scholarly journals Propylsulfonic Acid Functionalized SBA-15 Mesoporous Silica as Efficient Catalysts for the Acetalization of Glycerol

Catalysts ◽  
2018 ◽  
Vol 8 (8) ◽  
pp. 297 ◽  
Author(s):  
Ruiyun Li ◽  
Heyuan Song ◽  
Jing Chen
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Structural Parameters ◽  
Catalytic Performance ◽  
Cyclic Acetals ◽  
X Ray ◽  
Composition And Structure ◽  
Optimum Reaction ◽  
Adsorption Desorption ◽  
And Control

As the main by-product obtained from biomass, glycerol could be converted into valuable chemicals. Tunable propylsulfonic acid functionalized SBA-15 and KIT-6 with different structural parameters have been prepared by different methods while using 3-mercaptopropyltrimethoxysilane (MPTMS) as the source of sulfur. The composition and structure of the synthesized catalysts have been well-characterized by N2 adsorption-desorption (BET), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), X-ray fluorescence (XRF), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The catalytic performance of the prepared catalysts have been evaluated and compared in glycerol acetalization with formaldehyde to the mixture of 1,3-dioxane-5-ol and 1,3-dioxolane-4-methanol. Optimum reaction parameters were investigated to enhance the yield of products and control the distribution of glycerol formals. More than 90% yield of cyclic acetals were obtained with the ratio of two isomers 5R to 6R of 42:58.

Synthesis of TiO2 and ZrO2 nanomaterials for the degradation of nerve agent simulants

2021 ◽  
Vol 11 (1) ◽  
pp. 105-110
Author(s):  
Dung Le Van ◽  
Phuong Dang Tuyet ◽  
Trinh Nguyen Duy ◽  
Manh Nguyen Ba
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Chemical Warfare Agent ◽  
Catalytic Performance ◽  
Sem Images ◽  
X Ray ◽  
Nitrophenyl Phosphate ◽  
Tio2 Nanomaterials ◽  
Adsorption Desorption

TiO2 and ZrO2 nanomaterials were successfully synthesized by sol gel method. Samples were characterized by X-ray difraction (XRD), Fourier-transform infrared spectroscopy (FTIR), N2 adsorption–desorption, Scanning electron microscopy (SEM), Transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS),  SEM images and TEM images of TiO2 and ZrO2 samples showed the particle size of 10–20 nm. The results have revealed highly porous structure of ZrO2 and TiO2 nanomaterials with specific surface area of 116 m2g-1 and 125 m2g-1, respectively. The TiO2 and ZrO2 materials were used as the degradation of dimethyl 4-nitrophenyl phosphate (DMNP) chemical warfare agent emulator. The ZrO2 nanomaterial exhibited highly catalytic performance of DMNP degradation and the conversion reached to the value of 90.64 %, after 120 min of reaction.

ROOM TEMPERATURE PHOTOLUMINESCENCE OF POLYCRYSTALLINE SIC PREPARED FROM CARBON-SATURATED SI MELT

2002 ◽  
Vol 16 (06n07) ◽  
pp. 1047-1051
Author(s):  
JIANPING MA ◽  
ZHIMING CHEN ◽  
GANG LU ◽  
MINGBIN YU ◽  
LIANMAO HANG ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Uv Light ◽  
X Ray Diffraction ◽  
X Ray ◽  
Room Temperature Photoluminescence ◽  
Composition And Structure ◽  
Light Excitation ◽  
Scanning Electron

Intense photoluminescence (PL) has been observed at room temperature from the polycrystalline SiC samples prepared from carbon-saturated Si melt at a temperature ranging from 1500 to 1650°C. Composition and structure of the samples have been confirmed by means of X-ray photoelectron spectroscopy, X-ray diffraction and scanning electron microscopy. PL measurements with 325 nm UV light excitation revealed that the room temperature PL spectrum of the samples consists of 3 luminescent bands, the peak energies of which are 2.38 eV, 2.77 eV and 3.06 eV, respectively. The 2.38 eV band is much stronger than the others. It is suggested that some extrinsic PL mechanisms associated with defect or interface states would be responsible to the intensive PL observed at room temperature.

scholarly journals Synthesis of Hollow Flower-Like Fe3O4/MnO2/Mn3O4 Magnetically Separable Microspheres with Valence Heterostructure for Dye Degradation

Catalysts ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 589 ◽  
Author(s):  
Mingliang Ma ◽  
Yuying Yang ◽  
Yan Chen ◽  
Fei Wu ◽  
Wenting Li ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Organic Contaminants ◽  
Dye Degradation ◽  
Catalytic Performance ◽  
X Ray ◽  
Composite Microspheres ◽  
Magnetically Separable ◽  
Mno2 Nanosheet

In this manuscript, hollow flower-like ferric oxide/manganese dioxide/trimanganese tetraoxide (Fe3O4/MnO2/Mn3O4) magnetically separable microspheres were prepared by combining a simple hydrothermal method and reduction method. As the MnO2 nanoflower working as precursor was partially reduced, Mn3O4 nanoparticles were in situ grown from the MnO2 nanosheet. The composite microspheres were characterized in detail by employing scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET), vibration sample magnetometer (VSM) and UV–visible spectrophotometer (UV–vis). Under visible light conditions, the test for degrading rhodamine B (RhB) was used to verify the photocatalytic activity of the photocatalyst. The results showed that the efficiency of the Fe3O4/MnO2/Mn3O4 photocatalyst in visible light for 130 min is 94.5%. The catalytic activity of photocatalyst far exceeded that of the Fe3O4/MnO2 component, and after four cycles, the catalytic performance of the catalyst remained at 78.4%. The superior properties of the photocatalyst came from improved surface area, enhanced light absorption, and efficient charge separation of the MnO2/Mn3O4 heterostructure. This study constructed a green and efficient valence heterostructure composite that created a promising photocatalyst for degrading organic contaminants in aqueous environments.

scholarly journals Preparation of pod-shaped TiO 2 and Ag@TiO 2 nano burst tubes and their photocatalytic activity

2019 ◽  
Vol 6 (9) ◽  
pp. 191019 ◽  
Author(s):  
Shang Wang ◽  
Zhaolian Han ◽  
Tingting Di ◽  
Rui Li ◽  
Siyuan Liu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Oxalic Acid ◽  
Ultraviolet Light ◽  
Photoelectron Spectroscopy ◽  
Degradation Process ◽  
Catalytic Performance ◽  
Tetrabutyl Titanate ◽  
Order Kinetic ◽  
X Ray

The pod-shaped TiO 2 nano burst tubes (TiO 2 NBTs) were prepared by the combination of electrospinning and impregnation calcination with oxalic acid (H 2 C 2 O 4 ), polystyrene (PS) and tetrabutyl titanate. The silver nanoparticles (AgNPs) were loaded onto the surface of TiO 2 NBTs by ultraviolet light reduction method to prepare pod-shaped Ag@TiO 2 NBTs. In this work, we analysed the effect of the amount of oxalic acid on the cracking degree of TiO 2 NBTs; the effect of the concentration of AgNO 3 solution on the particle size and loading of AgNPs on the surface of TiO 2 NBTs. Scanning electron microscopy and transmission electron microscopy investigated the surface morphology of samples. X-ray diffraction and X-ray photoelectron spectroscopy characterized the structure and composition of samples. Rhodamine B (RhB) solution was used to evaluate the photocatalytic activity of pod-shaped TiO 2 NBTs and Ag@TiO 2 NBTs. The results showed that TiO 2 NBTs degraded 91.0% of RhB under ultraviolet light, Ag@TiO 2 NBTs degraded 95.5% under visible light for 75 and 60 min, respectively. The degradation process of both samples was consistent with the Langmuir–Hinshelwood first-order kinetic equation. Therefore, the catalytic performance of the sample is: Ag@TiO 2 NBTs > TiO 2 NBTs > TiO 2 nanotubes.

scholarly journals FeNiCeOx ternary catalyst prepared by ultrasonic impregnation method for diclofenac removal in Fenton-like system

2019 ◽  
Vol 79 (9) ◽  
pp. 1675-1684 ◽  
Author(s):  
Guang Xian ◽  
Nan Zhang ◽  
Guangming Zhang ◽  
Yi Zhang ◽  
Zhiguo Zou
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Hot Spot ◽  
Catalytic Performance ◽  
Synthesis Process ◽  
Impregnation Method ◽  
Lattice Contraction ◽  
X Ray ◽  
Ultrasonic Synthesis ◽  
Cavitation Effect

Abstract FeNiCeOx was firstly prepared by ultrasonic impregnation method and used to remove diclofenac in a Fenton-like system. The catalytic activity was improved successfully by doping Ni into FeCeOx. The diclofenac removal efficiency reached 97.9% after 30 min reaction. The surface morphology and properties of FeNiCeOx were characterized by Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), Raman and X-ray photoelectron spectroscopy (XPS) analyses. FeNiCeOx in this paper had larger specific surface area than those prepared by other methods, which was attributed to the cavitation effect and hot-spot effect during the ultrasonic synthesis process. Low crystallinity of Fe2O3 and NiO showed by characterization could lead to high interaction of Fe and Ni ions with support of CeO2. They substituted Ce in CeO2, caused lattice contraction and formed more oxygen vacancies, which favoured the catalytic reaction. Meanwhile, Fe and Ce ions both had redox cycles of Fe3+/Fe2+ and Ce4+/Ce3+, which facilitated the electron transfer in the reaction. The synergistic effect among Fe, Ni and Ce might lead to better catalytic performance of FeNiCeOx than any binary metal oxides constituted from the above three elements. Finally, the potential mechanism of diclofenac removal in FeNiCeOx-H2O2 system is proposed.

Beta-Cyclodextrin-triggered fabrication of broccoli-like ZnO nanoaggregates with enhanced photocatalytic capability

2020 ◽  
Vol 13 (02) ◽  
pp. 2051004
Author(s):  
Jinyan Xiong ◽  
Wei Li ◽  
Kai Zhao ◽  
Weijie Li ◽  
Gang Cheng
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Separation Efficiency ◽  
Nitrogen Adsorption ◽  
Electrochemical Measurement ◽  
X Ray ◽  
Recombination Efficiency ◽  
Beta Cyclodextrin ◽  
Composition And Structure ◽  
Pollution Removal

Nanocrystallite aggregates have great potential in semiconductor-based photocatalysis toward environmental pollution removal. In this work, we reported the fabrication of broccoli-like zinc oxide nanoaggregates in the presence of beta-cyclodextrin in ethylene glycol-H2O medium. The composition and structure of the as-obtained ZnO nanoaggregates were characterized by powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and nitrogen adsorption. It was observed that the beta-cyclodextrin played an important role in the fabrication of such broccoli-like structure. A plausible formation mechanism was discussed on the basis of the controllable experiments. The photocatalytic performance of the products was studied through the photodegradation of rhodamine B under simulated sunlight irradiation. Compared to the spherical ZnO nanoaggregates and ZnO broken spheres, the broccoli-like ZnO exhibited superior photocatalytic efficiency. Based on the photocurrent and electrochemical measurement results, the higher separation efficiency of the photogenerated carriers and lower recombination efficiency of the photoinduced electron–hole pairs over the broccoli-like ZnO nanoaggregates contributed to their remarkable photocatalytic activity.

scholarly journals The Preparation and Catalytic Properties of Nanoporous Pt/CeO2 Composites with Nanorod Framework Structures

Nanomaterials ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 683 ◽  
Author(s):  
Haiyang Wang ◽  
Dong Duan ◽  
Chen Ma ◽  
Wenyu Shi ◽  
Miaomiao Liang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Catalytic Properties ◽  
Structural Parameters ◽  
Active Oxygen Species ◽  
Pt Nanoparticles ◽  
Strong Interactions ◽  
X Ray ◽  
Small Pore ◽  
Melt Spun

Pt/CeO2 catalysts with nanoporous structures were prepared by the facile dealloying of melt-spun Al92−XCe8PtX (X = 0.1; 0.3 and 0.5) ribbons followed by calcination. The phase compositions and structural parameters of the catalysts were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HRTEM). The specific surface area and pore size distribution were characterized by N2 adsorption–desorption tests. The catalytic properties were evaluated by a three-way catalyst (TWC) measurement system. The results revealed that the dealloyed samples exhibited a nanorod framework structure. The Pt nanoparticles that formed in situ were supported and highly dispersed on the CeO2 nanorod surface and had sizes in the range of 2–5 nm. For the catalyst prepared from the melt-spun Al91.7Ce8Pt0.3 ribbons, the 50% CO conversion temperature (T50) was 91 °C, and total CO could be converted when the temperature was increased to 113 °C. An X-ray photoelectron spectroscopy (XPS) test showed that the Pt0.3/CeO2 sample had a slightly richer oxygen vacancy; and a H2 temperature-programmed reduction (H2-TPR) test demonstrated its superior adsorption ability for reduction gas and high content of active oxygen species. The experiments indicated that the catalytic performance could be retained without any attenuation after 130 h when water and CO2 were present in the reaction gas. The favorable catalytic activities were attributed to the high specific areas and small pore and Pt particle sizes as well as the strong interactions between the CeO2 and Pt nanoparticles. The Pt nanoparticles were embedded in the surface of the CeO2 nanorods, inhibiting growth. Therefore, the catalytic stability and water resistance were excellent.

scholarly journals Facile Preparation of g-C3N4-WO3 Composite Gas Sensing Materials with Enhanced Gas Sensing Selectivity to Acetone

2019 ◽  
Vol 2019 ◽  
pp. 1-8 ◽  
Author(s):  
Xiangfeng Chu ◽  
Junsong Liu ◽  
Shiming Liang ◽  
Linshan Bai ◽  
Yongping Dong ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Gas Sensing ◽  
Hydrothermal Processing ◽  
Optimum Temperature ◽  
X Ray ◽  
Gas Sensing Properties ◽  
Facile Preparation ◽  
Adsorption Desorption ◽  
Scanning Electron

In this paper, g-C3N4-WO3 composite materials were prepared by hydrothermal processing. The composites were characterized by means of X-ray powder diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and N2 adsorption-desorption, respectively. The gas sensing properties of the composites were investigated. The results indicated that the addition of appropriate amount of g-C3N4 to WO3 could improve the response and selectivity to acetone. The sensor based on 2 wt% g-C3N4-WO3 composite showed the best gas sensing performances. When operating at optimum temperature of 310°C, the responses to 1000 ppm and 0.5 ppm acetone were 58.2 and 1.6, respectively, and the ratio of the S1000 ppm acetone to S1000 ppm ethanol reached 3.7.

scholarly journals MoSe2-GO/rGO Composite Catalyst for Hydrogen Evolution Reaction

Polymers ◽  
2018 ◽  
Vol 10 (12) ◽  
pp. 1309 ◽  
Author(s):  
Wenwu Guo ◽  
Quyet Le ◽  
Amirhossein Hasani ◽  
Tae Lee ◽  
Ho Jang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Hydrogen Evolution ◽  
Hydrogen Evolution Reaction ◽  
Photoelectron Spectroscopy ◽  
Transition Metal Dichalcogenides ◽  
Catalytic Performance ◽  
Composite Catalyst ◽  
X Ray ◽  
Molybdenum Selenide

There has been considerable research to engineer composites of transition metal dichalcogenides with other materials to improve their catalytic performance. In this work, we present a modified solution-processed method for the formation of molybdenum selenide (MoSe2) nanosheets and a facile method of structuring composites with graphene oxide (GO) or reduced graphene oxide (rGO) at different ratios to prevent aggregation of the MoSe2 nanosheets and hence improve their electrocatalytic hydrogen evolution reaction performance. The prepared GO, rGO, and MoSe2 nanosheets were characterized by X-ray powder diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and scanning electron microscopy. The electrocatalytic performance results showed that the pure MoSe2 nanosheets exhibited a somewhat high Tafel slope of 80 mV/dec, whereas the MoSe2-GO and MoSe2-rGO composites showed lower Tafel slopes of 57 and 67 mV/dec at ratios of 6:4 and 4:6, respectively. We attribute the improved catalytic effects to the better contact and faster carrier transfer between the edge of MoSe2 and the electrode due to the addition of GO or rGO.

Facile Synthesis and Characterization of Spinel NiFe2O4 Nanoparticles and Studies of Their Photocatalytic Activity for Oxidation of Alcohols

2020 ◽  
Vol 12 (3) ◽  
pp. 357-365 ◽  
Author(s):  
Xiangrong Ma ◽  
Rui Dang ◽  
Jieying Liu ◽  
Fang Yang ◽  
Huigui Li ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray ◽  
Bet Analysis ◽  
Oxidation Of Alcohols ◽  
20 Nm ◽  
Adsorption Desorption

In this paper, we report a novel and facile approach for the synthesis of spinel NiFe2O4 nanoparticles and studies of its photocatalytic activity for oxidation of alcohols. The as-synthesized catalyst was thoroughly characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), elemental mapping, transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), and N2 adsorption–desorption isotherm (BET) analysis. The TEM image reveals cubic shapes with an average particle size of 10–20 nm. The as-synthesized spinel NiFe2O4 has proved to be an excellent photocatalyst for oxidation of alcohol to the aldehyde with a conversion of 80% and selectivity of 99%. The catalyst has also proved to be noteworthy as it does not loss its catalytic activity even after five cycles of reuse.

Sign in / Sign up

Export Citation Format

Share Document