scholarly journals Pyrolytic kinetics of coconut shell waste using Ramped PyrOx

2018 ◽  
Author(s):  
Imtiaz Ali ◽  
Haitham Bahaitham ◽  
Raed Naebulharam
Keyword(s):  
Activation Energy ◽  
Biomass Conversion ◽  
Degradation Mechanism ◽  
Coconut Shell ◽  
Heating Rates ◽  
Experimental Conditions ◽  
Degradation Rates ◽  
Shell Waste ◽  
Mass Conversion ◽  
Kinetics Of

Biomass pyrolysis is an efficient and economical conversion process. The kinetics of biomass conversion is still not fully understood mainly because this complex material is composed of numerous compounds with very different reactivities. In this work an inverse model is used to determine the nonparametric probability density function p(Ea) of activation energy (Ea) for coconut shell waste (CSW) pyrolysis via the Ramped PyrOx (RPO) method from the time-series and temperature-series mass conversion data. In this method, the degradation rates are described by inverting distributed activation energy model (DAEM). This method does not require p(Ea) to follow any particular parametric form furthermore the modelling results are independent of experimental conditions such as heating rates. The pyrolytic kinetics is modelled considering first-order degradation mechanism.

MODEL FREE KINETICS ANALYSIS OF IMPERATA CYLINDRICA (LALANG)

2016 ◽  
Vol 78 (8-3) ◽  
Author(s):  
Olagoke Oladokun ◽  
Arshad Ahmad ◽  
Tuan Amran Tuan Abdullah ◽  
Bemgba Bevan Nyakuma ◽  
Syie Luing Wong
Keyword(s):  
Activation Energy ◽  
Biomass Conversion ◽  
Frequency Factor ◽  
Isoconversional Methods ◽  
Green Energy ◽  
Imperata Cylindrica ◽  
Heating Rates ◽  
Model Free ◽  
Solid Biofuel ◽  
Kinetics Of

This study is the first attempt at investigating the solid state decomposition and the devolatilization kinetics of Imperata cylindrica (lalang) grass termed the “farmer’s nightmare weed” as a potential solid biofuel of the future. Biomass conversion technologies such as pyrolysis and gasification can be utilized for future green energy needs. However an important step in the efficient utilization and process optimizing of biomass conversion processes is understanding the thermal decomposition kinetics of the feedstock. Consequently, thermogravimetric analysis (TGA) of Imperata cylindrica was carried out in the temperature range of 30-1000 °C at four heating rates of 5, 10, 15, and 20 K min-1 using Nitrogen at a flow rate of 20 L min-1 as purge gas. Using the TGA results, the kinetic parameters activation energy (Ea) and pre-exponential frequency factor (ko) of the grass were estimated via the model free or isoconversional methods of Kissinger and Starink. The results obtained for Kissinger model were 151.36 kJ moI-1 and 5.83 x 109 min-1 for activation energy and pre-exponential frequency factor respectively. However, Starink model activation energy and pre-exponential frequency factor were a function of conversion (α) with average values of 159.93 kJ mol-1 and 6.33 x 1022 min-1 respectively. 

On the use of Ozawa/Flynn/Wall method to determine aging activation energy for elastomers

2021 ◽  
pp. 009524432110203
Author(s):  
Sudhir Bafna
Keyword(s):  
Mechanical Properties ◽  
Activation Energy ◽  
Weight Loss ◽  
Oxygen Consumption ◽  
Dwell Time ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Degradation Mechanism ◽  
Kinetics Of ◽  
Wall Method

It is often necessary to assess the effect of aging at room temperature over years/decades for hardware containing elastomeric components such as oring seals or shock isolators. In order to determine this effect, accelerated oven aging at elevated temperatures is pursued. When doing so, it is vital that the degradation mechanism still be representative of that prevalent at room temperature. This places an upper limit on the elevated oven temperature, which in turn, increases the dwell time in the oven. As a result, the oven dwell time can run into months, if not years, something that is not realistically feasible due to resource/schedule constraints in industry. Measuring activation energy (Ea) of elastomer aging by test methods such as tensile strength or elongation, compression set, modulus, oxygen consumption, etc. is expensive and time consuming. Use of kinetics of weight loss by ThermoGravimetric Analysis (TGA) using the Ozawa/Flynn/Wall method per ASTM E1641 is an attractive option (especially due to the availability of commercial instrumentation with software to make the required measurements and calculations) and is widely used. There is no fundamental scientific reason why the kinetics of weight loss at elevated temperatures should correlate to the kinetics of loss of mechanical properties over years/decades at room temperature. Ea obtained by high temperature weight loss is almost always significantly higher than that obtained by measurements of mechanical properties or oxygen consumption over extended periods at much lower temperatures. In this paper, data on five different elastomer types (butyl, nitrile, EPDM, polychloroprene and fluorocarbon) are presented to prove that point. Thus, use of Ea determined by weight loss by TGA tends to give unrealistically high values, which in turn, will lead to incorrectly high predictions of storage life at room temperature.

Magnetic Properties, Nanostructure, and Ordering Kinetics of Nb Additive FePtCu Films

2010 ◽  
Vol 638-642 ◽  
pp. 1743-1748
Author(s):  
G.J. Chen ◽  
Y.H. Shih ◽  
Jason S.C. Jang ◽  
S.R. Jian ◽  
P.H. Tsai ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Activation Energy ◽  
Magnetic Properties ◽  
Heating Rates ◽  
Fept Alloy ◽  
Ordering Kinetics ◽  
Nb Content ◽  
Kinetics Of ◽  
Nb Addition ◽  
Microstructure And Magnetic Properties

In this study,the (FePt)94-xCu6Nbx (x=0, 2.87, 4.52, 5.67) alloy films were prepared by co-sputtering. The effects of Nb addition content and heat treatment on the microstructure and magnetic properties of the polycrystalline FePtCu films are reported. Our previous experiments showed that the ordering temperature of the (FePt)94Cu6 films reduced to 320 °C, which is much lower than that of the FePt alloy. However, the grain growth after heat treatment limited the practical application in recording media. By adding the Nb content in the (FePt)94Cu6 film, the grain sizes of the films can be adjusted from 50 to 18nm, even for the films annealed at temperature as high as 600°C. DSC traces of as-deposited disorder films at different heating rates, to evaluate the crystallization of the order phase, revealed that the addition of Nb enhanced the activation energy of ordering from 87 kJ/mol to 288 kJ/mol for the (FePt)94-xCu6Nbx (x=0 and 2.87, respectively) films. The reduction of the grain size and the corresponding increase in the activation energy of the Fe-Pt-Cu-Nb films might result from the precipitation of the Nb atoms around the ordering FePt phase. The (FePt)94-xCu6Nbx (x=2.87) film showed a coercive force of 13.4 kOe and the magnetization of 687 emu/cc.

scholarly journals Non-Isothermal Sublimation Kinetics of 2,4,6-Trinitrotoluene (TNT) Nanofilms

Molecules ◽  
2019 ◽  
Vol 24 (6) ◽  
pp. 1163 ◽  
Author(s):  
Walid Hikal ◽  
Brandon Weeks
Keyword(s):  
Activation Energy ◽  
Analytical Techniques ◽  
Heating Rates ◽  
Scanning Calorimetry ◽  
Absorbance Spectroscopy ◽  
Calculated Activation Energy ◽  
Sublimation Kinetics ◽  
Sublimation Rates ◽  
First Time ◽  
Kinetics Of

Non-isothermal sublimation kinetics of low-volatile materials is more favorable over isothermal data when time is a crucial factor to be considered, especially in the subject of detecting explosives. In this article, we report on the in-situ measurements of the sublimation activation energy for 2,4,6-trinitrotoluene (TNT) continuous nanofilms in air using rising-temperature UV-Vis absorbance spectroscopy at different heating rates. The TNT films were prepared by the spin coating deposition technique. For the first time, the most widely used procedure to determine sublimation rates using thermogravimetry analysis (TGA) and differential scanning calorimetry (DSC) was followed in this work using UV-Vis absorbance spectroscopy. The sublimation kinetics were analyzed using three well-established calculating techniques. The non-isothermal based activation energy values using the Ozawa, Flynn–Wall, and Kissinger models were 105.9 ± 1.4 kJ mol−1, 102.1 ± 2.7 kJ mol−1, and 105.8 ± 1.6 kJ mol−1, respectively. The calculated activation energy agreed well with our previously reported isothermally-measured value for TNT nanofilms using UV-Vis absorbance spectroscopy. The results show that the well-established non-isothermal analytical techniques can be successfully applied at a nanoscale to determine sublimation kinetics using absorbance spectroscopy.

Thermal Decomposition Kinetics of Flame Retardant Polybutylene Terephthalate Matrix Composites

2019 ◽  
Vol 956 ◽  
pp. 181-191
Author(s):  
Jian Lin Xu ◽  
Bing Xue Ma ◽  
Cheng Hu Kang ◽  
Cheng Cheng Xu ◽  
Zhou Chen ◽  
...  
Keyword(s):  
Activation Energy ◽  
Thermal Decomposition ◽  
Flame Retardant ◽  
Mass Loss Rate ◽  
Decomposition Reaction ◽  
Decomposition Kinetics ◽  
Thermal Decomposition Kinetics ◽  
Heating Rates ◽  
Polybutylene Terephthalate ◽  
Kinetics Of

The thermal decomposition kinetics of polybutylene terephthalate (PBT) and flame-retardant PBT (FR-PBT) were investigated by thermogravimetric analysis at various heating rates. The kinetic parameters were determined by using Kissinger, Flynn-Wall-Ozawa and Friedman methods. The y (α) and z (α) master plots were used to identify the thermal decomposition model. The results show that the rate of residual carbon of FR-PBT is higher than that of PBT and the maximum mass loss rate of FR-PBT is lower than that of PBT. The values of activation energy of PBT (208.71 kJ/mol) and FR-PBT (244.78 kJ/mol) calculated by Kissinger method were higher than those of PBT (PBT: 195.54 kJ/mol) and FR-PBT (FR-PBT: 196.00 kJ/mol) calculated by Flynn-Wall-Ozawa method and those of PBT and FR-PBT (PBT: 199.10 kJ/mol, FR-PBT: 206.03 kJ/mol) calculated by Friedman methods. There is a common thing that the values of activation energy of FR-PBT are higher than that of PBT in different methods. The thermal decomposition reaction models of the PBT and FR-PBT can be described by Avarami-Erofeyev model (A1).

Non-Isothermal Crystallization Kinetics of Mg61Zn35Ca4 Glassy Alloy

2017 ◽  
Vol 898 ◽  
pp. 657-665
Author(s):  
Dao Zhang ◽  
Wang Shu Lu ◽  
Xiao Yan Wang ◽  
Sen Yang
Keyword(s):  
Activation Energy ◽  
Crystallization Kinetics ◽  
Isothermal Crystallization ◽  
Melt Spinning ◽  
Glassy Alloy ◽  
Heating Rates ◽  
Isothermal Crystallization Kinetics ◽  
Complex Process ◽  
Activation Energy Of Crystallization ◽  
Kinetics Of

The non-isothermal crystallization kinetics of Mg61Zn35Ca4 glassy alloy prepared via melt-spinning were studied by using isoconversion method. The crystalline characterization of Mg61Zn35Ca4 was examined by X-ray diffraction. Different scanning calorimeter was used to investigate the non-isothermal crystallization kinetics at different heating rates (3-60 K/min). The calculated value of Avrami exponent obtained by Matusita method indicated that the crystalline transformation for Mg61Zn35Ca4 is a complex process of nucleation and growth. The Kissinger-Akahira-Sunose method was used to investigate the activation energy. The activation energy of crystallization varies with the extent of crystallization and hence with temperature. The Sestak-Berggren model was used to describe the non-isothermal crystallization kinetics.

scholarly journals Thermal Analysis On The Kinetics Of Magnesium-Aluminum Layered Double Hydroxides In Different Heating Rates

2015 ◽  
Vol 60 (2) ◽  
pp. 1357-1359 ◽  
Author(s):  
Y. Hongbo ◽  
C. Meiling ◽  
W. Xu ◽  
G. Hong
Keyword(s):  
Activation Energy ◽  
Thermal Analysis ◽  
Layered Double Hydroxides ◽  
Heating Rates ◽  
Scanning Calorimetry ◽  
Exponential Factor ◽  
Thermal Kinetic Parameters ◽  
Double Hydroxides ◽  
Kinetics Of ◽  
Dsc Curves

Abstract The thermal decomposition of magnesium-aluminum layered double hydroxides (LDHs) was investigated by thermogravimetry analysis and differential scanning calorimetry (DSC) methods in argon environment. The influence of heating rates (including 2.5, 5, 10, 15 and 20K/min) on the thermal behavior of LDHs was revealed. By the methods of Kissinger and Flynn-Wall-Ozawa, the thermal kinetic parameters of activation energy and pre-exponential factor for the exothermic processes under non-isothermal conditions were calculated using the analysis of corresponding DSC curves.

scholarly journals Nonisothermal Thermogravimetric Analysis of Thai Lignite with High CaO Content

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Pakamon Pintana ◽  
Nakorn Tippayawong
Keyword(s):  
Activation Energy ◽  
Thermal Decomposition ◽  
Thermogravimetric Analysis ◽  
Combustion Kinetics ◽  
Heating Rates ◽  
Thermogravimetric Method ◽  
Degradation Behaviors ◽  
Fwo Method ◽  
Free Cao ◽  
Kinetics Of

Thermal behaviors and combustion kinetics of Thai lignite with different SO3-free CaO contents were investigated. Nonisothermal thermogravimetric method was carried out under oxygen environment at heating rates of 10, 30, and 50°C min−1from ambient up to 1300°C. Flynn-Wall-Ozawa (FWO) and Kissinger-Akahira-Sunose (KAS) methods were adopted to estimate the apparent activation energy (E) for the thermal decomposition of these coals. Different thermal degradation behaviors were observed in lignites with low (14%) and high (42%) CaO content. Activation energy of the lignite combustion was found to vary with the conversion fraction. In comparison with the KAS method, higherEvalues were obtained by the FWO method for all conversions considered. High CaO lignite was observed to have higher activation energy than the low CaO coal.

scholarly journals Modelling of Thermal Decomposition Kinetics of Proteins, Carbohydrates and Lipids Using Scenedesmus microalgae thermal Data

2020 ◽  
Vol 32 (11) ◽  
pp. 2921-2926
Author(s):  
BOTHWELL NYONI ◽  
PHUTI TSIPA ◽  
SIFUNDO DUMA ◽  
SHAKA SHABANGU ◽  
SHANGANYANE HLANGOTHI
Keyword(s):  
Activation Energy ◽  
Thermal Decomposition ◽  
Bulk Material ◽  
Decomposition Kinetics ◽  
Second Order ◽  
Thermal Decomposition Kinetics ◽  
Heating Rates ◽  
High Heating ◽  
The Individual ◽  
Kinetics Of

In present work, the thermal decomposition behaviour and kinetics of proteins, carbohydrates and lipids is studied by use of models derived from mass-loss data obtained from thermogravimetric analysis of Scenedesmus microalgae. The experimental results together with known decomposition temperature range values obtained from various literature were used in a deconvolution technique to model the thermal decomposition of proteins, carbohydrates and lipids. The models fitted well (R2 > 0.99) and revealed that the proteins have the highest reactivity followed by lipids and carbohydrates. Generally, the decomposition kinetics fitted well with the Coats-Redfern first and second order kinetics as evidenced by the high coefficients of determination (R2 > 0.9). For the experimental conditions used in this work (i.e. high heating rates), the thermal decomposition of protein follows second order kinetics with an activation energy in the range of 225.3-255.6 kJ/mol. The thermal decomposition of carbohydrate also follows second order kinetics with an activation energy in the range of 87.2-101.1 kJ/mol. The thermal decomposition of lipid follows first order kinetics with an activation energy in the range of 45-64.8 kJ/ mol. This work shows that the thermal decomposition kinetics of proteins, carbohydrates and lipids can be performed without the need of experimentally isolating the individual components from the bulk material. Furthermore, it was shown that at high heating rates, the decomposition temperatures of the individual components overlap resulting in some interactions that have a synergistic effect on the thermal reactivity of carbohydrates and lipids.

scholarly journals The non-isothermal kinetics of hydroxyapatite formation in kaolin - natural phosphate mixtures

2019 ◽  
Vol 9 (1) ◽  
pp. 1-7
Author(s):  
Fateh Chouia ◽  
Hocine Belhouchet ◽  
Toufik Sahraoui
Keyword(s):  
Activation Energy ◽  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Exothermic Peak ◽  
Isothermal Kinetics ◽  
Heating Rates ◽  
Natural Phosphate ◽  
Isothermal Conditions ◽  
Kinetics Of ◽  
Hydroxyapatite Formation

In this work, the activation energy of hydroxyapatite formation in different composites under non-isothermal conditions was determined using differential thermal analysis (DTA). Seven compositions were prepared and studied while varying the percentage of the kaolin from 20 to 80 wt.% at 10% increments. The DTA conducted at heating rates of 10, 20 and 30 K min−1 showed an exothermic peak in all composites in the region 700°C–750°C associated with hydroxyapatite formation. The activation energies measured from non-isothermal treatments for seven compositions (20, 30, 40, 50, 60, 70 and 80 mass% of kaolin) were 194, 178, 178, 209, 162, 146 and 121 kJ mol−1, respectively.   Keywords:energy, kinetics,  kaolin - natural, phosphate mixtures

Sign in / Sign up

Export Citation Format

Share Document