scholarly journals ANALYSIS OF DETERMINATION OF POSITION BASED ON CONTRIBUTION OF TASK AND WORK ACHIEVEMENT

2021 ◽  
Vol 2 (1) ◽  
pp. 30-38
Author(s):  
Misbahul Munir ◽  
Yoniv Erdianto ◽  
Suparto Suparto ◽  
Suparjo Suparjo
Keyword(s):  
Work Attitudes ◽  
Project Manager ◽  
Work Attitude ◽  
Behavioral Aspect ◽  
Initial Stage ◽  
Two Factors ◽  
The Difference ◽  
Position Profile ◽  
Main Factor

To find the value of employee achievement requires several aspects such as intelligence, aspects of work attitudes, and behavioral. The initial stage of the process is to find the difference between employee and position profile that has been determined by the company where it is called GAP. The next step is to determine the weight of each gap value in three aspects. We multiply the value of 60% for the value of the main factor and 40% for additional factors then add up the two factors to determine the total value. The three factors are assessed based on the percentage determined by the company, namely 25% Intelligence Aspect, 35% Behavioral Aspect, and 40% Work Attitude Aspect. The final results are ranked, and then top ranking is achieved until the last employees who occupy the position of Project Supervisor are employees with ID number: kka_0001. For employees who are likely to fill the position of Purchasing & Logistics are employees with ID number: kka_0040. For employees who are likely to occupy the Estimator position are employees with ID number: kka_0036. For employees who fill the Project Manager position are employees with ID number: kka_0055.

Organisational Justice Perception

2014 ◽  
pp. 296-322 ◽  
Author(s):  
Anshuman Bhattacharya
Keyword(s):  
Correlation Analysis ◽  
Work Attitudes ◽  
Mutual Relationship ◽  
Perceived Justice ◽  
Work Attitude ◽  
Organisational Justice ◽  
Justice Perception ◽  
The Difference ◽  
The Relationship ◽  
Self Administered Questionnaire

The mutual relationship between employer and employee develops at the workplace on the premise of reciprocity of expectations from each other. Fulfilment of these expectations is the perception of either of the two. When an employee perceives prevalence of justice in the organization, he correlates the perception with all organisational stimuli. This chapter shows that work attitude varies in employees as a result of the difference in perceived justice in the organization. It also hypothesizes the relationship among justice perception, responses to organisational facilities, and interpersonal interactional opportunities. The chapter is a correlation analysis of variables through a self-administered questionnaire consisting of responses in Likert's scale. Some of the responses and attitudes in the study significantly correlated with the perceived level of a component of organisational justice. The study re-establishes significance of non-pecuniary means in determining work attitudes.

Slow Down You’re Moving Too Fast

2015 ◽  
Vol 27 (2) ◽  
pp. 53-63 ◽  
Author(s):  
Annie Lang ◽  
Nancy Schwartz ◽  
Sharon Mayell
Keyword(s):  
Older Adults ◽  
Cognitive Aging ◽  
Attention And Memory ◽  
Younger Adults ◽  
Media Messages ◽  
Two Factors ◽  
The Difference

The study reported here compared how younger and older adults processed the same set of media messages which were selected to vary on two factors, arousing content and valence. Results showed that older and younger adults had similar arousal responses but different patterns of attention and memory. Older adults paid more attention to all messages than did younger adults. However, this attention did not translate into greater memory. Older and younger adults had similar levels of memory for slow-paced messages, but younger adults outperformed older adults significantly as pacing increased, and the difference was larger for arousing compared with calm messages. The differences found are in line with predictions made based on the cognitive-aging literature.

FRACTIONAL DETERMINATIONS OF URINARY 17-KETOSTEROIDS IN HYPEREMESIS GRAVIDARUM

1962 ◽  
Vol 41 (1) ◽  
pp. 123-128 ◽  
Author(s):  
Pentti A. Järvinen ◽  
Sykkö Pesonen ◽  
Pirkko Väänänen
Keyword(s):  
Hyperemesis Gravidarum ◽  
First Trimester ◽  
Control Group ◽  
Before And After ◽  
Daily Urine ◽  
First Trimester Of Pregnancy ◽  
The Difference

ABSTRACT The fractional determination of 17-ketosteroids in the daily urine was performed in nine cases of hyperemesis gravidarum and in four control cases, in the first trimester of pregnancy both before and after corticotrophin administration. The excretion of total 17-KS is similar in the two groups. Only in the hyperemesis group does the excretion of total 17-KS increase significantly after corticotrophin administration. The fractional determination reveals no difference between the two groups of patients with regard to the values of the fractions U (unidentified 17-KS), A (androsterone) and Rest (11-oxygenated 17-KS). The excretion of dehydroepiandrosterone is significantly higher in the hyperemesis group than in the control group. The excretion of androstanolone seems to be lower in the hyperemesis group than in the control group, but the difference is not statistically significant. The differences in the correlation between dehydroepiandrosterone and androstanolone in the two groups is significant. The high excretion of dehydroepiandrosterone and low excretion of androstanolone in cases of hyperemesis gravidarum is a sign of adrenal dysfunction.

THE SUBJECT FIELD OF INSTITUTIONAL EDUCATION: THE SENSE AND PROSPECTS OF DEVELOPMENT IN UKRAINE

2020 ◽  
pp. 25-38
Author(s):  
Irina Mordous
Keyword(s):  
Decisive Role ◽  
Subject Field ◽  
National Education ◽  
Progressive Development ◽  
Separate Area ◽  
Economic Transformations ◽  
The Difference ◽  
The Individual ◽  
Political Economic

The development of modern civilization attests to its decisive role in the progressive development of institutions. They identified the difference between Western civilization and the rest of the world. Confirmation of the institutional advantages of the West was its early industrialization. The genesis and formation of institutionalism in its ideological and conceptualmethodological orientation occurs as a process alternative to neoclassic in the context of world heterodoxia, which quickly spread in social science. Highlighting institutional education as a separate area of sociocultural activity is determined by the factor of differentiation of institutional theory as a whole. A feature of institutional education is its orientation toward the individual and his/her transformation into a personality. The content of institutional education is revealed through the analysis of the institution, which includes a set of established customs, traditions, ways of thinking, behavioral stereotypes of individuals and social groups. The dynamics of socio-political, economic transformations in Ukraine requires a review of the foundations of national education and determination of the prospects for its development in the 21st century in the context of institutionalism.

scholarly journals Possibility of Human Gender Recognition Using Raman Spectra of Teeth

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3983
Author(s):  
Ozren Gamulin ◽  
Marko Škrabić ◽  
Kristina Serec ◽  
Matej Par ◽  
Marija Baković ◽  
...  
Keyword(s):  
Raman Spectra ◽  
Principal Component ◽  
Support Vector ◽  
Gender Recognition ◽  
Proof Of Concept ◽  
Male And Female ◽  
Tooth Type ◽  
Tooth Apex ◽  
The Difference

Gender determination of the human remains can be very challenging, especially in the case of incomplete ones. Herein, we report a proof-of-concept experiment where the possibility of gender recognition using Raman spectroscopy of teeth is investigated. Raman spectra were recorded from male and female molars and premolars on two distinct sites, tooth apex and anatomical neck. Recorded spectra were sorted into suitable datasets and initially analyzed with principal component analysis, which showed a distinction between spectra of male and female teeth. Then, reduced datasets with scores of the first 20 principal components were formed and two classification algorithms, support vector machine and artificial neural networks, were applied to form classification models for gender recognition. The obtained results showed that gender recognition with Raman spectra of teeth is possible but strongly depends both on the tooth type and spectrum recording site. The difference in classification accuracy between different tooth types and recording sites are discussed in terms of the molecular structure difference caused by the influence of masticatory loading or gender-dependent life events.

scholarly journals The use of classical methods and neural networks in deformation studies of hydrotechnical objects

2020 ◽  
Vol 12 (1) ◽  
pp. 718-725
Author(s):  
Maria Mrówczyńska ◽  
Jacek Sztubecki ◽  
Małgorzata Sztubecka ◽  
Izabela Skrzypczak
Keyword(s):  
Neural Networks ◽  
Artificial Neural Networks ◽  
Cylinder Surface ◽  
Building Structures ◽  
Steel Cylinder ◽  
Factors Affecting ◽  
Initial Stage ◽  
Artificial Neural ◽  
Set Of Points

Abstract Objects’ measurements often boil down to the determination of changes due to external factors affecting on their structure. The estimation of changes in a tested object, in addition to proper measuring equipment, requires the use of appropriate measuring methods and experimental data result processing methods. This study presents a statement of results of geometrical measurements of a steel cylinder that constitutes the main structural component of the historical weir Czersko Polskie in Bydgoszcz. In the initial stage, the estimation of reliable changes taking place in the cylinder structure involved the selection of measuring points essential for mapping its geometry. Due to the continuous operation of the weir, the points covered only about one-third of the cylinder area. The set of points allowed us to determine the position of the cylinder axis as well as skews and deformations of the cylinder surface. In the next stage, the use of methods based on artificial neural networks allowed us to predict the changes in the tested object. Artificial neural networks have proved to be useful in determining displacements of building structures, particularly hydro-technical objects. The above-mentioned methods supplement classical measurements that create the opportunity for carrying out additional analyses of changes in a spatial position of such structures. The purpose of the tests is to confirm the suitability of artificial neural networks for predicting displacements of building structures, particularly hydro-technical objects.

scholarly journals Influence of Erythrocytes on Direct Potentiometric Determination of Sodium and Potassium

1983 ◽  
Vol 20 (2) ◽  
pp. 116-120 ◽  
Author(s):  
P Bijster ◽  
H L Vader ◽  
C L J Vink
Keyword(s):  
Whole Blood ◽  
Potassium Concentration ◽  
Reference Electrode ◽  
Sodium Concentration ◽  
General Phenomenon ◽  
Liquid Junction ◽  
Direct Potentiometry ◽  
The Difference ◽  
Sodium And Potassium

We have shown that the sodium concentration in whole blood measured by direct potentiometry is higher than in plasma. The ‘erythrocyte-effect’, already described by Siggaard Andersen, is most pronounced for instruments equipped with a reference electrode with an open static liquid junction and is thus a general phenomenon. Instruments with a modified liquid junction show less interference. The same phenomenon appears for the determination of the potassium concentration, although the difference between whole blood and plasma, when measured with instruments equipped with a modified liquid junction, can be neglected in practice.

Method for the simultaneous quantification of n-hexane metabolites: application to n-hexane metabolism determination

1996 ◽  
Vol 15 (6) ◽  
pp. 497-503 ◽  
Author(s):  
T. Soriano ◽  
M. Menéndez ◽  
P. Sanz ◽  
M. Repetto
Keyword(s):  
Similar Pattern ◽  
Analytical Procedure ◽  
Daily Basis ◽  
Practical Application ◽  
Simultaneous Quantification ◽  
Exposed Workers ◽  
Before And After ◽  
Time Requirements ◽  
The Difference

1 The described analytical procedure permits the simultaneous determination of the main n-hexane meta bolites in urine. 2-Hexanone, 2-hexanol, 2, 5-hexanediol and 2, 5-hexanedione, were chosen to dose the rats used in this study. All urine samples were collected and analysed on a daily basis, before and after acidic hydrolysis (pH 0.1) by GC/MS. 2-Hexanone, 2, 5-dimethylfurane, γ-valerolac tone and 2, 5-hexanedione were determined before hydro lysis ; 2-hexanol and 2, 5-hexanediol, after hydrolysis; and 5-hydroxy-2-hexanone and 4, 5-dihydroxy-2-hexanone were calculated by the difference between γ-valerolactone and 2, 5-hexanedione with and without hydrolysis, respectively. 2 A metabolic scheme was proposed reflecting the biotransformations undergone by the four compounds assayed. We consider 2, 5-dimethylfurane as a 'true metabolite' because the quantities detected were always greater before hydrolysis. 3 It has been reported that human and rat n-hexane metabolism follow a similar pattern. Therefore, as a practical application and without increasing either sample or time requirements, the simultaneous quantifi cation of the different metabolites and their excretion profile could provide better information about the metabolic situation of exposed workers than the determi nation of 2, 5-hexanedione alone. According to our experimental results, 4, 5-dihydroxy-2-hexanone itself would be a good toxicity indicator.

scholarly journals An experimental and theoretical investigation of diffusion in a two-phase alloy

1948 ◽  
Vol 192 (1031) ◽  
pp. 575-592 ◽  
Keyword(s):  
Free Energy ◽  
Single Phase ◽  
Phase State ◽  
Theoretical Treatment ◽  
Research Association ◽  
Essential Difference ◽  
Two Phase ◽  
Two Factors ◽  
Order Of Magnitude ◽  
The Difference

The present paper describes an investigation of diffusion in the solid state. Previous experimental work has been confined to the case in which the free energy of a mixture is a minimum for the single-phase state, and diffusion decreases local differences of concentration. This may be called ‘diffusion downhill’. However, it is possible for the free energy to be a minimum for the two-phase state; diffusion may then increase differences of concentration; and so may be called ‘diffusion uphill’. Becker (1937) has proposed a simple theoretical treatment of these two types of diffusion in a binary alloy. The present paper describes an experimental test of this theory, using the unusual properties of the alloy Cu 4 FeNi 3 . This alloy is single phase above 800° C and two-phase at lower temperatures, both the phases being face-centred cubic; the essential difference between the two phases is their content of copper. On dissociating from one phase into two the alloy develops a series of intermediate structures showing striking X-ray patterns which are very sensitive to changes of structure. It was found possible to utilize these results for a quantitative study of diffusion ‘uphill’ and ‘downhill’ in the alloy. The experimental results, which can be expressed very simply, are in fair agreement with conclusions drawn from Becker’s theory. It was found that Fick’s equation, dc / dt = D d2c / dx2 , can, within the limits of error, be applied in all cases, with the modification that c denotes the difference of the measured copper concentration from its equilibrium value. The theory postulates that D is the product of two factors, of which one is D 0f the coefficient of diffusion that would be measured if the alloy were an ideal solid solution. The theory is able to calculate D/D 0 , if only in first approximation, and the experiments confirm this calculation. It was found that in most cases the speed of diffusion—‘uphill’ or ‘downhill’—has the order of magnitude of D 0 . * Now with British Electrical Research Association.

Determination of Resistance to Abrasive Wear. VIII. Influence of Softeners in Tests with the Akron-Croydon and Du Pont Machines

1949 ◽  
Vol 22 (1) ◽  
pp. 259-262
Author(s):  
J. F. Morley
Keyword(s):  
Unit Area ◽  
Published Data ◽  
The Road ◽  
Abrasive Surface ◽  
Abrasive Power ◽  
The Difference ◽  
On The Road ◽  
The Right ◽  
Abrasion Testing

Abstract These experiments indicate that softeners can influence abrasion resistance, as measured by laboratory machines, in some manner other than by altering the stress-strain properties of the rubber. One possible explanation is that the softener acts as a lubricant to the abrasive surface. Since this surface, in laboratory abrasion-testing machines, is relatively small, and comes repeatedly into contact with the rubber under test, it seems possible that it may become coated with a thin layer of softener that reduces its abrasive power. It would be interesting in this connection to try an abrasive machine in which a long continuous strip of abrasive material was used, no part of it being used more than once, so as to eliminate or minimize this lubricating effect. The fact that the effect of the softener is more pronounced on the du Pont than on the Akron-Croydon machine lends support to the lubrication hypothesis, because on the former machine the rate of wear per unit area of abrasive is much greater. Thus in the present tests the volume of rubber abraded per hr. per sq. cm. of abrasive surface ranges from 0.03 to 0.11 cc. on the du Pont machine and from 0.0035 to 0.0045 cc. on the Akron-Croydon machine. On the other hand, if the softener acts as a lubricant, it would be expected to reduce considerably the friction between the abrasive and the rubber and hence the energy used in dragging the rubber over the abrasive surface. The energy figures given in the right-hand columns of Tables 1 and 3, however, show that there is relatively little variation between the different rubbers. As a test of the lubrication hypothesis, it would be of interest to vary the conditions of test so that approximately the same amount of rubber per unit area of abrasive is abraded in a given time on both machines; this should show whether the phenomena observed under the present test conditions are due solely to the difference in rate of wear or to an inherent difference in the type of wear on the two machines. This could most conveniently be done by considerably reducing the load on the du Pont machine. In the original work on this machine the load was standardized at 8 pounds, but no figures are quoted to show how abrasion loss varies with the load. As an addition to the present investigation, it is proposed to examine the effect of this variation with special reference to rubbers containing various amounts and types of softener. Published data on the influence of softeners on the road wear of tire rubbers do not indicate anything like such large effects as are shown by the du Pont machine. This throws some doubt on the value of this machine for testing tire tread rubbers, a conclusion which is confirmed by information obtained from other workers.

Sign in / Sign up

Export Citation Format

Share Document