PENGARUH PENAMBAHAN PASIR BESI TERHADAP KUAT TEKAN BETON K-300

2019 ◽  
Vol 6 (1) ◽  
Author(s):  
Erny Agusri ◽  
Masri A Rivai
Keyword(s):  
Compressive Strength ◽  
Concrete Compressive Strength ◽  
Normal Concrete ◽  
Concrete Quality

The purpose of this study was to determine the effect of iron sand on the K-300 concrete compressive strength. Iron sand added with a variation of 2-4% using cube-shaped specimens with dimensions of 15 × 15 × 15 cm as many as 27 samples consisting of 3 variations, each with 9 samples, concrete quality tested at 3, 7, and 28 days. The results showed the compressive strength of normal concrete characteristics at 3 days of age was 238.76 Kg / cm2, 7 days was 270.64 Kg / cm2, and 28 days was 370.16 Kg / cm2, the addition of iron sand was 2% at 3 days amounting to 192.33 Kg / cm2 with an effect of -6.11%, 7 days amounting to 262.14 Kg / cm2with an effect of -3.87%, 28 days at 314.77 Kg / cm2 with an influence of -11.8%, addition of iron sand 3% at 3 days at 207.88 Kg / cm2 with an effect of -14.65 %, 7 days amounting to 262.28 Kg / cm2 with an effect of -4.94%, 28 days at 296.64 Kg / cm2 with influenceat -16.8%, the addition of 4% iron sand at 3 days at 178.06 Kg / cm2 with an effect of -14.97%, 7 days at 236.13 Kg / cm2 with an effect of -10.3% 28 days at 264.58 Kg / cm2 with an effect of -26.2%. based on the results of the study it can be concluded that the more iron sand we use, the more there is a decrease in the concrete compressive strength

Variasi Penambahan Sika Cim Dan Fiber Kawat Pada Beton Mutu Fc’ 30 Mpa

2018 ◽  
Vol 9 (2) ◽  
pp. 67-73
Author(s):  
M Zainul Arifin
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Curing Temperature ◽  
Test Results ◽  
Concrete Compressive Strength ◽  
Normal Concrete ◽  
Astm Method ◽  
Additive Type ◽  
Composition Variation ◽  
Compressive Strength Of Concrete

This research was conducted to determine the value of the highest compressive strength from the ratio of normal concrete to normal concrete plus additive types of Sika Cim with a composition variation of 0.25%, 0.50%, 0.75%, 1.00%, 1.25%, 1 , 50% and 1.75% of the weight of cement besides that in this study also aims to find the highest tensile strength from the ratio of normal concrete to normal concrete in the mixture of sika cim composition at the highest compressive strength above and after that added fiber wire with a size diameter of 1 mm in length 100 mm with a ratio of 1% of material weight. The concrete mix plan was calculated using the ASTM method, the matrial composition of the normal concrete mixture as follows, 314 kg / m3 cement, 789 kg / m3 sand, 1125 kg / m3 gravel and 189 liters / m3 of water at 10 cm slump, then normal concrete added variations of the composition of sika cim 0.25%, 0.50%, 0.75%, 1.00%, 1.25%, 1.5%, 1.75% by weight of cement and fiber, the tests carried out were compressive strength of concrete and tensile strength of concrete, normal maintenance is soaked in fresh water for 28 days at 30oC. From the test results it was found that the normal concrete compressive strength at the age of 28 days was fc1 30 Mpa, the variation in the addition of the sika cim additive type mineral was achieved in composition 0.75% of the cement weight of fc1 40.2 Mpa 30C. Besides that the tensile strength test results were 28 days old with the addition of 1% fiber wire mineral to the weight of the material at a curing temperature of 30oC of 7.5%.

Utilization of Cockle Shell (Anadara Granosa) as Partial Replacement of Fine Aggregates in Concrete

2021 ◽  
Vol 6 (2) ◽  
pp. 96-103
Author(s):  
Ranno Marlany Rachman ◽  
Try Sugiyarto Soeparyanto ◽  
Edward Ngii
Keyword(s):  
Compressive Strength ◽  
National Standard ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Concrete Compressive Strength ◽  
Concrete Technology ◽  
Normal Concrete ◽  
Fine Aggregates ◽  
Blood Clam ◽  
Anadara Granosa

This research aimed to utilize Anadara Granosa (Blood clam shell) clamshell waste as a new innovation in concrete technology and to investigate the effect of Anadara Granosa clamshell powder utilization as an aggregate substitution on the concrete compressive strength. The sample size was made of cylinders with a size of 10 cm x 20 cm with variations of clamshell powder 10%, 20% and 30% from the fine aggregate volume then soaked for 28 days as per the method of the Indonesian National Standard. The evaluation results exhibited that the slump value exceeded the slump value of normal concrete with a slump value of 0% = 160 mm, 10% = 165 mm, 20% = 180 mm and 30% = 180 mm. Additionally, it was found that the concrete compressive strength obtained post 28 days were 20.78 Mpa, 21.95 Mpa, 21.17 Mpa and 24.28 Mpa for normal concrete (0%), substitution concrete (10%), substitution concrete (20%) and substitution concrete (30%), respectively. Leading on from these results, it was concluded that the increment of Anadara Granosa clamshell powder substitution led to the increase of concrete compressive strength test.

scholarly journals Pengaruh Pemanfaatan Abu Tumbuhan Perumpung Terhadap Peningkatan Kuat Tekan Beton K300

Jurnal Tekno ◽  
2021 ◽  
Vol 18 (2) ◽  
pp. 11-20
Author(s):  
Ahmad Junaidi ◽  
R Dewo Hiraliyamaesa Hariyanto
Keyword(s):  
Compressive Strength ◽  
Test Object ◽  
Concrete Mixture ◽  
Wild Plant ◽  
Concrete Compressive Strength ◽  
Normal Concrete ◽  
Compressive Strength Of Concrete ◽  
Test Objects

Perumpung (Eulalia japonica) is a wild plant that usually grows on the banks of river. The locals consider this plant as a waste/pest, but the authors are interested in researching perumpung because they are similar to bamboo, sugarcane and other fibrous plants. In this study, the authors aims to compare the compressive strength of normal concrete with the compressive strength of concrete added with Perumpung ash at 28-days-old K-300. The study used a cube-shaped test object (15 x 15 x 15 cm) with 6 samples for each condition. The total number of test objects is 48, which consists of 8 conditions, namely normal conditions and 5%, 7.5%, 10%, 12.5%, 15%, 17.5% and 20% addition of perumpung ash by cement weight. The results obtained that the compressive strength of 28-days-old concrete under normal conditions was 316,060 kg/cm2 and the addition of 5% ash was 331.583 kg/cm2, 7.5% was 337.181 kg/cm2, 10% was 341.813 kg/cm2, 12 ,5% is 347,045 kg/cm2, 15% is 353,889 kg/cm2, 17.5% is 311,160 kg/cm2 and 20% is 298.44 kg/cm2. From the results above it can be concluded that the addition of 15% Perumpung Ash to the concrete mixture increases the maximum characteristic concrete compressive strength by 353.889 kg/cm2.

scholarly journals Penggunaan Limbah Nikel Sebagai Material Subtitusi Agregat Kasar Pada Beton K.250

2021 ◽  
Vol 2 (1) ◽  
pp. 29-36
Author(s):  
Muhammad Muhsar ◽  
Abdul Kadir ◽  
Sulaiman Sulaiman
Keyword(s):  
Compressive Strength ◽  
Los Angeles ◽  
Specific Gravity ◽  
Moisture Content ◽  
Concrete Compressive Strength ◽  
Normal Concrete ◽  
Test Standards ◽  
Volume Weight ◽  
Concrete Mixtures ◽  
Compressive Strength Of Concrete

The purpose of this study was to Analyze the characteristics of theaggregates used in concrete mixtures and analyze how muchincrease in compressive strength of concrete with a variation ofnickel slag substitution 0%, 5%, 15%, 25% compared with normalconcrete. The characteristics of the material examined are watercontent, sludge content, specific gravity and absorption, volumeweight, abrasion with los angeles machines, and filter analysis.While the large increase in compressive strength of concrete can betested at the age of 7 days, 14 days, 28 days and 35 days. From the results of the analysis of the characteristics of nickel slagwaste in concrete mixes meet the test standards in concretemixtures, with a moisture content of 0.86%, sludge content of 0.44%,specific gravity of 2.94 gr / cm3, volume weight of 1.76 gr / cm3,abrasion 36.07%. And a large increase in compressive strength ofconcrete with a variation of nickel slag substitution of 0%, 5%, 15%,25% compared to normal concrete is increasing. The highestpercentage increase in concrete compressive strength is found inconcrete compressive strength between a variation of 15% with avariation of 25% at 14 days concrete age, with a percentage increasein value of 13.13%.

scholarly journals PEMANFAATAN LIMBAH GYPSUM BOARD DAN BATU BATA MERAH UNTUK SUBSTITUSI SEMEN PADA PEMBUATAN BETON

2019 ◽  
Vol 2 (2) ◽  
pp. 333
Author(s):  
Didik Hadi Prayogo ◽  
Ahmad Ridwan ◽  
Sigit Winarto
Keyword(s):  
Compressive Strength ◽  
Building Blocks ◽  
New Materials ◽  
Concrete Compressive Strength ◽  
Gypsum Board ◽  
Normal Concrete ◽  
Compressive Strength Test ◽  
Average Compressive Strength ◽  
Main Material

Concrete is one of the most vital building blocks, from columns, bricks, paving to roads made of concrete, so the use of concrete tends to be high. Concrete is often used as the main buffer in a building, so good quality is needed, but this is not accompanied by a declining quality of the material, so it requires innovation in the addition of new materials that can at least reduce the needs of the main material for making concrete, one of which is the utilization of Gypsum Board waste and red brick waste. The results of testing the concrete compressive strength test with the addition of Gypsum Board waste and red brick waste to cement obtained pretty good results. Concrete, which has the highest average compressive strength than normal concrete, has concrete with a mixture of red brick and gypsum waste of 10% each with a compressive strength of 250.56 kg / cm², and which has the lowest compressive strength have concrete with a mixture of red bricks and gypsum waste 15% each with a compressive strength of 195.56 kg / cm².Beton merupakan salah satu unsur penyusun bangunan paling vital mulai dari kolom,bata, paving hingga jalan terbuat dari beton sehingga penggunaan beton cenderung tinggi. Beton sering digunakan sebagai bahan penyangga utama pada suatu bangunan maka diperlukan kualitas yang baik, namun hal tersebut tidak di sertai dengan kualitas bahan yang kian menurun,makadiperlukan inovasi penambahan bahan baru yang setidaknya dapat mengurangi kebutuhan bahan utama pembuat beton, salah satunya pemanfaatan limbah Gypsum Board dan limbah batu bata merah Hasil dari pengetesan uji kuat tekan beton dengan penambahan limbah Gypsum Board dan limbah batu bata merah terhadap semen didapatkanhasil yang cukup bagus Beton yang memiliki nilai kuat tekan rata-rata paling tinggi selain beton normal di miliki beton dengan campuran batu bata merah dan limbah gypsum masing-masing 10% dengan nilai kuat tekan sebesar 250,56 Kg/cm²,dan yang memiliki nilai kuat tekan paling rendah di miliki beton dengan campuran batu bata merah dan limbah gypsum masing-masing 15% dengan nilai kuat tekan 195,56 Kg/cm².

scholarly journals PENGARUH GENANGAN AIR TERHADAP PENGECORAN BETON IN-SITU

2018 ◽  
Vol 14 (2) ◽  
pp. 158-168
Author(s):  
Aminullah Aminullah
Keyword(s):  
Compressive Strength ◽  
Pulse Velocity ◽  
Test Machine ◽  
Concrete Compressive Strength ◽  
Normal Concrete ◽  
Waterlogged Condition ◽  
Frame Work ◽  
Building Project ◽  
Mixed Concrete

ABSTRACTHigh rainfall intensity maybe occur during the dry season. This can certainly disturb the erection of a building project, especially in a case of construction works requiring dry condition, such in concrete item. Various attempts have been made to reduce the height of the puddle, when mixing the fresh concrete in a frame work of sub-structure elements, e.g. the foot-plate foundation. The puddles in the foundry area potentially affect the composition of the mortar especially in water-cement ratio (wcr). This caused a decrease of compressive strength (f’c) of the concrete then causing the quality decreaseof the concrete. This research used two types of mixed concreteconditions: dry and waterlogged condition. The water cement ratioshould be changed when mixing concrete had been performed in waterlogged condition. One determinedcontrol sample was based on a normal concrete mixture with characteristic strength (f'c) = 25 MPa. The standard of concrete mixing used is SNI-2834-2000 on the mixingprocedure of a normal concrete mixed design. The concrete sampleswere tested using a concrete compressor universal test machine (UTM) than comparedto hammer and Ultra Pulse Velocity (UPV) test.Based on the results of the study, the quality of mixed concrete in waterlogged conditions was much lower than the compressive strength design. The percentage reduction in compressed strength of mixed concrete under water submerged conditions ranged from 30.82% to 32.63% to normal concrete compressive strength. The higher level of puddlecaused the lower compressive strength of the concrete.There was a match between the measurements of concrete compressive strength using UTM comparedto hammer and UPV tests.The percentage differences in measurement of hammer test to UTM test results were 10.73% and 9.26% to 21.79% by the UPV test. Keywords: concrete, foot plate, mix design, puddle, wcr Intesitas hujan yang cukup tinggi juga dapat terjadi pada musim kemarau. Hal ini tentu dapat mengganggu pelaksanaan suatu pekerjaan bangunan, khususnya pekerjaan konstruksi yang telah disyaratkan untuk dikerjakan dalam kondisi kering.  Berbagai macam upaya telah dilakukan untuk mengurangi tinggi genangan air pada saat pengecoran elemen sub-structure, seperti halnya pondasi telapak (foot-plate). Genangan air yang terdapat pada daerah pengecoran berpotensi mempengaruhi komposisi adukan khususnya pada faktor air semen (fas). Hal tersebut dapat mengakibatkan kuat tekan beton (f’c) berkurang sehingga mengakibatkan mutu beton menjadi berkurang. Kajian ini menggunakan dua jenis kondisi pengecoran, yaitu: kondisi kering dan kondisi pada genangan air. Faktor air semen berubah seiring dengan kegiatan pengecoran beton dalam kondisi basah (tergenang air).  Satu buah sampel kontrol telah ditentukan berdasarkan adukan beton normal dengan kekuatan karakteristik (f’c) = 25 MPa. Standar pencampuran beton yang digunakan adalah SNI-2834-2000 tentang tata cara pembuatan rencana campuran beton normal. Sampel beton akan diuji dengan alat kuat tekan beton yang dilengkapi dengan dial ekstensometer sehingga dapat diperoleh kurva tegangan-regangan beton berdasarkan variasi fas yang diberikan. Berdasarkan hasil penelitianmaka kualitas beton yang dicor dalam kondisi tergenang air jauh lebih rendah dari nilai kuat tekan beton desain,  Persentase penurunan kuat tekan beton yang dicor dalam kondisi terendam air berkisar antara 30,82% sampai dengan 32,63% terhadap kuat tekan beton normal,  Semakin tinggi genangan air maka semakin rendah kuat tekan beton, Terdapat kesesuaian antara pengukuran kuat tekan beton menggunakan UTM  dengan uji hammer dan UPV, Persentase perbedaan pengukuran uji hammer terhadap hasil uji UTM adalah 10,73% dan 9,26% sampai dengan Kualitas beton yang dicor dalam kondisi tergenang air jauh lebih rendah dari nilai kuat tekan beton desain,  Persentase penurunan kuat tekan beton yang dicor dalam kondisi terendam air berkisar antara 30,82% sampai dengan 32,63% terhadap kuat tekan beton normal,  Semakin tinggi genangan air maka semakin rendah kuat tekan beton, Terdapat kesesuaian antara pengukuran kuat tekan beton menggunakan UTM  dengan uji hammer dan UPV, Persentase perbedaan pengukuran uji hammer terhadap hasil uji UTM adalah 10,73% dan 9,26% sampai dengan21,79% untuk uji UPV.Kata kunci: beton, foot plate, genangan, campuran

scholarly journals The Effect of Curing Methods on Compressive Strength of Concrete

2021 ◽  
Vol 921 (1) ◽  
pp. 012007
Author(s):  
M Tumpu ◽  
Irianto ◽  
H Parung
Keyword(s):  
Compressive Strength ◽  
Fresh Water ◽  
Water Immersion ◽  
Treatment Method ◽  
Major Effect ◽  
Concrete Compressive Strength ◽  
Normal Concrete ◽  
Average Value ◽  
Curing Methods ◽  
Curing Method

Abstract Concrete curing is an effort made to optimize the results of concrete casting. This action needs to be done because it has a major effect on the quality and strength of the concrete, one of which is so that the concrete does not lose moisture too quickly, because later this condition will lead to excessive shrinkage in the concrete. As a result, the concrete can experience cracks. This will cause the construction work to be less qualified and endanger construction users. The purpose of this study is to determine the effect of concrete treatment methods on the value of normal concrete compressive strength. Concrete curing can be carried out by several methods according to the type and condition of the structural elements to be treated. From the results of the study, it was found that the curing method of concrete had an effect on the value of normal concrete compressive strength, namely that the average compressive strength value in the fresh water immersion treatment method was 23.730 MPa, the treatment method for wrapping concrete with gunny sacks was 22.349 MPa, the treatment method of wrapping concrete with plastic is 22.306 MPa, and in the treatment method of pouring concrete with fresh water is 21.199 MPa. The average value of the maximum compressive strength occurred in the treatment method with fresh water immersion, namely 23.73 MPa, and the minimum compressive strength value that occurred was found in the treatment method with fresh water sprinkling, namely 21.199 MPa. Thus, that concrete curing is good, namely, by soaking the concrete with fresh water.

scholarly journals TINJAUAN KUAT TEKAN BETON DENGAN MENGGUNAKAN SERAT BENDRAT SEBAGAI BAHAN TAMBAH

2019 ◽  
Vol 1 (2) ◽  
pp. 124-132
Author(s):  
Hermansyah ◽  
Moh Ihsan Sibgotuloh
Keyword(s):  
Compressive Strength ◽  
Fresh Concrete ◽  
Mix Design ◽  
Test Results ◽  
Concrete Compressive Strength ◽  
Normal Concrete ◽  
Fiber Concrete ◽  
Concrete Mix ◽  
Materials Used ◽  
Average Compressive Strength

The more widespread use of concrete construction and the increasing scale of construction, the higher the demand for materials used in concrete mixes. One of the innovations of concrete is fiber concrete. Hope the addition of fiber in concrete mixes such as wire fiber to increase the compressive strength value of normal concrete that is often used, so the purpose of this study is to determine the effect of adding wire fiber to the ease of working (workability) of the concrete mixture and to determine the effect of adding wire fiber to concrete compressive strength. In this study, the fiber used is the type of wire fiber with a diameter of 1 mm and a length of 60 mm. Fiber variations used are 0%, 0.4%, 0.6% and 0.8% based on the weight of fresh concrete. Concrete mix (mix design) using SNI 03-2834-2000 about concrete mix planning with a test life of 28 days. The test results showed that the lowest average compressive strength of 12,291 MPa occurred at 0% variation and the highest average compressive strength value of 20,656 MPa at 0.8% fiber variation. The increase is caused by the even distribution of fibers in the concrete produced, the higher the variation that is given by the fiber, the better the fiber spread, from these fibers provide a fairly good contribution to the fiber concrete

scholarly journals Lightweight Concrete With Mixed Foam Agent, Polymer and Bonding to Reach 300 Kg/Cm²

2020 ◽  
Vol 3 (1) ◽  
pp. 55-63
Author(s):  
Siti Rukmayani Japar ◽  
Freedy Kurniawan
Keyword(s):  
Compressive Strength ◽  
Specific Gravity ◽  
Lightweight Concrete ◽  
Agent Technology ◽  
Efficiency Coefficient ◽  
Light Weight ◽  
Normal Concrete ◽  
Earthquake Effect ◽  
Concrete Quality

Lightweight concrete is very much developed because of its benefits that can reduce the weight of the building itself, so that the earthquake effect on buildings can be minimized. By using Foam Agent Technology, it will add air pores which can reduce the specific gravity of normal concrete. To achieve the K 300 Concrete Quality with Light Weight, the researchers added Polymer and Polymer and Bonding mixture to the Concrete mixture using Foam Agent technology. From the research conducted by researchers, it was found that Foam Agent is able to help concrete become lighter by 13%. This research was also able to obtain the optimum compressive strength results with a light weight, the Light Concrete study with the addition of Foam Agent, Polymer and Bonding with a quality of 267 kg / cm² or equivalent to Fc 22 with a weight of 1877 Kg / cm³ and an efficiency coefficient of 14% which is higher than normal Concrete K 300 with a magnitude of 13%.

Sign in / Sign up

Export Citation Format

Share Document