Durability Determination of the Bearing Structure of an Open Freight Wagon Body Made of Round Pipes during its Transportation on the Railway Ferry

2019 ◽  
Vol 21 (1) ◽  
pp. 28-34
Author(s):  
Oleksij Fomin ◽  
Juraj Gerlici ◽  
Alyona Lovska ◽  
Kateryna Kravchenko ◽  
Pavlo Prokopenko ◽  
...  
Keyword(s):  
Angular Displacement ◽  
Vertical Direction ◽  
Longitudinal Axis ◽  
The Body ◽  
Maximum Acceleration ◽  
Upper Deck ◽  
International Transport ◽  
The Cost ◽  
New Generation

In order to reduce the cost of designing and manufacturing of the new-generation open wagons, it is proposed to construct their carrying systems from round pipes. In order to exploit the proposed designs of wagons in international rail-water communication, it is assumed that they will be equipped with assemblies for fastening of chain binders. The maximal values of accelerations, as components of dynamic load acting on open wagons, made from round pipes during their transportation on a railway ferry, are determined. It is established that when moving the body in the vertical direction for a wagon located on the upper deck, the maximum acceleration value is 0.84g, with angular displacement relative to the transverse axis for the extreme from the anchor point of the wagon body - is 0.1 g, with angular displacement around the longitudinal axis for the extreme from the bulwark of the body of the wagon - is 0.24g. The conducted researches will enable increased efficiency of operation of open wagons through international transport corridors.

The kinematics and performance of escape responses of the knifefish Xenomystus nigri

1993 ◽  
Vol 71 (1) ◽  
pp. 189-195 ◽  
Author(s):  
M. A. Kasapi ◽  
P. Domenici ◽  
R. W. Blake ◽  
D. Harper
Keyword(s):  
High Speed ◽  
Longitudinal Axis ◽  
The Body ◽  
Maximum Acceleration ◽  
Low Speed ◽  
Average Maximum ◽  
Morphological Specialization ◽  
Escape Responses ◽  
And Performance ◽  
Stage 1

The kinematics and performance of the escape responses of the knifefish Xenomystus nigri, a fish specialized for low-speed, undulatory median-fin propulsion, were recorded by means of high-speed cinematography. Two types of escape were observed, one involving the formation of a C-shape along the longitudinal axis of the fish (stage 1), followed by a slow recoil of the body (single bend); the other (double bend) involved stage 1 followed by a contralateral bend (stage 2). The pectoral fins were extended throughout escapes of both types. The average maximum acceleration for double bend escapes was 127.98 m∙s−2; acceleration was usually greatest in stage 1. In double bend escapes, turning angles for stages 1 and 2 were not correlated. Pitch and roll orientations change during escapes. In stage 1, the average roll and average pitch were linearly correlated, suggesting that roll was partly responsible for establishing pitch. Knifefish achieved high maximum acceleration relative to other fish. Therefore, performance was not compromised by morphological specialization for low-speed swimming; however, a negative correlation of pitch with acceleration in stage 1 suggested that escapes involve a trade-off between acceleration and confusing a predator by changing planar orientation.

scholarly journals IOT Based Health Monitoring System

2019 ◽  
pp. 501-504
Author(s):  
Inkollu Gowri Ramya Sri ◽  
Sravani Konduru ◽  
Pravallika Madiraju ◽  
Jetty Bindu Mahitha ◽  
V. Koteswara Rao
Keyword(s):  
Health Care ◽  
The Body ◽  
Transformative Change ◽  
Physical And Mental Health ◽  
Management Options ◽  
Cost Of Health Care ◽  
Practice Of Medicine ◽  
The Individual ◽  
The Cost ◽  
New Generation

Among many applications enabled by the Internet of Things (IoT), smart and connected health care is a particularly important one. Networked sensors, either worn on the body or embedded in our living environments, make possible the gathering of rich information indicative of our physical and mental health. Captured on a continual basis, aggregated, and effectively mined, such information can bring about a positive transformative change in the health care landscape. In particular, the availability of data until now coupled with a new generation of intelligent processing algorithms can: (a) facilitate an evolution in the practice of medicine, from the current post facto diagnose-and treat reactive paradigm, to a proactive framework for prognosis of diseases at an incipient stage, coupled with prevention, cure, and overall management of health instead of disease, (b) enable personalization of treatment and management options targeted particularly to the specific circumstances and needs of the individual, and (c) help reduce the cost of health care while simultaneously improving outcomes. In this paper, we highlight the opportunities and challenges for IOT in realizing this vision of the future of health care.

scholarly journals SOME FEATURES OF DETERMINATION OF THE COST OF PRODUCTS FROM THE DECORATIVE STONE AS OBJECTS OF FORENSIC MERCHANDISING EXAMINATION

2017 ◽  
Vol 17 ◽  
pp. 345-351
Author(s):  
V. M. Hubareva
Keyword(s):  
Initial Data ◽  
Supply And Demand ◽  
Market Value ◽  
The Body ◽  
National Standard ◽  
Comparative Approach ◽  
Basic Commodity ◽  
Value Determination ◽  
The Cost

One of the types ofgoods popular in recent years are the items products by means of which one decorates gardens, parks, buildings of public using, private territories, including houses both outside, and inside as sculptures, figurine, fountains, tile, balusters, fireplaces, landscape sculptures as elements of landscape design. Decorative stones - one of the materials from which these products are made. Unfortunately, in the reference and methodical literature which is used in the expert practice, there are no methodical recommendations on the determination of the cost of goods from a decorative stone. Therefore working out of an algorithm of determination of the cost of such goods for import on the customs territory of Ukraine and their market value will help objectively and reasonably to perform merchandising examinations. At the first stage of carrying out of such researches the expert should receive the certain list of the initial data about the goods. The basic commodity characteristics of the goods from a decorative stone are specified in the conclusion of State Gemmological Centre of Ukraine which should be requested by an expert from the body or the person which appointed examination. Market value of products from a decorative stone can be defined in several ways depending on the presence of the initial data, proposal in the market ofsimilar property, presence of the information on sale of similar products. Cost ofproducts is determined on the basis of the National standard № 1 provisions within the limits of the comparative approach taking into account replacement and supply and demand principles. If the expert doesn’t possess the data necessary for use of the comparative approach then the cost ofproducts can be determined by the calculation method. We offer to use the order of market value determination of the goods on the basis of certain components addition to the cost of the goods for import on the customs territory of Ukraine.

Gender determination of caucasoid hair using image analysis

1993 ◽  
Vol 51 ◽  
pp. 216-217
Author(s):  
T.B. Ball ◽  
W.M. Hess
Keyword(s):  
Image Analysis ◽  
Cross Sections ◽  
Scalp Hair ◽  
The Body ◽  
Equivalent Diameter ◽  
Cross Sectional ◽  
Hair Samples ◽  
Length Width ◽  
Morphological Differences

It has been demonstrated that cross sections of bundles of hair can be effectively studied using image analysis. These studies can help to elucidate morphological differences of hair from one region of the body to another. The purpose of the present investigation was to use image analysis to determine whether morphological differences could be demonstrated between male and female human Caucasian terminal scalp hair.Hair samples were taken from the back of the head from 18 caucasoid males and 13 caucasoid females (Figs. 1-2). Bundles of 50 hairs were processed for cross-sectional examination and then analyzed using Prism Image Analysis software on a Macintosh llci computer. Twenty morphological parameters of size and shape were evaluated for each hair cross-section. The size parameters evaluated were area, convex area, perimeter, convex perimeter, length, breadth, fiber length, width, equivalent diameter, and inscribed radius. The shape parameters considered were formfactor, roundness, convexity, solidity, compactness, aspect ratio, elongation, curl, and fractal dimension.

Mekanisme Dan Proteksi Jaminan Nasabah Pada Gadai Informal

Liquidity ◽  
2017 ◽  
Vol 6 (2) ◽  
pp. 103-109
Author(s):  
Yuri Nanda Larasati ◽  
Jafril Khalil
Keyword(s):  
Qualitative Research ◽  
Research Methods ◽  
Financial Services ◽  
Field Data ◽  
Qualitative Research Methods ◽  
Research Field ◽  
Consumer Society ◽  
Library Research ◽  
The Cost

Regulation of the financial services authority (OJK) No. 31/POJK.05/2016 on Venture had arranged that the financial services agency on the basis of the law of pledge is in coaching and supervision OJK. Yet the existence of laws – invitation to Governing Enterprise pawn shops causing business activities conducted by the above parties are not yet regulated. The condition is feared could cause harm to the consumer society. The purpose of this research is to know the procedures, mechanisms, protection of goods and guarantee the consumer on an informal pledge financing, methods of determination of the cost of maintenance of the goods and the goods of the execution mechanism of the pledge as well as protection for the collateral items are viewed from the side of the consumer by looking at laws-invitations and Sharia. To find out whether the pledge have gotten permission from OJK. This research uses qualitative research methods with the study of library research, field data and simulations. The approach used in this study is the empirical juridical approach. Elaboration upon the results is discussed further in this article.

The Awareness Level of the Safety and Health of the Operational Level

2017 ◽  
Vol 3 (1) ◽  
pp. 42
Author(s):  
Roshanira Che Mohd Noor ◽  
Nur Atiqah Rochin Demong
Keyword(s):  
Health And Safety ◽  
Health Conditions ◽  
Effective Strategies ◽  
Operational Level ◽  
Safety And Health ◽  
Health Factors ◽  
The Cost ◽  
The Relationship ◽  
Awareness Level

Providing a safe and healthy workplace is one of the most effective strategies in for holding down the cost of doing construction business. It was a part of the overall management system to facilitate themanagement of the occupational health and safety risk that are associated with the business of the organization. Factors affected the awareness level inclusive of safety and health conditions, dangerous working area, long wait care and services and lack of emergency communication werethe contributed factors to the awareness level for the operational level. Total of 122 incidents happened at Telekom Malaysia Berhad as compared to year 2015 only 86 cases. Thus, the main objective of this study was to determine the relationship between safety and health factors and the awareness level among operational workers.The determination of this research was to increase the awareness level among the operational level workerswho committing to safety and health environment.

Determination of Lead Content in Red Colored Lipsticks from Mandalay Market by Flame Atomic Absorption Spectrophotometer

2018 ◽  
Vol 30 (3) ◽  
pp. 167-173
Keyword(s):  
Sampling Procedure ◽  
The Body ◽  
Lead Content ◽  
Social Psychological ◽  
Allowable Limit ◽  
Flame Atomic Absorption ◽  
Therapeutic Benefits ◽  
Flame Atomic Absorption Spectrophotometer ◽  
Exposure Levels

Red colored lipstick is the most widely used cosmetic product. Although lipstick gives a lot of social, psychological and therapeutic benefits, it may harm the consumers. Because some lipsticks contain a considerable amount of heavy metal especially lead. Lead is being used in lipstick mainly for the pigments required to obtain needed colors. Lead accumulates in the body over time and lead-containing lipstick applied several times a day, every day, combined with lead in water and other sources, could add up to significant exposure levels. Therefore, this study was aimed to determine lead content in red colored lipsticks from market. This study was laboratorybased, analytical study by using 25 lipstick samples. Red colored lipsticks were bought from Mandalay Market by random sampling procedure and they were completely coded to avoid the bias. Then, lead content in coded samples was determined by Flame AAS according to International Conference on Harmonization (ICH) guideline. Lead contents of 88% of the lipsticks samples were more than specified limit (20 ppm) of Food and Drug Administration, United States. All of them, lead content was highest in counterfeit lipsticks group. Among the tested lipstick samples, lipstick with lowest lead content was LE-RL 01 (15.74 ppm) and the lipstick with highest lead content was CF-RL 01(60.09 ppm). In conclusion, lead contents of red colored lipsticks (22 out of 25) from market samples were higher than allowable limit (20 ppm).

ANALISIS PERHITUNGAN HARGA POKOK PRODUKSI DAN PENENTUAN HARGA JUAL ATAS PRODUK (Studi Kasus Pada PT Dasa Windu Agung)

2016 ◽  
Vol 1 (2) ◽  
pp. 183-190
Author(s):  
Dwi Urip Wardoyo
Keyword(s):  
Manufacturing Industry ◽  
Sampling Method ◽  
Manufacturing Companies ◽  
Test Analysis ◽  
Automotive Components ◽  
Convenience Sampling ◽  
Cost Of Production ◽  
The Cost ◽  
Keywords Cost

This study aims to determine the determination of the cost of production for products produced by PT. DWA. The Company is engaged in the manufacturing industry specialized in automotive components. Its activity is carried out through a series of production processes, so that expenses spent in the production will be calculated into the cost of the production sold. The population in this study were all manufacturing companies in Jakarta. Convenience sampling method selected one of the companies that get the confidence to assemble three national car project in Indonesia, namely Timor, Bakrie and Maleo. Test analysis used in this study is to test the calculation of full costing with job order costing. This study shows that (a) determination of the cost elements associated with the cost of production and (b) determining the cost of production on a product-based job costing with full costing approach. Keywords: cost of production, full costing

Determination of the minimum number of technological bases of a part

2020 ◽  
pp. 73-75
Author(s):  
B.M. Bazrov ◽  
T.M. Gaynutdinov
Keyword(s):  
Cost Price ◽  
Labor Input ◽  
Part Surface ◽  
Technological Base ◽  
Size Accuracy ◽  
Minimum Number ◽  
The Cost ◽  
Input Cost ◽  
Selection Of

The selection of technological bases is considered before the choice of the type of billet and the development of the route of the technological process. A technique is proposed for selecting the minimum number of sets of technological bases according to the criterion of equality in the cost price of manufacturing the part according to the principle of unity and combination of bases at this stage. Keywords: part, surface, coordinating size, accuracy, design and technological base, labor input, cost price. [email protected]

Sign in / Sign up

Export Citation Format

Share Document