scholarly journals Immobilization of Candida antarctica B (CALB) in Silica Aerogel: Morphological Characteristics and Stability

2020 ◽  
Vol 10 (6) ◽  
pp. 6744-6756 ◽  
Keyword(s):  
Sol Gel ◽  
Morphological Characteristics ◽  
Amorphous Structure ◽  
Industrial Applications ◽  
Candida Antarctica ◽  
Type Iv ◽  
Wide Range ◽  
The Stability ◽  
Immobilized Calb ◽  
Candida Antarctica B

Enzymes have been extensively used due to their catalytic properties, and immobilization is a promising technique to enhance their catalytic activity and stability. Lipases are enzymes naturally efficient, can be employed for the production of many different molecules, and have a wide range of industrial applications thanks to their broad selectivity. The objective of the present study was to characterize the Candida antarctica B CALB immobilized obtained using the aerogel technique regarding the morphological characteristics of the aerogel silica and its stability. For this purpose, analyzes of XRD, adsorption-desorption isotherms, TGA, SEM, and stability (storage, operational, and thermal) were performed. The supports obtained have an amorphous structure and isotherm type IV. Regarding TGA, two distinct regions were obtained and studied. Aerogels showed an increase in thermal, storage, and operational stability in relation to the free enzyme and demonstrated between 8 and 12 cycles of reuse. The contribution of this work was to present the stability advantages of the immobilized CALB enzyme through the sol-gel technique.

scholarly journals Photocatalytic Activity Enhancement of Low-pressure Cold-Sprayed TiO2 Coatings Induced by Long-term Water Vapor Exposure

2021 ◽  
Author(s):  
Seremak Wioletta ◽  
Baszczuk Agnieszka ◽  
Jasiorski Marek ◽  
Gibas Anna ◽  
Winnicki Marcin
Keyword(s):  
Titanium Dioxide ◽  
Photocatalytic Activity ◽  
Water Vapor ◽  
Sol Gel ◽  
Low Pressure ◽  
Oxygen Depletion ◽  
Amorphous Structure ◽  
Industrial Applications ◽  
Additional Parameter

AbstractThis work shows that the titanium dioxide coatings obtained by low-pressure cold gas spraying with the use of the sol–gel amorphous TiO2 powder are characterized by photocatalytic activity despite their partial amorphous content. Moreover, the research outcome suggests that the decomposition rate of organic pollutants is enhanced after long-term exposure to moisture. The condensation humidity test is not detrimental to the continuity and integrity of the coating, but the phase composition of coatings changes—with the exposure to water vapor, the portion of the amorphous phase crystallizes into brookite. The mechanism responsible for the conversion of amorphous TiO2 into brookite is attributed to the water-driven dissolution and reprecipitation of TiO6 octahedra. It has been shown that an additional parameter necessary for the stabilization of the brookite is the oxygen depletion of the amorphous structure of titanium dioxide. Considering the results presented in this paper and the advantages of a portable, low-pressure cold spray system for industrial applications, it is expected that TiO2 coatings produced from a sol–gel feedstock powder can be further developed and tested as efficient photocatalysts.

scholarly journals Electrochemical Comparison of SAN/PANI/FLG and ZnO/GO Coated Cast Iron Subject to Corrosive Environments

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2239 ◽  
Author(s):  
Muhammad Ahmed ◽  
Muhammad Shahid ◽  
Zulfiqar Khan ◽  
Ameen Ammar ◽  
Abdul Saboor ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Crude Oil ◽  
Produced Water ◽  
Electrochemical Impedance ◽  
Hybrid Composites ◽  
Sol Gel ◽  
Industrial Applications ◽  
Nanocomposite Coatings ◽  
Wide Range ◽  
Corrosive Environments

ZnO/GO (Graphene Oxide) and SAN (Styrene Acrylonitrile)/PANI (Polyaniline)/FLG (Few Layers Graphene) nanocomposite coatings were produced by solution casting and sol-gel methods, respectively, to enhance corrosion resistance of ferrous based materials. Corrosive seawater and ‘produced crude oil water’ environments were selected as electrolytes for this study. Impedance and coating capacitance values obtained from Electrochemical Impedance Spectroscopy (EIS) Alternating Current (AC technique) showed enhanced corrosion resistance of nanocomposites coatings in the corrosive environments. Tafel scan Direct Current (DC technique) was used to find the corrosion rate of nanocomposite coating. SAN/PANI/FLG coating reduced the corrosion of bare metal up to 90% in seawater whereas ZnO/GO suppressed the corrosion up to 75% having the impedance value of 100 Ω. In produced water of crude oil, SAN/PANI/FLG reduced the corrosion up to 95% while ZnO/GO suppressed the corrosion up to 10%. Hybrid composites of SAN/PANI/FLG coatings have demonstrated better performances compared to ZnO/GO in the corrosive environments under investigation. This study provides fabrication of state-of-the-art novel anti corrosive nanocomposite coatings for a wide range of industrial applications. Reduced corrosion will result in increased service lifetime, durability and reliability of components and system and will in turn lead to significant cost savings.

Study of Drying Conditions of the Aerogel Obtained by the Sol-Gel Technique for Immobilization In Situ of Lipase Candida antarctica B

2019 ◽  
Vol 15 (6) ◽  
pp. 350-356 ◽  
Author(s):  
Aline Matuella Moreira Ficanha ◽  
Angela Antunes ◽  
Carolina Elisa Demaman Oro ◽  
Alice Teresa Valduga ◽  
Cícero Matuella Moreira ◽  
...  
Keyword(s):  
Sol Gel ◽  
Candida Antarctica ◽  
Gel Technique ◽  
Drying Conditions ◽  
Candida Antarctica B

scholarly journals ENZYMATIC PRODUCTION OF ETHYL OLEATE ESTER USING A LIPASE FROM CANDIDA ANTARCTICA B

2012 ◽  
Vol 2 ◽  
pp. 21
Author(s):  
N. Sampaio Neta ◽  
J. A. C. Cunha ◽  
S. O. Sancho ◽  
R. F. A. Abreu ◽  
D. F. Pontes ◽  
...  
Keyword(s):  
Oleic Acid ◽  
Sodium Sulfate ◽  
Ethyl Oleate ◽  
Reaction Times ◽  
Candida Antarctica ◽  
Enzymatic Esterification ◽  
Type B ◽  
Enzymatic Production ◽  
Wide Range ◽  
Candida Antarctica B

Lipases are biocatalysts of great importance in different areas, being able to catalyze reactions in aqueous or organic media. Furthermore, these enzymes are capable of using several substrates being stable in a wide range of pH and temperatures. Lipases promote the esterification between fatty acids and ethanol producing oleate esters. The aim of this work is to produce ethyl oleate ester by enzymatic esterification of oleic acid with ethanol. A lipase from Candida antarctica type B was used at a temperature of 55 °C. The reaction was conducted using oleic acid, sodium sulfate anhydrous, lipase and ethanol, with a ratio of oleic acid (0.03 mol or 10 ml), lipase (0.1 mol or 0.01 g), sodium sulfate anhydrous (5 g) and ethanol 99 % (100 ml). Several reaction times were studied, namely 48, 72, 96 and 120 hours. Nuclear Magnetic Resonance (1H and 13C) and Infrared spectra confirmed the production of ethyl oleate ester for the studied conditions. The highest ethyl oleate production yield was obtained for 96 hours reaction time. Ethyl oleate esters have been reported to possess interesting applications in several industrial fields, such as food, aromatics, cosmetics, detergents, flavors and pharmaceuticals.

scholarly journals Physical Ageing of The Research Reactor Core Structural Materials Due To Neutron Irradiation Exposure: A Review

2017 ◽  
Vol 18 (2) ◽  
pp. 93
Author(s):  
Julwan Hendry Purba
Keyword(s):  
Neutron Irradiation ◽  
Nuclear Reactor ◽  
Research Reactor ◽  
Reactor Core ◽  
Structural Materials ◽  
Industrial Applications ◽  
Physical Ageing ◽  
Functional Capabilities ◽  
Wide Range ◽  
The Stability

A research reactor (RR) is a nuclear reactor that has function to generate and utilize neutron flux and radiation ionization for research purposes and industrial applications. More than 60% of current operating RRs have been operated for 30 years or more. As the time passes, the functional capabilities of structures, systems and components (SSCs) of those RRs deteriorate by physical ageing, which can be caused by neutron irradiation exposure such as irradiation induced dislocation and microstructural changes. To extend the lifetime and/or to avoid unplanned outages, ageing on the safety related SSCs of RRs need to be properly managed. An ageing management is a strategy to engineer, operate, maintenance, and control SSC degradation within acceptablelimits. The purpose of this study is to review physical ageing of the core structural materials of the RRs caused by neutron irradiation exposure. In order to achieve this objective, a wide range of literatures are reviewed. Comprehensive discussions on irradiation behaviors are limited only on reactor vessel and core support structure materials made from zirconium and beryllium as well as their alloys, which are widely used in RRs. It is found that the stability of the mechanical properties of zirconium and beryllium as well as their alloys was mostly affected by the neutron fluences and temperatures.

Microstructural characterization of sol-gel coating on PET films

1994 ◽  
Vol 52 ◽  
pp. 886-887
Author(s):  
R. T. Chen ◽  
R.A. Norwood
Keyword(s):  
Ion Beam ◽  
Sol Gel ◽  
Industrial Applications ◽  
Hard Coatings ◽  
Nanometer Scale ◽  
Ion Beam Sputtering ◽  
Process Technology ◽  
Refractive Index Measurement ◽  
Organically Modified ◽  
Pet Films

Sol-gel processing has been used to control the structure of a material on a nanometer scale in preparing advanced ceramics and glasses. Film coating using the sol-gel process was also found to be a viable process technology in applications such as optical, porous, antireflection and hard coatings. In this study, organically modified silicate (Ormosil) coatings are applied to PET films for various industrial applications. Sol-gel materials are known to exhibit nanometer scale structures which havepreviously been characterized by small-angle X-ray scattering (SAXS), neutron scattering and light scattering. Imaging of the ultrafine sol-gel structures has also been performed using an ultrahigh resolution replica/TEM technique. The objective of this study was to evaluate the ultrafine structures inthe sol gel coatings using a direct imaging technique: atomic force microscopy (AFM). In addition, correlation of microstructures with processing parameters, coating density and other physical properties will be discussed.The materials evaluated are organically modified silicate coatings on PET film substrates. Refractive index measurement by the prism coupling method was used to assess density of the sol-gel coating.AFM imaging was performed on a Nanoscope III AFM (by Digital Instruments) using constant force mode. Solgel coating samples coated with a thin layer of Ft (by ion beam sputtering) were also examined by STM in order to confirm the structures observed in the contact type AFM. In addition, to compare the previous results, sol-gel powder samples were also prepared by ultrasonication followed by Pt/Au shadowing and examined using a JEOL 100CX TEM.

UV Curable Organic-Inorganic Hybrid Materials

2000 ◽  
Vol 628 ◽  
Author(s):  
Guang-Way Jang ◽  
Ren-Jye Wu ◽  
Yuung-Ching Sheen ◽  
Ya-Hui Lin ◽  
Chi-Jung Chang
Keyword(s):  
Hybrid Materials ◽  
Colloidal Silica ◽  
Sol Gel ◽  
Solution Ph ◽  
Uv Curable ◽  
Inorganic Hybrid ◽  
Degradation Temperature ◽  
Sol Gel Process ◽  
The Stability ◽  
Thermal Degradation Temperature

This work successfully prepared an UV curable organic-inorganic hybrid material consisting of organic modified colloidal silica. Applications of UV curable organic-inorganic hybrid materials include abrasion resistant coatings, photo-patternable thin films and waveguides. Colloidal silica containing reactive functional groups were also prepared by reacting organic silane and tetraethyl orthosilicate (TEOS) using sol-gel process. In addition, the efficiency of grafting organic moiety onto silica nanoparticles was investigated by applying TGA and FTIR techniques. Experimental results indicated a strong interdependence between surface modification efficiency and solution pH. Acrylate-SiO2 hybrid formation could result in a shifting of thermal degradation temperature of organic component from about 200°C to near 400°C. In addition, the stability of organic modified colloidal silica in UV curable formula and the physical properties of resulting coatings were discussed. Furthermore, the morphology of organic modified colloidal silica was investigated by performing TEM and SEM studies‥

Performance of Electronic Structure Methods for the Description of Hückel-Möbius Interconversions in Extended π-Systems

2019 ◽  
Author(s):  
Tatiana Woller ◽  
Ambar Banerjee ◽  
Nitai Sylvetsky ◽  
Xavier Deraet ◽  
Frank De Proft ◽  
...  
Keyword(s):  
Electronic Structure ◽  
Basis Set ◽  
Dft Methods ◽  
Molecular Switching ◽  
Wide Range ◽  
Electronic Structure Methods ◽  
Explicitly Correlated ◽  
Relative Errors ◽  
The Stability ◽  
Basis Set Expansion

<p>Expanded porphyrins provide a versatile route to molecular switching devices due to their ability to shift between several π-conjugation topologies encoding distinct properties. Taking into account its size and huge conformational flexibility, DFT remains the workhorse for modeling such extended macrocycles. Nevertheless, the stability of Hückel and Möbius conformers depends on a complex interplay of different factors, such as hydrogen bonding, p···p stacking, steric effects, ring strain and electron delocalization. As a consequence, the selection of an exchange-correlation functional for describing the energy profile of topological switches is very difficult. For these reasons, we have examined the performance of a variety of wavefunction methods and density functionals for describing the thermochemistry and kinetics of topology interconversions across a wide range of macrocycles. Especially for hexa- and heptaphyrins, the Möbius structures have a pronouncedly stronger degree of static correlation than the Hückel and figure-eight structures, and as a result the relative energies of singly-twisted structures are a challenging test for electronic structure methods. Comparison of limited orbital space full CI calculations with CCSD(T) calculations within the same active spaces shows that post-CCSD(T) correlation contributions to relative energies are very minor. At the same time, relative energies are weakly sensitive to further basis set expansion, as proven by the minor energy differences between MP2/cc-pVDZ and explicitly correlated MP2-F12/cc-pVDZ-F12 calculations. Hence, our CCSD(T) reference values are reasonably well-converged in both 1-particle and n-particle spaces. While conventional MP2 and MP3 yield very poor results, SCS-MP2 and particularly SOS-MP2 and SCS-MP3 agree to better than 1 kcal mol<sup>-1</sup> with the CCSD(T) relative energies. Regarding DFT methods, only M06-2X provides relative errors close to chemical accuracy with a RMSD of 1.2 kcal mol<sup>-1</sup>. While the original DSD-PBEP86 double hybrid performs fairly poorly for these extended p-systems, the errors drop down to 2 kcal mol<sup>-1</sup> for the revised revDSD-PBEP86-NL, again showing that same-spin MP2-like correlation has a detrimental impact on performance like the SOS-MP2 results. </p>

Substituent Effects on the Thermal Decomposition of Phosphate Esters on Ferrous Surfaces

2019 ◽  
Author(s):  
James Ewen ◽  
Carlos Ayestaran Latorre ◽  
Arash Khajeh ◽  
Joshua Moore ◽  
Joseph Remias ◽  
...  
Keyword(s):  
Thermal Decomposition ◽  
Film Formation ◽  
Substituent Effects ◽  
Vapour Phase ◽  
Industrial Applications ◽  
Phosphate Esters ◽  
Antiwear Additives ◽  
Formation Mechanisms ◽  
Phosphate Ester ◽  
Wide Range

<p>Phosphate esters have a wide range of industrial applications, for example in tribology where they are used as vapour phase lubricants and antiwear additives. To rationally design phosphate esters with improved tribological performance, an atomic-level understanding of their film formation mechanisms is required. One important aspect is the thermal decomposition of phosphate esters on steel surfaces, since this initiates film formation. In this study, ReaxFF molecular dynamics simulations are used to study the thermal decomposition of phosphate esters with different substituents on several ferrous surfaces. On Fe<sub>3</sub>O<sub>4</sub>(001) and α-Fe(110), chemisorption interactions between the phosphate esters and the surfaces occur even at room temperature, and the number of molecule-surface bonds increases as the temperature is increased from 300 to 1000 K. Conversely, on hydroxylated, amorphous Fe<sub>3</sub>O<sub>4</sub>, most of the molecules are physisorbed, even at high temperature. Thermal decomposition rates were much higher on Fe<sub>3</sub>O<sub>4</sub>(001) and particularly α-Fe(110) compared to hydroxylated, amorphous Fe<sub>3</sub>O<sub>4</sub>. This suggests that water passivates ferrous surfaces and inhibits phosphate ester chemisorption, decomposition, and ultimately film formation. On Fe<sub>3</sub>O<sub>4</sub>(001), thermal decomposition proceeds mainly through C-O cleavage (to form surface alkyl and aryl groups) and C-H cleavage (to form surface hydroxyls). The onset temperature for C-O cleavage on Fe<sub>3</sub>O<sub>4</sub>(001) increases in the order: tertiary alkyl < secondary alkyl < primary linear alkyl ≈ primary branched alkyl < aryl. This order is in agreement with experimental observations for the thermal stability of antiwear additives with similar substituents. The results highlight surface and substituent effects on the thermal decomposition of phosphate esters which should be helpful for the design of new molecules with improved performance.</p>

PLATINUM

Alloy Digest ◽  
1970 ◽  
Vol 19 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
Industrial Applications ◽  
High Melting ◽  
High Melting Point ◽  
White Metal ◽  
Temperature Performance ◽  
Wide Range ◽  
Corrosion And Oxidation

Abstract PLATINUM is a soft, ductile, white metal which can be readily worked either hot or cold. It has a wide range of industrial applications because of its excellent corrosion and oxidation resistance and its high melting point. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Pt-1. Producer or source: Matthey Bishop Inc..

Sign in / Sign up

Export Citation Format

Share Document