scholarly journals Ion Source—Mathematical Simulation Results versus Experimental Data

Aerospace ◽  
2021 ◽  
Vol 8 (10) ◽  
pp. 276
Author(s):  
Victoria V. Svotina ◽  
Maria V. Cherkasova ◽  
Andrey I. Mogulkin ◽  
Andrey V. Melnikov ◽  
Oleg D. Peysakhovich
Keyword(s):  
Experimental Data ◽  
Mathematical Simulation ◽  
Classical Problem ◽  
Ion Source ◽  
Operating Modes ◽  
Urgent Task ◽  
Simulation Results ◽  
Source Operation ◽  
Minimum Divergence ◽  
Contact Free

To develop elements of a system for contact-free transportation of objects in space has now become an urgent task for the contemporary space-related activities. The purpose of work that is presented hereinafter was to conduct ground tests of the ion source, which is a key element of the above-mentioned system, and to compare the obtained experimental data with the mathematical simulation results in order to build a refined physical and mathematical model of the ion source. Such model was built on the basis of the classical problem regarding the motion of charged particles in an electrostatic field. Parameters of the ion source have been determined experimentally for several operating modes using various structural designs of the ion source electrodes. Two types of ion optics were tested—with slit and round apertures. Good correlation between simulation results and experimental data has been demonstrated. The optimum ion source operation modes have been identified to ensure minimum divergence angles for the plasma beam exiting from the ion source, which in its turn maximizes the pulse transmitted to the transported object.

scholarly journals Selection of operating modes of tillage implement with ring working tools by criteria of quality and energy inputs

2020 ◽  
Vol 222 ◽  
pp. 01019
Author(s):  
N.I. Dzhabborov ◽  
A.V. Dobrinov ◽  
A.V. Sergeev ◽  
V.I. Shamonin ◽  
A.N. Perekopskiy
Keyword(s):  
Experimental Data ◽  
Technological Process ◽  
Energy Parameters ◽  
Operating Modes ◽  
Operation Modes ◽  
Energy Inputs ◽  
Urgent Task ◽  
Variation Patterns ◽  
Rational Operation ◽  
Save Energy

Improving the tillage methods, machines and equipment to increase their efficiency is an urgent task. Tillage implements should provide high-quality tillage, save energy and improve the yielding capacity of cultivated crops. The study purpose was to obtain the experimental data, which would reveal the variation patterns of energy parameters and agrotechnical indicators of the tillage implement operation, and to identify the rational operation modes under specific operating environment. The study object was the developed tillage implement with ring working tools PM-2/DK for pre-seeding tillage. The study subject was to obtain the variation patterns in energy and agrotechnical indicators of the designed modification of the tillage implement with the ring working tools teamed with MTZ-920 tractor. The study used the modern methods of theory and experimentation to identify the main quality indicators of the technological process of surface tillage, as well as to determine the energy parameters of the machine, to generalize them, and to analyze the experimental data obtained. The variation patterns of energy and agrotechnical indicators were revealed, the rational operation modes of the tillage implement were justified, namely, working speed V=2.8-3.3 m/s; installation angle of the ring working tools α=15-22°; energy inputs of the technological process Ei = 373.80-431.18 MJ/ha.

BEHAVIORAL MODEL OF A LINEAR VOLTAGE STABILIZER IN THE SPICE LANGUAGE

2019 ◽  
Author(s):  
Aleksey Malahanov
Keyword(s):  
Experimental Data ◽  
Behavioral Model ◽  
Voltage Stabilizer ◽  
Static Mode ◽  
Technical Description ◽  
Simulation Results ◽  
Chip Manufacturer ◽  
Linear Voltage

A variant of the implementation of the behavioral model of a linear voltage stabilizer in the Spice language is presented. The results of modeling in static mode are presented. The simulation results are compared with experimental data and technical description of the chip manufacturer.

Conditions for the Effective Use of Air Curtain on Objects of Agricultural Production

2020 ◽  
Vol 67 (1) ◽  
pp. 54-59
Author(s):  
Aleksey V. Kuz’michev ◽  
Stanislav S. Trunov ◽  
Dmitriy A. Tikhomirov
Keyword(s):  
Agricultural Production ◽  
Theoretical Models ◽  
Research Purpose ◽  
Engineering Practice ◽  
Physical Factors ◽  
Air Curtain ◽  
Operating Modes ◽  
Air Jets ◽  
Urgent Task ◽  
Design Characteristics

Creating and maintaining a microclimate in animal housing is an energy-intensive technological process that consumes up to 70 percent of the thermal energy consumed on cattle farms. Improving heating and ventilation systems aimed at reducing energy consumption is an urgent task. (Research purpose) The research purpose is to analyze the theoretical models for calculating air curtains and evaluate the possibility of their use for agricultural production facilities and to identify promising directions in the design solutions for thermal air curtains aimed at rural consumers. (Materials and methods) The article considers the theoretical justification and calculation of air curtains. The authors studied the physical model of interaction of air jets in openings, which serves as the basis for mathematical calculation of air curtains in engineering practice. The article describes the features of using the models for calculating air curtains for agricultural objects and the energy parameters of the curtains depending on the design characteristics and external environmental factors. (Results and discussion) The effect of the air curtain on the energy characteristics of the room has been studied. It was found that it is necessary to determine the type of air curtain that is optimally suitable for protecting the gate opening, with or without heating the air curtain. Authors have found that the engineering methods of calculation are based on different experimental data, which leads to a discrepancy in the results of evaluating the effectiveness of the designed curtain, overestimating its energy intensity and power. The calculation of heat curtains, operating modes should be carried out taking into account the variable effects of external physical factors, the equipment should correspond to a specific room. (Conclusions) The use of air curtains reduces or eliminates the penetration of external cold air into the room through the openings of external gates, requires a smaller volume of air supplied by the curtain, compared to the mass of the incoming air flow.

scholarly journals Realization of a fractional-order RLC circuit via constant phase element

2021 ◽  
Author(s):  
Riccardo Caponetto ◽  
Salvatore Graziani ◽  
Emanuele Murgano
Keyword(s):  
Experimental Data ◽  
Carbon Black ◽  
Fractional Order ◽  
Constant Phase Element ◽  
Polymeric Matrix ◽  
Fractional Order Systems ◽  
New Device ◽  
Rlc Circuit ◽  
Simulation Results

AbstractIn the paper, a fractional-order RLC circuit is presented. The circuit is realized by using a fractional-order capacitor. This is realized by using carbon black dispersed in a polymeric matrix. Simulation results are compared with the experimental data, confirming the suitability of applying this new device in the circuital implementation of fractional-order systems.

scholarly journals Investigation of the Thickness Differential on the Formability of Aluminum Tailor Welded Blanks

Metals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 875
Author(s):  
Jie Wu ◽  
Yuri Hovanski ◽  
Michael Miles
Keyword(s):  
Experimental Data ◽  
Finite Element ◽  
Numerical Model ◽  
Plastic Strain ◽  
Finite Element Model ◽  
Equivalent Plastic Strain ◽  
Element Model ◽  
Dome Height ◽  
Tailor Welded Blanks ◽  
Simulation Results

A finite element model is proposed to investigate the effect of thickness differential on Limiting Dome Height (LDH) testing of aluminum tailor-welded blanks. The numerical model is validated via comparison of the equivalent plastic strain and displacement distribution between the simulation results and the experimental data. The normalized equivalent plastic strain and normalized LDH values are proposed as a means of quantifying the influence of thickness differential for a variety of different ratios. Increasing thickness differential was found to decrease the normalized equivalent plastic strain and normalized LDH values, this providing an evaluation of blank formability.

Simulation and Productive Practice of 60 Tons Huge Rectangular Ingot by Wind Cooling

2011 ◽  
Vol 233-235 ◽  
pp. 2714-2717
Author(s):  
Xin Gang Ai ◽  
Sheng Li Li ◽  
Dong Wei Zhang ◽  
Nan Lv ◽  
Jun Tao
Keyword(s):  
Mathematical Simulation ◽  
Surface Quality ◽  
Solidification Time ◽  
Special Method ◽  
Cooling Process ◽  
Heavy Plate ◽  
Simulation Results

Huge rectangular ingots becomes crying needs in the condition of lots of heavy plate mills more than 5m have been in operation. In this paper, a special method of wind cooling outside mould has been presented and applied to produce 60t rectangular ingot. Mathematical simulation results tell us that by wind cooling, the solidification time of the 60t ingot can be shortened by 67 minutes, internal soundness can be ensured. The wind cooling process can obviously improve microstructure and preventing skull patch by increasing the thickness of solidified shell. A 60 tons huge rectangular ingot is successfully produced by wind cooling, the surface quality of is very well and the internal soundness should be improved further.

Wear of a Tool in Double-Disk Lapping of Silicon Wafers

2010 ◽  
Author(s):  
Adam Barylski ◽  
Mariusz Deja
Keyword(s):  
Experimental Data ◽  
Integrated Circuits ◽  
Tool Wear ◽  
Silicon Wafers ◽  
Silicon Ingot ◽  
Proposed Model ◽  
Tool Wear Prediction ◽  
Simulation Results ◽  
High Degree ◽  
Kinematical Parameters

Silicon wafers are the most widely used substrates for fabricating integrated circuits. A sequence of processes is needed to turn a silicon ingot into silicon wafers. One of the processes is flattening by lapping or by grinding to achieve a high degree of flatness and parallelism of the wafer [1, 2, 3]. Lapping can effectively remove or reduce the waviness induced by preceding operations [2, 4]. The main aim of this paper is to compare the simulation results with lapping experimental data obtained from the Polish producer of silicon wafers, the company Cemat Silicon from Warsaw (www.cematsil.com). Proposed model is going to be implemented by this company for the tool wear prediction. Proposed model can be applied for lapping or grinding with single or double-disc lapping kinematics [5, 6, 7]. Geometrical and kinematical relations with the simulations are presented in the work. Generated results for given workpiece diameter and for different kinematical parameters are studied using models programmed in the Matlab environment.

The penetration and ricochet of ogive-nosed rigid projectiles obliquely impacting metallic targets

2021 ◽  
pp. 204141962110377
Author(s):  
Yaniv Vayig ◽  
Zvi Rosenberg
Keyword(s):  
Experimental Data ◽  
Numerical Simulations ◽  
Dynamic Pressure ◽  
Oblique Impacts ◽  
Simulation Results ◽  
The Impact ◽  
Penetration Depths ◽  
Resistance To Penetration ◽  
Good Agreement

A large number of 3D numerical simulations were performed in order to follow the trajectory changes of rigid CRH3 ogive-nosed projectiles, impacting semi-infinite metallic targets at various obliquities. These trajectory changes are shown to be related to the threshold ricochet angles of the projectile/target pairs. These threshold angles are the impact obliquities where the projectiles end up moving in a path parallel to the target’s face. They were found to depend on a non-dimensional entity which is equal to the ratio between the target’s resistance to penetration and the dynamic pressure exerted by the projectile upon impact. Good agreement was obtained by comparing simulation results for these trajectory changes with experimental data from several published works. In addition, numerically-based relations were derived for the penetration depths of these ogive-nosed projectiles at oblique impacts, which are shown to agree with the simulation results.

scholarly journals Development of a Novel Hybrid Unified Viscoplastic Constitutive Model

2015 ◽  
Author(s):  
Luis A. Varela J. ◽  
Calvin M. Stewart
Keyword(s):  
Experimental Data ◽  
Stainless Steel ◽  
Hybrid Model ◽  
Material Constant ◽  
Inelastic Behavior ◽  
Hastelloy X ◽  
Material Constants ◽  
Stainless Steel 304 ◽  
Simulation Results ◽  
Optimal Material

Hastelloy X and stainless steel 304 are alloys widely used in industrial gas turbines components, petrochemical industry and energy generation applications; In the Pressure Vessel and Piping (PVP) industries they are used in nuclear and chemical reactors, pipes and valves applications. Hastelloy X and stainless steel 304 are favored for these types of applications where elevated temperatures are preferred for better systems’ efficiencies; they are favored due to its high strength and corrosion resistance at high temperature levels. A common characteristic of these alloys, is its rate-dependent mechanical behavior which difficult the prediction of the material response for design and simulation purposes. Therefore, a precise unified viscoplastic model capable to describe Hastelloy X and stainless steel 304 behaviors under a variety of loading conditions at high temperatures is needed to allow a better and less conservative design of components. Numerous classical unified viscoplastic models have been proposed in literature, to predict the inelastic behavior of metals under extreme environments. Based on Miller and Walker classical unified constitutive models a novel hybrid unified viscoplastic constitutive model is introduced in the present work, to describe the inelastic behavior caused by creep and fatigue effects at high temperature. The presented hybrid model consists of the combination of the best aspects of Miller and Walker model constitutive equations, with the addition of a damage rate equation which provides a description of the damage evolution and rupture prediction capabilities for Hastelloy X and stainless steel 304. A detailed explanation on the meaning of each material constant is provided, along with its impact on the hybrid model behavior. Material constants were calculated using the recently developed Material Constant Heuristic Optimizer (MACHO) software, to ensure the use of the optimal material constants values. This software uses the simulated annealing algorithm to determine the optimal material constants in a global surface, by comparing numerical simulations to an extensive database of experimental data. To validate the capabilities of the proposed hybrid model, numerical simulation results are compared to a broad range of experimental data at different stress levels and strain amplitudes; besides the consideration of two alloys in the present work, would demonstrate the model’s capabilities and flexibility to model multiple alloys behavior. Finally a quantitative analysis is provided to determine the percentage error and coefficient of determination between the experimental data and numerical simulation results to estimate the efficiency of the proposed hybrid model.

Sign in / Sign up

Export Citation Format

Share Document