PROSPECTS OF HONEY PRODUCTION AND ITS USE IN FOOD TECHNOLOGY

Author(s):  
М.В. СЕМЧЕНКО ◽  
Л.С. ЖУНЕВА ◽  
И.С. МИЛЕНТЬЕВА

Рассмотрены инновационные технологии продуктов на основе меда. Установлено, что мед как сырье достаточно востребован в пищевой промышленности, а разработка новых технологий с использованием этого ценного продукта требует увеличения объема его производства. Проанализированы динамика производства меда в Российской Федерации в 2007–2017 гг., объемы экспорта и импорта меда в нашей стране за период 2014–2018 гг., а также указаны основные проблемы пчеловодства как одной из важнейшей отрасли сельского хозяйства, поставляющей ценное сырье для пищевой промышленности. Innovative technologies of products on base of honey were considered. It is established that honey as a raw material is in demand in the food industry, and the development of new technologies with using this valuable product requires an increase of it production. Dynamics of honey production in the Russian Federation in 2007–2017, volumes of export and import of honey in our country for the period 2014–2018 are analyzed, and also the main problems of beekeeping as one of the most important branch of agriculture supplying valuable raw materials for the food industry are specified.

2020 ◽  
Author(s):  
P.A. Kozlov ◽  
A.M. Panshin ◽  
L.I. Leontiev

The increasing demand for zinc and a range of zinc-related metals (for example: lead; indium; tin; cadmium; and copper) in the Russian Federation cannot be satisfied by the existing production plants due to the lack of raw materials. At the same time, ferrous and non-ferrous metallurgy and the chemical industry have accumulated hundreds of millions of tons of zinc wastes (falling into the hazard categories 2 to 4), the processing of which could not only make up the raw material base, but also improve the environmental situation. In the world, over 85% of ferrous dust is recycled using the Waelz process. The Waeltz process is used for distilling separation of elements under reducing conditions. In this study, a block diagram for production of the following elements from industrial wastes is proposed: zinc, cadmium and indium in form of massive metals; zinc and indium in the form of fine powders; and clinker as a raw material for cement production. The technical and scientific details of this new process have been patented in the Russian Federation and abroad. For the first time, the following operations have been implemented with the use of large-sized Waelz kilns: vapour-oxidized Waeltz treatment of polymetallic wastes; recycling of heat from gases and solid products with generation of process fumes; and implementation of alternative flux (dolomite) and alternative fuel (petroleum coke). Keywords: Waelz process, industrial wastes, heat recycling, vapour-oxidized Waelz processing


Author(s):  
Yu. V. Lykholat ◽  
N. O. Khromykh ◽  
T. Yu. Lykholat ◽  
M. I. Nedzvetska ◽  
O. A. Lykholat ◽  
...  

The introduction of fruit plants into a culture enriches the diversity of the species composition of the regional flora and at the same time creates an opportunity for expansion of the plant raw material base for the needs of the food industry, inclusion in a full-fledged functional nutrition of the population. Among the fruit plants of the Dniprovsk region, every year, more attention should be paid to introduced low-frequency non-traditional fruit species, in which the fruits, leaves, stems and other parts have high nutritional value and are the source of physiologically active compounds that have anti-cancer, antibacterial and anti-inflammatory properties, carry cardio protective, antihypertensive, anti-diabetic effects, stimulate the central nervous system, etc., and can contribute to the prevention and treatment of many diseases.   Antioxidants additives in the raw materials and finished products ensures their prevention damage, reduce losses, increase shelf life and production of high quality products which keep for a long time characteristics inherent fresh, complete products. Preservation, restoration and introduction to the culture of any species depends primarily on its ability to multiply seed and vegetative methods. A comparative analysis of the fruit and seed ability of Berberis L. representatives grown in the botanical garden of Oles Gonchar’  Dniprovsky National University was carried out. The use of integrated research methods made it possible to carry out an integrated assessment of the regenerative capacity of the investigated representatives of the Berberis L. and to establish their biological ability to seed propagation depending on the seed quality of the seeds. The seeds length varied from 4.5 mm (B. canadensis) to 5.2 mm (B. declinata, B. amurensis), width was from 1.8 mm (B. amurensis, B. vulgares) to 2.1 mm ( B. coreana). The weight of 1000 seeds, which, depending on their size and completeness, amounted to an average of 10.16 grams. Largest weight 1000 pcs. seed is marked in B. coreana. As a result of the total antioxidant ability of the fruits, the species examined can be arranged in the following order:  B. koreana > B. x declinata > B. vulgaris > B. amurensis > B. canadensis. When comparing total antioxidant capacity level of the plants, the highest indices were characteristic for B. koreana and B. x declinata fruits, which exceeded the values of other species in 1.7-1.9 times. The relatively low antioxidants concentration in B. amurensis fruits is offset by a greater weight of the fruits of this species.  In order to enrich the range of ornamental and fruit plants, it is expedient to introduce into production of new crops and to expand the species diversity of Berberis L. representatives. Barberry reproduction process depends on many factors related to the environment. All investigated representatives of the Berberis L. are promising for further use in the planting system and as fruit plants that can be included in the functional nutrition of the population and use in the food industry in the conditions of the Steppe Prydniprovya.


2020 ◽  
Vol 19 (5-6) ◽  
pp. 155-159
Author(s):  
Ksenia N. Semenyuta ◽  
Anna A. Shmygareva ◽  
Anatoly N. Sankov

Introduction. The aim of the study is to perform the anatomical and histological analysis of the roots of Rheum palmatum L. and Rheum officinale B., and also to check histochemical reactions for the presence of anthracene derivatives. Material and methods. The methodological basis of the anatomical and histological studies was the standard method for the preparation of micro-preparations of roots of Rheum palmatum L. and Rheum officinale B. described in the State Pharmacopoeia of the Russian Federation, XIV edition (OFS.1.5.3.003.15). Results and discussion. Anatomical and histological studies of Rheum palmatum L. and Rheum officinale B. raw materials confirmed the roots of Rheum palmatum L. to have classical secondary structure, while the roots of Rheum officinale B. have classical primary structure. The histochemical reaction to anthracene derivatives with 10% alkali solution was carried out, it resulted in cherry-red staining of core rays and some structures of cortical parenchyma of the fragment of Rheum palmatum L., while the roots of Rheum officinale B. failed to stain. Conclusions. The anatomical and histological studies of the rhizomes and roots of Rheum palmatum L. and Rheum officinale B. demonstrate the difference in the structure of closely related species of plants. It makes possible to identify the medicinal raw material of these plants.


2021 ◽  
pp. 64-71
Author(s):  
Nadezhda V. Nesterova ◽  
Albina Dosaeva

In this article, the authors conducted a macro-diagnostic study of pear fruits of three varieties. A qualitative analysis of raw materials was carried out using color reactions, thin-layer chromatography in pear fruits most widely cultivated in the territory of the Russian Federation. Arbutin was identified in the raw material, which allows us to consider this type of raw material as a promising alternative to lingonberry and bearberry leaves used in official medicine and actualizes further research aimed at developing modern methods of standardization with subsequent inclusion in the developed regulatory documentation.


2020 ◽  
Vol 839 ◽  
pp. 184-188
Author(s):  
Victoria A. Gurieva ◽  
Anastasia A. Ilyina

The paper considers the existing problems of the production of ceramic products in the territory of the Russian Federation, presents the priority directions of development of this industry. The study includes the determination of the properties of samples based on the raw material base of the Orenburg region, namely, waste generated during the development of brown coal from the Tyulgansk deposit - white and red clays and nickel slag of OJSC Yuzhuralnickel Combine of the Orenburg region. The study presents data from the study of the technological properties of the raw materials, the development of the composition of the ceramic mixture. The influence of the material composition of the clay / slag mixture on the physic mechanical characteristics of the products of the experimental compositions was determined: compressive strength, fire shrinkage, water absorption and density.


2019 ◽  
Vol 13 (3) ◽  
pp. 433
Author(s):  
Fahrur Rozi ◽  
Quartina Pudjiastuti

Potential and opportunities for cassava development are still very broad along with development of companies in livestock, processed food, and other industries. Added value of cassava commodities resulting from development of downstream industries (processed products) is far higher than upstream industries (primary products), so that development paradigm in agriculture sector in future should be directed towards product expansion including its waste. This study aims to examine the economic value of cassava as a future crop from direct as well as by-products and their development strategies. Data was collected from small-scale tapioca flour farmers, ranchers and entrepreneurs. SWOT analysis was used to determine relevant development strategies. Analysis shows that cassava has an potential, especially as a raw material for food and feed industry. In short term, developing cassava strategy as an industrial raw material is to use new technologies i.e. varieties and cultivation techniques for planting arrangements. Cassava potential economic value is relatively high in terms of farming aspects, food raw materials, feed and industry. This potential, apart from main product, is also by-product that has been neglected at 29.7% of cassava main value. By-products potensial has not been used optimally and a bioeconomic value of biomass that can support integrated agriculture in the future.


2021 ◽  
Author(s):  
S.K. Mustafin ◽  
◽  
A.V. Rasskazov ◽  
◽  

The state and prospects of development of phosphorite ore resources as agrochemical raw materials of the Russian Federation are analyzed. The geological structure, composition of ores and the prospects for forecasting, assessing and integrated development of phosphorite deposits of the South Ural phosphorite basin are characterized.


2018 ◽  
Author(s):  
Sh.V. Gasparyan ◽  
S.A. Maslovskii

Приоритет Стратегии развития пищевой и перерабатывающей промышленности Российской Федерации до 2020 года – обеспечение населения страны безопасным и качественным продовольствием. Сырьевая база овощеперерабатывающей промышленности – основа производства. Как инвесторы, так и государство предпринимают конкретные меры для решения проблем. Вместе с тем, несмотря на динамику улучшения, многие проблемы остаются нерешенными. Темпы роста производства овощного сырья недостаточны для промышленности и сдерживают рост производства из отечественного сырья. Это объясняет высокий уровень импорта.The priority of the Strategy of development of the food and processing industry of the Russian Federation until 2020 is to provide the population with safe and quality food. The raw material base of the vegetable processing industry is the basis of production. Both investors and the state are taking concrete measures to solve the problems. However, despite the momentum for improvement, many challenges remain. The growth rate of vegetable raw materials production is not enough for the industry and hinders the growth of production from domestic raw materials. This explains the high level of imports.


Author(s):  
О.Я. МЕЗЕНОВА ◽  
А. ХЕЛИНГ ◽  
Т. МЕРЗЕЛЬ

Показано, что вторичное рыбное сырье (ВРС) является источником полноценных пептидов, жиров, богатых полиненасыщенными жирными кислотами, ценных минеральных веществ – кальция, фосфора, магния, серы, калия, натрия. Использование биопотенциала данного сырья рационально путем его молекулярного разделения на фракции – белковую, липидную и минерально-белковую. Рассмотрена инновационная технология переработки ВРС – его гидротермальная обработка под давлением с предварительным ферментированием или без него. Представлены аминокислотные составы белков продуктов, полученных из чешуи сардины и голов нерки. Показаны преимущества переработка ВРС по новой технологии. Дан обзор разработанных на основе новой технологии биопродуктов для школьников и студентов, спортивного и геродиетического питания. It is shown that secondary fish raw materials (SFRM) is a source of complete peptides, fats, rich in polyunsaturated fatty acids, valuable minerals – calcium, phosphorus, magnesium, sulfur, potassium, sodium. The using the action potential of the raw material is rationally by molecular separation into fractions of protein, lipid and mineral-protein. Innovative processing technology VRS – its hydrothermal treatment under pressure with a pre-fermentation or without it was considered. The amino acid compositions of protein products derived from the scales of sardines and heads of salmon were presented. The benefits SFRM of processing for new technology are shown. Overview developed on the basis of new technologies of bio-products for pupils and students, sports and elderly persons nutrition is given.


Molecules ◽  
2020 ◽  
Vol 25 (3) ◽  
pp. 494 ◽  
Author(s):  
Robert Gál ◽  
Pavel Mokrejš ◽  
Petr Mrázek ◽  
Jana Pavlačková ◽  
Dagmar Janáčová ◽  
...  

Every year, the poultry industry produces a large number of by-products such as chicken heads containing a considerable proportion of proteins, particularly collagen. To prepare gelatin is one of the possibilities to advantageously utilize these by-products as raw materials. The aim of the paper was to process chicken heads into gelatins. An innovative method for conditioning starting raw material was using the proteolytic enzyme. Three technological factors influencing the yield and properties of extracted gelatins were monitored including the amount of enzyme used in the conditioning of the raw material (0.4% and 1.6%), the time of the conditioning (18 and 48 h), and the first gelatin extraction time (1 and 4 h). The gelatin yield was between 20% and 36%. The gelatin gel strength ranged from 113 to 355 Bloom. The viscosity of the gelatin solution was determined between 1.4 and 9.5 mPa.s. The content of inorganic solids varied from 2.3% to 3.9% and the melting point of the gelatin gel was recorded between 34.5 and 42.2 °C. This study has shown that gelatin obtained from chicken heads has a promising potential with diverse possible applications in the food industry, pharmacy, and cosmetics.


Sign in / Sign up

Export Citation Format

Share Document