scholarly journals PENGARUH PEMBERIAN PUPUK NPK GROWER DAN DEFOLIASI TERHADAP PERKEMBANGAN BIJI DAN PRODUKSITANAMAN JAGUNG (Zea mays L.)

2019 ◽  
Vol 33 (3) ◽  
pp. 303-316
Author(s):  
Prihatin Ponco Pamungkas ◽  
Maizar Maizar ◽  
Sulhaswardi Sulhaswardi
Keyword(s):  
Moisture Content ◽  
Dry Matter ◽  
Dry Weight ◽  
Fertilizer Treatment ◽  
Observation Data ◽  
Dry Matter Accumulation ◽  
Seed Moisture Content ◽  
Seed Moisture ◽  
Filling Time ◽  
Main Effect

The study aimed to determine the effect of giving NPK Grower fertilizer and defoliation to seed development and corn crop production. The design used in this study was a Factorial Completely Randomized Design consisting of two factors. The first factor is NPK Grower (N) fertilizer with a dose of 0, 7.5, 15, 22.5g / plant while the second factor is Defoliation (D) with some 0, 2, 4, all leaves under the cob. The parameters observed were changes in seed dry weight (g), changes in seed moisture content (%), speed of accumulation of dry matter (mg / seeds / day), effective filling time (days), harvest age (days), and dry shelled weight ( g). The last observation data were analyzed statistically and continued with a BNJ follow-up test at the level of 5%. The results showed that interactively giving NPK Grower and Defoliation fertilizer had a significant effect on changes in seed dry weight, changes in seed moisture content, speed of dry matter accumulation, harvest age and dry shell weight. The best treatment is in the combination of 22.5g / plant NPK Grower fertilizer treatment and Defoliation of all leaves under the cob (N3D3). The main effect of NPK Grower fertilizer has a significant effect on all parameters. The best treatment for NPK Grower fertilizer is 22.5g / plant (N3). The main effect of Defoliation has a significant effect on all parameters. Best treatment Defoliate all leaves under the cob (D3).

scholarly journals Ideal seeds harvest moment of different maize hybrids

2014 ◽  
Vol 44 (2) ◽  
pp. 253-260 ◽  
Author(s):  
Elias Abrahão Jacob Junior ◽  
Liliane Marcia Mertz ◽  
Fernando Augusto Henning ◽  
Silmar Teichert Peske ◽  
Francisco Amaral Villela ◽  
...  
Keyword(s):  
Moisture Content ◽  
Dry Matter ◽  
Development Stage ◽  
Accelerated Ageing ◽  
Dry Matter Accumulation ◽  
Layer Formation ◽  
Seed Moisture Content ◽  
Seed Moisture ◽  
Black Layer ◽  
The Ideal

The aim of this study was to identify the ideal maize seed harvest moment by different characteristics, as black layer formation, milk line development, seed moisture content and seed dry matter accumulation. Three simple hybrids from Syngenta Company were used in this work; ears from plants in the same development stage were collected, the first harvesting began 40 days after flowering, at four days interval until all seeds in an ear had the black layer formation. The characteristics evaluated were: black layer formation, milk line development, seed moisture content and seed dry matter. Seed physiological quality was evaluated by germination test, cold test, accelerated ageing and electrical conductivity. Results obtained in this study showed that the best indicative to identify the ideal maize seeds harvest moment is milk line stage 4 (75% of solidified endosperm). This stage occurs at different time for each genotype studied, 60DAF to hybrids 1 and 3, and 52DAF to hybrid 2, due to genetic differences among the hybrids.

Seed development in Malva parviflora: onset of germinability, dormancy and desiccation tolerance

2007 ◽  
Vol 47 (6) ◽  
pp. 683 ◽  
Author(s):  
Pippa J. Michael ◽  
Kathryn J. Steadman ◽  
Julie A. Plummer
Keyword(s):  
Moisture Content ◽  
Seed Development ◽  
Desiccation Tolerance ◽  
Dry Weight ◽  
Physical Dormancy ◽  
Seed Moisture Content ◽  
Physiological Maturity ◽  
Seed Moisture ◽  
Physiological Dormancy ◽  
Malva Parviflora

Seed development was examined in Malva parviflora. The first flower opened 51 days after germination; flowers were tagged on the day that they opened and monitored for 33 days. Seeds were collected at 12 stages during this period and used to determine moisture content, germination of fresh seeds and desiccation tolerance (seeds dried to 10% moisture content followed by germination testing). Seed moisture content decreased as seeds developed, whereas fresh (max. 296 mg) and dry weight (max. 212 mg) increased to peak at 12–15 and ~21 days after flowering (DAF), respectively. Therefore, physiological maturity occurred at 21 DAF, when seed moisture content was 16–21%. Seeds were capable of germinating early in development, reaching a maximum of 63% at 9 DAF, but germination declined as development continued, presumably due to the imposition of physiological dormancy. Physical dormancy developed at or after physiological maturity, once seed moisture content declined below 20%. Seeds were able to tolerate desiccation from 18 DAF; desiccation hastened development of physical dormancy and improved germination. These results provide important information regarding M. parviflora seed development, which will ultimately improve weed control techniques aimed at preventing seed set and further additions to the seed bank.

Leek (Allium porrum L.) seed development and germination

1992 ◽  
Vol 2 (2) ◽  
pp. 89-95 ◽  
Author(s):  
D. Gray ◽  
J. R. A. Steckel ◽  
L. J. Hands
Keyword(s):  
Moisture Content ◽  
Seed Development ◽  
Developmental Stages ◽  
Dry Weight ◽  
Allium Porrum ◽  
Seed Moisture Content ◽  
Subsequent Performance ◽  
Moisture Contents ◽  
Seed Moisture ◽  
Seed Growth

AbstractThe effects of development of leek seeds at 20/10°, 25/15° and 30/20°C (day/night) and drying of seed harvested at different developmental stages on subsequent performance were examined in each of 3 years. An increase in temperature from 20/10° to 30/20°C reduced mean seed weight from 2.90 to 2.55 mg as a result of a reduction in the duration of seed growth from 80 to 55 days; seed growth rate was unaffected. Seed moisture content reached a minimum, up to 35 days after the attainment of maximum seed dry weight and 115, 90 and 70 days after anthesis at 20/10°, 25/15° and 30/20°C, respectively. The curves relating seed moisture to time for each temperature regime were mapped onto a single line accounting for >90% of the variation in moisture content, using accumulated day-degrees >6°C instead of chronological time. Seeds were capable of germinating when seed moisture contents were >60% (fresh weight basis), but maximum viability and minimum mean time to germination were not attained until seed moisture contents at harvest had fallen to 20–30%. Germination was little affected by temperature of seed development. Drying immature seeds increased percentage germination. Growing seeds at 30/20°C and drying at 35°C and 30% RH raised the upper temperature limit of germination compared with growing at 20/10°C and drying at 15°C and 30% RH.

scholarly journals The effect of season and fertilizer on the LAI, the photosynthesis and the yield of the maize hybrids with different genetic characteristics

2006 ◽  
pp. 27-34
Author(s):  
Nóra El Hallof ◽  
Mihály Sárvári
Keyword(s):  
Moisture Content ◽  
Crop Production ◽  
Photosynthetic Activity ◽  
Moisture Loss ◽  
Fertilizer Treatment ◽  
Seed Moisture Content ◽  
Genetic Characteristics ◽  
Maize Hybrids ◽  
Seed Moisture ◽  
Significant Difference

The experiment was carried out in Debrecen, at the Experimental Station of the University of Debrecen Centre of Agricultural Sciences, Department of Crop Production and Applied Ecology. We tested 10 various hybrids with their own genetic characteristics for five different fertilizer doses, in addition to the parcels without fertilization. The three factors of production technology jointly determine the successfully of maize production, but in different measure. The yield and the stability of yield of maize can be increased with hybrid-specific technologies.In 2004-2005 experiment years the favorable results reached were due to the rainy season. There were significant difference between the productivity of maize hybrids. The N 40, P2O5 25, K2O 30 kg/ha treatment caused the highest increase of yield (3-5 t/ha) compared to the control (parcels without fertilization). The reaction of hybrids to the further fertilizer doses was different. The agro-ecological optimum of NPK fertilization was N 120, P 75, K 90 kg of the most hybrids.During the experiment, we tested the moisture loss of the five hybrids. The seed moisture content at harvest was higher than in previous years due to the rainy seasons. The seed moisture content of harvest of FAO 200-300 hybrids were about 20%. It changed between 21-24% in the case of hybrids with longer vegetation period (FAO 400), the seed moisture content of Mv Vilma (FAO 510) was 24.21-25.04% in the average of fertilizer treatments. There is an important difference between the moisture loss ability of hybrids which changed 0.2-0.6%/day. The moisture loss of hybrids changed depending on the fertilizer treatment; usually, it was more favorable in the optimal fertilizer dose (N120+PK).In the case of tested hybrids, we measured the highest LAI and photosynthetic activity at the optimal treatment, N 120, P2O5 75, K2O 90 kg/ha in the respect of efficiency and environmental protection, and the yield was high also for this treatment. There are significant difference between the LAI, the photosynthetic activity and the yield of hybrids, and these values could change depending on the treatment of fertilization.

Tolerance of Otebo Bean (Phaseolus vulgaris) to New Herbicides in Ontario

2006 ◽  
Vol 20 (4) ◽  
pp. 862-866 ◽  
Author(s):  
Peter H. Sikkema ◽  
Darren E. Robinson ◽  
Christy Shropshire ◽  
Nader Soltani
Keyword(s):  
Moisture Content ◽  
Plant Height ◽  
Weed Management ◽  
Safety Margin ◽  
Dry Weight ◽  
Field Trials ◽  
High Rate ◽  
Seed Moisture Content ◽  
Shoot Dry Weight ◽  
Seed Moisture

Weed management is a major production issue facing otebo bean growers in Ontario. Field trials were conducted at six Ontario locations during a 2-yr period (2003 and 2004) to evaluate the tolerance of otebo bean to the preplant incorporated (PPI) application of EPTC at 4,400 and 8,800 g ai/ha, trifluralin at 1,155 and 2,310 g ai/ha, dimethenamid at 1,250 and 2,500 g ai/ha,S-metolachlor at 1,600 and 3,200 g ai/ha, and imazethapyr at 75 and 150 g ai/ha. EPTC, trifluralin, dimethenamid, andS-metolachlor applied PPI resulted in minimal (less than 5%) visual injury and with exception of the low rate of dimethenamid causing a 16% reduction in shoot dry weight and the high rate causing an 8% plant height reduction had no adverse effect on plant height, shoot dry weight, seed moisture content, and yield. Imazethapyr applied PPI caused up to 7% visual injury and reduced plant height, shoot dry weight, and yield 8, 18, and 12% at 75 g/ha and 19, 38, and 27% at 150 g/ ha, respectively. Seed moisture content was also reduced by 0.4% with both rates. Based on these results, otebo bean is not tolerant of imazethapyr applied PPI at rates as low as 75 g/ha, the proposed use rate. EPTC, trifluralin, dimethenamid, andS-metolachlor applied PPI have a 2× rate crop safety margin for use in otebo bean weed management.

scholarly journals Effect of Seed Moisture Content and Storage Container on Seed Viability and Vigour of Soybean

2018 ◽  
Vol 21 (1) ◽  
pp. 131-141
Author(s):  
MR Ali ◽  
MM Rahman ◽  
MA Wadud ◽  
AHF Fahim ◽  
MS Nahar
Keyword(s):  
Moisture Content ◽  
Dry Matter ◽  
Agricultural Research ◽  
Seed Viability ◽  
Soybean Seed ◽  
Seed Moisture Content ◽  
Storage Container ◽  
Seed Moisture ◽  
Storage Containers ◽  
Initial Seed

Soybean (Glycine max) seed loses its viability in the storage which causes shortage in supply of quality seed and consequently hinders the expansion of soybean cultivation in Bangladesh.Losses of seed viability of soybean (Glycine max) in traditional storage is very common in the tropical environment. An experiment was conducted at the Seed Laboratory, Regional Agricultural Research Station, Bangladesh Agricultural Research Institute (BARI), Jamalpur in 2011 and 2012 to find out the effect of seed moisture content and types of storage container on soybean seed germination and seedling vigour. In 2011, soybean seed having 94% initial germination was stored at 8, 10 and 12% moisture levels but in 2012 seeds having 96% initial germination was stored at 6, 8, 10 and 12% initial moisture levels in four different types of storage containers viz., polythene bag, plastic pot, tin can and glass jar. weredays after storage ().The experiment was arranged in a factorial completely randomized design with three replications. In 2011, high germination of soybean seed (77-85%) was retained at 200 DAS for those stored at 8% initial seed moisture content (SMC) in any of the containers. Germination index and seedling dry matter decreased with increased initial seed moisture content irrespective of storage containers used. Tin preserved higher seed moisture contents of 9.93, 11.71 and 14.15% for seed stored at 8%, 10% and 12% initial seed moisture content, respectively. In 2012, 80-94% seed germination was retained at 200 DAS for those stored at 6% initial SMC in any of the containers. The germination declined to a range between 75.0 and 91.3% within 200 DAS at 8% initial SMC while those stored at 12% SMC showed rapid germination loss and the value showed down to between 9.3 and 22.0%. Vigour index and seedling dry matter decreased with increased initial seed moisture content irrespective of storage containers used. Tin also Seeds stored in tin container showed the higher final seed moisture contents irrespective of initial seed moisture content. Bangladesh Agron. J. 2018, 21(1): 131-141

Onset of germinability, desiccation tolerance and hardseededness in developing seeds of Peltophorum pterocarpum (DC) K. Heyne (Caesalpinioideae)

2003 ◽  
Vol 13 (4) ◽  
pp. 323-327 ◽  
Author(s):  
T. Mai-Hong ◽  
T.D. Hong ◽  
N.T. Hien ◽  
R.H. Ellis
Keyword(s):  
Moisture Content ◽  
Seed Mass ◽  
Dry Weight ◽  
Tree Legume ◽  
Seed Moisture Content ◽  
Hard Seed ◽  
Seed Moisture ◽  
Seed Population ◽  
Dry Conditions ◽  
Filling Phase

In the hot and dry conditions in which seeds of the tree legume Peltophorum pterocarpum develop and mature in Vietnam, seed moisture content declined rapidly on the mother plant from 87% at 42 d after flowering (DAF) to 15% at 70 DAF. Dry weight of the pods attained a maximum value at about 42 DAF, but seed mass maturity (i.e. the end of the seed-filling phase) occurred at about 62 DAF, at which time seed moisture content was about 45–48%. The onset of the ability of freshly collected seeds to germinate (in 63-d tests at 28–34°C) occurred at 42 DAF, i.e. about 20 d before mass maturity. Full germination (98%) was attained at 70 DAF, i.e. at about 8 d after mass maturity. Thereafter, germination of fresh seeds declined, due to the imposition of a hard seed coat. Tolerance of desiccation to 10% moisture content was first detected at 56 DAF and was complete within the seed population by 84 DAF, i.e. about 22 d after mass maturity. Hardseededness began to be induced when seeds were dried to about 15% moisture content and below, with a negative logarithmic relation between hardseededness and moisture content below this value.

Tolerance of White Beans to Postemergence Broadleaf Herbicides

2004 ◽  
Vol 18 (4) ◽  
pp. 893-901 ◽  
Author(s):  
Peter H. Sikkema ◽  
Nader Soltani ◽  
Christy Shropshire ◽  
Todd Cowan
Keyword(s):  
Moisture Content ◽  
Plant Height ◽  
Weed Control ◽  
Dry Weight ◽  
Seed Moisture Content ◽  
Shoot Dry Weight ◽  
Seed Moisture ◽  
White Bean

Weed control in white beans is currently limited by the small number of registered herbicides. The tolerance of two white bean cultivars, ‘AC Compass’ and ‘OAC Thunder’, to various postemergence (POST) herbicides at the maximum use rate and twice the maximum use rate for soybean or corn was evaluated at two Ontario locations in 2001 and 2002. Generally, the two cultivars did not differ in their response to the POST herbicides. POST applications of imazamox plus fomesafen, imazamox plus bentazon, and cloransulam-methyl decreased plant height, shoot dry weight, and yield by as much as 29, 41, and 55%, respectively, and increased seed moisture content up to 3.9%. POST applications of thifensulfuron, chlorimuron, and bromoxynil decreased plant height as much as 57%, shoot dry weight by up to 71%, yield as much as 93% and increased seed moisture content up to 15.5%. Based on these results, AC Compass and OAC Thunder white beans do not possess sufficient tolerance to support the registration of imazamox plus bentazon, imazamox plus fomesafen, cloransulam-methyl, thifensulfuron, chlorimuron, and bromoxynil.

scholarly journals Potensi Produksi dan Mutu Benih serta Produksi Biomassa Sorghum bicolor Varietas Samurai 2 pada Umur Panen Berbeda sebagai Bahan Pakan

2021 ◽  
Vol 19 (3) ◽  
pp. 78-84
Author(s):  
A Najam ◽  
L Abdullah ◽  
Panca dewi manu hara Karti ◽  
S Hoeman
Keyword(s):  
Sorghum Bicolor ◽  
Seed Production ◽  
Biomass Production ◽  
Dry Matter ◽  
Seed Viability ◽  
Dry Weight ◽  
Shoot Biomass ◽  
Seed Moisture Content ◽  
Seed Moisture ◽  
Panicle Weight

Sorghum bicolor var. Samurai 2 can be used as raw material in silage production for ruminant feed. The problem encountered is the difficulty of obtaining certified seeds for commercial sorghum production. So that is necessary to do this research to investigate potential sorghum seed production and its quality of Sorghum bicolor var. Samurai 2. The study was conducted at University Research Station-Jonggol Animal Education and Research Unit, Bogor Agricultural University. The experimental design used was a randomized block design with 4 treatments and 5 replicates. Five individual plants were taken to measure the variables at each treatment set. The treatments consisted of different harvesting times, namely P95 (harvested 95 days after planting), P100, P105 and P110. The variables observed were dry weight of shelled seeds, seed weight per panicle, weight of panicle stalk, panicle weight, seed production per ha, seed moisture content, seed viability test, and shoot biomass production per ha. The results showed that seed production per ha, panicle dry matter weight, fresh seed moisture content, panicle stalk dry weight was not significantly different. Dry weight of shelled seeds, dry weight of seeds per panicle, panicle dry weight, seed viability, weight of biomass per ha were significantly different (p<0.05). The potential for the production of shelled seeds, dry matter of seeds per panicle was the best in the P105 and P110, the viability of the seeds in the P105 and shoot biomass production per ha in the P105. The potential for shelled seed production (4038 kg ha-1), seed dry weight per panicle (54.87 g panicle-1), seed viability (92.8%) and the best biomass production (55.88 tons ha-1) were in treatment P105. Key words:        seed production, shoot biomass, Sorghum bicolor, viability

scholarly journals Determination of the moisture content of white and yellow corn from ohaji in imo state of nigeria using the dry-weight technique

2018 ◽  
Author(s):  
Offurum Julius Chigozie ◽  
C.M. Morgan
Keyword(s):  
Moisture Content ◽  
Dry Weight ◽  
Mean Value ◽  
Seed Moisture Content ◽  
Imo State ◽  
Yellow Corn ◽  
Seed Moisture ◽  
The Mean ◽  
High Constant Temperature

The water content determination of two maize species (Yellow corn- and White corn- ) located at Ohaji in Imo State of Nigeria were  considered in this study. This was motivated by the regular reported cases of the seed post-harvest spoilages, especially in the local communities. And the moisture content of a particular seed could vary according to the various location of crop, presumably due to the soil texture. The moisture content of a given crop seed can influence its storage value, as well as its choice of selection during manufacturing processes. It was, thus, necessary to determine the moisture content of the two maize species (white and yellow corn) from Ohaji in Imo State of Nigeria, in order to identify their dispositions, especially during storage. Modified High Constant Temperature Oven method, as prescribed by the International Seed Testing Association (which involves preliminary pre-drying and grinding), was employed, at a temperature of 102oC. This involved the use of dry-weight technique, which is expressed as a percentage of the dry weight of the seeds. The procedure for each sampling was replicated accordingly, and the mean value identified as the actual result. The moisture content for Sample A (white corn) was found to be 31.7%, while that of Sample B (yellow corn) was found to be 21.5%, which shows that the yellow corn would always have longer storage value than the white corn. As any change in the seed moisture content has a way of affecting its storage life, it is advisable not to store the white corn longer than it could be applied in the yellow corn for a better storage value.Keywords: Determination, Moisture Content, White Corn, Yellow Corn, Dry-weight Basis

Sign in / Sign up

Export Citation Format

Share Document