Successful Moveable Bridges

2019 ◽  
Author(s):  
Kjeld Thomsen ◽  
Christian Riis Petersen
Keyword(s):  
Operation Time ◽  
Cost Effective ◽  
Modern Technology ◽  
Point Of View ◽  
Maintenance Cost ◽  
Hydraulic Systems ◽  
Design Concepts ◽  
Electrical Systems ◽  
Low Weight ◽  
Selection Of

<p>The present paper describes developments in the design of the most common types of movable bridges – Bascule bridges and Swing Bridges. The selection of design concepts is influenced by span, foundation conditions as well as environmental issues. Application of modern hydraulic systems and innovative bearing types for swing bridges facilitate the creation of outstanding designs. Recently built moveable bridges in Denmark exemplifies the trend and how application of modern technology and creativity can lead to outstanding solutions. There are many governing parameters such as the span, free opening height and loading conditions. Equally important issues such as surroundings, landscape, foundation conditions, requirement to low weight, achievable tolerances and from a mechanical point of view, the operation time. Risk assessment, mechanical- and electrical systems and the requirement to operation time and maintenance cost, will have influence on the selection of machinery and the architectural and structural design. For each of the moveable bridges described, it is shown how innovative application of modern bearing concepts and hydraulic systems can lead to elegant and cost-effective solutions.</p>

ASSESSMENT OF ECONOMIC EFFICIENCY AT THE DESIGN STAGES OF FLEXIBLE MANUFACTURE SYSTEMS

2021 ◽  
pp. 26-32
Author(s):  
J. F. Mammadov ◽  
G. S. Abdullayev ◽  
I. L. Korshunov ◽  
I. R. Aliyev
Keyword(s):  
Economic Efficiency ◽  
Hydraulic System ◽  
High Performance ◽  
Cost Effective ◽  
Correct Choice ◽  
Point Of View ◽  
Active Elements ◽  
Economic Justification ◽  
Flexible Manufacture ◽  
Selection Of

Based on the analysis of economic and technical indicators of the efficiency of the flexible manufacture system (FMS), the criteria for choosing a cost-effective project of the hydraulic system were determined, taking into account the minimization of automated technical systems, technological equipment and increasing the productivity of the designed enterprise. The ranking method is used to decide the correct choice of the most effective FMS project. An algorithm is proposed to substantiate economic efficiency by minimizing the costs of the selected active elements and increasing the productivity of the investigated production. On the basis of a sequential, parallel and parallel-circular layout diagram of the production modules of the FMS, a study is carried out on their choice and economic justification. To determine specific comparative economic indicators from the point of view of minimizing the number of active elements and their temporal indicators of technological operations, an algorithm for choosing a layout diagram of a FMS production module is proposed. The developed algorithm makes it possible to evaluate the economic efficiency taking into account the number of active elements, their types and types of technological operations. The process of selection of the parallel-circular layout scheme of FMS depending on the number of finished products has been substantiated which ensures high performance of the parallel-circular layout scheme of FMS.

Heathens in the chapel? Economics and the conservation of native biodiversity

2004 ◽  
Vol 10 (2) ◽  
pp. 88 ◽  
Author(s):  
David J. Pannell
Keyword(s):  
Biodiversity Conservation ◽  
Large Scale ◽  
Potential Role ◽  
Policy Instruments ◽  
Cost Effective ◽  
Point Of View ◽  
Human Behaviour ◽  
Definition Of ◽  
Non Market Valuation ◽  
Selection Of

Biodiversity conservation is a human endeavour and economic drivers playa key role in shaping human behaviour. This is particularly true of human behaviour in management of businesses (such as farms) and in relation to the resources that underpin businesses (such as land and water). For this reason, the theories and models of economics have a lot to offer people concemed with biodiversity conservation. The paper outlines a number of theories and insights from economics that are relevant to biodiversity, particularly from the point of view of governments wishing to make efficient and cost-effective decisions about investment priorities for biodiversity. There is a need for better definition of biodiversity objectives, and for improved information about cause and effect relationships between interventions and outcomes. The importance of paying adequate attention to the farm-level economics of proposed changes in land management is emphasized. This is an important influence on farmers' responses, particularly if large-scale changes are sought. Non-market valuation studies to place monetary values on biodiversity outcomes have a potential role to play in evaluating policy options, although a measured approach to the use of these techniques seems warranted. There is a discussion about the limited role that economics can play in determining who should pay for biodiversity interventions. The selection of policy approaches and policy instruments for biodiversity needs to be sophisticated, based on science, and sensitive to different biodiversity-related problems and opportunities.

Medical Literature Searches -How Many Bibliographic Databases are Needed for Sufficient Retrieval in Medical Topics?

1985 ◽  
Vol 24 (03) ◽  
pp. 163-165 ◽  
Author(s):  
K. John
Keyword(s):  
Medical Literature ◽  
Cost Effective ◽  
Medical Faculty ◽  
Bibliographic Databases ◽  
Literature Searches ◽  
Selection Of

SummaryAs many bibliographic services in medicine are offered, literature searches in eight databases at DIMDI were performed to find out which database is most important in medicine. The distribution of publications from members of the medical faculty of Frankfurt University was examined. No save prediction is possible as to which database will yield most articles. Overlapping from different databases is often rather low. The selection of an appropriate database mix for sufficient recall and in a cost-effective manner.is a task for an experienced searcher.

Tauchnitz for Translators. The Circulation of English-language Literature in Finland

2019 ◽  
Vol 16 (2-3) ◽  
pp. 161-179
Author(s):  
Outi Paloposki
Keyword(s):  
Foreign Language ◽  
English Language ◽  
Book History ◽  
Language Skills ◽  
Point Of View ◽  
Book Production ◽  
German Publisher ◽  
Language Literature ◽  
Selection Of

The article looks at book production and circulation from the point of view of translators, who, as purchasers and readers of foreign-language books, are an important mediating force in the selection of literature for translation. Taking the German publisher Tauchnitz's series ‘Collection of British Authors’ and its circulation in Finland in the nineteenth and early twentieth century as a case in point, the article argues that the increased availability of English-language books facilitated the acquiring and honing of translators' language skills and gradually diminished the need for indirect translating. Book history and translation studies meet here in an examination of the role of the Collection in Finnish translators' work.

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

Teknologi Esktrasi dan Cara Pemisahannya untuk Mendapatkan Kembali Karotenoid dari Minyak Sawit : Suatu Tinjauan

2016 ◽  
Vol 9 (1) ◽  
pp. 80-95
Author(s):  
Agus Sudibyo ◽  
Sardjono Sardjono
Keyword(s):  
Vitamin A ◽  
Palm Oil ◽  
Beta Carotene ◽  
Cost Effective ◽  
Raw Material ◽  
Extraction And Separation ◽  
Molecular Product ◽  
Industrial Use ◽  
Palm Oil Mill ◽  
Selection Of

Crude palm oil (CPO)is the richest natural plant source of carotenoids in terms of retinol (pro-vitamin A) equivalent, whereas palm oil mill effluent (POME) is generated from palm oil industry that contains oil and carotenes that used to be treated before discharge. Carotenoids are importance in animals and humans for the purpose of the enhancement of immune response, conversion of vitamin A and scavenging of oxygen radicals. This component has different nutritional  functions and benefits to humaan health. The growing interest in the other natural sources of beta-carotene and growing awareness to prevent pollution has stimulated the industrial use of CPO and POME as a raw material for carotenoids extraction. Various technologies of extraction and separation have been developed in order to recover of carotenoids.This article reports on various technologies that have been developed in order to recover of carotenoids from being destroyed in commercial refining of palm oil and effects of some various treatments on the extraction end separation for carotenoid from palm oil and carotenoids concentration. Principally, there are different technologies, and there is one some future which is the use of solvent. Solvent plays important role  in the most technologiest, however the problem of solvents which are used is that they posses potentiaal fire health and environmental hazards. Hence selection of the  most safe, environmentally friendly and cost effective solvent is important to design of alternative extraction methods.Chemical molecular product design is one of the methods that are becoming more popular nowadays for finding solvent with the desired properties prior to experimental testing.ABSTRAKMinyak sawit kasar merupakan sumber karotenoid terkaya yang berasal dari tanaman sawit sebagai senyawa yang sama dengan retinol atau pro-vitamin A; sedangkan limbah pengolahan minyak sawit dihasilkan dari industri pengolahan minyak sawit yang berisi minyak dan karotene yang perlu diberi perlakuan terlebih dahulu sebelum dibuang. Karotenoid merupakan bahan penting yang diperlukan pada hewan dan manusia guna memperkuat tanggapan terhadap kekebalan, konversi ke vitamin A dan penangkapan gugus oksigen radikal. Dengan berkembangnya ketertarikan dalam mencari beta-karotene yang bersumber dari alam lain dan meningkatnya kesadaran untuk mencegah adanya pencemaran lingkungan, maka mendorong suatu industri untuk menggunakan CPO dan POME sebagai bahan baku untuk diekstrak karotenoidnya. Berbagai macam teknologi guna mengekstrak dan memisahkan karotenoid telah dikembangkan untuk mendapatkan kembali karotenoidnya. Makalah ini melaporkan dan membahas berbagai jenis teknologi yang telah dikembangkan guna mendapatkan kembali senyawa karotenoid dari kerusakan di dalam proses pemurnian minyak sawit secara komersial dan pengaruh beberapa perlakuan terhadap ekstrasi dan pemisahan karotenoid dari minyak sawit dan konsentrasi karotenoidnya. Pada prinsipnya, berbagai teknologi yang digunakan untuk mengekstrak dan memisahkan karotenoid terdapat perbedaan, dan terdapat salah satu teknologi yang digunakan untuk esktrasi dan pemisahan karotenoid adalah menggunakan bahan pelarut. Pelarut yang digunakan mempunyai peranan yang penting dalam teknologi ekstrasi; namun pelarut yang digunakan untuk mengekstrak tersebut mempunyai persoalan karena berpotensi mengganggu kesehatan dan membahayakan cemaran lingkungan. Oleh karena itu, pemilihan jenis teknologi yang aman, ramah terhadap lingkungan dan biaya yang efektif untuk penggunaan pelarut merupakan hal penting sebelum dilakukan desain metode/teknologi alternatif untuk esktrasi karotenoid. Pola produk molekuler kimia merupakan salah satu metode yang saat ini menjadi lebih populer untuk mencari pelarut dengan sifat-sifat yang dikehendaki sebelum diujicobakan. Kata kunci :    karotenoid, ekstrasi, pemisahan, teknologi, minyak sawit kasar, limbah industri pengolahan sawit.

Der Sommer und Herbst 2003 aus phänologischer Sicht | Summer and autumn 2003 from a phenological point of view

2004 ◽  
Vol 155 (5) ◽  
pp. 142-145 ◽  
Author(s):  
Claudio Defila
Keyword(s):  
Time Series ◽  
New Record ◽  
Point Of View ◽  
Late Spring ◽  
Mean Deviation ◽  
Leaf Shedding ◽  
The Mean ◽  
Very High ◽  
Selection Of

The record-breaking heatwave of 2003 also had an impact on the vegetation in Switzerland. To examine its influences seven phenological late spring and summer phases were evaluated together with six phases in the autumn from a selection of stations. 30% of the 122 chosen phenological time series in late spring and summer phases set a new record (earliest arrival). The proportion of very early arrivals is very high and the mean deviation from the norm is between 10 and 20 days. The situation was less extreme in autumn, where 20% of the 103 time series chosen set a new record. The majority of the phenological arrivals were found in the class «normal» but the class«very early» is still well represented. The mean precocity lies between five and twenty days. As far as the leaf shedding of the beech is concerned, there was even a slight delay of around six days. The evaluation serves to show that the heatwave of 2003 strongly influenced the phenological events of summer and spring.

Design of Inhibitors for Glyceraldehyde-3-phosphate Dehydrogenase (GAPDH) Enzyme of Leishmania mexicana

2020 ◽  
Vol 16 (6) ◽  
pp. 784-795
Author(s):  
Krisnna M.A. Alves ◽  
Fábio José Bonfim Cardoso ◽  
Kathia M. Honorio ◽  
Fábio A. de Molfetta
Keyword(s):  
Molecular Dynamics ◽  
Molecular Dynamics Simulations ◽  
Binding Site ◽  
Point Of View ◽  
New Drugs ◽  
Leishmania Mexicana ◽  
Receptor Complexes ◽  
Starting Point ◽  
Dynamics Simulations ◽  
Selection Of

Background:: Leishmaniosis is a neglected tropical disease and glyceraldehyde 3- phosphate dehydrogenase (GAPDH) is a key enzyme in the design of new drugs to fight this disease. Objective:: The present study aimed to evaluate potential inhibitors of GAPDH enzyme found in Leishmania mexicana (L. mexicana). Methods: A search for novel antileishmanial molecules was carried out based on similarities from the pharmacophoric point of view related to the binding site of the crystallographic enzyme using the ZINCPharmer server. The molecules selected in this screening were subjected to molecular docking and molecular dynamics simulations. Results:: Consensual analysis of the docking energy values was performed, resulting in the selection of ten compounds. These ligand-receptor complexes were visually inspected in order to analyze the main interactions and subjected to toxicophoric evaluation, culminating in the selection of three compounds, which were subsequently submitted to molecular dynamics simulations. The docking results showed that the selected compounds interacted with GAPDH from L. mexicana, especially by hydrogen bonds with Cys166, Arg249, His194, Thr167, and Thr226. From the results obtained from molecular dynamics, it was observed that one of the loop regions, corresponding to the residues 195-222, can be related to the fitting of the substrate at the binding site, assisting in the positioning and the molecular recognition via residues responsible for the catalytic activity. Conclusion:: he use of molecular modeling techniques enabled the identification of promising compounds as inhibitors of the GAPDH enzyme from L. mexicana, and the results obtained here can serve as a starting point to design new and more effective compounds than those currently available.

Analysis of the Most Valued Organization to Work for in Spain, According to Nationality and Location

2019 ◽  
Vol 5 (2) ◽  
pp. 83-99
Author(s):  
Francisco Jesús Ferreiro Seoane ◽  
Manuel Octavio Del Campo Villares
Keyword(s):  
Work Environment ◽  
Talent Management ◽  
Point Of View ◽  
Added Value ◽  
Quantitative Character ◽  
Autonomous Communities ◽  
Professional Performance ◽  
Significant Relationships ◽  
Pearson Correlations ◽  
Selection Of

Background: The objective of this article is to analyse if there are significant relationships between the most valuable companies operating in Spain regarding professional performance, according to nationality and location within their Autonomous Communities or any superior aggrupation. To do that, a sample of 100 companies has been selected. Methods: The methodology followed is based on the selection of the 100 highestvalued companies from the point of view of Human Resources’ policy for the period 2013-2016 and through the measurement of six factors: Talent Management, Retribution, Work environment, CSR, Training and Employees’ perception, and classified by nationality and location. The study was based on 12 hypotheses, using the Unifactorial Variance’s Analysis, Pearson correlations and regressions. One limitation could be the fact that this study refers to a particular period, focusing on Spain and the variables mentioned, based on questionnaires. The added value of this work lies on the newness as it has a quantitative character, and on the fact that most of the hypotheses do not comply. Results and Conclusion: This allows to deny certain beliefs that affirm that European and American companies operating in Spain are more attractive than the Spanish or the Mediterranean ones.

Spatial-temporal data collection process models using mobile sinks

2019 ◽  
Vol 942 (12) ◽  
pp. 22-28
Author(s):  
A.V. Materuhin ◽  
V.V. Shakhov ◽  
O.D. Sokolova
Keyword(s):  
Energy Consumption ◽  
Operation Time ◽  
Point Of View ◽  
Process Models ◽  
Temporal Data ◽  
Network Nodes ◽  
Mobile Sinks ◽  
Autonomous Operation ◽  
Data Collection Process ◽  
Spatio Temporal

Optimization of energy consumption in geosensor networks is a very important factor in ensuring stability, since geosensors used for environmental monitoring have limited possibilities for recharging batteries. The article is a concise presentation of the research results in the area of increasing the energy consumption efficiency for the process of collecting spatio-temporal data with wireless geosensor networks. It is shown that in the currently used configurations of geosensor networks there is a predominant direction of the transmitted traffic, which leads to the fact that through the routing nodes that are close to the sinks, a much more traffic passes than through other network nodes. Thus, an imbalance of energy consumption arises in the network, which leads to a decrease in the autonomous operation time of the entire wireless geosensor networks. It is proposed to use the possible mobility of sinks as an optimization resource. A mathematical model for the analysis of the lifetime of a wireless geosensor network using mobile sinks is proposed. The model is analyzed from the point of view of optimization energy consumption by sensors. The proposed approach allows increasing the lifetime of wireless geosensor networks by optimizing the relocation of mobile sinks.

Sign in / Sign up

Export Citation Format

Share Document