scholarly journals RANCANG BANGUN KOMPONEN UTAMA PLTS OFF-GRID UNTUK MENUNJANG OPERASI INCINERATOR SIPESAT®

2021 ◽  
Vol 20 (2) ◽  
Author(s):  
Noor Hidayati ◽  
Arifia Ekayuliana
Keyword(s):  
Main Parameter ◽  
Solar Panels ◽  
Main Equipment ◽  
Calculation Results ◽  
Vrla Battery

To increase reliability of SIPESAT® Incinerator, off-grid solar powerplant was installed. The aim of this paper is to designing the requirement of the main equipment for the solar powerplant. 270 w, 3 autonomies days were used as the main parameter. GHI gathered from NASA’s data, VRLA battery type with MPPT inverter type was chosen to design the solar powerplant system. based on calculation results, the solar powerplant system need two solar panels 150watt each, and two VRLA battery 24V 200 Ah each,

Optical Performance of Vertical Single-Axis Tracked Solar Panels with Seasonal Adjustment of Tilt-Angles

2011 ◽  
Vol 271-273 ◽  
pp. 45-51
Author(s):  
Run Sheng Tang ◽  
Tian Ming Zhang ◽  
Hao Zhong
Keyword(s):  
Solar Radiation ◽  
Tilt Angle ◽  
Seasonal Adjustment ◽  
Climatic Data ◽  
The Sun ◽  
Optical Performance ◽  
Solar Panels ◽  
Empirical Correlations ◽  
Mathematical Procedure ◽  
Calculation Results

To investigate the optical performance of vertical single-axis tracked solar panels with the tilt-angle of solar panels being seasonally adjusted (4T-V-A tracked solar panels, in short) as compared with fixed and full 2-axis tracked solar panels, a mathematical procedure to estimate the daily collectible radiation on fixed and tracked panels is suggested based on the monthly horizontal radiation. Calculation results showed that the optimal date on which tilt-angle adjustments were seasonally made was about 23 days from the equinoxes, the seasonal optimal tilt-angles of a 4T-V-A tracked solar panel for maximizing seasonal energy collection strongly depended on site latitudes, and the corresponding maximum annual collectible radiation on such tracked panel was about 97% of solar radiation annually collected by a dual-axis tracked panel, slightly higher than that on those tracking the sun about south-north axis inclined at a yearly fixed tilt-angle from the horizon. Empirical correlations for a quick estimation of seasonal optimal tilt-angle of vertical single-axis tracked solar panels were also proposed based on climatic data of 32 sites in China.

scholarly journals STUDI KELAYAKAN PEMBANGKIT LISTRIK TENAGA SURYA UNTUK PENERANGAN DI LOKASI WISATA PANTAI GEMAH TULUNGAGUNG JAWA TIMUR

INFO-TEKNIK ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 155
Author(s):  
Pondi Udianto ◽  
Asrori Asrori ◽  
Eko Yudianto
Keyword(s):  
Renewable Energy ◽  
Electric Energy ◽  
Electrical Energy ◽  
South Coast ◽  
Solar Panels ◽  
The South ◽  
Total Load ◽  
Calculation Results ◽  
Generating Capacity ◽  
In Series

The condition of electric energy at Gemah beach on the south coast of Tulungagung has not been fully supplied by PLN, so it is necessary to take advantage of renewable energy. This study aims to calculate the need for electrical energy at Gemah beach and calculate the number of solar panels and the required generating capacity. From the calculation results obtained: Total load energy per day 17392 Wh, Total load Ah requirement per day = 362 Ah, and need battery with capacity = 1358 Ah, capacity of selected battery in Amp-hour is 800 Ah, batteries in parallel is 2, Number of batteries in series = 24, Total number of batteries = 48, capacity of total battery is 1600 Ah, Total kilowatt-hour capacity of battery = 76.8 kWh. Meanwhile, for the purposes of generation required: The number of solar modules to meet the load requirements = 28 modules. Generating capacity = 5.6 kWp, rounded off to 6 kWp

scholarly journals Arduino-Based Battery Voltage Monitoring and SMS Gateway

2020 ◽  
Vol 2 (3) ◽  
pp. 111
Author(s):  
Muhammad Setiawan ◽  
Riky Dwi Puriyanto
Keyword(s):  
Standard Deviation ◽  
The State ◽  
Voltage Sensor ◽  
State Of Charge ◽  
Solar Panels ◽  
Battery Voltage ◽  
Voltage Sensors ◽  
Measured Voltage ◽  
Monitoring Process ◽  
Vrla Battery

This study aims to monitor the value of the voltage on the battery using a voltage sensor and using the State of Charge method to estimate the charged power of the VRLA battery remotely by utilizing SMS Gateway-based technology so that checking is no longer necessary. The results obtained are displayed on the smartphone in the form of an SMS. To determine the SOC in a 12V VRLA battery, it is calculated based on the number of each cell. VRLA 12V has 6 cells, each cell consisting of 2V to 2.4Volt. The capacity of a VRLA battery in 1 cell is declared 100% full at a voltage of 2.3 volts. So that data is obtained to determine the full percentage of the VRLA 12V 6 cell battery with a capacity of 7.2Ah, namely 13.8V. Experiments were carried out using solar panels, VRLA batteries, voltage sensors, Arduino UNO, and GSM SIM900A modules. This study succeeded in reading the measured voltage value with the sensor, and obtained an error value of 0.20 and a standard deviation of 0.02, and for the monitoring process to run smoothly without problems.

SISTEM AUTOMATIC SWITCH REDUNDANT UPS UNTUK BEBAN ESSENSIAL

2019 ◽  
Vol 5 (1) ◽  
pp. 35-45
Author(s):  
Markus Dwiyanto Tobi ◽  
Alimuddin Mappa
Keyword(s):  
Power Supply ◽  
Working Condition ◽  
Control Circuit ◽  
Energy Sources ◽  
Main Equipment ◽  
Telecommunication Equipment ◽  
Input Condition ◽  
Research Designs ◽  
Switch Circuit

The role of the power supply device is to produce, process and distribute energy sources. Telecommunication equipment can only operate if it has continuous supply. Therefore, to maintain the continuity of the supply, a UPS (Uninterruptable Power Supply) device system is needed so that the supply to the Essential Load device will remain available so that continuity will be maintained. This research designs and proposes how a series of automatic redundant switch systems on UPS to ensure the availability of power supply for the main equipment of telecommunications systems. The Auto switch circuit is designed to have 3 (three) working stages which will trigger the relay driver as control circuit, namely the normal working condition of the contactor input K1 is present, the input condition is zero (lost), and the input condition is present. This system can automatically supply power to telecommunications equipment.

Tax maneuver in the oil industry: Provisional results and risks for further implementation

2020 ◽  
pp. 28-43
Author(s):  
A. S. Kaukin ◽  
E. М. Miller
Keyword(s):  
Oil Industry ◽  
Oil Products ◽  
Oil Refining ◽  
State Budget ◽  
Tax Rate ◽  
Oil Companies ◽  
Reform Plan ◽  
Alternative Variant ◽  
Calculation Results ◽  
The Cost

The paper analyzes the consequences of the abolition of the export duty on oil and oil products as a necessary step to stimulate energy efficiency of Russia’s economy and eliminate underdevelopment provoked by a long-term subsidizing of inefficient oil refining sector in Russia. The calculation results have shown that even taking into account several deviations from the planned scenarios of changing the parameters of tax regulation of the oil industry in 2014— 2019, the tax maneuver brought over 3.5 trillion rubles (in 2019 — 148 billion rubles) to the state budget in 2014—2017, mainly due to an increase in the base mineral extraction tax rate, and contributed to an increase in the depth of oil refining from 72% to 85%. In addition, the article analyzes possible risks associated with the current plan for reforming the taxation of the industry until 2024 and proposes an alternative that could level some of them. A comparative analysis of the effects of the tax maneuver under the current reform plan and the alternative variant suggests that the latter will allow to achieve a greater total budgetary effect in four years, reduce the cost of subsidizing domestic oil refining, increase the efficiency of Russian vertically integrated oil companies, and reduce the growth rate of oil products prices in the retail market.

Pengaruh konsep diri, self efficacy dan motivasi terhadap Learning outcome mata pelajaran Aqidah Akhlak di kelas XI MA Pacet Mojokerto

2017 ◽  
Vol 1 (1) ◽  
pp. 37
Author(s):  
Happy Ikmal
Keyword(s):  
Learning Outcomes ◽  
Significant Relationship ◽  
Self Efficacy ◽  
Teaching And Learning ◽  
Regression Coefficient ◽  
T Test ◽  
Self Concept ◽  
Working Hypothesis ◽  
Calculation Results ◽  
The Right

Teaching and learning activities is a conscious activity and aims. Therefore, for these activities can be run well and achieve the expected goals, it must be done with the strategy or the right learning approach .. The purpose of this study were: 1) to describe the influence of Self-Concept on the results of studying chemistry at Class XI MA Pacet Mojokerto. 2) Describe the effect of self-efficacy on Learning outcomes chemistry in Class XI MA Pacet Mojokerto 3) Describe the effect of motivation on Learning outcomes chemistry in Class XI MA Pacet Mojokerto 4) Describe the relationship Self-concept, self-efficacy and motivation to Results studied chemistry at Class XI MA Pacet Mojokerto. From the results of the analysis can be summarized as follows: 1) There is a significant relationship between self-concept of the Learning outcomes chemistry inquiry model. T test against self-concept variables (X1) obtained regression coefficient (B) 0.440 (44.0%), coefficient (Beta) 0.091, tcount of 0.378 with significance 0.006 t. Because of the significance of t less than 5% (0.007 <0.05), the Nil Hypothesis (H0) is rejected and working hypothesis (Hi) is received. 2) There is a significant relationship between self-efficacy toward chemistry Learning outcomes inquiry model. T test for Self-efficacy variable (X2) obtained regression coefficient (B) 0.329 (32.9%), coefficient (Beta) 0.124, tcount of 0.436 with a significance of 0.009 t. Because of the significance of t less than 5% (0.008 <0.05), the Nil Hypothesis (H0) is rejected and working hypothesis (Hi) is received. 3) There is a significant relationship between motivation to learn chemistry results inquiry model. T test for motivation variable (X3) obtained regression coefficient (B) 0.130 (13.0%), coefficient (Beta) 0.065, tcount of 0.230 with a significance of 0.001 t. Because of the significance of t less than 5% (0.001 <0.05), the Nil Hypothesis (H0) is rejected and working hypothesis (Hi) received 4) From the calculation results obtained Fhitung value 2,249 (significance F = 0.001). So Fhitung> F table (2,249> 2:03) or Sig F <5% (0.001 <0.05). It means that together independent variables consisting of variable self-concept (X1), Self-efficacy (X2), motivation (X3) simultaneously to variable results of studying chemistry (Y).

Penentuan Metode Intensitas Hujan Berdasarkan Karakteristik Hujan dari Stasiun Pengamat Hujan Disekitar Kecamatan Karawang Timur

2019 ◽  
Vol 5 (1) ◽  
Author(s):  
Melisa Permatasari ◽  
M. Candra Nugraha ◽  
Etih Hartati
Keyword(s):  
Drainage System ◽  
Daily Rainfall ◽  
Intensity Analysis ◽  
Rain Intensity ◽  
Rainy Period ◽  
Discharge Plan ◽  
Calculation Results ◽  
Value Determination ◽  
Maximum Daily Rainfall ◽  
Method Approach

<p>The rain intensity is the high rainfall in unit of time. The length of rain will be reversed by the amount rain intensity. The shorter time the rain lasts, the greater of the intensity and re-period of its rain. The value of rain intensity is required to calculate the flood discharge plan on the drainage system planning area in East Karawang district. Determining the value rain intensity is required the maximum daily rainfall data obtained from the main observer stations in the Plawad station planning area. The method of determination rain intensity analysis can be done with three methods: Van Breen, Bell Tanimoto and Hasper der Weduwen. Selected method is based on the smallest deviation value. Determination deviation value is determined by comparing rain intensity value of Van Breen method, Bell Tanimoto, Hasper der Weduwen. By comparing rain intensity value of the Van Breen method, Bell Tanimoto, Hasper der Weduwen with the results of calculating three methods through the method approach Talbot, Sherman and Ishiguro. Calculation results show that the method of rain has smallest deviation standard is method Van Breen with Talbot approach for rainy period (PUH) 2, 5, 10, 25, 50 and 100 years.</p>

Analysis of Characteristics of Halogen and LED Automobile Lamps

2020 ◽  
pp. 57-62
Author(s):  
Olga Yu. Kovalenko ◽  
Yulia A. Zhuravlyova
Keyword(s):  
Power Consumption ◽  
Flip Chip ◽  
Weather Conditions ◽  
Luminous Flux ◽  
Luminous Efficacy ◽  
Colour Temperature ◽  
Study Results ◽  
Calculation Results ◽  
Mandatory Rules ◽  
Halogen Lamps

This work contains analysis of characteristics of automobile lamps by Philips, KOITO, ETI flip chip LEDs, Osram, General Electric (GE), Gtinthebox, OSLAMPledbulbs with H1, H4, H7, H11 caps: luminous flux, luminous efficacy, correlated colour temperature. Characteristics of the studied samples are analysed before the operation of the lamps. The analysis of the calculation results allows us to make a conclusion that the values of correlated colour temperature of halogen lamps are close to the parameters declared by manufacturers. The analysis of the study results has shown that, based on actual values of correlated colour temperature, it is not advisable to use LED lamps in unfavourable weather conditions (such as rain, fog, snow). The results of the study demonstrate that there is a slight dispersion of actual values of luminous flux of halogen lamps by different manufacturers. Maximum variation between values of luminous flux of different lamps does not exceed 14 %. The analysis of the measurement results has shown that actual values of luminous flux of all halogen lamps comply with the mandatory rules specified in the UN/ECE Regulation No. 37 and luminous flux of LED lamps exceeds maximum allowable value by more than 8 %. Luminous efficacy of LED lamps is higher than that of halogen lamps: more than 82 lm/W and lower power consumption. The results of the measurements have shown that power consumption of a LED automobile lamp is lower than that of similar halogen lamps by 3 times and their luminous efficacy is higher by 5 times.

Hybrid Lighting Complex for Combined Lighting Systems Research Into Optical Path Optimization Using the Complex "Solar Led-S" New Modification

2018 ◽  
pp. 122-129
Author(s):  
Alexander T. Ovcharov ◽  
Yuri N. Selyanin ◽  
Yaroslav V. Antsupov
Keyword(s):  
Light Transmission ◽  
Optical Path ◽  
Artificial Light ◽  
Solar Panels ◽  
Shopping Centre ◽  
Systems Research ◽  
Lower Stage ◽  
Input Structure ◽  
Lighting Systems ◽  
Two Stages

A new concept of the architecture of hybrid lighting systems for installations of combined lighting is considered. The cascade principle of constructing the optical path of such complexes is described, in which the design contains two stages of the cascade: the upper and lower stages. The upper (input) structure is made on the basis of the corresponding modification of the hollow tube “Solatube®” (daylight), and the lower one, based on the “Solatube®” fibre of a larger diameter, is combined with LED artificial light block and is designed to transmit mixed light (daylight and artificial light). The results of studies on the efficiency of light transmission made it possible to optimize the solution of the new modification of the hybrid lighting complex “Solar LED”, lower stage of the cascade, and to develop the nomenclature of the production line “S”. The description of the first experience of using this complex in the pilot combined illumination system of the “meeting room” in the shopping centre “IKEA Belaya Dacha” headquarters is given. A completely autonomous power supply system for a lighting installation based on solar panels has been implemented.

Pengaruh Pengembangan Karir dan Penempatan Kerja Terhadap Prestasi Kerja Karyawan pada PDAM Tirtanadi Provinsi Sumatera Utara

MBIA ◽  
2019 ◽  
Vol 17 (3) ◽  
pp. 17-24
Author(s):  
Cut Ermiati ◽  
Dita Amanah ◽  
Dedy Ansari Harahap ◽  
Fitriani Tanjung
Keyword(s):  
Data Analysis ◽  
Career Development ◽  
Linear Regression ◽  
Work Performance ◽  
Total Population ◽  
Employee Performance ◽  
Work Placement ◽  
Analysis Technique ◽  
Calculation Results ◽  
North Sumatra

This study aims to determine the effect of career development and work placement on employee work performance at PDAM Tirtanadi, North Sumatra Province. The population in this study were all employees per division, amounting to 182 employees. From the total population can be determined the number of samples in this study amounted to 65 people. The data analysis technique used is the t-test, f-test, multiple linear regression and determinant coefficient test using SPSS 22. From the calculation results using SPSS shows that there is an influence of career development on employee work performance, there is the influence of work placement on employee performance and there is the influence of career development and work placement on employee performance.

Sign in / Sign up

Export Citation Format

Share Document