Analysis Mixed Layer Asphalt Surface as Asbuton Ac-Wc Characteristics of Marshall

Natural asphalt is asphalt obtained somewhere in nature, and can be used as obtained or with little processing. No natural asphalt obtained in the mountains like asphalt in Buton island called Asbuton. Asphalt Buton island is a mixture of bitumen material with other mineral materials in the form of rocks. Because asbuton is so sajaa material found in nature, the levels of bitumen dikandungnyaa greatly varies from low to high. To overcome this, then asbuton began to be produced in various forms at the processing plant asbuton. To reduce the use of natural asphalt eat more steps to do research on utilizing asbuton with the composition 6%, 8%, 10%. The purpose of this study is 1.) Determine the material characteristics LGA Asbuton can meet the specifications of Highways in 2018 on a mix of AC-WC 2.) Determine the value of Optimum Asphalt Content on asphalt concrete AC-WC (Asphalt Concrete - Wearing Course) with extra material LGA Asbuton 3.) Knowing how the performance of asphalt concrete AC-WC with additional material and bitumen 60/70 Asbuton terms of Marshall Test. The study was conducted with an experimental method through laboratory testing. The expected benefits of this research is the discovery of optimizing the use of Asbuton for at the time of execution of the work of new road construction or road maintenance and provide alternative natural aggregate material consumption to a minimum.The test results for the optimum bitumen content KAO on the composition 1 Asbuton 6% with a variation of bitumen (5.05% 5.55% 6.05% 6.55% 7.05%) of the chart can be found KAO Marshall 6.2%. Composition 2 Asbuton 8% with a variation of asphalt (5.0% 5.5% 6.0% 6.5% 7.0%) on the graph can be found KAO Marshall 6.3%. Composition 3 Asbuton 10% with a variation of asphalt (5.0% 5.5% 6.0% 6.5% 7.0%) on the graph can be found KAO Marshall 6.4%. Variations in the composition of 6%, 8% and 10% meet all the requirements of the properties of hot asphalt mix can specification of Highways in 2018.

Comparison of System Methods (Table Form) With Semi Systems from Cost Aspects in the Apartment Meikarta Project

Meikarta Apartment Project at the beginning of the implementation of the method that is used is a formwork system so that the spring mounting groove formwork and casting becomes inhibited. With some consideration, the formwork method was changed from the Semi si stem method to the System (Table Form). Therefore an analysis of costs and time in formwork planning is carried out in order to obtain effective and efficient planning results. At this stage begins with field observations, literature studies include information gathering, problem formulation activities, primary and secondary data and data analysis processing with the Analysis of SNI Work Unit Price (AHS-SNI) 2018 To produce the price of formwork work which includes wages, materials and tool. Based on the results of the analysis carried out on each formwork method, it was concluded that the Cost of Formwork System Work (Table Form) is cheaper compared to Semi system. The total cost of work using the Semi system as much as Rp. 4,837,286,252.27 While using formwork System (Table Form) as much as Rp. 3,724,594,795.77. This shows that work using the System (Table Form) is cheaper by Rp. 1,112,691,456.50 or around 23%.

The Influence of Current Ratio, Debt to Equity Ratio, And Total Asset Turnover Ratio on Profitability of Transportation Companies Listed On the Indonesia Stock Exchange 2014-2018

This study aims to analyze whether there are simultaneous effects of Current Ratio, Debt to Equity Ratio, and Total Asset Turnover to Pofitability (Return On Asset) on Transportation Company Listed at Indonesia Stock Exchanged. This research use quantitative method. The population on this research is transportation companies listed at Indonesia Stock Exchange (IDX) and continuously published financial reports in 2014-2018. Based on the purposive sampling method, from 71 transportation companies globally converged into 10 transportation companies, so that the data obtained were 50 observation. The analytical method used is multiple linear regression analysis. The results of the study are Current Ratio and Debt to Equity Ratio does not partially affect ROA, while Total Asset Turnover has a partial effect on ROA. And the three independent variables (CR, DER and TATO) simultaneously influence the dependent variable, namely profitability (ROA)

Return On Asset (Roa) Analysis Using Du Pont System Method In PT. Ultrajaya Milk Industry And Trading Company Tbk” (2015-2018 Period)

The purpose of this study was to determine the value of the company's Return On Assets (ROA) using Du Pont System method. Du Pont System is an integrated approach to financial ratio analysis that combines the ratio of TATO activity with profit ratio, profit margin on the sale of NPM which shows both interacting in determining ROA. The research method used in this research is descriptive method, with data collection techniques carried out by means of documentation. Based on the results of data analysis, shows the value of ROA at PT. Ultrajaya Milk & Trading Company Tbk which is calculated using the Du Pont System analysis is not good, with a value of ROA that has decreased from 2016 by 16.7%, in 2017 amounting to 13.9% and 2018 by 12.6%. This is due to the decrease in the value of NPM and TATO because basically the value of ROA is influenced by NPM and TATO. So that the value of ROA at PT. Ultrajaya Milk Industry & Trading Company Tbk which is calculated using the Du Pont System method is still not effective due to a tendency to decrease ROA value.

Analysis of Crop Pattern Plant and Irrigation Water Needs in Pauh Tinggi Irigation Network Planning, Pauh Tinggi Village, Kerinci District, Jambi

Pauh Tinggi irrigation network planning which has an area of irrigation land of 473 ha. This irrigation plan draws water from the Pauh Tinggi Dam located in the Batanghari Hulu river, Kerinci Regency, Jambi. Population growth which is directly proportional to the increasing necessities of life, one of which is in the food sector, has made the government take the initiative to meet the needs and welfare of the community by opening land into productive areas of rice fields and fields, and making irrigation plans. In making irrigation planning, hydrological and rainfall calculations are needed to be able to make the right cropping system for farmers in Pauh Tinggi Village, Kerinci Regency, Jambi. A calculation of 17 alternative cropping patterns with different types of plant variants and different plans for the initial planting period were carried out by comparing with the mainstay debit factor (Q80). It was found that the cropping pattern is very possible always using the RICE-RICE-CROP cropping pattern. The most efficient and optimal planting pattern is the alternative planting pattern 14 in the form of RICE -RICE-CORN with Netto Field Water Requirements in tertiary plots (NFR tertiary) ranging from 0 - 1.30 ltr / sec / ha with a maximum of 1.30 ltr / sec / ha in January I, while irrigation water needs in the intake (DR intake) range 0 - 1.60 ltr sec / ha with a maximum of 1.60 ltr / sec / ha in January I.

Cost and Time Performance Analysis with Concept of Earned Value (Case Study Jakarta - Cikampek II Elevated Project)

The research procedure starts with conducting a literature study, collecting data, and summarizing the results of gathering existing data. The purpose of this study is to evaluate the deviation of costs and time, calculate the estimated cost and time needed to complete the project work, calculate the estimated profit or loss that may occur in the completion of the project. Variants emphasized here are to investigate deviations in costs or planned schedules that have been planned or determined. The results of the analysis in Jakarta-Cikampek II Elevated Project stated that in July 2019 the SPI value was 0.96 <1 which could be interpreted that the project progress had been delayed and the CPI value was 1.44> 1 which could be interpreted that the actual the project cost is still smaller than the total budget cost. Estimated total costs up to the end of the project in the amount of Rp.2,694,413,965,781 of the total budget cost of Rp. 3,872,143,387,752 can save Rp.1,177,729,421,971. As for the estimated time to finish until the end of the project which is for 918 days from the time of the 915 day contract, there will be a delay of 3 days.

Analysis of Customer Satisfaction on Quality of Jakarta Corridor MRT (Mass Rapid Transit) Service 1 (Lebakbulus Station - Bundaran HI)

Seeing the very high mobility behavior of the Jakarta people and difficult to avoid congestion, it is appropriate, a solution that invites people to move from private vehicles to mass transportation modes such as the Jakarta MRT. The transportation service industry is an interesting sector to observe because Jakarta MRT is relatively new transportation in Jakarta. This study aims to determine the level of passenger satisfaction with the quality of Jakarta Corridor 1 MRT services (Lebak bulus Station - HI Roundabout) reviewed using the questionnaire method, using 100 respondents taken randomly from Lebak Bulus to the HI Roundabout and vice versa. To get the results of customer satisfaction required data on the average rating of respondents and the results obtained an average value above 3 and included in the category of very satisfied according to the CSI table. To get data that needs to be a priority to be improved and data that needs to be maintained the level of service quality needs to be tested using the Cartesian diagram of the importance- performance method and the results of data that become priorities for improvement are safety aspects at trains and stations as well as courtesy of officers. To test the results of the analysis conducted a validity test using the bivariate correlation method to measure the validity and invalidity of the data with a significance value of 1% and R tables obtained at 0.258 and 100% validity results (all valid data), reliability testing to measure the level of consistency of respondents in filling out the questionnaire from the SPSS program counting process gets the result that the questionnaire has a high level of consistency.

Lightweight Concrete With Mixed Foam Agent, Polymer and Bonding to Reach 300 Kg/Cm²

Lightweight concrete is very much developed because of its benefits that can reduce the weight of the building itself, so that the earthquake effect on buildings can be minimized. By using Foam Agent Technology, it will add air pores which can reduce the specific gravity of normal concrete. To achieve the K 300 Concrete Quality with Light Weight, the researchers added Polymer and Polymer and Bonding mixture to the Concrete mixture using Foam Agent technology. From the research conducted by researchers, it was found that Foam Agent is able to help concrete become lighter by 13%. This research was also able to obtain the optimum compressive strength results with a light weight, the Light Concrete study with the addition of Foam Agent, Polymer and Bonding with a quality of 267 kg / cm² or equivalent to Fc 22 with a weight of 1877 Kg / cm³ and an efficiency coefficient of 14% which is higher than normal Concrete K 300 with a magnitude of 13%.

Acceptance, Effectiveness and Relationship of Blended Learning Implementation Among Lecturers in Polytechnic Sultan Mizan Zainal Abidin

Blended learning is one of the key pedagogical approaches being used in Higher Education Institutions in Malaysia. The latest e-learning technology has obvious potential in making polytechnics more competitive at the same time capable in producing good quality graduates and ready to compete in educational services globally. The main objective of this study is to identify the level of acceptance and impact of Blended Learning among lecturers in Polytechnic Sultan Mizan Zainal Abidin. Relative and non-dependent variable factors were used to test whether the lecturers' acceptance factor determines the level of implementation of this blended learning. A survey was conducted by using a set of questionnaire to collect quantitative data involving 270 respondents representing several academic departments in the Polytechnic of Sultan Mizan Zainal Abidin (PSMZA). The data were analyzed by using Statistical Package for Social Science (SPSS) version 20.0 software to obtain percentage values, frequency and mean scores. A pilot study found that the Alpha Cronbach's alpha was 0.933 and it showed a high level of reliability for the items tested. The scope of this study focuses on the level of acceptance and impact of Blended Learning only. Overall, respondents positively accept Blended Learning as part of learning and teaching process.

Leadership Style in TVET Education Towards 21st Century

Leadership is a critical aspect in organisation. As in 21st century, it’s shown that there are stiff competitions between giant companies to dominate the world economy. Literature shows that their secret of success depends on an open and innovative leadership. Academic leadership should be changed literally to tackle the globalization challenges, in line with technological advances. Leaders can be considered as a goal-setter, advocator, initiator, communicator, supporter, coordinator, coach, evaluator, manager, information provider and role model while implementing changes within the organisation. This study aims to identify leadership style in TVET education by 21st century. The method used for the study is by analyzing and comparing the document with reference from previous review. Identification of theories that uphold leadership style will be the result of this study. This proves the connection between the theories used in this study.