scholarly journals Amberlite IR-120 Catalyzed Green and Efficient One-Pot Synthesis of Benzylpyrazolyl Coumarin in Aqueous Medium

2021 ◽  
Vol 10 (3) ◽  
pp. 2525-2534

An efficient, green, and cost-effective synthesis of benzylpyrazolyl coumarin by one-pot four-component condensation of hydrazine hydrate or phenyl hydrazine, ethyl acetoacetate, aromatic aldehyde, and 4-hydroxycoumarin in the presence of Amberlite IR-120 as a catalyst in an aqueous medium has been reported. Shorter reaction time, operation simplicity, low cost of catalyst, and aqueous medium are key advantages of this method for synthesizing benzylpyrazolyl coumarin in moderate to high yield.

2019 ◽  
Vol 16 (8) ◽  
pp. 676-682
Author(s):  
Ankusab Noorahmadsab Nadaf ◽  
Kalegowda Shivashankar

The polycyclic dihydropyridine nucleus represents the heterocyclic system of invaluable core motifs with wide applications in chemical, biological and physical properties. Although this kind of compounds have been extensively synthesized by other groups, the synthesis of these compounds under CFL light intensity were not explored. The synthesis of polycyclic dihydropyridine derivatives were achieved through the reaction of 4-hydroxycoumarin, aromatic aldehydes and ammonium acetate under CFL light irradiation conditions. A series of polycyclic dihydropyridine derivatives were prepared under CFL light irradiation conditions with high yield, short reaction time, ambient condition and without the use of catalyst. The results displayed an efficient method for the synthesis of polycyclic dihydropyridine derivatives. Clean profile, short reaction time, low cost and use of CFL light intensity instead of catalyst making it a genuinely green protocol.


2020 ◽  
Vol 17 ◽  
Author(s):  
Ravi Bansal ◽  
Pradeep K. Soni ◽  
Neha Gupta ◽  
Sameer S. Bhagyawant ◽  
Anand K. Halve

Aims: In this article we have developed an eco-friendly one-pot multi-component reaction methodology was employed for the green synthesis of functionalized pyrazole derivatives viz cyclo-condensation of aromatic aldehydes, ethyl acetoacetate and phenyl hydrazine and/or hydrazine hydrate in the presence of cetyltrimethylammoniumbromide (CTAB) at 90°C temperature in aqueous medium. Method: In the present protocol we developed a green method for the synthesis of functionalized pyrazole derivatives through one-pot, multi-component cyclo-condensation of aromatic aldehydes, phenyl hydrazine or hydrazine hydrate and ethyl acetoacetate using cetyltrimethylammoniumbromide (CTAB) as a catalyst in water as solvent. Our methodology confers advantages such as short reaction time, atom economy, purification of product without using column chromatographic and hazardous solvent. The reaction is being catalyzed by cetyltrimethylammoniumbromide (CTAB) and thus products are formed under the green reaction conditions. Results: Initially the reaction of benzaldehyde and phenylhydrazine with ethyl acetoacetate was carried out in water at room temperature in the absence of the catalyst; no product was obtained after 24 h (Table 1 entry 1). When the reaction was carried out using L-proline as catalyst in ethanol at 70°C the yield of product was 20. Conclusion: This research not only provides a green and efficient method for the synthesis of sulfinic esters but also shows new applications of electrochemistry in organic synthesis. We consider that this green and efficient synthetic protocol used to prepare sulfinic esters will have good applications in future. In conclusion, we have developed successfully a green and efficient one-pot multi-component methodology for the synthesis of substituted pyrazoles using CTAB as a catalyst in water as solvent with excellent yields. Purifications of compounds were achieved without the use of traditional chromatographic procedures. This methodology has advantages of operational simplicity, clean reaction profiles and relatively broad scope which make it more attractive for the diversity oriented synthesis of these heterocyclic libraries. In this methodology we suggest the further alternative possibility for formation of substituted pyrazoles. The compound 7h can be used as an anticancer drug in pharma industry.


Author(s):  
Mohd Azril Riduan ◽  
Mohd Jumain Jalil ◽  
Intan Suhada Azmi ◽  
Afifudin Habulat ◽  
Danial Nuruddin Azlan Raofuddin ◽  
...  

Background: Greener epoxidation by using vegetable oil to create an eco-friendly epoxide is being studied because it is a more cost-effective and environmentally friendly commodity that is safer than non-renewable materials. The aim of this research is to come up with low-cost solutions for banana trunk acoustic panels with kinetic modelling of epoxy-based palm oil. Method: In this study, the epoxidation of palm oleic acid was carried out by in situ performic acid to produce epoxidized palm oleic acid. Results: Banana trunk acoustic panel was successfully innovated based on the performance when the epoxy was applied. Lastly, a mathematical model was developed by using the numerical integration of the 4th order Runge-Kutta method, and the results showed that there is a good agreement between the simulation and experimental data, which validates the kinetic model. Conclusion: Overall, the peracid mechanism was effective in producing a high yield of epoxy from palm oleic acid that is useful for the improvement of acoustic panels based on the banana trunk.


2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Avtar Singh ◽  
Amanjot Kaur ◽  
Anita Dua ◽  
Ritu Mahajan

Xylano-pectino-cellulolytic enzymes are valuable enzymes of the industrial sector. In our earlier study, we have reported a novel and cost effective methodology for the qualitative screening of cellulase-free xylano-pectinolytic microorganisms by replacing the commercial, highly expensive substrates with agricultural residues, but the microorganisms with xylanolytic, pectinolytic, cellulolytic, xylano-pectinolytic, xylano-cellulolytic, pectino-cellulolytic, and xylano-pectino-cellulolytic potential were obtained. The probability of getting the desired combination was low, so efforts were made to further improve this cost effective methodology for obtaining the high yield of the microbes capable of producing desired combination of enzymes. By inclusion of multiple enrichment steps in sequence, using only practically low cost substrates and without any nutrient media till primary screening stage, this improved novel protocol for screening gave only the desired microorganisms with xylano-pectino-cellulolytic activity. Using this rapid, efficient, cost effective, and improved methodology, microbes with required combination of enzymes can be obtained and the probability of getting the desired microorganisms is cent percent. This is the first report presenting the methodology for the isolation of xylano-pectino-cellulolytic positive microorganisms at low cost and consuming less time.


2020 ◽  
Vol 9 (1) ◽  
pp. 919-923

Biginelli, an important multicomponent reaction provides an avenue for the synthesis of different biologically active heterocyclic compounds. During the past decade, one pot multicomponent reactions have attracted the attention of organic and medicinal chemists due to high atom economy, time and enery saving convergent nature. The present manuscript reports a simple one pot three component synthesis of 3, 4-dihydroprimidin-2(1H)-thiones from various diversely substituted aldehydes, ethyl acetoacetate and thiourea using a orange peel powder as a natural catalyst on ultrasonic irradiation in aqueous medium as the solvent. The advantages of this reaction are less reaction time, high yield, easy availability of the catalyst and green nature.


2010 ◽  
Vol 2010 (DPC) ◽  
pp. 000425-000445
Author(s):  
Paul Siblerud ◽  
Rozalia Beica ◽  
Bioh Kim ◽  
Erik Young

The development of IC technology is driven by the need to increase performance and functionality while reducing size, power and cost. The continuous pressure to meet those requirements has created innovative, small, cost-effective 3-D packaging technologies. 3-D packaging can offer significant advantages in performance, functionality and form factor for future technologies. Breakthrough in wafer level packaging using through silicon via technology has proven to be technologically beneficial. Integration of several key and challenging process steps with a high yield and low cost is key to the general adoption of the technology. This paper will outline the breakthroughs in cost associated with an iTSV or Via-Mid structure in a integrated process flow. Key process technologies enabling 3-D chip:Via formationInsulator, barrier and seed depositionCopper filling (plating),CMPWafer thinningDie to Wafer/chip alignment, bonding and dicing This presentation will investigate these techniques that require interdisciplinary coordination and integration that previously have not been practiced. We will review the current state of 3-D interconnects and the of a cost effective Via-first TSV integrated process.


2020 ◽  
Vol 8 (46) ◽  
pp. 16443-16451
Author(s):  
Wendong Yang ◽  
Florian Mathies ◽  
Eva L. Unger ◽  
Felix Hermerschmidt ◽  
Emil J. W. List-Kratochvil

A do-it-yourself silver particle-free ink is presented, which shows good stability, low cost and excellent printability. The ink is formulated in selected alcohols. Highly conductive silver patterns were printed on both glass and flexible substrates.


2020 ◽  
Vol 32 (4) ◽  
pp. 923-929
Author(s):  
J. Sumalatha ◽  
A. Sreedevi ◽  
C. Radha Rani

A facile and an efficient procedure has been developed by one-pot condensation of naphthalene-diols, fluoro substituted benzaldehydes and cyclic 1,3-dicarbonyl compounds for the synthesis of fluorine containing benzo[a]xanthen-11(12H)-ones under the catalyst and solvent-free conditions. All the synthesized compounds were characterized by IR, NMR (1H & 13C) and mass spectrometry. Several advantages offer the present approach, such as, shorter reaction time, low cost, anticipation of toxic solvents and catalyst, higher yield of products and durability of substrate range. On the other hand, anticancer activity was also performed for the title compounds which demonstrated a significant activity on selected cancer cell lines.


2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Aumber Abbas ◽  
Tanveer A. Tabish ◽  
Steve J. Bull ◽  
Tuti Mariana Lim ◽  
Anh N. Phan

AbstractGraphene quantum dots (GQDs), a novel type of zero-dimensional fluorescent materials, have gained considerable attention owing to their unique optical properties, size and quantum confinement. However, their high cost and low yield remain open challenges for practical applications. In this work, a low cost, green and renewable biomass resource is utilised for the high yield synthesis of GQDs via microwave treatment. The synthesis approach involves oxidative cutting of short range ordered carbon derived from pyrolysis of biomass waste. The GQDs are successfully synthesised with a high yield of over 84%, the highest value reported to date for biomass derived GQDs. As prepared GQDs are highly hydrophilic and exhibit unique excitation independent photoluminescence emission, attributed to their single-emission fluorescence centre. As prepared GQDs are further modified by simple hydrothermal treatment and exhibit pronounced optical properties with a high quantum yield of 0.23. These modified GQDs are used for the highly selective and sensitive sensing of ferric ions (Fe3+). A sensitive sensor is prepared for the selective detection of Fe3+ ions with a detection limit of as low as 2.5 × 10–6 M. The utilisation of renewable resource along with facile microwave treatment paves the way to sustainable, high yield and cost-effective synthesis of GQDs for practical applications.


2019 ◽  
Vol 31 (4) ◽  
pp. 829-833
Author(s):  
D.S. Bhagat ◽  
S.G. Pande ◽  
M.V. Katariya ◽  
R.P. Pawar ◽  
P.S. Kendrekar

One-pot efficient protocol to the synthesis of 2-amino-5-oxo-4,5-dihydropyrano(3,2-c)chromene-3-carbonitrile derivatives via condensation of various aryl aldehydes, dicyanomethane and 4-hydroxycoumarin in presence of Emim hydroxide as an excellent homogeneous liquid catalyst. The key advantages of this methodology are mild reaction conditions, novel catalyst, short reaction time, eco-friendly, easy work-up procedure and high yield of isolation of derivatives.


Sign in / Sign up

Export Citation Format

Share Document