scholarly journals ISSUES REGARDING ESTIMATION OF THE COST OF SERVICES WHILE ARRYING OUT TRADEMARK EXAMINATIONS

2019 ◽  
Vol 19 (1) ◽  
pp. 417-426
Author(s):  
I. Sabadash ◽  
V. Hubareva
Keyword(s):  
Raw Materials ◽  
Methodological Approach ◽  
Research Work ◽  
Scientific Activity ◽  
National Standard ◽  
Subject Field ◽  
Methodological Principles ◽  
Trade Analysis ◽  
The Cost

The development of new directions while performing of various types of examinations and forensic researches is one of the priority areas of scientific activity of experts of forensic science institutions of the Ministry of Justice of Ukraine. One of problematic issues arising at the present stage of the development of forensic trade analysis is determining the cost of services, choosing a methodological approach and method for performing aforesaid researches, the limits of competence of forensic trade experts while determining the cost of certain services. Creating methodological recommendations “Determining the Cost of Services while performing forensic trade analysis «will contribute to the improvement of the quality of expert practice in carrying out the forensic examinations in this field. Whole performing forensic trade researches to determine the cost of services in the framework of the expert subject field 12.1. «Determining the cost of machinery, equipment, raw materials and consumer goods» raises a lot of disputes and doubts, both among forensic experts working in state expert institutions and among appraisers. This is due to the fact that the service is considered to be a product that is endless that means intangible. Also, one of the arguments is that the word service is not listed in the title of specialty 12.1 and does not apply to objects of valuation in intangible form, according to the definitions of national standard No. 1 «General principles for property and property rights assessment». At the 39th meeting of the section of forensic trade analysis at the Ministry of Justice of Ukraine which was held in May 2018, it was proposed to consider a research work on the topic: “Determining the cost of services while performing forensic trade examinations” will contribute to ensure objectivity and completeness of research on determining the cost of services, the formation of uniform methodological principles for performing examinations and forensic researches in this area filling in the gaps in determining the cost of services, using them for preparing and confirmation of the qualifications of forensic experts in relevant subject field.

scholarly journals The Effectiveness of the Quality of Performance Using the Cost Accounting Information System in the Control of Quality Costs Study in the General Company for Electrical Industries

2019 ◽  
Vol 27 (2) ◽  
pp. 115-132
Author(s):  
Hanan Abdullah Hassan Al-Amar ◽  
Qasim Ali Omran Al-Bayati ◽  
Huda Jabbar Kadhum Al-Haiyali
Keyword(s):  
Information Systems ◽  
Raw Materials ◽  
Accounting Information ◽  
Cost Accounting ◽  
Technical Standards ◽  
Accounting Systems ◽  
Accounting Information Systems ◽  
Quality Costs ◽  
The Cost

The financial operations which carried out by economic unity are proven treatment and documenting and continuous down to makers decision by relevance objective and time and then to reflect on the decision maker in any center of responsibility. That ’s provided by the system accounting information where the source is the basis for producing important accounting information, And the cost accounting information systems of the most important information systems that deal with data processing and conversion to information of relative importance to the beneficiaries. Which is consist with The objective of the research that emphasize the importance of accounting systems in general and systems cost in particular to achieve the highest c The research has led to a number of results, the most important of which is the difficulty in controlling quality costs as well as the waste of economic resources in the company. The researchers recommended adherence to the technical standards to achieve the quality of performance as well as conducting a thorough examination of samples and focusing on the quality of raw materials and testing before use to reduce the proportion Damage.

scholarly journals STUDENT SCIENTIFIC SOCIETY AS A CENTER FOR FUTURE SOCIAL SPECIALISTS’ TRAINING

2021 ◽  
pp. 163-173
Author(s):  
Oksana Kravchenko ◽  
Olga Matros ◽  
Anzhelika Bilenko
Keyword(s):  
Higher Education ◽  
Research Work ◽  
Scientific Activity ◽  
Practical Significance ◽  
Practical Training ◽  
Scientific Society ◽  
Important Means ◽  
Level Of Training ◽  
High Educational

The purpose of the student scientific society is to organize student research, promote the quality of scientific and practical training of students, expand their general and professional worldview, meet other needs and interests, which is an integral part of the successful development of the institution. Therefore, students of the faculty are active participants in All-Ukrainian competitions of scientific works, student Olympiads, where they constantly certify a high educational, methodological, and scientific level of training, receiving victories and prizes. The purpose of the study is to cover and analyze the student scientific society in higher education and at the Faculty of Social and Psychological Education of PTUSPU, in particular, as the main centre of organization and involvement of students in research. Methodology. The features of the student scientific society have been revealed using methods of analysis, synthesis and generalization of regulations and documents, its research work at the faculty. Results and practical significance. It has been found that the activities of the faculty of the Student Scientific Society contribute to the intensification of the student's research work as one of the most important means of improving the quality of training with higher education and the development of scientific thinking and creativity. It is determined that due to the activity of the society students develop skills of independent scientific activity.

scholarly journals The benefit attributes of the Indonesian National Standard (SNI) product

2018 ◽  
Vol 49 ◽  
pp. 01003
Author(s):  
Muhammad Rosiawan ◽  
Moses Laksono Singgih ◽  
Erwin Widodo
Keyword(s):  
Raw Materials ◽  
Consumer Perceptions ◽  
The Other ◽  
National Standard ◽  
Certification Program ◽  
Positive Perception ◽  
Certification Process ◽  
The Government ◽  
Quality Guarantee

This research aims to measure the benefit of the Indonesian National Standard (SNI) product not only came from the company perceptions but also came from the government, academician, and consumer perceptions in Surabaya. The empirical study result showed that all of the respondents had a positive perception on the SNI product. They stated agreement that the SNI product had benefit on the attributes: quality guarantee of product, safe to use, a fair prices, quality of raw materials, and efficiency. Those attributes support the enhancement of company’s competitiveness. However, most of the respondents of companies and consumers state did not know about the quality guarantee of the SNI product. The results were contradictory, the respondents who came from the companies knew more about quality guarantee of the SNI product compared to the other respondents. Furthermore, the respondents of academicians, consumers, and particularly companies state that they did not know about the easiness of the SNI certification process and the government provide an incentive for the registration fee of the SNI certification. This ignorance will impact on the perceptions that process of the SNI certification was complicated and costly. Besides, it showed that the government was less to conduct socialization for the certification program compared to socialization for the standard program.

scholarly journals Determination of the transfer step of the ore chute while mining the technogenic deposit of the bulk type

2020 ◽  
Vol 166 ◽  
pp. 02004
Author(s):  
Volodymyr Peregudov ◽  
Ihor Hryhoriev ◽  
Serhii Joukov ◽  
Yulian Hryhoriev
Keyword(s):  
Raw Materials ◽  
Mining Industry ◽  
Process Conditions ◽  
Geological Conditions ◽  
Scientific Task ◽  
Technogenic Deposit ◽  
Mining Works ◽  
The Cost

Further development of the open mining works on the domestic enterprises will be accompanied by the worsening of mining-geological conditions and declining of the quality of iron ore raw materials. In the same time, the accumulated mining wastes, that can make the technogenic deposits, pass into one of the important sources of the mineral raw materials. Taking into account this thing, the development and implementation of the modern technological circuits of the technogenic deposit development is an actual calling for mining industry, and determination and optimization of process conditions of the technogenic deposit development – is the scientific task of this publication. The obtained results of studies of the optimum step value of the ore chute transfer during the technogenic deposit development can be used by design organizations and mining enterprises for designing works. The obtained methodology and the proposed mathematical dependencies will reduce the cost of mining of the technogenic deposit due to the reasonable timely transfer of the open ore chute.

scholarly journals The use of cellular communication masts for wind share research

Energetika ◽  
2018 ◽  
Vol 64 (2) ◽  
Author(s):  
Valerijs Bezrukovs ◽  
Vladislavs Bezrukovs ◽  
Sabine Upnere ◽  
Linda Gulbe ◽  
Deniss Bezrukovs
Keyword(s):  
Wind Speed ◽  
Methodological Approach ◽  
Cellular Communication ◽  
Quality Data ◽  
Cfd Modelling ◽  
Contour Maps ◽  
Wind Potential ◽  
The Cost ◽  
The Impact

Prior to the start of any Wind Power Park construction project, it is necessary to carefully assess available wind potential in the selected area. The cost of such investigative studies is considerable – even with a relatively small 70 m tall mast it reaches several tens of thousands of Euros. In order to reduce costs related to wind speed measurements it is suggested to use the existing cellular communication masts that are widely spread in Europe. The study presents a methodological approach and the results of wind speed and wind shear measurements performed with the use of lattice cellular communication masts at the height of up to 100 m. A CFD model of airflow around a cellular communication mast structure was created in order to explore the impact of mast structure on the quality of wind speed measurements. The paper presents the results of the CFD modelling in the form of contour maps depicting the severity of airflow disturbances around the mast. The study is based on experimental measurements conducted in 2018 in three coastal sites of Latvia. At each site wind speed and direction were measured at several heights along with air temperature, humidity and air pressure. The experimentally obtained data in combination with the analysis of modelled CFD results shows the possibility of using cellular communication masts for accurate measurements of wind speed. Overall, the study shows that the proposed approach to wind speed measurements can result in high quality data and reduced overall expenses.

scholarly journals DIGTYARI WEAVING PROFESSIONAL SCHOOL IN 1926-1929

2020 ◽  
pp. 5-20
Author(s):  
A. L Shcherban
Keyword(s):  
General Education ◽  
Raw Materials ◽  
Educational Institution ◽  
Research Work ◽  
Educational Process ◽  
Professional School ◽  
Educational Institutions ◽  
Teaching Staff ◽  
Material Base

For the first time, the activity of the weaving vocational school in the village Digtyari (modern Chernihiv region) is analyzed. It was the leading educational institution of the middle level of vocational education of the Ukrainian SSR in the second half of the 1920s, in which the creators of traditional textiles studied. The students learned the skills of making carpets, embroidered shirts, and kerchiefs. On the basis of archival sources, the histories, educational process, composition of the teaching and student groups of the school during 1926-1929 are covered. Established in the fall of 1926, the institution was to train qualified master practitioners for the factory and handicraft arts industry, who had formed an artistic taste. The teaching staff initially consisted of local general education teachers and visiting instructors and teachers of special subjects (O. Reisfeld and M. Dyachenko). The institution was headed by uneducated communists Yu. Kozelev and S. Lutayenko. The students of the first set were mostly non-locals, orphans. But the second set already consisted mostly of children of local peasants and artisans. The school had a significant material base, which remained from the textile educational institutions that operated in Digtyary during the first quarter of the twentieth century. The main rooms were located on the right-wing of the main building of the palace complex of the Galagan estate. As a result of the study of the materials of the minutes of the meetings of the school council, the conflict situations that constantly arose between the managers and their supporters and visiting specialists and led to the departure of the latter from Digtyary were analyzed. The initial stage of the existence of the Digtyari weaving professional school, problems in relations between staff, and the originality of the contingent of the first set of students influenced the quality of their training. As it is clear from the available sources, during the first and the beginning of the second school year students worked both theoretically and practically, but due to lack of raw materials they could not produce a significant amount of full-fledged products. The school’s workshop worked on “factory” and, in part, “peasant” raw materials. At the end of the second year of study, students were already making work suitable for sale. The school operated in two directions. The visiting instructor, an experienced artist M. Dyachenko brought a new vision of teaching graphic literacy into the educational process. Weaving and embroidery instructors who either graduated from the textile schools previously existing in Digtyary (A. Reisfeld, V. Nikolskaya) or worked there for a long time (G. Tsybuleva) broadcast local traditions. During the years under study, about 100 students studying at the institution, and one graduation took place. Troubles in the personal relationship between teachers and school management and insufficient funding have affected the quality of education. But even in such conditions, students not only mastered special and general education subjects but also participated in exhibitions, made marketable products, engaged in research work. Curricula developed by M. Dyachenko and O. Reisfeld became a model for other craft educational institutions. And the textbook was written by O. Reisfeld - the first Ukrainian-language textbook on the technology of folk weaving. Keywords: Digtyari weaving professional school, Mykhaylo Dyachenko, Pryluky region.

scholarly journals EDITORIAL

1993 ◽  
Vol 10 (4) ◽  
pp. v-vii
Author(s):  
Sayyid M. Syeed
Keyword(s):  
Social Sciences ◽  
Local Community ◽  
Methodological Approach ◽  
Primary Source ◽  
Scientific Activity ◽  
Cultural Knowledge ◽  
Empirical Reality ◽  
Social Scientists ◽  
Islamic Studies

With this fourth issue of 1993, we have completed ten years of publishingthe American Journal of Islamic Social Sciences (MISS). Westarted our journey in 1984 with two issues published during the yearunder the title of American Journal of Islamic Studies. The next year itwas transformed into the American Journal of Islamic Social Sciences(AJISS). The first decade has been quite a pioneering experience, and bynow we have been able to identify a growing pool of thinkers, writers,and social scientists who are participating in our endeavor to promote ascholarly forum on Islam.In this issue, Rosalind W. Gwynne's paper is part of a continuing discussionon sunnah. She demonstrates that, in Islamic texts, sunnah doesnot refer only to the Sunnah of the Prophet, of the local community, orof the Companions and the early community; it can refer to the "SunnatAll&" (the practice of God). She reviews the occurrence of the wordsunnah in the Qur'an and, by analyzing some tafair and early documents,shows that it also refers to the universal and unchanghg rules thatAllah has established and set into motion. She quotes Wensinck's Concordanceof Hadith, in which sunnah has been used in the context of"Sunnat Alliih alongside with "Sunnat a1 Nabi" and sunnah in othersenses. Social scientists must concentrate on the "Sunnat AllW in orderto understand the universal laws of Allah that govern social phenomena.Louay Safi provides a methodological approach that recognizes revelationas a primary source of knowledge and seeks to use both text andaction analysis techniques as necessary theory-building tools. He arguesthat scientific activity presupposes metaphysical knowledge and that, furthermore,it is even impossible without transcendental ptesuppositions. Healso contends that revelation's truth is rooted in empirical reality and thatthe quality of evidence supporting revealed truth is of no less caliber thanthat justifying empirical truth.Ebtihaj Al-A'ali presented her paper on "Assumptions Concerning theSocial Sciences: A Comparative Perspective" at a recent Toronto, Canada,confemce dealing with cross-cultural knowledge. She summarizes briefly ...

scholarly journals MULTI CRITERIA SUPPLIER SELECTION USING A HYBRID FUZZY AHP- TAGUCHI TECHNIQUE: THE CASE OF TEXTILE INDUSTRY

2020 ◽  
Vol 8 (2) ◽  
Author(s):  
Wilson Kosasih ◽  
Vieren Yulies Triyani ◽  
Ahmad Ahmad ◽  
Carla Olyvia Doaly
Keyword(s):  
Textile Industry ◽  
Supplier Selection ◽  
Raw Materials ◽  
Fuzzy Ahp ◽  
Research Data ◽  
Taguchi Technique ◽  
Survey Results ◽  
The Cost ◽  
Factual Data

This paper discusses a method that integrates Fuzzy AHP with Taguchi Loss Function. The method used to select suppliers with various criteria. This various criteria will be considered to get the best supplier. This research was conducted at a textile company in Indonesia for the cotton product 41166. The purpose of this research is to apply techniques to improve the performance of Fuzzy AHP by considering the cost of losses as small as possible. Research data obtained from the survey results using questionnaires and company factual data in the form of costs of losses incurred due to improper quantity of raw materials, quality of raw materials that are not in accordance with standards, delays in delivery, prices that exceed expectations, and poor service or response. The results of this research shown the value of losses incurred by 1st, 2nd, 3rd, 4th suppliers respectively for $ 2.23, $ 671.12, $ 815.57, and $ 1243.64. Among four suppliers, the best supplier with the smallest loss value is first supplier.

scholarly journals Modelling of the process of vybromechanical activation of plant raw material hydrolysis for pectin extraction

10.5219/1305 ◽  
2020 ◽  
Vol 14 ◽  
pp. 239-246
Author(s):  
Igor Palamarchuk ◽  
Mikhailo Mushtruk ◽  
Vladislav Sukhenko ◽  
Vladislav Dudchenko ◽  
Lidija Korets ◽  
...  
Keyword(s):  
Power Consumption ◽  
Raw Materials ◽  
Equations Of Motion ◽  
Oscillatory System ◽  
Drive Shaft ◽  
Raw Material ◽  
Plant Raw Materials ◽  
The Cost ◽  
Power And Energy

Centrifugal and vibrational technological effects are among the main approaches to intensify the process of plant raw materials hydrolysis for pectin extraction. With the impulse intensification of such a process, it is possible not only to increase its efficiency, but also to achieve the compactness of the equipment, reduce the cost of electricity and improve the quality of the product of hydrolysis. The hypothesis is confirmed, according to which the vibro-centrifugal intensification of hydrolysis increases the driving force of the process by not only activating the material flows of raw materials and reagents, but also by reducing the resistance in the technological environment. Graphical and analytical dependencies of the power and energy parameters of the oscillatory system were obtained, which proved the overcoming of the flow resistance of the liquid medium in the entire speed range of the drive shaft with the potential to intensify the process at a power consumption of 2.0 – 3.0 kW and or by the force of 2.3 – 2.5 kN using the Lagrange and Cauchy methods for composing and solving the equations of motion of the moving components of the tested hydrolyser with vibrating activators, and the methods of mathematical analysis and their processing in the MathCAD. The analysis of the presented parameters of the studied process of mixing the pectin-containing mass in the hydrolyser allowed us to determine the rational mode parameters of processing, which correspond to the angular velocity of the drive shaft  rad/s at the power consumption of 500 – 600 watts.

The role of feeding in the prevention of non-communicable diseases of poultry

2019 ◽  
Author(s):  
Сергей Енгашев ◽  
Syergyey YEngashyev ◽  
Тамара Околелова ◽  
Tamara Okolelova
Keyword(s):  
Metabolic Disorders ◽  
Raw Materials ◽  
Production Costs ◽  
Biologically Active ◽  
Poisonous Plants ◽  
Minimum Requirements ◽  
The Cost ◽  
Poultry Farming

The book deals with many factors, including anti-nutritional, determining the biological value of feed components. Considerable attention is paid to the minimum requirements that must be imposed on the quality of raw materials and can be met in each economy. Provides information on poisonous plants and weeds that may be present in the plant material and cause phytotoxicity. The causes of diseases of feed nature associated with metabolic disorders, and ways to prevent them. The consequences of technological violations in poultry farming are revealed. The role of the quality of raw materials, biologically active and mineral substances in the prevention of certain diseases of forage nature, increasing the productivity of poultry, reducing the cost of feed and their production costs. It is addressed to specialists and managers of poultry farms, feed industry enterprises, researchers, postgraduates and students.

Sign in / Sign up

Export Citation Format

Share Document