 in the first cycle of increase 10 points later in cycle IIincreased to 90 in cycle II large increase of 20 points. From the data analysis there is an increase both fromteacher activity, student activity, and student learning outcomes. It can be concluded that the advancement of themodel of cooperative learning type make a match can improve the learning result of Social Sciences of secondgrade students of SD Negeri 025 Teluk Binjai Dumai Timur.


2018 ◽  
Vol 2 (3) ◽  
pp. 395
Author(s):  
Burhanuddin Burhanuddin

This research is motivated by the learning result of Social Sciences of Grade VI SD Negeri 022 Jaya Mukti KotaDumai which is still very low. This study aims to improve the learning outcomes of Social Sciences students.From the data analysis there is an increase of both teacher activity, student activity, and student learning result,that is teacher activity at meeting 1 cycle I percentage is 65% (enough) and at meeting 2 increase to 80%(good). In the second cycle of meeting 3 it increases again to 90% (very good) and at meeting 4 increases to95% (very good). Judging from the student activity also increased from the 1st meeting of cycle I was 60%(enough) and at meeting 2 increased to 70% (good). In the second cycle of meeting 3 it increased to 85% (verygood) and at the 4th meeting to 95% (very good). Judging from student learning outcomes, the average basicscore 63 increased to 75 in the first cycle of increase 12 points later in cycle II increased to 95 in cycle II largeincrease of 20 points. From the data analysis there is an increase both from teacher activity, student activity,and student learning outcomes. It can be concluded that the Improved Learning Model concept map can improvethe learning outcomes of IPS students of class VI SD Negeri 022 Jaya Mukti Kota Dumai.


2020 ◽  
Vol 6 (2) ◽  
pp. 169
Author(s):  
Philip Nababan ◽  
Efendi Napitupulu ◽  
R Mursid

Abstrak: Penelitian ini bertujuan untuk: (1) Mengetahui tanggapan siswa terhadap kualitas media pembelajaran interaktif pada pembelajaran Teknik Pemesinan Bubut. (2) Mengetahui keefektifan media pembelajaran interaktif pada pembelajaran Teknik Pemesinan Bubut pada siswa program keahlian Teknik Pemesinan. Jenis penelitian ini adalah penelitian pengembangan. Data tentang kualitas produk pengembangan ini dikumpulkan dengan angket dan dianalisis dengan teknik analisis deskriptif kualiatatif. Hasil penelitian menunjukkan bahwa; (1) uji ahli materi pelajaran Teknik Pemesinan Bubut berada pada kualifikasi sangat baik (88,92%), (2) uji ahli desain pembelajaran berada pada kualifikasi sangat baik (85,21%), (3) uji ahli rekayasa perangkat lunak berada pada kualifikasi sangat baik (84,03%), (4) uji coba perorangan berada pada kualifikasi sangat baik (88,75%), (5) uji coba kelompok kecil berada pada kualifikasi sangat baik (91,35%) dan (5) uji coba lapangan berada pada kualifikasi sangat baik (88,31%). Hasil pengujian hipotesis membuktikan bahwa terdapat perbedaan antara hasil belajar siswa yang menggunakan media pembelajaran interaktif  dengan hasil belajar siswa yang menggunakan buku teks. Hal ini ditunjukkan dengan hasil pengolahan data diperoleh  thitung sebesar 4,68 dan ttabel sebesar 1,67 pada taraf kepercayaan 95 persen. Maka diperoleh bahwa thitung> ttabel. Disimpulkan bahwa  hasil belajar siswa yang menggunakan media pembelajaran interaktif dengan efektifitas sebesar 72,77 %. lebih tinggi dari hasil belajar siswa yang diajar dengan pembelajaran menggunakan buku teks dengan efektifitas sebesar 62,13%. Kata Kunci: media pembelajaran interaktif, teknik pemesinan bubut Abstract: This study aims to: (1) Determine student responses to the quality of interactive learning media on learning Lathe Machining Techniques. (2) Knowing the effectiveness of interactive learning media on learning of Machining Lathe in students of Machining Engineering expertise program. This type of research is development research. Data about the quality of this development product was collected by a questionnaire and analyzed by qualitative descriptive analysis techniques. The results showed that; (1) Lathe machining engineering subject matter expert test is in very good qualification (88.92%), (2) learning design expert test is in very good qualification (85.21%), (3) software engineering expert test is in in very good qualifications (84.03%), (4) individual trials were in very good qualifications (88.75%), (5) small group trials were in very good qualifications (91.35%) and (5 ) field trials are in very good qualifications (88.31%). Hypothesis testing results prove that there are differences between student learning outcomes using interactive learning media with student learning outcomes using textbooks. This is indicated by the results of data processing obtained by tcount of 4.68 and ttable of 1.67 at a confidence level of 95 percent. Then it is obtained that tcount> ttable. It was concluded that student learning outcomes using interactive learning media with an effectiveness of 72.77%. higher than student learning outcomes taught by learning to use textbooks with an effectiveness of 62.13%. Keywords: interactive learning media, lathe machining techniques


Sign in / Sign up

Export Citation Format

Share Document