scholarly journals SOIL STABILIZATION AND IMPROVEMENT OF MARINE CLAYS USING CEMENT AND LIME IN A MARSHLAND

2020 ◽  
Vol 4 (1) ◽  
pp. 08-14
Author(s):  
Youdeowei, P.O. ◽  
Nwankwoala, H.O. ◽  
Ayibanimiworio, G.T
Keyword(s):  
Soil Stabilization ◽  
Clay Soil ◽  
Soft Clay ◽  
Dry Density ◽  
Sieve Analysis ◽  
Marine Clay ◽  
Maximum Dry Density ◽  
Group A ◽  
Marine Clays ◽  
By Products

This study assesses the stabilization of marine clay soil using cement and lime to improve on the subgrade material. The tests conducted include: the natural moisture content, specific gravity, sieve analysis, Atterberg limit, compaction and California Bearing Ratio (CBR). The types of stabilization used were mechanical and chemical. The results obtained were classified using AASHTO classification system and based on the results the soil corresponds to group A-6 soils. The highest CBR values of 33.24% and 424.35% were obtained at 20% cement content for unsoaked and soaked and for lime the highest CBR values were 5.07 and 10.46 for 11% lime content for both unsoaked and unsoaked. Based on the results obtained, the addition of cement and lime to clay soil in the presence of water improved the CBR values for soft clay stabilization for highway construction with low traffic volume. It is therefore concluded that the addition of cement and lime to clay soil improved the bearing capacity and the maximum dry density of the clay soil. Further research should be carried out to examine the effects of industrial by-products on effective clay soil stabilization.

scholarly journals Compaction and Plasticity Comparative Behaviour of Soft Clay Treated with Coarse and Fine Sizes of Ceramic Tiles

2018 ◽  
Vol 34 ◽  
pp. 01012 ◽  
Author(s):  
Mohammed Ali Mohammed Al-Bared ◽  
Aminaton Marto ◽  
Indra Sati Hamonangan Harahap ◽  
Fauziah Kasim
Keyword(s):  
Soil Stabilization ◽  
Soft Soil ◽  
Soft Clay ◽  
Cost Effective ◽  
Dry Weight ◽  
Dry Density ◽  
Ceramic Tiles ◽  
Marine Clay ◽  
Maximum Dry Density ◽  
Stiff Soil

Recycled blended ceramic tiles (RBT) is a waste material produced from ceramic tile factories and construction activities. RBT is found to be cost effective, sustainable, environmental-friendly and has the potential to be used as an additive in soft soil stabilization. Recent reports show that massive amounts of RBT are dumped into legal or illegal landfills every year consuming very large spaces and creating major environmental problems. On the other hand, dredged marine clay obtained from Nusajaya, Johor, Malaysia has weak physical and engineering characteristics to be considered as unsuitable soft soil that is usually excavated, dumped into landfills and replaced by stiff soil. Hence, this study investigates the suitability of possible uses of RBT to treat marine clay. Laboratory tests included Standard proctor tests and Atterberg limits tests. The plasticity of marine clay was evaluated by adding 10%, 20%, 30% and 40% of 0.3 mm RBT. In addition, the compaction behaviour of treated marine clay was compared by adding two different sizes (0.3 mm and 1.18 mm diameter) of RBT. For both coarse and fine sizes of RBT, 10%, 20%, 30% and 40% of the dry weight of the soft clay were added. The mixture of each combination was examined in order to evaluate the Maximum Dry Density (MDD) and the optimum moisture content (OMC) for the treated soft clay. MDD and OMC for soft untreated samples were 1.59 Mg/m3 and 22%, respectively. Treated samples with 10%, 20%, 30% and 40% of 0.30 mm size RBT resulted in a significant reduction of OMC ranged from 19 to 15% while MDD resulted in increment ranged from 1.69 to 1.77 Mg/m3. In addition, samples treated with 10%, 20%, 30% and 40% of 1.18 mm size RBT resulted in major reduction of OMC ranged from 15 to 13.5% while MDD increased effectively from 1.75 to 1.82 Mg/m3. For all mix designs of soft clay-RBT, MDD was gradually increasing and OMC was sharply reducing with further increments of both sizes of RBT.

scholarly journals THE EFFECT OF UTILIZING SILICA FUME AND EGGSHELL ASH ON THE GEOTECHNICAL PROPERTIES OF SOFT KAOLIN CLAY

2021 ◽  
Vol 84 (1) ◽  
pp. 159-170
Author(s):  
Muhammad Syamsul Imran Zaini ◽  
Muzamir Hasan ◽  
Ling Sin Yie ◽  
Khairil Azman Masri ◽  
Ramadhansyah Putra Jaya ◽  
...  
Keyword(s):  
Construction Industry ◽  
Soil Stabilization ◽  
Clay Soil ◽  
Low Cost ◽  
Soft Clay ◽  
Engineering Properties ◽  
Kaolin Clay ◽  
Dry Density ◽  
Maximum Dry Density ◽  
Negative Environmental Impact

The application of chemical stabilizer in soil stabilization can effectively reduce the negative environmental impact in the construction industry. However, the stabilization of soft clay remains a challenge due to the costly and non-eco-friendly materials such as cement and lime. This research demonstrates the combination of SF and ESA in stabilizing the kaolin soils, based on the basic engineering properties and undrained shear strength (USS). Its effect was studied via the inclusion as cement replacement material in kaolin soil at 2, 4 and 6% (by weight of dry soft kaolin clay soil) of SF and ESA substitutions of 3, 6 and 9% (by weight of dry soft kaolin clay and SF content). The result shows a considerably lower specific gravity (4.9% reduction), reduced plasticity index (PI)(48.4% reduction), decreased maximum dry density (MDD) (5.5% reduction), increased optimum moisture content (OMC)(8.7% increment), and higher USS (68.8%). In conclusion, the combinations of SF and ESA as soil stabilization agents successfully enhance the soil strength of the kaolin opening a route to the low cost and eco-friendly materials in soil stabilization.

Effect of Lime on Compaction, Strength and Consolidation Characteristics of Pontian Marine Clay

2015 ◽  
Vol 72 (3) ◽  
Author(s):  
Siaw Yah Chong ◽  
Khairul Anuar Kassim
Keyword(s):  
Construction Material ◽  
Soft Clay ◽  
Engineering Properties ◽  
Dry Density ◽  
Marine Clay ◽  
Maximum Dry Density ◽  
Stabilization Phase ◽  
Compaction Curve ◽  
Stabilized Soil

Marine clay is a problematic construction material, which is often encountered in Malaysian coastal area. Previous researchers showed that lime stabilization effectively enhanced the engineering properties of clay. For soft clay, both strength and consolidation characteristics are equally important to be fully understood for design purpose. This paper presented the effect of lime on compaction, strength and consolidation characteristics of Pontian marine clay. Compaction, unconfined compression, direct shear, Oedometer and falling head permeability tests were conducted on unstabilized and lime stabilized samples at various ages. Specimens were prepared by compaction method based on 95 percent maximum dry density at the wetter side of compaction curve. It was found that lime successfully increased the strength, stiffness and workability of Pontian marine clay; however, the permeability was reduced. Unconfined compressive strength of stabilized soil was increased by 49 percent at age of 56 days whereas compressibility and permeability was reduced by 48 and 67 percent, respectively. From laboratory tests, phenomenon of inconsistency in engineering characteristics was observed for lime stabilized samples below age of 28 days. This strongly proved that lime stabilized soil underwent modification phase before stabilization phase which provided the long term improvement.

scholarly journals A Comparative Study on Soil Stabilization Relevant to Transport Infrastructure using Bagasse Ash and Stone Dust and Cost Effectiveness

2021 ◽  
Vol 7 (11) ◽  
pp. 1947-1963
Author(s):  
Sudip Basack ◽  
Ghritartha Goswami ◽  
Hadi Khabbaz ◽  
Moses Karakouzian ◽  
Parinita Baruah ◽  
...  
Keyword(s):  
Cost Effectiveness ◽  
Soil Stabilization ◽  
Ground Improvement ◽  
Soft Clay ◽  
Transport Infrastructure ◽  
Future Research ◽  
Dry Density ◽  
Test Results ◽  
Maximum Dry Density ◽  
Stone Dust

Soft ground improvement to provide stable foundations for infrastructure is national priority for most countries. Weak soil may initiate instability to foundations reducing their lifespan, which necessitates the adoption of a suitable soil stabilization method. Amongst various soil stabilization techniques, using appropriate admixtures is quite popular. The present study aims to investigate the suitability of bagasse ash and stone dust as the admixtures for stabilizing soft clay, in terms of compaction and penetration characteristics. The studies were conducted by means of a series of laboratory experimentations with standard Proctor compaction and CBR tests. From the test results it was observed that adding bagasse ash and stone dust significantly upgraded the compaction and penetration properties, specifically the values of optimum moisture content, maximum dry density and CBR. Comparison of test results with available data on similar experiments conducted by other researchers were also performed. Lastly, a study on the cost effectiveness for transport embankment construction with the treated soils, based on local site conditions in the study area of Assam, India, was carried out. The results are analyzed and interpreted, and the relevant conclusions are drawn therefrom. The limitations and recommendations for future research are also included. Doi: 10.28991/cej-2021-03091771 Full Text: PDF

Uplift and Settlement Prediction Model of Marine Clay Soil e Integrated with Polyurethane Foam

2019 ◽  
Vol 9 (1) ◽  
pp. 481-489
Author(s):  
D.C. Lat ◽  
I.B.M. Jais ◽  
N. Ali ◽  
B. Baharom ◽  
N.Z. Mohd Yunus ◽  
...  
Keyword(s):  
Polyurethane Foam ◽  
Clay Soil ◽  
Ground Improvement ◽  
Soft Soil ◽  
Soft Clay ◽  
Effective Thickness ◽  
Marine Clay ◽  
Uplift Pressure ◽  
Pu Foam ◽  
Improvement Method

AbstractPolyurethane (PU) foam is a lightweight material that can be used efficiently as a ground improvement method in solving excessive and differential settlement of soil foundation mainly for infrastructures such as road, highway and parking spaces. The ground improvement method is done by excavation and removal of soft soil at shallow depth and replacement with lightweight PU foam slab. This study is done to simulate the model of marine clay soil integrated with polyurethane foam using finite element method (FEM) PLAXIS 2D for prediction of settlement behavior and uplift effect due to polyurethane foam mitigation method. Model of soft clay foundation stabilized with PU foam slab with variation in thickness and overburden loads were analyzed. Results from FEM exhibited the same trend as the results of the analytical method whereby PU foam has successfully reduced the amount of settlement significantly. With the increase in PU foam thickness, the settlement is reduced, nonetheless the uplift pressure starts to increase beyond the line of effective thickness. PU foam design chart has been produced for practical application in order to adopt the effective thickness of PU foam within tolerable settlement value and uplift pressure with respect to different overburden loads for ground improvement works.

scholarly journals Geotechnical properties of reinforced clayey soil using nylons carry’s bags by products

2018 ◽  
Vol 162 ◽  
pp. 01020 ◽  
Author(s):  
Nahla Salim ◽  
Kawther Al-Soudany ◽  
Nora Jajjawi
Keyword(s):  
Soil Stabilization ◽  
Clayey Soil ◽  
Ground Improvement ◽  
Soft Soil ◽  
Liquid Limit ◽  
Waste Material ◽  
Industrial Wastes ◽  
Dry Density ◽  
Maximum Dry Density ◽  
Replacement Technique

All structures built on soft soil may experience uncontrollable settlement and critical bearing capacity. This may not meet the design requirements for the geotechnical engineer. Soil stabilization is the change of these undesirable properties in order to meet the requirements. Traditional methods of stabilizing or through in-situ ground improvement such as compaction or replacement technique is usually costly. Now a safe and economic disposal of industrial wastes and development of economically feasible ground improvement techniques are the important challenges being faced by the engineering community. This work focuses on improving the soft soil brought from Baghdad by utilizing the local waste material for stabilization of soil, such as by using “Nylon carry bag’s by product” with the different percentage and corresponding to 1 %, 3% and 5% (the portion of stabilizer matters to soil net weight) of dried soil. The results indicated that as Nylon’s fiber content increases, the liquid limit decreases while the plastic limit increases, so the plasticity index decreases. Furthermore, the maximum dry density decreases while, the optimum moisture content increases as the Nylon’s fiber percentage increases. The compression index (decreases as the Nylon’s fiber increases and provides a maximum of 43% reduction by adding 5% nylon waste material. In addition, the results indicated that, the undrained shear strength increases as the nylon fiber increases.

scholarly journals Technical and Environmental Impacts of Coal Waste Used as a Soil Stabilizer in Construction Projects of Forest Roads

2021 ◽  
Vol 42 (3) ◽  
Author(s):  
Sara Mansouri ◽  
Mehran Nasiri ◽  
Amir Modarres
Keyword(s):  
Environmental Analysis ◽  
Soil Stabilization ◽  
Liquid Limit ◽  
Soil Conditions ◽  
Coal Waste ◽  
Dry Density ◽  
Maximum Dry Density ◽  
Forest Roads ◽  
Waste Products ◽  
Soil Stabilizer

Many pozzolans are waste products from industrial processes. Every year a huge amount of coal waste is gathered from the coal washing plant in the Hyrcanian forests of Iran. These materials can be used for soil stabilization in construction and maintenance projects of forest roads. This paper aims to (a) investigate the role of coal waste (CW) as a soil stabilizer and (b) determine the changes in soil specification regarding the environmental pollution in different combinations of materials (soil, lime (4 and 6%) and CW (3, 6, 9 and 12%)). For this purpose, different technical and environmental analysis and laboratory tests were performed. Technical tests showed that the soil liquid limit and maximum dry density decreased with an increase in lime and CW contents. Addition of CW could increase the soil CBR, UCS and OMC. According to XRD test, the addition of CW and lime can increase the size of crystals in stabilized soil samples. Environmental analysis showed that the use of stabilizer significantly reduced the concentration of heavy metals such as Cd, Cr and Pb. Also, all of the metal concentrations leached from samples satisfied the required criteria, but the addition of lime and CW increased the concentration of N, P, and K. These changes can increase the invasive species consistent with calcareous soil conditions along the roads. According to the results, the combination of coal waste and lime can be one of the best methods for in situ remediation. It would, however, be better to use a minimum amount of stabilizer in pavement layers of access roads due to environmental sensitivity.

Investigation to some Preliminary Geotechnical Properties of Soft Clay Stabilized by Fly Ash Based Geopolymers

2020 ◽  
Vol 857 ◽  
pp. 259-265
Author(s):  
Jasim M. Abbas ◽  
Amer M Ibrahim ◽  
Abdalla M. Shihab
Keyword(s):  
Fly Ash ◽  
Specific Gravity ◽  
Soft Clay ◽  
Cost Effective ◽  
Geotechnical Properties ◽  
Experimental Program ◽  
Dry Density ◽  
Alkali Activation ◽  
Plastic Behavior ◽  
Maximum Dry Density

The civil engineering projects that includes soft clay within its activities has a serious concern of hazards, such hazards can be overcame by treating the existing soils by certain materials which are named as "stabilizers". The common materials that are highly used in this field are ordinary Portland cement, fly ash, lime and rice husk ash, etc. Each one of these stabilizers has its known shortcomings. The alkali activation of any alumina silicate source produces some kind of cost effective primary binding gel which is known as "Geopolymers". This study is devoted to investigate the role of liquid over fly ash ratio to some soil – FA based Geopolymers geotechnical properties. Such ratio is taken as 2.71, 3.167, 3.8 and 4.75 respectively within the experimental program and the investigated geotechnical properties are the specific gravity, liquid and plastic limit, compaction characteristics and California bearing ratio. The tests results showed that the maximum dry density decreased about 42 % at 2.71 liq/FA whereas this the specific gravity decreased 27 % at the same this ratio. In addition, the 3.8 and 4.75 of such limits revealed no plastic behavior due to the high presence of liquid.

Shear Strength of BC-Soil Admixed with Lime and Bio-Enzyme

2019 ◽  
Vol 969 ◽  
pp. 327-334
Author(s):  
C. Jairaj ◽  
M.T. Prathap Kumar ◽  
H. Muralidhara
Keyword(s):  
Shear Strength ◽  
Soil Stabilization ◽  
Morphological Changes ◽  
Ground Improvement ◽  
High Strength ◽  
Sem Analysis ◽  
Dry Density ◽  
Test Results ◽  
Maximum Dry Density ◽  
Lime Content

This BC Soil are expansive in nature and are problematic because of low shear strength and high compressibility. Review of literatures have proven that addition of lime imparts high strength with a corresponding reduction in swell of BC soils. In addition, Bio-enzymes have also been found to play a key role as activators in improving the characteristics of clayey soils such as BC soil. Development and use of non-traditional ground improvement techniques such as bio-enzymes in combination with lime for soil stabilization helps to reduce the cost and the detrimental effects on the soil environment. In the present study lime and bio-enzymes were used as soil stabilizing agents. Compaction test results on BC soil admixed with different percent of lime indicated that 3% addition lime gives higher maximum dry density of 17kN/m3 with OMC of 21% compare to other addition of lime percentages. Keeping 3% of lime as optimum lime content(OLC), BC Soil was admixed with different dosages of Bio-enzymes 25ml/m3, 50ml/m3, 100 ml/m3,150ml/m3, and 200ml/m3 along with OLC was tested for compaction and unconfined compressive strength(UCC). Further UCC test was carried out for different curing period of 0, 7, 15, 30, and 60 Days to analyse the long term effect of BC soil admixed with bio-enzymes with and without lime content. Morphological and chemical analysis was done by using XRD and SEM analysis, from all the test results it was found that 3%OLC + 75ml/m3 of bio-enzymes for 7 day of curing gives higher UCC of 450 kPa. From the SEM it was found that better bond between particles found to develop in bio-enzyme+ lime admixed BC soil in comparison with lime alone admixed BC soil. XRD studies indicated morphological changes in crystallinity and structure of stabilized BC soil in comparison to BC soil alone.

scholarly journals Sustainable Improvement of Expansive Clays Using Xanthan Gum as a Biopolymer

2019 ◽  
Vol 5 (9) ◽  
pp. 1893-1903 ◽  
Author(s):  
Jayaprakash Reddy Joga ◽  
B.J.S. Varaprasad
Keyword(s):  
Xanthan Gum ◽  
Soil Stabilization ◽  
Expansive Soil ◽  
Dry Density ◽  
Maximum Dry Density ◽  
Direct Shear Tests ◽  
Sustainable Improvement ◽  
Curing Period ◽  
Proctor Test ◽  
Gum Content

In this study, Biopolymers are used as an attempt to create sustainable environment by eliminating the negative environmental impacts of using traditional admixtures in soil stabilization. Xanthan Gum is used as a biopolymer to treat expansive soil. A series of tests like, Standard Proctor Test, Unconfined Compressive Strength (UCS), One-Dimensional Consolidation and Standard Direct Shear tests were conducted on virgin soil and biopolymer (0, 0.5, 1, 1.5, 2, 2.5%) treated soils. The results revels that by addition of biopolymer content Maximum Dry Density (MDD) of soil decreases and Optimum Water Content (OMC) increases. The UCS value is increased by 4 times for the addition of 1% xanthan gum to soil for 28 day curing period. Compressibility of soil is deceased by 65% for 28day curing period. Shear parameters of treated soil shows improvement with addition of xanthan gum content. For further examination, SEM analyses were conducted on the tested samples and revealed that the soil fabric had white lumps and pores in the soil structure were filled with cementitious gel. Moreover, the resistance towards shear and compressibility of treated samples increased with curing times. Therefore, use of Xanthan Gum for soil stabilization is a solution for eco-friendly soil stabilizing material.

Sign in / Sign up

Export Citation Format

Share Document