scholarly journals Three-dimensional composite nanomaterials based on opal matrixes for electronic devices.

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
A.F. Belyanin ◽  
◽  
A.S. Bagdasaryan ◽  
S.A. Bagdasaryan ◽  
E.R. Pavlyukova ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Chemical Properties ◽  
Spherical Particles ◽  
Composite Nanomaterials ◽  
Opal Matrix ◽  
Amorphous Sio2 ◽  
Preparation Conditions ◽  
Composition And Structure ◽  
Other Substances ◽  
Rfbr Grant

he effect of preparation conditions on the composition and structure of three-dimensional composite nanomaterials based on opal matrixes (packing of spherical particles of amorphous SiO2) has been studied. The experimental part of the work was performed with the samples of opal matrixes with a diameter of spherical SiO2 particles equal ~260 nm. Composite nanomaterials were formed by repeatedly filling of opal matrixes with solutions of metal salts (oxides) and holding the samples at 623–723 K, and after that, they were annealed at 973–1473 K. Chemical reactions and phase transformations of substances in nanopores of opal matrixes depended on the annealing parameters, and chemical properties of intermediate compounds. There was confirmed the formation of SiO2 crystallites in nanopores of composite nanomaterials, as well as the products of their interaction with SiO2. Composite nanomaterials with filling of opal matrix nanopores with metals, ferroelectrics and piezoelectrics, multiferroic and other substances have been obtained. The resulting composite nanomaterials had ordered components (substances) with a given composition and crystallite size in the range of 10–90 nm. The influence of the composition and structure of composite nanomaterials containing ferromagnetically ordered nanostructured magnetic orthovanadates of rare-earth metals, Ni-Zn-Fe-, Co-Zn-Fe-spinel, and also Co and Ni together, on their properties was demonstrated. Present research was executed under financial support by RFBR (Grant N 18-29-02076).

scholarly journals Solvent-Free Fabrication of Biphasic Lipid-Based Microparticles with Tunable Structure

Pharmaceutics ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 54
Author(s):  
Serena Bertoni ◽  
Beatrice Albertini ◽  
Joanna Ronowicz-Pilarczyk ◽  
Natalia Calonghi ◽  
Nadia Passerini
Keyword(s):  
Internal Structure ◽  
Chemical Properties ◽  
Cost Effective ◽  
Solvent Free ◽  
Spherical Particles ◽  
Lipid Phase ◽  
Composition And Structure ◽  
Ft Ir ◽  
Tunable Structure ◽  
Shell Particles

Lipid-based biphasic microparticles are generally produced by long and complex techniques based on double emulsions. In this study, spray congealing was used as a solvent-free fabrication method with improved processability to transform water-in-oil non-aqueous emulsions into spherical solid lipid-based particles with a biphasic structure (b-MPs). Emulsions were prepared by melt emulsification using different compositions of lipids (Dynasan®118 and Compritol®888 ATO), surfactants (Cetylstearyl alcohol and Span®60) and hydrophilic carriers (PEGs, Gelucire®48/16 and Poloxamer 188). First, pseudo-ternary phase diagrams were constructed to identify the area corresponding to each emulsion type (coarse emulsion or microemulsion). The hydrophobicity of the lipid mostly affected the interfacial tension, and thus the microstructure of the emulsion. Emulsions were then processed by spray congealing and the obtained b-MPs were characterized in terms of thermal and chemical properties (by DSC and FT-IR), external and internal morphology (by SEM, CLSM and Raman mapping). Solid free-flowing spherical particles (main size range 200–355 µm) with different architectures were successfully produced: microemulsions led to the formation of particles with a homogeneous internal structure, while coarse emulsions generated “multicores-shell” particles consisting of variable size hydrophilic cores evenly distributed within the crystalline lipid phase. Depending on their composition and structure, b-MPs could achieve various release profiles, representing a more versatile system than microparticles based on a single lipid phase. The formulation and technological strategy proposed, provides a feasible and cost-effective way of fabricating b-MPs with tunable internal structure and release behavior.

Crystal Structure Analysis of Cu-Zr Alloys by Convergent Beam Diffraction

1981 ◽  
Vol 39 ◽  
pp. 354-355
Author(s):  
A. F. Marshall ◽  
J. W. Steeds ◽  
D. Bouchet ◽  
S. L. Shinde ◽  
R. G. Walmsley
Keyword(s):  
Crystal Structure ◽  
Point Group ◽  
Intermetallic Phase ◽  
Three Dimensional ◽  
Crystal Structure Analysis ◽  
Ion Milling ◽  
Composition And Structure ◽  
Unit Cells ◽  
Sputter Deposited ◽  
Convergent Beam

Convergent beam electron diffraction is a powerful technique for determining the crystal structure of a material in TEM. In this paper we have applied it to the study of the intermetallic phases in the Cu-rich end of the Cu-Zr system. These phases are highly ordered. Their composition and structure has been previously studied by microprobe and x-ray diffraction with sometimes conflicting results.The crystalline phases were obtained by annealing amorphous sputter-deposited Cu-Zr. Specimens were thinned for TEM by ion milling and observed in a Philips EM 400. Due to the large unit cells involved, a small convergence angle of diffraction was used; however, the three-dimensional lattice and symmetry information of convergent beam microdiffraction patterns is still present. The results are as follows:1) 21 at% Zr in Cu: annealed at 500°C for 5 hours. An intermetallic phase, Cu3.6Zr (21.7% Zr), space group P6/m has been proposed near this composition (2). The major phase of our annealed material was hexagonal with a point group determined as 6/m.

scholarly journals Bimetallic Nanocrystals: Structure, Controllable Synthesis and Applications in Catalysis, Energy and Sensing

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1926
Author(s):  
Gaojie Li ◽  
Wenshuang Zhang ◽  
Na Luo ◽  
Zhenggang Xue ◽  
Qingmin Hu ◽  
...  
Keyword(s):  
Gas Sensing ◽  
Chemical Properties ◽  
Research Progress ◽  
Synthesis Methods ◽  
Controlled Synthesis ◽  
Controllable Synthesis ◽  
Composition And Structure ◽  
Bimetallic Nanocrystals ◽  
Physical And Chemical ◽  
And Chemical Properties

In recent years, bimetallic nanocrystals have attracted great interest from many researchers. Bimetallic nanocrystals are expected to exhibit improved physical and chemical properties due to the synergistic effect between the two metals, not just a combination of two monometallic properties. More importantly, the properties of bimetallic nanocrystals are significantly affected by their morphology, structure, and atomic arrangement. Reasonable regulation of these parameters of nanocrystals can effectively control their properties and enhance their practicality in a given application. This review summarizes some recent research progress in the controlled synthesis of shape, composition and structure, as well as some important applications of bimetallic nanocrystals. We first give a brief introduction to the development of bimetals, followed by the architectural diversity of bimetallic nanocrystals. The most commonly used and typical synthesis methods are also summarized, and the possible morphologies under different conditions are also discussed. Finally, we discuss the composition-dependent and shape-dependent properties of bimetals in terms of highlighting applications such as catalysis, energy conversion, gas sensing and bio-detection applications.

scholarly journals Direct Patterning and Spontaneous Self-Assembly of Graphene Oxide via Electrohydrodynamic Jet Printing for Energy Storage and Sensing

Micromachines ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 13 ◽  
Author(s):  
Bin Zhang ◽  
Jaehyun Lee ◽  
Mincheol Kim ◽  
Naeeung Lee ◽  
Hyungdong Lee ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Energy Storage ◽  
Self Assembly ◽  
High Performance ◽  
Three Dimensional ◽  
Chemical Properties ◽  
Layer By Layer ◽  
Energy Storage Devices ◽  
Laminar Structure ◽  
Jet Printing

The macroscopic assembly of two-dimensional materials into a laminar structure has received considerable attention because it improves both the mechanical and chemical properties of the original materials. However, conventional manufacturing methods have certain limitations in that they require a high temperature process, use toxic solvents, and are considerably time consuming. Here, we present a new system for the self-assembly of layer-by-layer (LBL) graphene oxide (GO) via an electrohydrodynamic (EHD) jet printing technique. During printing, the orientation of GO flakes can be controlled by the velocity distribution of liquid jet and electric field-induced alignment spontaneously. Closely-packed GO patterns with an ordered laminar structure can be rapidly realized using an interfacial assembly process on the substrates. The surface roughness and electrical conductivity of the LBL structure were significantly improved compared with conventional dispensing methods. We further applied this technique to fabricate a reduced graphene oxide (r-GO)-based supercapacitor and a three-dimensional (3D) metallic grid hybrid ammonia sensor. We present the EHD-assisted assembly of laminar r-GO structures as a new platform for preparing high-performance energy storage devices and sensors.

The Construction of New Proteins. II. Design, Synthesis and Conformational Studies of Folding Units with βαβ-Topology

1986 ◽  
Vol 41 (10) ◽  
pp. 1315-1322 ◽  
Author(s):  
Manfred Mutter ◽  
Karl-Heinz Altmann ◽  
Thomas Vorherr
Keyword(s):  
Solid Phase ◽  
Three Dimensional ◽  
Chemical Properties ◽  
Spectroscopic Studies ◽  
General Concept ◽  
Dimensional Structure ◽  
Design Synthesis ◽  
Phase Synthesis ◽  
Conformational Studies ◽  
Conformational Effects

The design, synthesis and preliminary conformational studies of two polypeptides exhibiting βαβ-type folding topologies are presented. In the design of the model peptides the general concept for the construction of new proteins developed in the preceeding paper was applied. According to this strategy, amphiphilic helices and β-sheets are linked together via hydrophilic loops to attain three-dimensional structures of higher order (‘supersecondary structures’). Com­puter-assisted molecular modelling served as a valuable tool for minimizing conformational con­straints within the molecules. The 38-residue peptide MI was synthesized using polyethylene glycol (PEG) as solubilizing polymeric support (‘Liquid-Phase synthesis'). Conformationally in­duced changes in the physico-chemical properties of the growing peptide chain stressed the significance of conformational effects in peptide synthesis reported earlier. Similar observations were made during the solid-phase synthesis of the 35-peptide MII. CD and IR spectroscopic studies revealed a high degree of secondary structure for both folding units. The present data strongly support the adoption of a three-dimensional structure for both models.

Effective Stiffness of a Debonded Particle in Particulate Composites

2007 ◽  
Vol 334-335 ◽  
pp. 33-36 ◽  
Author(s):  
Akihiro Wada ◽  
Yusuke Nagata ◽  
Shi Nya Motogi
Keyword(s):  
Three Dimensional ◽  
Particulate Composite ◽  
Spherical Particles ◽  
Particulate Composites ◽  
Particle Volume ◽  
Equivalent Inclusion Method ◽  
Equivalent Inclusion ◽  
Load Carrying ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

In this study, partially debonded spherical particles in a particulate composite are analyzed by three-dimensional finite element method to investigate their load carrying capacities, and the way to replace a debonded particle with an equivalent inclusion is examined. The variation in Young’s modulus and Poisson’s ratio of a composite with the debonded angle was evaluated for different particle arrangements and particle volume fractions, which in turn compared with the results derived from the equivalent inclusion method. Consequently, it was found that by replacing a debonded particle with an equivalent orthotropic one, the macroscopic behavior of the damaged composite could be reproduced so long as the interaction between neighboring particles is negligible.

Electrophoresis-Microwave Synthesis of S, N-Doped Graphene Foam for High-Performance Supercapacitors

2021 ◽  
Author(s):  
Wenqiang Wang ◽  
Wenyi Zhang ◽  
Gengchao Wang ◽  
Chunzhong Li
Keyword(s):  
Electrode Material ◽  
Microwave Synthesis ◽  
High Performance ◽  
Three Dimensional ◽  
Graphene Foam ◽  
Composition And Structure ◽  
Doped Graphene ◽  
The Ideal

The three-dimensional self-standing architecture of heteroatom-doped graphene is the ideal electrode material for supercapacitors. However, the facile control of its composition and structure is still a challenge. Herein we have...

Darcy-Forchheimer porous medium effect on rotating hybrid nanofluid on a linear shrinking/stretching sheet

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Liaquat Ali Lund ◽  
Zurni Omar ◽  
Ilyas Khan
Keyword(s):  
Porous Medium ◽  
Stability Analysis ◽  
Differential Equations ◽  
Three Dimensional ◽  
Spherical Particles ◽  
Medium Effect ◽  
Hybrid Nanofluid ◽  
Three Dimensional Flow ◽  
Content Type ◽  
Dimensional Flow

Purpose The purpose of this study is to find the multiple branches of the three-dimensional flow of Cu-Al2 O3/water rotating hybrid nanofluid perfusing a porous medium over the stretching/shrinking surface. The extended model of Darcy due to Forchheimer and Brinkman has been considered to make the hybrid nanofluid model over the pores by considering the porosity and permeability effects. Design/methodology/approach The Tiwari and Das model with the thermophysical properties of spherical particles for efficient dynamic viscosity of the nanoparticle is used. The linear similarity transformations are applied to convert the partial differential equations into ordinary differential equations (ODEs). The system of governing ODEs is solved by using the three-stage Lobatto IIIa scheme in MATLAB for evolving parameters. Findings The system of governing ODEs produces dual branches. A unique stable branch is identified with help of stability analysis. The reduced heat transfer rate has been shown to increase with the reduced ϕ2 in both branches. Further, results revealed that the presence of multiple branches depends on the ranges of porosity, suction and stretching/shrinking parameters for the particular value of the rotating parameter. Originality/value Dual branches of the three-dimensional flow of Cu-Al2 O3/water rotating hybrid nanofluid have been found. Therefore, stability analysis of the branches is also conducted to know which branch is appropriate for the practical applications. To the best of the authors’ knowledge, this research is novel and there is no previously published work relevant to the present study.

scholarly journals Effect of the Matrix on the 1.5μm Photoluminescence of Er-Doped Silicon Quantum Dots

2006 ◽  
Vol 514-516 ◽  
pp. 1116-1120 ◽  
Author(s):  
M.Fátima Cerqueira ◽  
Margarita Stepikhova ◽  
Maria Losurdo ◽  
Teresa Monteiro ◽  
Manuel J. Soares ◽  
...  
Keyword(s):  
Chemical Properties ◽  
Nanocrystalline Silicon ◽  
Raman Spectroscopic ◽  
Silicon Thin Films ◽  
Erbium Ions ◽  
Deposition Parameters ◽  
Composition And Structure ◽  
The Matrix ◽  
Er Doped ◽  
The Impact

Erbium doped nanocrystalline silicon thin films were produced by reactive magnetron r.f. sputtering. Their structural and chemical properties were studied by micro-Raman, spectroscopic ellipsometry and Rutherford backscattering spectroscopy. Films with different crystalline fraction and crystallite size were deposited by changing the deposition parameters. The impact of the composition and structure of Erbium ions environment on the 1.5 µm photoluminescence is discussed.

scholarly journals Derivation of Equations for a Size Distribution of Spherical Particles in Non-Transparent Materials

2021 ◽  
Vol 5 (4) ◽  
pp. 53-60
Author(s):  
Daniel Gurgul ◽  
Andriy Burbelko ◽  
Tomasz Wiktor
Keyword(s):  
Probability Density Function ◽  
Probability Density ◽  
Size Distribution ◽  
Density Function ◽  
Cross Section ◽  
Three Dimensional ◽  
Spherical Particles ◽  
Two Dimensional ◽  
Mathematical Formulas ◽  
Transparent Materials

This paper presents a new proposition on how to derive mathematical formulas that describe an unknown Probability Density Function (PDF3) of the spherical radii (r3) of particles randomly placed in non-transparent materials. We have presented two attempts here, both of which are based on data collected from a random planar cross-section passed through space containing three-dimensional nodules. The first attempt uses a Probability Density Function (PDF2) the form of which is experimentally obtained on the basis of a set containing two-dimensional radii (r2). These radii are produced by an intersection of the space by a random plane. In turn, the second solution also uses an experimentally obtained Probability Density Function (PDF1). But the form of PDF1 has been created on the basis of a set containing chord lengths collected from a cross-section.The most important finding presented in this paper is the conclusion that if the PDF1 has proportional scopes, the PDF3 must have a constant value in these scopes. This fact allows stating that there are no nodules in the sample space that have particular radii belonging to the proportional ranges the PDF1.

Sign in / Sign up

Export Citation Format

Share Document