scholarly journals REPELLENT EFFECT OF PLANTS ON MITES VARROA JACOBSONI (OUD., 1904) IN ARMENIA

2020 ◽  
pp. 341-345
Author(s):  
Rukhkyan ◽  
Oganesyan

In the beekeeping practice of Armenia, prevention and treatment of bee diseases has become very important in recent years. One of the known invasive bee diseases that causes significant damage to beekeeping in Armenia is Varroatosis, which is caused by the mole mites Varroa jacobsoni (Oud., 1904), that infects the larvae, pupae, and imago of bees. Varroatosis is a hidden disease that provokes the death of the bee colony. The purpose of our research is to screen the repellent effects of plants on Varroa jacobsoni mites, in order to completely abandon the use of chemical drugs during preventive and decontamination activities. We developed the proportion of the impact of the repellency of herbaceous plants growing on the territory of Armenia on Varroa jacobsoni mites in order to reject them from bees and prevent the spread of this invasive disease on an apiary. The following plants were used in our research: wormwood (Artemisia absinthium L.), yarrow (Achilleamille folium L.) and chamomile (Matricaria chamomilla L.) The results of our studies revealed a positive effect. The effectiveness of an inexpensive and completely harmless method allows us to judge about its profitability.

2019 ◽  
Vol 3 (4) ◽  
pp. 209-222
Author(s):  
Philipp K. Görs ◽  
Henning Hummert ◽  
Anne Traum ◽  
Friedemann W. Nerdinger

Digitalization is a megatrend, but there is relatively little knowledge about its consequences for service work in general and specifically in knowledge-intensive business services (KIBS). We studied the impact of digitalization on psychological consequences for employees in tax consultancies as a special case of KIBS. We compare two tax consulting jobs with very different job demands, those of tax consultants (TCs) and assistant tax consultants (ATCs). The results show that the extent of digitalization at the workplace level for ATCs correlates significantly positively with their job satisfaction. For TCs, the same variable correlates positively with their work engagement. These positive effects of digitalization are mediated in the case of ATCs by the impact on important job characteristics. In the case of TCs, which already have very good working conditions, the impact is mediated by the positive effect on self-efficacy. Theoretical and practical consequences of these results are discussed.


2012 ◽  
Vol 8 (1) ◽  
pp. 37-48
Author(s):  
S. Chehaibi ◽  
K. Abrougui ◽  
F. Haouala

The effects of mechanical perforation densities by extracting soil cores through an aerator Vertidrain with a working width of 1.6 m and equipped with hollow tines spaced of 65 mm, were studied on a sandy soil of a grassy sward in the Golf Course El Kantaoui in Sousse (Tunisia). The mechanical aeration was performed at two densities: 250 and 350 holes/m2. The cone penetration resistance and soil water infiltration were measured. These parameters were performed at initial state before aeration (E0) and then on the 10th, 20th and 30th day after aeration. These results showed that perforation density of 350 holes/m2 had a positive effect on the soil by reducing its cone resistance to penetration compared to the initial state (Rp = 14.8 daN/cm2). At 5 cm depth the decrease in resistance to penetration was 34% and 43% on the 10th and 20th day after aeration, respectively. However, on the 30th day after aeration the soil resistance to penetration tended to grow and its value compared to the initial state decreased only by 21 and 26%, respectively, at 5 and 15 cm of depth only by 10% and 9% with 250 holes/m2 density. The soil water infiltration made a good improvement after aeration compared to the initial state. This parameter increased from 4.8 cm/h to 8.3, 10.9 and 13.1 cm/h with 250 holes/m2 density and to 10, 12.9 and 14.8 cm/h with 350 holes/m2 density on the 10th, 20th and 30th day following the aeration.


2016 ◽  
pp. 37-40
Author(s):  
S.I. Zhuk ◽  
◽  
K.K. Bondarenko ◽  

Most recent studies show the impact of violations in the metabolism of folate and metin period in the pathogenesis of neural tube defects (NTD) of the fetus. Metafolin has a number of advantages, which primarily includes direct intake of substances in biologically active form and the optimum effect, even in the case when the patient homozygote and/or heterozygote genotype 677С T polymorphism in MTHFR. With the aim of prevention and treatment of various pathological conditions related to folate deficiency during pregnancy, it is advisable to apply vitamin-mineral complexes, containing metafolin - active form of folate with high bioavailability. Key words: MTHFR, metafolin, folic acid, pregnancy.


2018 ◽  
Vol 1 (3) ◽  
pp. 176-181 ◽  
Author(s):  
E. Tettey

Under-fermentation of cocoa beans produces purple beans. The fermentation period is 6 to 7 days but some cocoa farmersunder-ferment their cocoa beans leading to the development of purple cocoa beans. This study determined the impact of insectinfestation on stored purple cocoa beans. Wet cocoa beans were fermented for 1, 2, 3, 4 and 5 days to produce the purple beans.Ephestia cautella and Tribolium castaneum, both singly and in combination, were introduced into the cocoa beans and storedfor different (30, 60, 90 and 120 days) period. Insect population, percentage weight loss and the contaminants produced bythese insects were determined. Cocoa beans infested with E. cautella alone had the highest population of 297.0 ± 22.7. Beansfermented for 3 days had the lowest insect population both singly and in combination after 120 days of storage. The highestpercentage weight loss was recorded in cocoa beans fermented for one day (10.1 ± 1.87%) and 4 days (10.1 ± 8.74%). T.castaneum did not cause much damage to the cocoa beans but E. cautella alone caused significant damage to stored cocoabeans. Insect infestation and poor fermentation contribute significantly to the reduction in quality of cocoa beans.


One of efficiency indicators of grain grinders is grain granulometric composition. The basis of mixed fodder is crushed grain, the particles of which must have a leveled granulometric composition for subsequent mixing and obtaining a high-quality feed mixture. In agricultural production, hammer crushers are widely used, in which the destruction of grain occurs due to the impact of a hinged hammer. The main disadvantage of these crushers is that not the entire surface of the hammers is involved in grinding, thus reduces grinding process efficiency. A slightly different principle of material destruction is laid down in the basis of the proposed design of the shock-centrifugal grinder. Main work is performed by flat impact elements located on the rotor, which serve to accelerate crushed particles with subsequent impact of them on the bump elements. An important step in the design of new constructions of shock-centrifugal grinders is to determine size and location of the impact elements on the rotor, without which the grinding process is not possible. In the calculation method presented, the dependencies for determining the velocities and angles of a single particle flight from the surface of a flat impact element for its specified dimensions are proposed. Two variants of an impact element location on the rotor are considered and analyzed: radial and at an angle in the direction of rotor rotation. As a result of research carried out, it is noted that in the case of inclined position of an impact element on the rotor an increase in flight speed and flight angles change in crushed particles, which gives the opportunity to have a positive effect on grinding process.


2019 ◽  
Vol 72 (5) ◽  
pp. 779-783
Author(s):  
Victor A. Ognev ◽  
Anna A. Podpriadova ◽  
Anna V. Lisova

Introduction:The high level of morbidity and mortality from cardiovascular disease is largely due toinsufficient influence on the main risk factors that contribute to the development of myocardial infarction.Therefore, a detailed study and assessment of risk factors is among the most important problems of medical and social importance. The aim: To study and evaluate the impact of biological, social and hygienic, social and economic, psychological, natural and climatic risk factors on the development of myocardial infarction. Materials and methods: A sociological survey was conducted in 500 people aged 34 to 85. They were divided into two groups. The main group consisted of 310 patients with myocardial infarction. The control group consisted of 190 practically healthy people, identical by age, gender and other parameters, without diseases of the cardiovascular system. Results: It was defined that 30 factors have a significant impact on the development of myocardial infarction.Data analysis revealed that the leading risk factors for myocardial infarction were biological and socio-hygienic. The main biological factors were: hypertension and hypercholesterolemia. The man socio-hygienic factor was smoking. Conclusions: Identification of risk factors provides new opportunities for the development of more effective approaches for the prevention and treatment of myocardial infarction.


2020 ◽  
Author(s):  
Teresa O'Rourke ◽  
Carsten Vogel ◽  
Dennis John ◽  
Rüdiger Pryss ◽  
Johannes Schobel ◽  
...  

BACKGROUND It is necessary to cope with situations in daily life to prevent stress-related health consequences. However, coping strategies might differ in their impact on dealing with stressful situations in daily life. Moreover, the effect of coping strategies on situational coping might differ between women and men. OBJECTIVE The aim of this study was to investigate the impact of coping strategies on situational coping in everyday life situations and to investigate gender differences. METHODS An ecological momentary assessment study with the mobile health app TrackYourStress (TYS) was conducted with 113 participants. Coping strategies were measured at baseline with the coping scales Positive Thinking, Active Stress Coping, Social Support, Support in Faith, and Alcohol and Cigarette Consumption of the Stress and Coping Inventory (SCI). Situational coping was assessed by the question “How well can you cope with your momentary stress-level” (slider 0-100) in daily life over four weeks. Multilevel models were conducted to test the effects of the coping strategies on situational coping. Additionally, gender differences were evaluated. RESULTS Positive Thinking (P=.03) and Active Stress Coping (P=.04) had significant positive impacts on situational coping in the total sample. For women, only Social Support had a significant positive effect on situational coping (P=.046). For men, only Active Stress Coping had a significant positive effect on situational coping (P=.001). Women had higher scores on the SCI scale Social Support than men (P=.007). CONCLUSIONS These results suggest that different coping strategies could be more effective in daily life for women than for men, which should be considered in the development of interventions aimed at reducing stress consequences through coping. Interventions taking gender into consideration might lead to better coping-outcomes than generalized interventions.


2003 ◽  
Vol 30 (2) ◽  
pp. 67-104 ◽  
Author(s):  
Richard K. Fleischman ◽  
R. Penny Marquette

The impact of World War II on cost accountancy in the U.S. may be viewed as a double-edged sword. Its most positive effect was engendering greater cost awareness, particularly among companies that served as military contractors and, thus, had to make full representation to contracting agencies for reimbursement. On the negative side, the dislocations of war, especially shortages in the factors of production and capacity constraints, meant that such “scientific management” techniques as existed (standard costing, time-study, specific detailing of task routines) fell by the wayside. This paper utilizes the archive of the Sperry Corporation, a leading governmental contractor, to chart the firm's accounting during World War II. It is concluded that any techniques that had developed from Taylorite principles were suspended, while methods similar to contemporary performance management, such as subcontracting, emphasis on the design phase of products, and substantial expenditure on research and development, flourished.


Sign in / Sign up

Export Citation Format

Share Document