scholarly journals Impact of Ferment Processing Parameters on the Quality of White Pan Bread

2021 ◽  
Vol 11 (21) ◽  
pp. 10203
Author(s):  
Yulia Borsuk ◽  
Lindsay Bourré ◽  
Kasia McMillin ◽  
Elaine Sopiwnyk ◽  
Stuart Jones ◽  
...  

A controlled fermentation process using straight-grade wheat flour, commercially milled from a grist of Canada Western Red Spring (CWRS) wheat and English wheat, and fresh yeast (Saccharomyces cerevisiae) was found to be effective for developing a naturally derived product (ferment) that could be used for processing bread with the minimum use of dough improvers. The effects of ferment storage, fermentation time, and fermentation temperature on the quality of ferment and bread were evaluated to establish optimal conditions to produce a mature ferment. Trials were conducted on a pilot scale for greater relevance to industrialized bakeries. Ferment was assessed for total titratable acidity (TTA), pH, and viscosity. Breads made with ferment were evaluated for processing parameters, dough properties, and bread quality and compared to a control prepared without ferment. During fermentation, maximum TTA levels in the ferment were achieved at 100 min, then decreased by the end of fermentation, and increased by 24 h of storage at 4 °C. Viscosity was stable during fermentation but decreased by 24 h of storage. Inclusion of ferment resulted in reduced mixing times and improved dough extensibility and crumb softness. Specific loaf volume was not impacted; a slight reduction in crumb brightness and crumb structure was detected. Fermentation for 240 min at 35 °C was determined as optimal with a storage time for 24 h.

2020 ◽  
Vol 9 (11) ◽  
pp. e64091110021
Author(s):  
Anolivia Arruda de Oliveira ◽  
Clara Mariana Gonçalves Lima ◽  
Jorge Pamplona Pagnossa ◽  
Roseane Mendonça de Figueiredo ◽  
Ueslei Bruno Cardoso Medeiros ◽  
...  

Fermented kombucha-based beverages have been gaining many adepts around the world because their consumption is associated with beneficial effects on the intestinal microbiota and in some chronic diseases. However, such effects are related to the quality of the drink in terms of microbiological and physicochemical aspects. This study aimed to develop and analyze the microbiological and physicochemical quality of a grape-flavored kombucha fermented drink. This is a quantitative, descriptive, and laboratory study. For the production of the drink, the first fermentation was conducted for five days. Subsequently, the drink was savored simultaneously with the second fermentation with a containing method that guaranteed anaerobic conditions. The beverage was analyzed on the day of filling (Time 0) and on the third day of fermentation (Time 3), regarding the microbiological aspects (total coliforms, presence of Salmonella spp., lactic and acetic bacteria) and physicochemical (pH, acidity, ºBrix). It was not identified in any of the total coliform, thermotolerant, and Salmonella spp. Regarding lactic acid bacteria, they predominated in Time 3 while acetic bacteria in Time 0. As for the physicochemical parameters, pH values ​​were high during the fermentation process (ranging from 3.5 to 3.78), acidity was constant (7.5%) and a slight reduction was observed for the soluble solids on days 0 and 3 (9.0 and 8.5, respectively). As for microbiological standards, the analyses attested to the satisfactory quality of the drink produced. Regarding the physical-chemical parameters, it was observed that the pH values ​​were above the established by the legislation.


Foods ◽  
2020 ◽  
Vol 9 (2) ◽  
pp. 145 ◽  
Author(s):  
Ye-Eun Hong ◽  
Meera Kweon

The formula and processing parameters for gluten-free rice bread were optimized using a factorial design, including a center point. Gum concentration (GC), water amount (WA), mixing time (MT), and fermentation time (FT) were selected as factors, and two levels were used for each factor: 1 and 2% for GC; 80 and 100 g for WA; 5 and 10 min for MT; and 30 and 60 min for FT. The WA and FT were identified as the most significant factors in determining the quality of gluten-free rice bread with tamarind gum. Thus, the optimized formula and processing conditions for maximizing bread volume and minimizing bread firmness were 1% gum, 100 g water, 5 min MT, and 60 min FT. The addition of an anti-staling enzyme reduced the increase in bread firmness and the enthalpy of starch retrogradation, suggesting its potential for successful application in commercially manufactured rice bread with tamarind gum.


1994 ◽  
Vol 74 (1) ◽  
pp. 71-78 ◽  
Author(s):  
K. R. Preston ◽  
J. E. Dexter

Mill streams and divide flours from a pilot-scale milling of commercially grown No. 1 Canada Western Red Spring wheat were baked by a short (no bulk fermentation) baking procedure at various levels of potassium bromate. The quality of bread produced, measured in terms of loaf volume, loaf volume per unit protein and overall bread score showed a wide range of response to potassium bromate level. Household patent flour and the highly refined reduction flours exhibited relatively little baking response to increasing bromate levels, achieving optimum baking performance between 0 and 50 ppm. The least refined reduction flours required higher bromate levels (80–120 ppm) to achieve maximum response, and also demonstrated a greater relative response than the more refined reduction flours. Baker's patent flour and the most refined break flours responded very strongly to bromate, and required higher levels (100–150 ppm) to attain full response. Poorly refined break flours exhibited the highest bromate requirement (225 ppm). Straight-grade flours of 62, 75 and 79% extraction exhibited very little difference in bromate requirements. It appears that stream selection has limited potential as a means of reducing the bromate requirement of bakery flour prepared from Canada Western Red Spring wheat. Key words: Red spring wheat, milling, baking quality, bread, mill streams, bromate response


Foods ◽  
2019 ◽  
Vol 8 (12) ◽  
pp. 663 ◽  
Author(s):  
Ewa Pejcz ◽  
Radosław Spychaj ◽  
Zygmunt Gil

Irritable bowel syndrome (IBS) is a functional disorder of the gastrointestinal system. Adherence to a low-FODMAP (fermenting oligosaccharides, disaccharides, monosaccharides, and polyols) diet may be one of the solutions in this case. The major FODMAP carbohydrates found in wheat bread are fructans. The objective of this study was to produce wheat bread with a reduced fructans content. Breads were made from light and whole grain flour obtained from common wheat using two methods of dough development—I-stage method with the use of yeast, and II-stage method with the use of yeast and sourdough with a pure culture of Lactobacillus plantarum. Four different fermentation times were tested—60, 90, 120, and 150 min. Afterwards, quality attributes (loaf volume, crust and crumb color, and sensory properties) of the produced breads were evaluated, and the fructans content was determined. The results demonstrated that all the factors influenced the quality of wheat breads, as well as their fructans content. Breads made with the II-stage method and light flour had a lower content of fructans, which was decreased in breads along with extending the time of dough fermentation. The greatest impact on fructans content decrease in wheat bread was ascribed to the use of light flour, the II-stage method of dough development coupled with a dough fermentation time prolongation to 150 min.


2015 ◽  
Author(s):  
◽  
Temitope Deborah Awobusuyi

Vitamin A deficiency (VAD) is a major health problem in sub-Saharan Africa where maize is a staple food. Amahewu, a fermented non-alcoholic,maize-based beverage is a popular drink in southern Africa.The aim of this study is to produce a provitamin A enriched and acceptable amahewu, using provitamin A biofortified maize which can be used to alleviate VAD. The optimal processing parameters for the production of amahewu using provitamin A-biofortified maize were determined. Amahewu samples were prepared with reference to a traditional method by boiling a mixture of maize meal and water (rato:1:7) at 90ᴼC, with occasional stirring, for 15 minutes. The resulting porridge was left to cool to approximately 40ᴼC, before inoculation and fermentation at 37oC. Processing parameters investigated were inoculum types (wheat bran (WB), maize malt (MM) and Lactobacillus mixed starter culture) and inoculum concentration (0.5,1 and 2% (w/w)) and varieties of provitamin A maize (PVAH 62 and PVAH 19). Wheat flour (at 2%) was used as reference inoculum to conform to the traditional practice. White maize amahewu samples processed in the same way as those of provitamin A-biofortified maize were used as references. Provitamin A amahewu samples were produced using the optimized processing parameters and then analysed for nutrient composition, including carotenoids, protein, ash, amino acids, mineral profile and invitro protein digestibility. The consumer acceptability of amahewu samples was evaluated using regular consumers of amahewu (n= 54), who rated the acceptability of the samples on a 9-point hedonic scale (1:disliked extremely, 9:liked extremely). The storage stability of the provitamin A biofortified amahewu samples was assessed by subjecting the samples to different storage conditions: 4ᴼC, 25ᴼC and 37ᴼC. The microbiological quality of the stored samples was monitored by taking samples every day for a period of five days to analyse for the presence of aerobic and anaerobic bacterial spore formers, E.coli and moulds. The provitamin A maize variety did not influence pH and Total titratable acidity (TTA) of amahewu samples during fermentation. As expected, there was a substantial drop in pH with fermentation time. After 24 hours, all the samples of amahewu, including those made with white maize, prepared using malted maize and wheat bran inocula reached a pH of 3.3-3.8 and TTA of 0.3-0.6, which were within acceptable range for amahewu. The addition of a starter culture substantially reduced fermentation time, from 24 to six hours. The inoculum of WB and MM, respectively, at a concentration of 0.5%, with or without starter culture (5%), were found to be suitable for the production of amahewu using provitamin A biofortified maize. The total provitamin A content of amahewu samples, produced using optimised parameters (i.e one variety of provitamin A biofortified maize, 0.5% MM, WB with or without starter culture), ranged from 3.3-3.8 μg/g (DW). The percentage retention of total provitamin A ranged from 79%- 90% (DW). The lowest percentage retention was observed in products fermented with the addition of starter culture. The gross energy of the amahewu samples was approx. 20 MJ/kg. There was a slight increase in the lysine content of amahewu after fermentation. The protein digestibility (approx. 91%) of amahewu samples was slightly higher than that of raw provitamin A maize (86%). Amahewu processed using starter cultures had a slightly higher iron content than those processed without a starter culture. Consumer acceptability data showed that amahewu samples made with provitamin A biofortified maize were slightly more acceptable (average rating for overall acceptability was 7.0 ± 1.2), compared to those made with white maize (average rating for overall acceptability was 6.4 ± 0.8). Principal component analysis (PCA) of Amahewu sensory data showed that 71% of variation was due to maize types and 18% of variation may be due to the inoculum used during fermentation. The use of a starter culture improves the taste and aroma acceptability of amahewu. Segmentation of consumers based on overall linking for amahewu revealed three clusters, named A, B and C. Cluster A consisted of most consumers (43%), who liked amahewu moderately. About 60% of these consumers were females. Cluster B consisted of most of the consumers (31%) who were undecided about their liking for the product. Approximately 52% of the consumers in this cluster were female. Cluster C consisted of consumers (26%) who liked amahewu very much. Sixty-four percent (64%) of these consumers were female. It appeared that gender may have some influence on overall liking for amahewu, as cluster B, consisting of undecided consumers, had more male consumers compared to clusters A and C. Age did not seem to be significantly associated with the liking of amahewu. Provitamin A biofortified amahewu samples stored under refrigerated conditions (4ᴼC) had better microbiological quality compared to those stored at 25ᴼC and 37ᴼC. Refrigeration effectively maintains the microbiological quality of amahewu for about three of days. Provitamin A biofortified maize can be used to produce β-carotene enriched amahewu that is acceptable to consumers following the processing method that is traditionally employed for white amahewu at both domestic and commercial level. Provitamin A biofortified amahewu has the potential to make a significant contribution towards alleviating VAD among rural communities, who are the most vulnerable to VAD.


Foods ◽  
2021 ◽  
Vol 10 (10) ◽  
pp. 2408
Author(s):  
Xiaoqing Xiong ◽  
Chong Liu ◽  
Xueling Zheng

Liquid pre-fermentation technology was innovatively applied to the development of dried fermented noodles. The effects of fermentation time (1, 3 and 6 h) and yeast addition (0.2, 0.5 and 1.0 g/100 g of flour) on the quality, microstructure and flavor of dried noodles were also investigated in this study. Conspicuous porous structures and greater thickness of dried noodles were found when the fermentation time was ≤ 3 h and the yeast addition was ≥ 0.5 g/100 g of flour, which contributed to the increase in the breaking strength, cooking time and water absorption. However, when the fermentation time increased to 6 h, finer microporous structures, little change related to thickness and richer flavor levels were detected. Additionally, the total titratable acidity of dried fermented noodles was increased to 3.38–4.43 mL compared with the unfermented noodles (2.15 mL). Weaker gluten network structures caused by long-time fermentation and acidic environment led to lower hardness, chewiness, tensile force and tensile distance of cooked fermented noodles.


2021 ◽  
Vol 13 (3) ◽  
pp. 1109
Author(s):  
Edgar Ricardo Oviedo-Ocaña ◽  
Angélica María Hernández-Gómez ◽  
Marcos Ríos ◽  
Anauribeth Portela ◽  
Viviana Sánchez-Torres ◽  
...  

The composting of green waste (GW) proceeds slowly due to the presence of slowly degradable compounds in that substrate. The introduction of amendments and bulking materials can improve organic matter degradation and end-product quality. However, additional strategies such as two-stage composting, can deal with the slow degradation of green waste. This paper evaluates the effect of two-stage composting on the process and end-product quality of the co-composting of green waste and food waste amended with sawdust and phosphate rock. A pilot-scale study was developed using two treatments (in triplicate each), one being a two-stage composting and the other being a traditional composting. The two treatments used the same mixture (wet weight): 46% green waste, 19% unprocessed food waste, 18% processed food waste, 13% sawdust, and 4% phosphate rock. The traditional composting observed a higher degradation rate of organic matter during the mesophilic and thermophilic phases and observed thermophilic temperatures were maintained for longer periods during these two phases compared to two-stage composting (i.e., six days). Nonetheless, during the cooling and maturation phases, the two treatments had similar behaviors with regard to temperature, pH, and electrical conductivity, and the end-products resulting from both treatments did not statistically differ. Therefore, from this study, it is concluded that other additional complementary strategies must be evaluated to further improve GW composting.


Fermentation ◽  
2021 ◽  
Vol 7 (1) ◽  
pp. 31
Author(s):  
Pilar Blanco ◽  
María Vázquez-Alén ◽  
Teresa Garde-Cerdán ◽  
Mar Vilanova

Yeast plays an essential role in winemaking. Saccharomyces cerevisiae strains involved in fermentation determine the chemical and sensory characteristics of wines. S. cerevisiae XG3, isolated in Galicia (NW Spain), has desirable oenological potential, which has been proved at a pilot scale to produce quality wines. This study applies XG3 as active dry yeast at an industrial scale for Treixadura wine elaboration, and compares it with commercial yeast and spontaneous fermentation within three wineries included in Denomination of Origin Ribeiro over two vintages. Fermentations are monitored using conventional methods, and microbiological implantation controls are carried out by mtDNA-RFLPs analysis. Wine basic chemical parameters are determined using OIV official methodology, and volatile aroma compounds are determined by GC-MS. Finally, wine sensory analysis is also performed. S. cerevisiae XG3 shows an acceptable implantation ability—as compared to commercial control strains. The wines from XG3 have a higher total acidity and lower alcohol content. Their volatile composition differs from control wines, since XG3 produces significantly higher concentrations of acetates, volatile acids, esters and volatile phenols, depending on the vintage and winery. However, lower differences are perceived at the sensory level, where fruity and floral descriptors are perceived by the panellists in XG3 wines. Therefore, XG3 constitutes an alternative to differentiate Treixadura wines.


Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1795
Author(s):  
Norshahira Roslan ◽  
Shayfull Zamree Abd Rahim ◽  
Abdellah El-hadj Abdellah ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Katarzyna Błoch ◽  
...  

Achieving good quality of products from plastic injection moulding processes is very challenging, since the process comprises many affecting parameters. Common defects such as warpage are hard to avoid, and the defective parts will eventually go to waste, leading to unnecessary costs to the manufacturer. The use of recycled material from postindustrial waste has been studied by a few researchers. However, the application of an optimisation method by which to optimise processing parameters to mould parts using recycled materials remains lacking. In this study, Response Surface Methodology (RSM) and Particle Swarm Optimisation (PSO) methods were conducted on thick plate parts moulded using virgin and recycled low-density polyethylene (LDPE) materials (100:0, 70:30, 60:40 and 50:50; virgin to recycle material ratios) to find the optimal input parameters for each of the material ratios. Shrinkage in the x and y directions increased in correlation with the recycled ratio, compared to virgin material. Meanwhile, the tensile strength of the thick plate part continued to decrease when the recycled ratio increased. R30 (70:30) had the optimum shrinkage in the x direction with respect to R0 (100:0) material where the shrinkage increased by 24.49% (RSM) and 33.20% (PSO). On the other hand, the shrinkage in the y direction for R30 material increased by 4.48% (RSM) and decreased by 2.67% (PSO), while the tensile strength of R30 (70:30) material decreased by 0.51% (RSM) and 2.68% (PSO) as compared to R0 (100:0) material. Validation tests indicated that the optimal setting of processing parameter suggested by PSO and RSM for R0 (100:0), R30 (70:30), R40 (60:40) and R50 (50:50) was less than 10%.


2018 ◽  
Vol 36 (No. 3) ◽  
pp. 227-232 ◽  
Author(s):  
Jiao Li ◽  
Liangang Mao ◽  
Yanning Zhang ◽  
Lan Zhang ◽  
Hongyun Jiang

Changes in mango fruit quality, malondialdehyde content, and enzymatic activities in response to pathogen Alternaria alternata infection were studied. A. alternata significantly affected the appearance of mango fruit at 5 and 7 days after treatment (DAT). The quality of pathogen-infected fruit first showed a significant decrease in titratable acidity and vitamin C content and a significant increase in pH since 3 DAT. The malondialdehyde content was higher than that in the untreated controls at 3 and 7 DAT. The enzyme activities of ascorbate peroxidase and polyphenol oxidase showed significant increases since 3 DAT. Significant increases in l-phenylalanine ammonia-lyase and superoxide dismutase activities were observed at 7 DAT. These results indicate that A. alternata infection first significantly affects some biochemical constituents and enzyme activities in mango fruit since 3 DAT and that there was no significant effect on appearance until 5 DAT.


Sign in / Sign up

Export Citation Format

Share Document