scholarly journals Influence of Different Acid on the Interfacial Compatibility between Rusted Steel and Water-Based Coating

Coatings ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1412
Author(s):  
Wenbo Li ◽  
Yue Jiang ◽  
Dingguo Liu ◽  
Jiran Zhu ◽  
Yi Xie ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Atmospheric Corrosion ◽  
Zinc Phosphate ◽  
Adhesion Force ◽  
Salt Spray ◽  
Corrosion Current ◽  
Conversion Coating ◽  
Good Effect ◽  
Rust Layer ◽  
Main Component

We aimed to improve the corrosion resistance of transmission network cabinet equipment in high temperature and humidity environment. In this paper, using acid modified acrylic acid as the main component, the composite conversion agent was obtained by adding phosphoric acid phytic acid and other components. Through the surface morphology, electrochemical test and adhesion force test of rust conversion coating, the versatility and corrosion resistance of rust conversion coating on the substrates were analyzed. Combined with zinc phosphate primer, the effect of rust conversion agent on the adhesion and salt spray corrosion resistance of the commercial primers was studied. The composite conversion agent has good effect on atmospheric corrosion rust layer. The corrosion resistance and adhesion force of the atmospheric corrosion rust layer treated with rust conversion agent were significantly increased. The adhesion of zinc phosphate primer on atmospheric corrosion rust coating with rust conversion was three times higher than that of atmospheric corrosion rust coating without rust conversion, respectively. Composite rust conversion agent has broad versatility, which can be used for rust conversion of atmospheric corrosion rust layer. At the same time, it has a good corrosion resistance, that can obviously improve the corrosion potential of the corroded surface and reduce the corrosion current density. In addition, the composite rust conversion agent can significantly improve the adhesion and corrosion resistance of the primer coating.

Preparation and Properties of Chrome-Free Colored Na3AlF6 Conversion Coating on Aluminum Alloy

2012 ◽  
Vol 490-495 ◽  
pp. 3527-3530 ◽  
Author(s):  
Ai Hua Yi ◽  
Wen Fang Li ◽  
Jun Du ◽  
Song Lin Mu
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Current Density ◽  
Potentiodynamic Polarization ◽  
Corrosion Current Density ◽  
Corrosion Current ◽  
Conversion Coating ◽  
Film Forming ◽  
Polarization Test ◽  
Main Component

By adding tannic acid and film-forming accelerator in the treatment solution containing titanium and zirconium ions, a golden conversion coating on the surface of aluminum alloy was prepared. The main component and corrosion resistance of the conversion coating were characterized by means of EDS, SEM, XRD and electrochemical workstation. The conversion coating was golden and showed as uniform cubical crystal. results also showed that the main component of the conversion coating was Na3AlF6. In potentiodynamic polarization test, the corrosion current density of the aluminum alloy decreases to 0.083 A•cm-2 from 5.894 A•cm-2, which indicated an obvious improvement of corrosion resistance.

scholarly journals Design and Multidimensional Screening of Flash-PEO Coatings for Mg in Comparison to Commercial Chromium(VI) Conversion Coating

Metals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 337
Author(s):  
Ewa Wierzbicka ◽  
Marta Mohedano ◽  
Endzhe Matykina ◽  
Raul Arrabal
Keyword(s):  
Corrosion Resistance ◽  
Corrosion Protection ◽  
Electrochemical Impedance ◽  
Salt Spray ◽  
Conversion Coating ◽  
Neutral Salt ◽  
Chromium Vi ◽  
Alkaline Electrolytes ◽  
Az31b Alloy ◽  
Plasma Electrolytic

REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) regulations demand for an expedient discovery of a Cr(VI)-free alternative corrosion protection for light alloys even though the green alternatives might never be as cheap as current harmful technologies. In the present work, flash- plasma electrolytic oxidation coatings (FPEO) with the process duration < 90 s are developed on AZ31B alloy in varied mixtures of silicate-, phosphate-, aluminate-, and fluoride-based alkaline electrolytes implementing current density and voltage limits. The overall evaluation of the coatings’ anticorrosion performance (electrochemical impedance spectroscopy (EIS), neutral salt spray test (NSST), paintability) shows that from nine optimized FPEO recipes, two (based on phosphate, fluoride, and aluminate or silicate mixtures) are found to be an adequate substitute for commercially used Cr(VI)-based conversion coating (CCC). The FPEO coatings with the best corrosion resistance consume a very low amount of energy (~1 kW h m−2 µm−1). It is also found that the lower the energy consumption of the FPEO process, the better the corrosion resistance of the resultant coating. The superb corrosion protection and a solid environmentally friendly outlook of PEO-based corrosion protection technology may facilitate the economic justification for industrial end-users of the current-consuming process as a replacement of the electroless CCC process.

scholarly journals Effect of Oxide Scale Microstructure on Atmospheric Corrosion Behavior of Hot Rolled Steel Strip

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 517
Author(s):  
Bin Sun ◽  
Lei Cheng ◽  
Chong-Yang Du ◽  
Jing-Ke Zhang ◽  
Yong-Quan He ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Oxide Scale ◽  
Corrosion Product ◽  
Corrosion Behavior ◽  
Corrosion Test ◽  
Atmospheric Corrosion ◽  
Corrosion Mechanism ◽  
Type I ◽  
Rust Layer ◽  
Hot Rolled

The atmospheric corrosion behavior of a hot-rolled strip with four types (I–IV) of oxide scale was investigated using the accelerated wet–dry cycle corrosion test. Corrosion resistance and porosity of oxide scale were studied by potentiometric polarization measurements. Characterization of samples after 80 cycles of the wet–dry corrosion test showed that scale comprised wüstite and magnetite had strongest corrosion resistance. Oxide scale composed of inner magnetite/iron (>70%) and an outer magnetite layer had the weakest corrosion resistance. The corrosion kinetics (weight gain) of each type of oxide scale followed an initial linear and then parabolic (at middle to late corrosion) relationship. This could be predicted by a simple kinetic model which showed good agreement with the experimental results. Analysis of the potentiometric polarization curves, obtained from oxide coated steel electrodes, revealed that the type I oxide scale had the highest porosity, and the corrosion mechanism resulted from the joint effects of electrochemical behavior and the porosity of the oxide scale. In the initial stage of corrosion, the corrosion product nucleated and an outer rust layer formed. As the thickness of outer rust layer increased, the corrosion product developed on the scale defects. An inner rust layer then formed in the localized pits as crack growth of the scale. This attacked the scale and expanded into the substrate during the later stage of corrosion. At this stage, the protective effect of the oxide scale was lost.

scholarly journals The Potential of Calcium/Phosphate Containing MAO Implanted in Bone Tissue Regeneration and Biological Characteristics

2021 ◽  
Vol 22 (9) ◽  
pp. 4706
Author(s):  
Shun-Yi Jian ◽  
Salim Levent Aktug ◽  
Hsuan-Ti Huang ◽  
Cheng-Jung Ho ◽  
Sung-Yen Lin ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Calcium Phosphate ◽  
Soft Tissues ◽  
Salt Spray ◽  
Surface Characteristics ◽  
Corrosion Current ◽  
Biological Properties ◽  
Bone Tissue Regeneration ◽  
Additional Surgery

Micro arc oxidation (MAO) is a prominent surface treatment to form bioceramic coating layers with beneficial physical, chemical, and biological properties on the metal substrates for biomaterial applications. In this study, MAO treatment has been performed to modify the surface characteristics of AZ31 Mg alloy to enhance the biocompatibility and corrosion resistance for implant applications by using an electrolytic mixture of Ca3(PO4)2 and C10H16N2O8 (EDTA) in the solutions. For this purpose, the calcium phosphate (Ca-P) containing thin film was successfully fabricated on the surface of the implant material. After in-vivo implantation into the rabbit bone for four weeks, the apparent growth of soft tissues and bone healing effects have been documented. The morphology, microstructure, chemical composition, and phase structures of the coating were identified by SEM, XPS, and XRD. The corrosion resistance of the coating was analyzed by polarization and salt spray test. The coatings consist of Ca-P compounds continuously have proliferation activity and show better corrosion resistance and lower roughness in comparison to mere MAO coated AZ31. The corrosion current density decreased to approximately 2.81 × 10−7 A/cm2 and roughness was reduced to 0.622 μm. Thus, based on the results, it was anticipated that the development of degradable materials and implants would be feasible using this method. This study aims to fabricate MAO coatings for orthopedic magnesium implants that can enhance bioactivity, biocompatibility, and prevent additional surgery and implant-related infections to be used in clinical applications.

Research on Corrosion Resistance of AZ91D Magnesium Alloy Coated with Epoxy Resin

2011 ◽  
Vol 686 ◽  
pp. 292-299
Author(s):  
Yong Gang Li ◽  
Ying Hui Wei ◽  
Li Feng Hou ◽  
Yun Tian ◽  
Li Jing Yang
Keyword(s):  
Corrosion Resistance ◽  
Magnesium Alloy ◽  
Adhesion Force ◽  
Die Casting ◽  
Corrosion Current ◽  
Scratch Test ◽  
Organic Coating ◽  
Thin Wall ◽  
Scanning Method ◽  
Az91d Magnesium Alloy

The corrosion resistance of a 1~2mm thick AZ91D magnesium alloy die-casting coated with epoxy varnish after phosphatizing was tested. Zinc phosphating solution was used. In the experiment, uniform paint was obtained by dipping method. Scratch test showed that the adhesion force between the coating and matrix is excellent. Within the test range the optimal phosphating temperature and time are 50°C and 1 min tested by dynamic potential scanning method. With the organic coating the corrosion current density decreased 3 orders of magnitude, the polarization resistance increased 3 orders of magnitude. The coated specimens were immersed in10% H2SO4, 10% NaOH and acetone for 10 days, respectively. The results showed that blistering did not occur on the paint films. This work illustrated that the simple zinc phosphating process combined with simple organic coating can meet the corrosion resistance requirements of thin-wall die casting magnesium components that require higher quality appearance.

scholarly journals Preparation of Ti–Zr-Based Conversion Coating on 5052 Aluminum Alloy, and Its Corrosion Resistance and Antifouling Performance

Coatings ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 397 ◽  
Author(s):  
Hehong Zhang ◽  
Xiaofeng Zhang ◽  
Xuhui Zhao ◽  
Yuming Tang ◽  
Yu Zuo
Keyword(s):  
Corrosion Resistance ◽  
Surface Modification ◽  
Aluminum Alloy ◽  
Current Density ◽  
Corrosion Current Density ◽  
Salt Water ◽  
Water Immersion ◽  
Chemical Conversion ◽  
Corrosion Current ◽  
Conversion Coating

A chemical conversion coating on 5052 aluminum alloy was prepared by using K2ZrF6 and K2TiF6 as the main salts, KMnO4 as the oxidant and NaF as the accelerant. The surface morphology, structure and composition were analyzed by SEM, EDS, FT–IR and XPS. The corrosion resistance of the conversion coating was studied by salt water immersion and polarization curve analysis. The influence of fluorosilane (FAS-17) surface modification on its antifouling property was also discussed. The results showed that the prepared conversion coating mainly consisted of AlF3·3H2O, Al2O3, MnO2 and TiO2, and exhibited good corrosion resistance. Its corrosion potential in 3.5 wt % NaCl solution was positively shifted about 590 mV and the corrosion current density was dropped from 1.10 to 0.48 μA cm−2. By sealing treatment in NiF2 solution, its corrosion resistance was further improved yielding a corrosion current density drop of 0.04 μA cm−2. By fluorosilane (FAS-17) surface modification, the conversion coating became hydrophobic due to low-surface-energy groups such as CF2 and CF3, and the contact angle reached 136.8°. Moreover, by FAS-17 modification, the corrosion resistance was enhanced significantly and its corrosion rate decreased by about 25 times.

Effect of Sol-Gel Film on the Corrosion Resistance of Low Carbon Steel Plate

2020 ◽  
Vol 984 ◽  
pp. 43-50
Author(s):  
Hua Yuan Zhang ◽  
Can Wang ◽  
Bing Xue ◽  
Jing Luo
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
Steel Plate ◽  
Salt Spray ◽  
Sol Gel ◽  
Low Carbon Steel ◽  
Corrosion Current ◽  
Neutral Salt ◽  
Low Carbon ◽  
Gel Film

To improve the corrosion resistance on Q235 low carbon steel, in this paper, tetraethyl orthosilicate (TEOS), N-dodecyl trimethoxysilane and γ-(2,3-epoxypropoxy) propytrimethoxysilane (KH560) were used to make organic-inorganic hybrid sol-gel film. Cross cut test adhesion method, neutral salt spray test, electrochemical test and film protective efficiency were taken to value the corrosion resistance property. The corrosion topography was studied by optical microscope. In addition, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) curves and equivalent electric circuit fitting were used to analyze the corrosion mechanism. The cross cut adhesion of sol-gel film can reach 1 class and the protection class can attain 5 class after 72 hours neutral salt spray test. According to the potentiodynamic polarization curve analysis, the corrosion potential of sol-gel film coating sample after 0.5 hours immersion was -0.46 V (vs. SCE) on the 0.1 Hz, and its corrosion current density was 4.74×10-7 A·cm-2. The corrosion potential of bare Q235 low carbon steel plate after 0.5 hours immersion was -0.78 V (vs. SCE) on the 0.1 Hz, and its corrosion current density was 4.75×10-6 A·cm-2. The impedance value on 0.1 Hz (|Z|0.1Hz) (1.27×106 Ω·cm2) of sol-gel film coating sample was more than three orders of magnitude higher than the value of the low carbon steel plate. Even dipping in 3.5 wt. % NaCl for 72 hours, the |Z|0.1Hz value of sol-gel coating sample was still one order of magnitude higher than the low carbon steel plate with 0.5 hours immersion. Sol-gel film with excellent adhesion can significantly improve the corrosion resistance of low carbon steel plate. Sol-gel film can increase the protection efficiency of low carbon steel plate by 90%.

Effects of potassium silicate on corrosion behavior of dacromet coating

2019 ◽  
Vol 66 (6) ◽  
pp. 819-826
Author(s):  
Khashayar Tabi ◽  
Mansour Farzam ◽  
Davood Zaarei
Keyword(s):  
Corrosion Resistance ◽  
Corrosion Behavior ◽  
Automobile Industry ◽  
Electrochemical Impedance ◽  
Salt Spray ◽  
Corrosion Current ◽  
Potassium Silicate ◽  
Coated Steel ◽  
Content Type ◽  
New Information

Purpose Potassium silicate sealer was applied on solvent-cleaned, acid-pickled, dacromet-coated steel to improve its corrosion resistance. The purpose of this paper is to study the corrosion behavior of dacromet-coated steel. Design/methodology/approach Potassium silicate sealer was applied on solvent-cleaned, acid-pickled, dacromet-coated steel to improve its corrosion resistance. Electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and salt spray were carried out. SEM was used to study the morphological appearance of the surface. Findings The EIS behavior indicated that solvent-cleaned dacromet-coated steel sealed with potassium silicate showed that the corrosion current density was 2.664E − 5 A.cm2 which was reduced to 8.752E − 6 A.cm2 and the corrosion rate, which was 2.264E − 2 mm.year−1, was reduced to 7.438E − 3 mm.year−1 in NaCl 3.5 wt.per cent. EIS was used in NaCl 3.5 wt.%, and the Bode plot characteristics showed that the corrosion protection of solvent-cleaned, dacromet-coated steel was enhanced when sealed with potassium silicate. The EDS results of salt-sprayed, solvent-cleaned samples after 10 days indicated that the main corrosion products are composed of SiO2, ZnO and Al2O3. Research limitations/implications The detection of Li element in EDS was not possible because of the device limitation. Originality/value The current paper provides new information about the sealing properties of potassium silicate and its effects on the corrosion resistance of dacromet coating, which is widely used in many industries such as the automobile industry.

Formation and Properties of Zr/Ti Based Nano-Sized Non-Chromium Chemical Conversion Coating on AA 5083

2019 ◽  
Vol 19 (6) ◽  
pp. 3487-3494 ◽  
Author(s):  
Bin Liu ◽  
Yi Zhao ◽  
Liang Li ◽  
Yafei Feng ◽  
Zhigang Fang ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Acidic Solution ◽  
Salt Spray ◽  
Chemical Conversion ◽  
Conversion Coating ◽  
Dense Layer ◽  
Environment Friendly ◽  
Chemical Conversion Coating ◽  
Inhibitive Action ◽  
Nano Size

An environment-friendly non-chromium chemical conversion coating was obtained from fluozirconate/fluotitanate acidic solution for the corrosion protection of AA 5083. The surface morphology, composition, electrochemical behavior and corrosion resistance of this coating were investigated. The coating was found to be a homogeneous and dense layer consisting of nano-size particles, of which the major component was compound oxides consisted by Al, Mg, Zr, Ti, F and O. The results of electrochemical measurements, immersion and natural salt spray (NSS) tests demonstrated that the corrosion resistance of the AA 5083 H-116 was improved by the nano-sized non-chromium chemical conversion coating considerably, which was most attributed to the great inhibitive action on the anodic dissolution by acting as a protective barrier layer.

Protective behavior of volatile corrosion inhibitor on atmospheric corrosion process of carbon steel under thin electrolyte liquid film of chloride solutions

2020 ◽  
Vol 10 (9) ◽  
pp. 1435-1443
Author(s):  
Dong Wang ◽  
Chenxi Wang ◽  
Changqing Fang ◽  
Xing Zhou ◽  
Mengyuan Pu ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
Liquid Film ◽  
Corrosion Inhibitor ◽  
Current Density ◽  
Atmospheric Corrosion ◽  
Corrosion Current Density ◽  
Corrosion Current ◽  
Corrosion Process ◽  
Closed Container

The corrosion process of carbon steel and corrosion resistance behavior of volatile corrosion inhibitor (VCI) under thin electrolyte liquid film containing chloride was investigated by electrochemical measurements and surface characterization. Results indicated that composite VCI was composed of sodium molybdate and sodium benzoate, and exhibited higher corrosion resistance in 3.5% NaCl solution compared with absence of VCI. The corrosion current density obviously decreased with presence of VCI, and the synergies between binary components increased the corrosion inhibiting rate on carbon steel to up to 90%. The corrosion current density of carbon steel increased with increased temperature after volatilization of VCI. A closed container was carried out to mimic atmospheric corrosion condition, and its vapor corrosion inhibition property was evaluated in this closed container. Results showed that the VCI acted as an inhibitor by suppressing anodic dissolution and metallic ion transfer through the formation of protective film. It was also observed that the variation of carbon steel surface with volatilization of VCI was assessed by atomic force microscope (AFM) and scanning electron microscope (SEM). The anodic process for carbon steel without VCI affected the corrosion rate due to accumulation of corrosion products, while the morphology of carbon steel was hardly changed with volatilization of VCI. The results showed that the VCI volatilized to the surface and form to protect film. VCI was automatically volatilized into gas, which protected steel from corrosion. This composite VCI can then be applied as a significant corrosion inhibition method.

Sign in / Sign up

Export Citation Format

Share Document