scholarly journals Novel Low-Complexity and Low-Power Flip-Flop Design

Electronics ◽  
2020 ◽  
Vol 9 (5) ◽  
pp. 783
Author(s):  
Jin-Fa Lin ◽  
Zheng-Jie Hong ◽  
Chang-Ming Tsai ◽  
Bo-Cheng Wu ◽  
Shao-Wei Yu
Keyword(s):  
Low Power ◽  
Average Power ◽  
Circuit Complexity ◽  
Complementary Metal Oxide Semiconductor ◽  
Cmos Technology ◽  
Digital Circuit ◽  
Oxide Semiconductor ◽  
System Level ◽  
Flip Flop ◽  
Chip Area

In this paper, a compact and low-power true single-phase flip-flop (FF) design with fully static operations is presented. The design is developed by using various circuit-reduction schemes and features a hybrid logic style employing both pass transistor logic (PTL) and static complementary metal-oxide semiconductor (CMOS) logic to reduce circuit complexity. These circuit optimization measures pay off in various aspects, including smaller clock-to-Q (CQ) delay, lower average power, lower leakage power, and smaller layout area; and the transistor-count is only 17. Fabricated in TSMC 180 nm CMOS technology, it reduces by over 29% the chip area compared to the conventional transmission gate FF (TGFF). To further show digital circuit/system level advantages, a multi-mode shift register has been realized. Experimental measurement results at 1.8 V/4 MHz show that, compared with the TGFF design, the proposed design saves 64.7% of power consumption while reducing chip area by 26.2%.

scholarly journals A Low Power, High Speed 18-Transitor True Single-Phase Clocking D Flip- Flop Design In 90nm Cmos Technology

2019 ◽  
Vol 8 (11) ◽  
pp. 3258-3262
Keyword(s):  
Low Power ◽  
High Speed ◽  
Single Phase ◽  
Average Power ◽  
Circuit Complexity ◽  
Cmos Technology ◽  
Flip Flop ◽  
Average Power Consumption ◽  
Pass Transistor ◽  
Pass Transistor Logic

In this paper the authors came up with a contemporary low power, high-speed 18- transistor true singlephase clocking D flip-flop (FF) design using complementary pass-transistor logic. This design is a master-slave-type logic structure and hybrid logic design consisting of complementary pass-transistor logic style and static CMOS logic style. In order to reduce the number of transistors and to simplify the circuit complexity complementary pass-transistor logic style is used. In this design state transition is faster in the slave latch which enhances time performance using a virtual VDD technique. The circuit is designed using GPDK 90nm CMOS technology and the simulation results show better performance indices such as average power consumption, clock- to-Q delay, data-to-Q delay, PDP and area of utilization.

scholarly journals Low Power Robust Early Output Asynchronous Block Carry Lookahead Adder with Redundant Carry Logic

Electronics ◽  
2018 ◽  
Vol 7 (10) ◽  
pp. 243 ◽  
Author(s):  
Padmanabhan Balasubramanian ◽  
Douglas Maskell ◽  
Nikos Mastorakis
Keyword(s):  
Low Power ◽  
Digital Signal Processor ◽  
Digital Signal ◽  
Complementary Metal Oxide Semiconductor ◽  
Low Power Design ◽  
Cmos Technology ◽  
General Purpose ◽  
Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Power Cycle

Adder is an important datapath unit of a general-purpose microprocessor or a digital signal processor. In the nanoelectronics era, the design of an adder that is modular and which can withstand variations in process, voltage and temperature are of interest. In this context, this article presents a new robust early output asynchronous block carry lookahead adder (BCLA) with redundant carry logic (BCLARC) that has a reduced power-cycle time product (PCTP) and is a low power design. The proposed asynchronous BCLARC is implemented using the delay-insensitive dual-rail code and adheres to the 4-phase return-to-zero (RTZ) and the 4-phase return-to-one (RTO) handshaking. Many existing asynchronous ripple-carry adders (RCAs), carry lookahead adders (CLAs) and carry select adders (CSLAs) were implemented alongside to perform a comparison based on a 32/28 nm complementary metal-oxide-semiconductor (CMOS) technology. The 32-bit addition was considered for an example. For implementation using the delay-insensitive dual-rail code and subject to the 4-phase RTZ handshaking (4-phase RTO handshaking), the proposed BCLARC which is robust and of early output type achieves: (i) 8% (5.7%) reduction in PCTP compared to the optimum RCA, (ii) 14.9% (15.5%) reduction in PCTP compared to the optimum BCLARC, and (iii) 26% (25.5%) reduction in PCTP compared to the optimum CSLA.

Simulations and Modeling of TFET for Low Power Design

2016 ◽  
pp. 640-667 ◽  
Author(s):  
Sunil Kumar ◽  
Balwinder Raj
Keyword(s):  
Low Power ◽  
Semiconductor Industry ◽  
Complementary Metal Oxide Semiconductor ◽  
Low Power Design ◽  
Cmos Technology ◽  
Oxide Semiconductor ◽  
Manufacturing Cost ◽  
Technology Advancement ◽  
Channel Effects ◽  
Tunnel Fets

In Complementary Metal-Oxide-Semiconductor (CMOS) technology, scaling has been a main key for continuous progress in silicon-based semiconductor industry over the past four decades. However, as the technology advancement on nanometer scale regime for the purpose of building ultra-high density integrated electronic computers and extending performance, CMOS devices are facing fundamental problems such as increased leakage currents, large process parameter variations, short channel effects, increase in manufacturing cost, etc. The new technology must be energy efficient, dense, and enable more device function per unit area and time. There are many novel nanoscale semiconductor devices, this book chapter introduces and summarizes progress in the development of the Tunnel Field-Effect Transistors (TFETs) for low power design. Tunnel FETs are interesting devices for ultra-low power applications due to their steep sub-threshold swing (SS) and very low OFF-current. Tunnel FETs avoid the limit 60mv/decade by using quantum-mechanical Band-to-Band Tunneling (BTBT).

Design of Low Power Integrated CMOS Potentiometric Biosensor for Direct Electronic Detection of DNA Hybridization

2014 ◽  
Vol 67 (1) ◽  
Author(s):  
Wong How Hwan ◽  
Vinny Lam Siu Fan ◽  
Yusmeeraz Yusof
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Dna Hybridization ◽  
Point Of Care ◽  
Complementary Metal Oxide Semiconductor ◽  
Cmos Technology ◽  
Channel Length ◽  
Electrical Signal ◽  
Oxide Semiconductor ◽  
Detection Circuit

The purpose of this research is to design a low power integrated complementary metal oxide semiconductor (CMOS) detection circuit for charge-modulated field-effect transistor (CMFET) and it is used for the detection of deoxyribonucleic acid (DNA) hybridization. With the available CMOS technology, it allows the realization of complete systems which integrate the sensing units and transducing elements in the same device. Point-of-care (POC) testing device is a device that allows anyone to operate anywhere and obtain immediate results. One of the important features of POC device is low power consumption because it is normally battery-operated. The power consumption of the proposed integrated CMOS detection circuit requires only 14.87 mW. The detection circuit will amplify the electrical signal that comes from the CMFET to a specified level in order to improve the recording characteristics of the biosensor. Self-cascode topology was used in the drain follower circuit in order to reduce the channel length modulation effect. The proposed detection circuit was designed with 0.18µm Silterra CMOS fabrication process and simulated under Cadence Simulation Tool. 

scholarly journals DIGITAL CONTROLLED OSCILLATOR (DCO) FOR ALL DIGITAL PHASE-LOCKED LOOP (ADPLL) – A REVIEW

2019 ◽  
Vol 82 (1) ◽  
Author(s):  
Florence Choong ◽  
Mamun Ibne Reaz ◽  
Mohamad Ibrahim Kamaruzzaman ◽  
Md. Torikul Islam Badal ◽  
Araf Farayez ◽  
...  
Keyword(s):  
Supply Voltage ◽  
Complementary Metal Oxide Semiconductor ◽  
Phase Locked Loop ◽  
Cmos Technology ◽  
Oxide Semiconductor ◽  
Cmos Process ◽  
Process Technology ◽  
Chip Area ◽  
Digital Phase ◽  
Low Power Dissipation

Digital controlled oscillator (DCO) is becoming an attractive replacement over the voltage control oscillator (VCO) with the advances of digital intensive research on all-digital phase locked-loop (ADPLL) in complementary metal-oxide semiconductor (CMOS) process technology. This paper presents a review of various CMOS DCO schemes implemented in ADPLL and relationship between the DCO parameters with ADPLL performance. The DCO architecture evaluated through its power consumption, speed, chip area, frequency range, supply voltage, portability and resolution. It can be concluded that even though there are various schemes of DCO that have been implemented for ADPLL, the selection of the DCO is frequently based on the ADPLL applications and the complexity of the scheme. The demand for the low power dissipation and high resolution DCO in CMOS technology shall remain a challenging and active area of research for years to come. Thus, this review shall work as a guideline for the researchers who wish to work on all digital PLL.

A New Technique for Designing Low-Power High-Speed Domino Logic Circuits in FinFET Technology

2019 ◽  
Vol 28 (10) ◽  
pp. 1950165 ◽  
Author(s):  
Sandeep Garg ◽  
Tarun K. Gupta
Keyword(s):  
Low Power ◽  
High Speed ◽  
Supply Voltage ◽  
Complementary Metal Oxide Semiconductor ◽  
Cmos Technology ◽  
Power Reduction ◽  
Maximum Power ◽  
Oxide Semiconductor ◽  
Domino Logic ◽  
Maximum Delay

In this paper, a fin field-effect transistor (FinFET)-based domino technique dynamic node-driven feedback transistor domino logic (DNDFTDL) is designed for low-power, high-speed and improved noise performance. In the proposed domino technique, the concept of current division is explored below the evaluation network for enhancement of performance parameters. Simulations are carried out for 32-nm complementary metal–oxide–semiconductor (CMOS) and FinFET node using HSPICE for 2-, 4-, 8- and 16-input OR gates with a DC supply voltage of 0.9[Formula: see text]V. Proposed technique shows a maximum power reduction of 73.93% in FinFET short-gate (SG) mode as compared to conditional stacked keeper domino logic (CSKDL) technique and a maximum power reduction of 72.12% as compared to modified high-speed clocked delay domino logic (M-HSCD) technique in FinFET low-power (LP) mode. The proposed technique shows a maximum delay reduction of 35.52% as compared to voltage comparison domino (VCD) technique in SG mode and a reduction of 25.01% as compared to current mirror footed domino logic (CMFD) technique in LP mode. The unity noise gain (UNG) of the proposed circuit is 1.72–[Formula: see text] higher compared to different existing techniques in FinFET SG mode and is 1.42–[Formula: see text] higher in FinFET LP mode. The Figure of Merit (FOM) of the proposed circuit is up to [Formula: see text] higher as compared to existing domino logic techniques because of lower values of power, delay and area and higher values of UNG of the proposed circuit. In addition, the proposed technique shows a maximum power reduction of up to 68.64% in FinFET technology as compared to its counterpart in CMOS technology.

A 4:1 multiplexer using low-power high-speed domino technique for large fan-in gates using FinFET

Circuit World ◽  
2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Sandeep Garg ◽  
Tarun Kumar Gupta
Keyword(s):  
Low Power ◽  
High Speed ◽  
Supply Voltage ◽  
Average Power ◽  
Complementary Metal Oxide Semiconductor ◽  
Propagation Delay ◽  
Oxide Semiconductor ◽  
Content Type ◽  
Maximum Delay ◽  
Average Power Consumption

Purpose This paper aims to propose a new fin field-effect transistor (FinFET)-based domino technique low-power series connected foot-driven transistors logic in 32 nm technology and examine its performance parameters by performing transient analysis. Design/methodology/approach In the proposed technique, the leakage current is reduced at footer node by a division of current to improve the performance of the circuit in terms of average power consumption, propagation delay and noise margin. Simulation of existing and proposed techniques are carried out in FinFET and complementary metal-oxide semiconductor technology at FinFET 32 nm technology for 2-, 4-, 8- and 16-input domino OR gates on a supply voltage of 0.9 V using HSPICE. Findings The proposed technique shows maximum power reduction of 77.74% in FinFET short gate (SG) mode in comparison with current-mirror-based process variation tolerant (CPVT) technique and maximum delay reduction of 51.34% in low power (LP) mode in comparison with CPVT technique at a frequency of 100 MHz. The unity noise gain of the proposed circuit is 1.10× to 1.54× higher in comparison with different existing techniques in FinFET SG mode and 1.11× to 1.71× higher in FinFET LP mode. The figure of merit of the proposed circuit is up to 15.77× higher in comparison with existing domino techniques. Originality/value The research proposes a new FinFET-based domino technique and shows improvement in power, delay, area and noise performance. The proposed design can be used for implementing high-speed digital circuits such as microprocessors and memories.

SINUSOIDAL CLOCKED SENSE-AMPLIFIER-BASED ENERGY RECOVERY FLIP-FLOPS

2014 ◽  
Vol 23 (05) ◽  
pp. 1450066
Author(s):  
JITENDRA KANUNGO ◽  
S. DASGUPTA
Keyword(s):  
Low Power ◽  
Circuit Design ◽  
Energy Recovery ◽  
Cmos Technology ◽  
Digital Circuit ◽  
Flip Flop ◽  
Ultra Low Power ◽  
Sense Amplifier ◽  
Simulation Based ◽  
Digital Circuit Design

Energy recovery clocking is an ultimate solution to the ultra low power sequential digital circuit design. In this paper, we present a new slave latch for a sense-amplifier based flip-flop (SAFF). Energy recovery sinusoidal clock is applied to the low power SAFF. Extensive simulation based comparisons among reported and proposed SAFF are carried-out at 90 nm CMOS technology node. The proposed flip-flop operating with energy recovery single phase sinusoidal clock shows better performance. The proposed flip-flop also reduces the leakage current and glitch.

scholarly journals Design and Performance Analysis of Low Power High Speed 4x4 CNTFET Binary Content Addressable Memory Array

2019 ◽  
Vol 9 (1) ◽  
pp. 5962-5965
Keyword(s):  
Performance Analysis ◽  
Low Power ◽  
High Speed ◽  
Peak Power ◽  
Average Power ◽  
Complementary Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Content Addressable Memory ◽  
Power Peak ◽  
And Performance

In this paper, Carbon Nanotube Field Effect Transistor (CNTFET) based Binary Content Addressable Memory (BCAM) array is presented. The CAM array comprises of address decoders, encoders, data drivers and BCAM cells. Performance analysis is carried for 4X4 BCAM array. Each BCAM cell is designed based on adiabatic logic with optimum CNTFET parameter for low power and high speed applications. The performance of proposed BCAM array is analyzed for average power, peak power and search delay. The proposed CNTFET based BCAM array show improvement in the performance compared to that of complementary metal oxide semiconductor (CMOS) based BCAM array. The average power and peak power of the proposed 4x4 CNTFET BCAM array are in the range of micro watt (µW) while it is in the range of milli watt (mW) for CMOS based BCAM array. The search delay of the proposed 4X4 CNTFET BCAM array is improved by 32.3% compared to that of CMOS based BCAM array. All simulations are conducted for both CNTFET and CMOS based BCAM cells, BCAM array in HSPICE at 32 nm technology.

scholarly journals The Mixed Logic Style based Low Power and High Speed 3-2 Compressor for ASIC designs at 32nm Technology

2019 ◽  
Vol 9 (1) ◽  
pp. 43-49
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
High Speed ◽  
Average Power ◽  
Complementary Metal Oxide Semiconductor ◽  
Building Blocks ◽  
Propagation Delay ◽  
Oxide Semiconductor ◽  
Logic Design ◽  
Average Power Consumption

Compressors are the fundamental building blocks to construct Data Processing arithmetic units. A novel 3-2 Compressor is presented in this paper which is designed by Mixed logic design style. In addition to small size transistors and reduced transistor activity compared to conventional CMOS (Complementary Metal Oxide Semiconductor) gates, it provides the priority between the High logic and Low logic for the computation of the output. Various logic topologies are used to design the 3-2 compressor like High-Skew(Hi-Skew), Low-Skew(Li-Skew), TGL (Transmission Gate Logic) and DVL (Dual value Logic). This new approach gives the better operating speed, low power consumption compared to conventional logic design by reducing the transistors activity, improving the driving capability and reduced input capacitance with skew gates. Especially the Mixed logic style-3 provides 92.39% average power consumption and Propagation Delay of 99.59% at 0.8v. The H-SPICE simulation tool is used for construction and evaluation of compressor logic at different voltages. 32nm model file is used for MOS transistors

Sign in / Sign up

Export Citation Format

Share Document