scholarly journals Development of Edible Coating from Gelatin Bone Toman Fish (Channa micropeltes) in Frozen Shrimp

2019 ◽  
Vol 2 (1) ◽  
pp. 19
Author(s):  
Evi Fitriyani ◽  
Nani Nuraenah ◽  
Leni Lasmi ◽  
Andri Nofreena
Keyword(s):  
Moisture Content ◽  
Water Content ◽  
Fish Bone ◽  
Ash Content ◽  
Edible Coating ◽  
Cooking Loss ◽  
Low Temperature Storage ◽  
Physical And Chemical Quality ◽  
Frozen Shrimp

<em>This study aims to see the storage time of frozen shrimp by using an edible coating of toman fishbone gelatin (Channa micropeltes) as a water binder that can reduce the deterioration of the quality of frozen shrimp during storage. The method used in this research is the experimental method. This research was carried out in three stages, namely: (1) making gelatin of toman fish bone and edible coating solvent (2) Characteristics of physical properties of toman fishbone gelatin (moisture content, ash content, organoleptic, amendment, water absorption); (3) Application of edible coating made from gelatin on frozen shrimp during low-temperature storage, (4) testing the quality of frozen shrimp with organoleptic parameters, WHC, cooking loss, and yield. The results of the study showed that the quality of the physical and chemical quality of the gelatin from toman fish bone was moisture content about 3.5%, about 3.5% ash content, the water of absorption about 0.00099 g/ml, and yield about 9.45%. Organoleptic results showed that gelatin powder from toman fishbone still met SNI 06-3735-1999 standards that the color of the gelatin produced was colorless to yellowish and the aroma did not smell or taste. The edible coating of frozen shrimp application with gelatin treatment resulted in decreased water content, WHC, cooking loss and organoleptic value from storage day 0 to day 30, whereas frozen shrimp with gelatin treatment resulted in water content, WHC, decreased cooking lost and organoleptic increases from storage day 0 until day 30. The best treatment results in the treatment of G2 (2% gelatin) gave a value of water content of about 33.71-82.99%, the value of WHC about 11.65-82.34%, the value of cooking losses about 2.67-6.14% and the organoleptic value is about 7.0.</em>

scholarly journals Pengaruh Ekstrak Propolis sebagai Edible Coating terhadap Karakteristik Kimia dan Aktifitas Antioksidan Daging Sapi pada Penyimpanan Suhu Ruang

2021 ◽  
Vol 9 (2) ◽  
pp. 72-78
Author(s):  
Andre ◽  
A. Apriantini ◽  
C. Budiman
Keyword(s):  
Moisture Content ◽  
Water Content ◽  
Room Temperature ◽  
Edible Coating ◽  
Chemical Characteristics ◽  
Room Temperature Storage ◽  
Propolis Extract ◽  
Randomized Design ◽  
Temperature Storage

This aim of this study is to determine the effect of using propolis extract as edible coating for beefon chemical characteristics consisting of moisture content, malondialdehyde value and antioxidantactivity at room temperature storage. This research used randomized design with 4 treatments and 3replications. The treatment applied in this study was immersing the meat in propolis extract with differentconcentrations, that are 0.5%, 1.0%, and 1.5% propolis coating. Coating meat with the addition ofpropolis extract was able to have a significant effect at a concentration of 0.5% on water content and theantioxidant activity of coating meat (P <0.05). The addition of propolis extract at various concentrationscan maintain the quality of beef by reducing rancidity during storage. The increasing concentration ofpropolis extract caused the decreasing of MDA value.

scholarly journals VARIAN IKAN NIKE (Awaous melanocephalus) DAN IKAN CAKALANG (Katsuwonus pelamis) TERHADAP MUTU KERUPUK

2018 ◽  
Vol 5 (2) ◽  
pp. 44
Author(s):  
Desi Arisanti
Keyword(s):  
Water Content ◽  
Ash Content ◽  
Nutritional Content ◽  
Katsuwonus Pelamis ◽  
Hedonic Method ◽  
Average Water ◽  
The Mean ◽  
Processed Form ◽  
Current Utilization

the current utilization of nike fish and tuna is still limited to fresh condition. Crackers are a very popular food by all levels of society. Utilization of nike fish and tuna in processed form with longer shelf life has not been done. Nutritional content of both types of fish is a reason in the selection as a basic ingredient in making crackers. The purpose of this research is to know the formulation of nike fish and tuna to the quality of crackers. The observation parameters in this study are the level of favorite or hedonic method, water content, ash content, bloom and texture analizer. The results showed that the average water content of nike fish crackers and skipjack fish from treatment A1 3.3%, treatment A2 3.29%, A3 3.77%. Mean of ash content at treatment of A1 1,97%, treatment of A2 1,55%, treatment of A3 1,58%. The average of A1 is 283,54%, A2 242,75%, A3 182,23%. and the mean of analyzer analyzer test at A1 1185,6%, A2 708,9%, and A3 783,83%. Based on the results and the discussion that has been done on the quality of crackers, it can be concluded that the best formula and liked by the panelists is formula A1

scholarly journals KARAKTERISTIK SIFAT-SIFAT KIMIA DAN ORGANOLEPTIK KUE KERING BERBAHAN DASAR PATI SAGU, UBI KAYU, UBI JALAR DAN KELADI

2016 ◽  
Vol 5 (1) ◽  
pp. 1
Author(s):  
Febby J Polnaya ◽  
Rachel Breemer
Keyword(s):  
Moisture Content ◽  
Water Content ◽  
Sweet Potato ◽  
Sensory Analysis ◽  
Total Protein ◽  
Proximate Composition ◽  
Ash Content ◽  
Crude Fiber ◽  
Brownish Yellow ◽  
Color Texture

The purpose of this research was to characterize chemical and sensory properties (color, texture, taste and liking) of starch-based sago, cassava, sweet potato and cocoyam cookies. Analysis of cookies include moisture content, ash, fat, protein, crude fiber and sensory analysis including color, texture, taste and likeness). The proximate composition indicated that the water content of cookies varied between 1.48 to 2.05%, ash content of 0.65 to 0.72%, 19.23 to 21.76% of fat, crude fiber from 0.41 to 0.71% and 1.33 to 2.42% of total protein. Based on organoleptic tests, the color of cookies was yellow to brownish-yellow, with crispy texture, the taste was sweet and were mostly preferred.

scholarly journals Analysis of the Quality of Mixed Coconut Shell Waste Briquettes with Various Biomass Additives as Alternative Fuels

2021 ◽  
Vol 4 (2) ◽  
Author(s):  
Yusraida Khairani Dalimunthe ◽  
Sugiatmo Kasmungin ◽  
Listiana Satiawati ◽  
Thariq Madani ◽  
Teuku Ananda Rizky
Keyword(s):  
Moisture Content ◽  
Calorific Value ◽  
Volatile Matter ◽  
Matter Content ◽  
Ash Content ◽  
Coconut Shell ◽  
Bamboo Charcoal ◽  
A Value ◽  
Shell Waste

The purpose of this study was to see the best quality of briquettes from the main ingredient of coconut shell waste<br />with various biomass additives to see the calorific value, moisture content, ash content, and volatile matter<br />content of the biomass mixture. Furthermore, further research will be carried out specifically to see the quality of<br />briquettes from a mixture of coconut shell waste and sawdust. The method used in this research is to conduct a<br />literature study of various literature related to briquettes from coconut shell waste mixed with various additives<br />specifically and then look at the best quality briquettes produced from these various pieces of literature. As for<br />what is determined as the control variable of this study is coconut shell waste and as an independent variable,<br />namely coffee skin waste, rice husks, water hyacinth, Bintaro fruit, segon wood sawdust, coconut husk, durian<br />skin, bamboo charcoal, areca nut skin, and leather waste. sago with a certain composition. Furthermore, this<br />paper also describes the stages of making briquettes from coconut shell waste and sawdust for further testing of<br />the calorific value, moisture content, ash content, volatile matter content on a laboratory scale for further<br />research. From various literatures, it was found that the highest calorific value was obtained from a mixture of<br />coconut shell waste and bamboo charcoal with a value of 7110.7288 cal / gr and the lowest calorific value was<br />obtained from a mixture of coconut shell waste and sago shell waste with a value of 114 cal / gr, then for the value<br />The highest water content was obtained from a mixture of coconut shell waste and rice husk with a value of<br />37.70% and the lowest water content value was obtained from a mixture of coconut shell waste 3.80%, then for the<br />highest ash content value was obtained from a mixture of coconut shell waste and coffee skin with a value of<br />20.862% and for the lowest ash content value obtained from a mixture of coconut shell and Bintaro fruit waste,<br />namely 2%, and for the highest volatile matter content value obtained from a mixture of coconut shell and coconut<br />husk waste with a value of 33.45% and for the value of volatile matter levels The lowest was obtained from a<br />mixture of coconut shell waste and sago skin waste with a value of 33 , 45%.

scholarly journals The Characteristic of Calcium Fortified Fish Keropok from Belida Fish Bone

2017 ◽  
Vol 19 (3) ◽  
pp. 233
Author(s):  
Indrati Kusumaningrum ◽  
Andi Noor Asikin
Keyword(s):  
Experimental Design ◽  
Moisture Content ◽  
Protein Content ◽  
Calcium Content ◽  
Fish Bone ◽  
Fat Content ◽  
Ash Content ◽  
Chemical Characteristics ◽  
East Kalimantan ◽  
Calcium Source

Abstract<br />Belida (Chitala sp.) bone is one of the waste from amplang processing which not treated properly<br />yet until now especially in East Kalimantan. One type of the usage of this waste is processed to fish bone<br />powder as calcium source which can be added to various food formulations such as keropok. The aim of<br />this study was to determine the chemical characteristics of belida fishbone powder added keropok Observed<br />parameters in this study were moisture content, ash content, protein content, fat content, calcium content,<br />phosphor content and whiteness. The method applied the experimental design was Completely Randomized<br />Design with five treatments of 0% (K0), 5% (K1), 10% (K2), 15% (K3) dand 20% (K4) fishbone powder<br />addition with three replications to each treatments. The results showed that the addition of belida bone<br />powder hadn’t significant effect to moisture of fortified keropok while had significant effect on ash, protein,<br />fat, calcium, phosphor content and whitness. The higher addition of fishbone powder increasing the value of<br />ash, calcium, phosphor and whiteness but decreasing protein and fat content of fortifief keropok. The result<br />showed that K3 was the best treatment with 5.64% calcium content.<br /><br />

scholarly journals Drying and storage of Eugenia involucrata DC. seeds

2003 ◽  
Vol 60 (3) ◽  
pp. 471-475 ◽  
Author(s):  
Angela Maria Maluf ◽  
Denise Augusta Camargo Bilia ◽  
Claudio José Barbedo
Keyword(s):  
Moisture Content ◽  
Water Content ◽  
Cold Storage ◽  
Native Species ◽  
Plastic Bags ◽  
Physiological Quality ◽  
Drying Rates ◽  
And Storage ◽  
Water Contents

The physiological quality of seeds of native species is important to produce healthy saplings and therefore guarantee the success of programs to recover disturbed vegetation. This reinforces the necessity for investigating the physiological quality of those seeds. To evaluate the effects of different drying rates on the germination, moisture content and storability of Eugenia involucrata diaspores, mature fruits collected at Mogi Guaçu, SP, Brazil had their epi- and mesocarps removed by washing and were dried at 30, 40 or 50ºC until their water content was reduced from 57% (fresh diaspores) to 13% (final drying), totaling six drying levels. In a second experiment, diaspores had their moisture content reduced from 57% to 49%, at 30ºC, totaling six drying levels (0h, 1h, 2h, 3h, 4h and 5h), and were kept for 180 days in plastic bags under cold storage. The drying rate had no effect on tolerance to desiccation by E. involucrata diaspores; water contents lower than 51% decreased both germinability and storability. Diaspores can be stored for up to 180 days as long as their water content is reduced to 53% and they are kept inside plastic bags under cold storage.

scholarly journals GUAR GUM ADDITION ON PHYSICAL CHARACTERISTICS OF EXTRUDED DRY CORN NOODLE FROM MIXTURE OF WET AND DRY CORN FLOURS

2020 ◽  
Vol 11 (1) ◽  
pp. 39
Author(s):  
Aminullah Aminullah ◽  
Tjahja Muhandri ◽  
Subarna Subarna
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Shelf Life ◽  
Guar Gum ◽  
Physical Characteristics ◽  
Cooking Loss ◽  
Drying Process ◽  
Corn Flour ◽  
Physical Quality

The drying process of corn noodles was an effort to increase the shelf life and it was a form of noodles diversification. The objective of this research was to study and analyze the effect of guar gum addition on the physical quality of the extruded dry corn noodle made from a mixture of wet and dry corn flour. Manufacturing dry corn noodles was conducted using wet corn noodles from a mixture of wet and dry corn flour, which was then dried in a tray dryer at a temperature of 60-70 °C for 1 - 1.5 hours. The treatments used were a combination of alum levels of 0.01%; moisture content of 80% (dry base); and guar gum concentration of 0%, 1%, and 2%. Physical properties of dry corn noodles included rehydration time, hardness, adhesiveness, suppleness, elongation, and cooking loss. The results showed that the optimum rehydration time for dry corn noodles was about 9 minutes. The addition of guar gum to the physical qualities of dry corn noodles tended not to be significant statistically, but as a score, an increase in guar gum levels tended to increase the elongation of dry corn noodles. While, increasing levels of guar gum tended to reduce the stickiness and cooking loss levels of them.

scholarly journals ANGKA KAPANG DAN KHAMIR PADA LADA PUTIH ASAL BANGKA

2019 ◽  
Vol 5 (2) ◽  
pp. 101
Author(s):  
Oktavio Rosani ◽  
Devy Susanty ◽  
Ary Triyanto
Keyword(s):  
Moisture Content ◽  
Water Content ◽  
High Water ◽  
Quality Standard ◽  
High Water Content ◽  
White Pepper ◽  
Public Consumption ◽  
Mold And Yeast ◽  
The Relationship

Numbers of Mold and Yeast on White Pepper from BangkaWhite pepper is one of Indonesia's spices that are needed for both public consumption and exports. Post-harvest processing of white pepper by farmers is often done with unclean. Each source of white pepper has different water content and will affect the quality of white pepper. In this study, seven samples (S1, S2, S3, S4, S5, S6, S7) were from Bangka. All samples tested had higher water content than SNI quality standard (13%), but still below the quality standard 2 (18%). Sample S2 has the highest water content compared to other samples. Sample S1 and S2 have high Numbers of Mold and Yeast (AKK) and do not suitable with quality standart of BPOM. Of all samples, S2  had the highest AKK (5,51 x 104 colony / g) and sample S5 had the smallest AKK (8,8 x 102 colony / g). This shows the relationship between water content in white pepper with AKK. White pepper that has a high water content has a high AKK, whereas white pepper that has low moisture content has low AKK.Keywords: white pepper, Numbers of Mold and Yeast, moisture contentABSTRAKLada putih adalah salah satu rempah Indonesia  yang  banyak dibutuhkan baik untuk konsumsi masyarakat ataupun ekspor. Proses pengolahan pasca panen lada putih oleh petani sering dilakukan dengan tidak bersih. Setiap sumber lada putih memiliki kadar air yang berbeda dan akan mempengaruhi kualitas lada putih. Pada penelitian ini,tujuh sampel (S1, S2, S3, S4, S5, S6, S7)  berasal dari Bangka. Semua sampel yang di uji memiliki kadar air yang lebih tinggi dari standar mutu 1 SNI (13%), namun masih berada di bawah standar mutu 2 (18 %). Sampel S2 memiliki kadar air yang paling tinggi dibandingkan dengan sampel lainnya. Sampel S1 dan S2 memiliki  (Angka Kapang Khamir) AKK yang tinggi dan tidak memenuhi syarat mutu. BPOM. Dari semua sampel, sampel S2 memiliki AKK paling tinggi (5,51 x 104 koloni/g) dan sampel S5 memiliki AKK paling kecil (8,8 x 102 koloni/g). Hal ini menunjukan hubungan antara kadar air pada lada putih dengan AKK. Lada putih yang memiliki kadar air tinggi memiliki AKK yang juga tinggi, sedangkan lada putih yang memiliki kadar air rendah memiki AKK yang  rendah.Kata Kunci: Lada putih, Angka kapang khamir, Kadar Air

scholarly journals The Use of Different Deacetylation Temperature Toward Quality of Chitosan Mud Crab Shell (Scylla serrata)

2021 ◽  
Vol 934 (1) ◽  
pp. 012092
Author(s):  
R Karnila ◽  
S Loekman ◽  
S Humairah
Keyword(s):  
Moisture Content ◽  
Ash Content ◽  
Scylla Serrata ◽  
Crab Shell ◽  
Mud Crab ◽  
Degree Of Deacetylation ◽  
Randomized Design ◽  
Chitin And Chitosan ◽  
Two Stages

Abstract This research aims to determine the chemical composition (proximate) of chitosan and chitin, The best deacetylation temperature for obtaining chitosan, and the yield of chitosan and chitin from mud crab. This research was conducted in two stages, that is: 1) Preparation of mud crab flour and 2) Extraction and analysis of chitin and chitosan. The experimental design used for chitosan isolation was Completely Randomized Design (CRD). The process of deacetylation chitin becomes chitosan by using 50% NaOH with varying heating temperatures (120, 130, and 140°C). Parameters observed were yield, moisture content, ash content, and degrees of deacetylation. The result showed that the best chitosan was obtained by chitin deacetylation process into chitosan using a temperature of 130°C (KO2). Characteristics quality of the chitosan mud crab shell produced are KO1: yield 61.00%, moisture content 6.47%, ash content 17.18% (db), and degree of deacetylation 49.63%. KO2: yield 59.94%, moisture content 6.48%, ash content 14.85% (db) with degree of deacetylation 51.13%. KO3: yield 53,97, moisture content 6.54%, ash content 14.66% (db) and degree of deacetylation 52.63%. Characteristic quality of chitin included yield was 27.81%, moisture content 7.29%, ash 44.05%, and degree of deacetylation 33.09%.

scholarly journals Pengolahan Sampah Organik dan Limbah Biomassa dengan Teknologi Olah Sampah di Sumbernya

2021 ◽  
Vol 6 (3) ◽  
Author(s):  
I Made Indradjaja M. Brunner ◽  
Arief Norhidayat ◽  
Satria M. Brunner
Keyword(s):  
Moisture Content ◽  
Water Content ◽  
Early Stage ◽  
Calorific Value ◽  
Ash Content ◽  
Waste Processing ◽  
Biomass Waste ◽  
Aerobic Activity ◽  
Three Stages ◽  
Biomass Pellet

Solid Waste Processing Technology at the Source (TOSS) is an alternative method in processing organic and biomass waste on a communal scale. The processing of organic and biomass waste material is carried out in three stages of the process: biodrying which utilizes the aerobic activity of microorganisms; chopping which is intended to refine the material, and pelletization to compact the material into biomass pellets. The biodrying process in bamboo boxes is able to reduce the water content in organic and biomass waste within 4-5 days. Sorting of non-organic materials can be done at an early stage before or after the biodrying process. Sorting is required before chopping and pelletizing process to avoid unnecessary machine break down. The biomass pellet which is the final product has a diameter of about 10 mm with a length between 10-40 mm, a calorific value between 3000-4000 kcal/kg, and a moisture content of up to 15%. Compared to coal, biomass pellets tend to have higher volatile and ash content, while lower ash and sulfur content.

Sign in / Sign up

Export Citation Format

Share Document