scholarly journals Structural Analysis of Network Connections of Koleje Małopolskie sp. z o.o. as a Significant Element of the Management of the Transport Company

Author(s):  
Paweł Sobczak

Public transport is one of the most important elements of the economy and social space development in which it is located. Issues related to its proper organisation are very often the responsibility of transport companies, which must operate and carry out their activities within the principles of the economy, that is, the principles of managing a service company. An important element of an efficient and effective functioning of a transport company is the quality of the provided services. An element significantly affecting the quality of the services offered is, inter alia, an appropriately organised network of connections offered by the carrier. This network in an efficient and interference-resistant manner must facilitate transport in a given area. In the article, using the graph theory and the simulation method, the structure of network connections of a railway carrier operating in the Małopolska region (Koleje Małopolskie sp. z o.o.) in Poland was analysed. The aim of the analysis was to obtain information about the current condition and parameters of the network offered by the carrier. Theconducted analysis made it possible to assess the current state as well as within the conducted research and it proposed to modify the existing network of connections in order to improve its parameters. The carrier’s network is used, inter alia, to co-create public transport in the region, and the structure of the connections network and its appropriate planning can have a significant impact on the functioning of the company.

2014 ◽  
Vol 635 ◽  
pp. 190-193
Author(s):  
Janette Brezinová ◽  
Dagmar Draganovská ◽  
Anna Guzanová ◽  
Marek Vojtko

The contribution deals with the evaluation of wear blades continuous blasting machine. The current state of wear of blades and a description of the blasting process is analyzed. In the experimental part of this work the quality of the blades is evaluated by measuring the hardness of materials, chemical analysis of the samples and their structural analysis. Abrasive wear was evaluated in loose fill abrasive and in the environment with firmly bonded abrasives. The results of the measurements showed that the material of the blades is hypoeutectic white cast iron with different carbon and alloying, especially Chromium.


2021 ◽  
Vol 18 (5) ◽  
pp. 122-139
Author(s):  
G. A. Chernova ◽  
M. V. Velikanova ◽  
V. A. Kokshilov

The article considers organisation of transportation services for passengers with public transport followed by their quality assessment in conformity with the requirements of the social standard. The objective of the article is to determine quality of passenger transportation by a municipal passenger enterprise with buses of large and medium capacity and by individual entrepreneurs carrying out transportation with minibuses. The article uses reporting materials on transportation of passengers by municipal and private carriers. To achieve the purpose, quality indicators of passenger transportation by public transport were calculated using the methodology of the social standard approved by the Ministry of Transport of the Russian Federation. The number of points for each indicator defined by the social standard for municipal carriers and individual entrepreneurs is determined, the results of relevant calculations are presented. The analysis of quality of passenger transportation services provided by municipal and private carriers was carried out. The quantitative characteristics of quality indicators values made it possible to determine the current state of passenger transportation services, identify shortcomings and make a forecast for improving quality of services. To improve quality of passenger transportation services, measures were proposed for bodies responsible for transportation and carriers.


2017 ◽  
Vol 13 ◽  
pp. 244-261
Author(s):  
Mariola Tracz ◽  
Małgorzata Bajgier-Kowalska ◽  
Radosław Uliszak

Podkarpackie Voivodeship is one of the regions of Poland in which the number of agritourism entities is very high. Therefore tourism plays a significant role in its development strategy. The aim of the paper is to identify the current state of agritourism and the changes that have occurred in the region in the years 2000–2016. Specific objectives are to determine the distribution of agritourism farms and their offer, together with a comprehensive analysis of the environmental and socio-economic factors, as well as the impact of the Slovak-Ukrainian border. The report was developed on the statistical materials from the Polish Central Statistical Office, Podkarpackie Agricultural Advisory Centre in Boguchwała and data collected from municipalities and district offices that is published on their websites, as well as through interviews with 100 owners of agritourism farms in the Podkarpackie Voivodeship. The research has shown, on the one hand, the decline in the number of farms in the region and, on the other hand, the increase in the diversity of the tourist offer of these entities. Distribution of agritourism farms is closely linked to the attractiveness of natural environment and quality of secondary tourism resources. Traditional agritourism has not yet fully used its countryside, as well as cross-border advantages of its location.


Author(s):  
Olha Pavlenko

The article discusses the current state of professional training of engineers, in particular, electronics engineers in Ukrainian higher education institutions (HEIs) and explores best practices from US HEIs. The research outlines the features of professional training of electronics engineers and recent changes in Ukrainian HEIs. Such challenges for Ukrainian HEIs as lack of collaboration between higher education and science with industry, R&D cost reduction for HEIs, and downsizing the research and academic staff, the disparity between the available quality of human capital training and the demanded are addressed. The study attempts to identify successful practices of US HEIs professional training of engineers in order to suggest potential improvements in education, research, and innovation for training electronics engineers in Ukraine.


Author(s):  
Shalini S ◽  
Ravichandran V ◽  
Saraswathi R ◽  
BK Mohanty ◽  
Dhanaraj S K

 Aspire of the Drug Utilization Studies (DUS) is to appraise factors related to the prescribing, dispensing, administering and taking of medication, and it’s associated. Since the middle of twentieth century, interest in DUS has been escalating, first for market-only purposes, then for appraising the quality of medical prescription and comparing patterns of use of specific drugs. The scope of DUS is to evaluate the current state and future trends of drug usage, to estimate roughly disease pervasiveness, drug expenditures, aptness of prescriptions and adherence to evidence-based recommendations. The increasing magnitude of DUS as a valuable investigation resource in pharmacoepidemiology has been bridging it with other health allied areas, such as public health, rational use of drug, evidence based drug use, pharmacovigilance, pharmacoeconomics, eco-pharmacovigilance and pharmacogenetics.


2020 ◽  
Vol 961 (7) ◽  
pp. 2-7
Author(s):  
A.V. Zubov ◽  
N.N. Eliseeva

The authors describe a software suite for determining tilt degrees of tower-type structures according to ground laser scanning indication. Defining the tilt of the pipe is carried out with a set of measured data through approximating the sections by circumferences. They are constructed using one of the simplest search engine optimization methods (evolutionary algorithm). Automatic filtering the scan of the current section from distorting data is performed by the method of assessing the quality of models constructed with that of least squares. The software was designed using Visual Basic for Applications. It contains several blocks (subprograms), with each of them performing a specific task. The developed complex enables obtaining operational data on the current state of the object with minimal user participation in the calculation process. The software suite is the result of practical implementing theoretical developments on the possibilities of using search methods at solving optimization problems in geodetic practice.


Author(s):  
Florian Kuisat ◽  
Fernando Lasagni ◽  
Andrés Fabián Lasagni

AbstractIt is well known that the surface topography of a part can affect its mechanical performance, which is typical in additive manufacturing. In this context, we report about the surface modification of additive manufactured components made of Titanium 64 (Ti64) and Scalmalloy®, using a pulsed laser, with the aim of reducing their surface roughness. In our experiments, a nanosecond-pulsed infrared laser source with variable pulse durations between 8 and 200 ns was applied. The impact of varying a large number of parameters on the surface quality of the smoothed areas was investigated. The results demonstrated a reduction of surface roughness Sa by more than 80% for Titanium 64 and by 65% for Scalmalloy® samples. This allows to extend the applicability of additive manufactured components beyond the current state of the art and break new ground for the application in various industrial applications such as in aerospace.


i-Perception ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 204166952110203
Author(s):  
Jonas K. Olofsson ◽  
Ingrid Ekström ◽  
Maria Larsson ◽  
Steven Nordin

Olfaction, the sense of smell, is characterized by a notable age-dependency such that aging individuals are more likely to have poor olfactory abilities. These impairments are considered to be mostly irreversible and as having potentially profound effects on quality of life and food behavior, as well as constituting warning signs of mortality, cognitive dysfunction, and dementia. Here, we review the current state of research on aging and olfaction, focusing on five topics which we regard to be of particular relevance for the field: nutrition and health, cognition and dementia, mortality, environment and genetics, and training-based enhancement. Under each of these headlines, we provide a state-of-the-art overview and discuss gaps in our knowledge which might be filled by further research. Understanding how olfactory abilities are diminished in aging, and how they may be alleviated or recovered, involves a set of challenging tasks for researchers in the years to come.


Electronics ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 567
Author(s):  
Donghun Yang ◽  
Kien Mai Mai Ngoc ◽  
Iksoo Shin ◽  
Kyong-Ha Lee ◽  
Myunggwon Hwang

To design an efficient deep learning model that can be used in the real-world, it is important to detect out-of-distribution (OOD) data well. Various studies have been conducted to solve the OOD problem. The current state-of-the-art approach uses a confidence score based on the Mahalanobis distance in a feature space. Although it outperformed the previous approaches, the results were sensitive to the quality of the trained model and the dataset complexity. Herein, we propose a novel OOD detection method that can train more efficient feature space for OOD detection. The proposed method uses an ensemble of the features trained using the softmax-based classifier and the network based on distance metric learning (DML). Through the complementary interaction of these two networks, the trained feature space has a more clumped distribution and can fit well on the Gaussian distribution by class. Therefore, OOD data can be efficiently detected by setting a threshold in the trained feature space. To evaluate the proposed method, we applied our method to various combinations of image datasets. The results show that the overall performance of the proposed approach is superior to those of other methods, including the state-of-the-art approach, on any combination of datasets.


Sign in / Sign up

Export Citation Format

Share Document